From: Samuel Holland <samuel@sholland.org>
To: u-boot@lists.denx.de, Jagan Teki <jagan@amarulasolutions.com>,
Andre Przywara <andre.przywara@arm.com>
Cc: Samuel Holland <samuel@sholland.org>,
Joe Hershberger <joe.hershberger@ni.com>
Subject: [PATCH 1/4] sunxi: Move INITIAL_USB_SCAN_DELAY to driver Kconfig
Date: Thu, 14 Jul 2022 23:09:19 -0500 [thread overview]
Message-ID: <20220715040922.451-2-samuel@sholland.org> (raw)
In-Reply-To: <20220715040922.451-1-samuel@sholland.org>
This option is used only by the phy-sun4i-usb driver, which does not
inherently depend on the ARM architecture.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
arch/arm/mach-sunxi/Kconfig | 9 ---------
drivers/phy/allwinner/Kconfig | 10 ++++++++++
2 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 71a7f8dcee06..4a833d37a841 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -679,15 +679,6 @@ config MMC_SUNXI_SLOT_EXTRA
slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable
support for this.
-config INITIAL_USB_SCAN_DELAY
- int "delay initial usb scan by x ms to allow builtin devices to init"
- default 0
- ---help---
- Some boards have on board usb devices which need longer than the
- USB spec's 1 second to connect from board powerup. Set this config
- option to a non 0 value to add an extra delay before the first usb
- bus scan.
-
config USB0_VBUS_PIN
string "Vbus enable pin for usb0 (otg)"
default ""
diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig
index d3ff82f73a00..f8f1e99c4f52 100644
--- a/drivers/phy/allwinner/Kconfig
+++ b/drivers/phy/allwinner/Kconfig
@@ -13,6 +13,16 @@ config PHY_SUN4I_USB
This driver controls the entire USB PHY block, both the USB OTG
parts, as well as the 2 regular USB 2 host PHYs.
+config INITIAL_USB_SCAN_DELAY
+ int "Delay initial USB scan by x ms to allow builtin devices to init"
+ depends on PHY_SUN4I_USB
+ default 0
+ help
+ Some boards have on board usb devices which need longer than
+ the USB spec's 1 second to connect from board powerup. Set
+ this option to a nonzero value to add an extra delay before
+ the first USB bus scan.
+
config PHY_SUN50I_USB3
bool "Allwinner sun50i USB3 PHY driver"
depends on ARCH_SUNXI
--
2.35.1
next prev parent reply other threads:[~2022-07-15 4:09 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-15 4:09 [PATCH 0/4] phy: sun4i-usb: Allwinner D1 Support Samuel Holland
2022-07-15 4:09 ` Samuel Holland [this message]
2022-07-15 9:15 ` [PATCH 1/4] sunxi: Move INITIAL_USB_SCAN_DELAY to driver Kconfig Jagan Teki
2022-07-15 4:09 ` [PATCH 2/4] phy: sun4i-usb: Drop use of arch-specific headers Samuel Holland
2022-07-15 9:15 ` Jagan Teki
2022-07-15 4:09 ` [PATCH 3/4] phy: sun4i-usb: Rework HCI PHY (aka "pmu_unk1") handling Samuel Holland
2022-07-15 9:16 ` Jagan Teki
2022-07-15 4:09 ` [PATCH 4/4] phy: sun4i-usb: Add D1 variant Samuel Holland
2022-07-15 9:16 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220715040922.451-2-samuel@sholland.org \
--to=samuel@sholland.org \
--cc=andre.przywara@arm.com \
--cc=jagan@amarulasolutions.com \
--cc=joe.hershberger@ni.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).