* [RESEND PATCH v3] imx8mm_venice: switch to use binman to pack images
@ 2022-01-07 21:38 Tim Harvey
2022-01-08 2:08 ` Tom Rini
0 siblings, 1 reply; 2+ messages in thread
From: Tim Harvey @ 2022-01-07 21:38 UTC (permalink / raw)
To: Stefano Babic, Fabio Estevam, NXP i . MX U-Boot Team, Tom Rini, u-boot
Cc: Tim Harvey
Use binman to pack images.
Note that imx8mm_venice supports several boards via multiple DTB's thus
in the fit node we must use:
- fit,fdt-list = "of-list"
- fdt-SEQ
- config-SEQ
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
v3:
- resent as I forgot to include the uboot list
- rebase on top of Marcel's patch:
"arm64: dts: imx8mm: use common binman configuration"
v2:
- rebase on origin/mater
- remove ATF_LOAD_ADDR from README as its no longer needed
---
arch/arm/mach-imx/imx8m/Kconfig | 1 +
board/gateworks/venice/Kconfig | 3 +--
board/gateworks/venice/README | 2 +-
board/gateworks/venice/imximage-8mm-lpddr4.cfg | 9 +++++++++
configs/imx8mm_venice_defconfig | 4 ++--
5 files changed, 14 insertions(+), 5 deletions(-)
create mode 100644 board/gateworks/venice/imximage-8mm-lpddr4.cfg
diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index d630a73f13ba..d6a869068a3c 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -73,6 +73,7 @@ config TARGET_IMX8MM_ICORE_MX8MM
config TARGET_IMX8MM_VENICE
bool "Support Gateworks Venice iMX8M Mini module"
+ select BINMAN
select IMX8MM
select SUPPORT_SPL
select IMX8M_LPDDR4
diff --git a/board/gateworks/venice/Kconfig b/board/gateworks/venice/Kconfig
index 639bf35d2050..687b94f24dd3 100644
--- a/board/gateworks/venice/Kconfig
+++ b/board/gateworks/venice/Kconfig
@@ -10,6 +10,5 @@ config SYS_CONFIG_NAME
default "imx8mm_venice"
config IMX_CONFIG
- default "arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg"
-
+ default "board/gateworks/venice/imximage-8mm-lpddr4.cfg"
endif
diff --git a/board/gateworks/venice/README b/board/gateworks/venice/README
index 6a0ab1ef10ac..773cc09e8724 100644
--- a/board/gateworks/venice/README
+++ b/board/gateworks/venice/README
@@ -25,7 +25,7 @@ $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin .
Build U-Boot
============
$ make imx8mm_venice_defconfig
-$ make flash.bin CROSS_COMPILE=aarch64-linux-gnu- ATF_LOAD_ADDR=0x920000
+$ make CROSS_COMPILE=aarch64-linux-gnu-
Update eMMC
===========
diff --git a/board/gateworks/venice/imximage-8mm-lpddr4.cfg b/board/gateworks/venice/imximage-8mm-lpddr4.cfg
new file mode 100644
index 000000000000..ccaa765cb7d4
--- /dev/null
+++ b/board/gateworks/venice/imximage-8mm-lpddr4.cfg
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2021 Gateworks Corporation
+ */
+
+#define __ASSEMBLY__
+
+BOOT_FROM sd
+LOADER u-boot-spl-ddr.bin 0x7E1000
diff --git a/configs/imx8mm_venice_defconfig b/configs/imx8mm_venice_defconfig
index c4c75d2a38eb..6f522880d70d 100644
--- a/configs/imx8mm_venice_defconfig
+++ b/configs/imx8mm_venice_defconfig
@@ -25,7 +25,7 @@ CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
# CONFIG_USE_BOOTCOMMAND is not set
@@ -56,7 +56,7 @@ CONFIG_CMD_EXT4_WRITE=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_LIST="imx8mm-venice-gw71xx-0x imx8mm-venice-gw72xx-0x imx8mm-venice-gw73xx-0x imx8mm-venice-gw7901 imx8mm-venice-gw7902"
+CONFIG_OF_LIST="imx8mm-venice imx8mm-venice-gw71xx-0x imx8mm-venice-gw72xx-0x imx8mm-venice-gw73xx-0x imx8mm-venice-gw7901 imx8mm-venice-gw7902"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
--
2.17.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [RESEND PATCH v3] imx8mm_venice: switch to use binman to pack images
2022-01-07 21:38 [RESEND PATCH v3] imx8mm_venice: switch to use binman to pack images Tim Harvey
@ 2022-01-08 2:08 ` Tom Rini
0 siblings, 0 replies; 2+ messages in thread
From: Tom Rini @ 2022-01-08 2:08 UTC (permalink / raw)
To: Tim Harvey; +Cc: Stefano Babic, Fabio Estevam, NXP i . MX U-Boot Team, u-boot
[-- Attachment #1: Type: text/plain, Size: 431 bytes --]
On Fri, Jan 07, 2022 at 01:38:41PM -0800, Tim Harvey wrote:
> Use binman to pack images.
>
> Note that imx8mm_venice supports several boards via multiple DTB's thus
> in the fit node we must use:
> - fit,fdt-list = "of-list"
> - fdt-SEQ
> - config-SEQ
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied to u-boot/master, thanks!
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-01-08 2:08 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-07 21:38 [RESEND PATCH v3] imx8mm_venice: switch to use binman to pack images Tim Harvey
2022-01-08 2:08 ` Tom Rini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).