* [PATCH 0/2] Add quad & octal spi flash mini u-boot configuration files
@ 2022-09-30 8:55 Ashok Reddy Soma
2022-09-30 8:55 ` [PATCH 1/2] arm64: versal: Add qspi flash mini u-boot configuration Ashok Reddy Soma
2022-09-30 8:55 ` [PATCH 2/2] arm64: versal: Add octal spi " Ashok Reddy Soma
0 siblings, 2 replies; 5+ messages in thread
From: Ashok Reddy Soma @ 2022-09-30 8:55 UTC (permalink / raw)
To: u-boot; +Cc: michal.simek, git, Ashok Reddy Soma
Add new configuration files for quad and octal spi flash mini u-boot.
With these configs's mini u-boot will run from on chip memory(OCM) and
uses DCC terminal for console output.
Ashok Reddy Soma (2):
arm64: versal: Add qspi flash mini u-boot configuration
arm64: versal: Add octal spi flash mini u-boot configuration
MAINTAINERS | 1 +
configs/xilinx_versal_mini_ospi_defconfig | 71 ++++++++++++++++++++++
configs/xilinx_versal_mini_qspi_defconfig | 74 +++++++++++++++++++++++
3 files changed, 146 insertions(+)
create mode 100644 configs/xilinx_versal_mini_ospi_defconfig
create mode 100644 configs/xilinx_versal_mini_qspi_defconfig
--
2.17.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] arm64: versal: Add qspi flash mini u-boot configuration
2022-09-30 8:55 [PATCH 0/2] Add quad & octal spi flash mini u-boot configuration files Ashok Reddy Soma
@ 2022-09-30 8:55 ` Ashok Reddy Soma
2022-10-04 12:48 ` Michal Simek
2022-09-30 8:55 ` [PATCH 2/2] arm64: versal: Add octal spi " Ashok Reddy Soma
1 sibling, 1 reply; 5+ messages in thread
From: Ashok Reddy Soma @ 2022-09-30 8:55 UTC (permalink / raw)
To: u-boot; +Cc: michal.simek, git, Ashok Reddy Soma
Add configuration file for mini u-boot configuration which runs on a
smaller footprint from on chip memory(OCM). This configuration has
required CONFIG's enabled to support qspi flash and uses DCC terminal
for console output.
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
---
MAINTAINERS | 1 +
configs/xilinx_versal_mini_qspi_defconfig | 74 +++++++++++++++++++++++
2 files changed, 75 insertions(+)
create mode 100644 configs/xilinx_versal_mini_qspi_defconfig
diff --git a/MAINTAINERS b/MAINTAINERS
index 83346183ee..70ad67a0ce 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -634,6 +634,7 @@ M: Michal Simek <michal.simek@amd.com>
S: Maintained
T: git https://source.denx.de/u-boot/custodians/u-boot-microblaze.git
F: arch/arm/mach-versal/
+F: configs/xilinx_*
F: drivers/net/xilinx_axi_mrmac.*
F: drivers/soc/soc_xilinx_versal.c
F: drivers/spi/cadence_ospi_versal.c
diff --git a/configs/xilinx_versal_mini_qspi_defconfig b/configs/xilinx_versal_mini_qspi_defconfig
new file mode 100644
index 0000000000..bb53e6c913
--- /dev/null
+++ b/configs/xilinx_versal_mini_qspi_defconfig
@@ -0,0 +1,74 @@
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="xilinx_versal_mini_qspi"
+CONFIG_ARCH_VERSAL=y
+CONFIG_SYS_TEXT_BASE=0xFFFC0000
+CONFIG_SYS_MALLOC_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x80
+CONFIG_DEFAULT_DEVICE_TREE="versal-mini-qspi-single"
+CONFIG_SYS_MEM_RSVD_FOR_MMU=y
+CONFIG_COUNTER_FREQUENCY=100000000
+CONFIG_VERSAL_NO_DDR=y
+# CONFIG_PSCI_RESET is not set
+# CONFIG_EXPERT is not set
+CONFIG_SYS_LOAD_ADDR=0x8000000
+# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+# CONFIG_AUTOBOOT is not set
+CONFIG_LOGLEVEL=0
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_R=y
+# CONFIG_BOARD_LATE_INIT is not set
+# CONFIG_CMDLINE_EDITING is not set
+# CONFIG_AUTO_COMPLETE is not set
+# CONFIG_SYS_LONGHELP is not set
+CONFIG_SYS_PROMPT="Versal> "
+# CONFIG_SYS_XTRACE is not set
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_BOOTM is not set
+# CONFIG_CMD_BOOTI is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_FDT is not set
+# CONFIG_CMD_GO is not set
+# CONFIG_CMD_RUN is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_CRC32 is not set
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_ECHO is not set
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SOURCE is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_PARTITIONS is not set
+# CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG is not set
+# CONFIG_NET is not set
+# CONFIG_DM_WARN is not set
+# CONFIG_DM_DEVICE_REMOVE is not set
+# CONFIG_GPIO is not set
+# CONFIG_I2C is not set
+# CONFIG_INPUT is not set
+# CONFIG_MMC is not set
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=30000000
+# CONFIG_SPI_FLASH_SMART_HWCAPS is not set
+# CONFIG_SPI_FLASH_UNLOCK_ALL is not set
+CONFIG_SPI_FLASH_ISSI=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+# CONFIG_POWER is not set
+CONFIG_ARM_DCC=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_ZYNQMP_GQSPI=y
+# CONFIG_LMB is not set
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] arm64: versal: Add octal spi flash mini u-boot configuration
2022-09-30 8:55 [PATCH 0/2] Add quad & octal spi flash mini u-boot configuration files Ashok Reddy Soma
2022-09-30 8:55 ` [PATCH 1/2] arm64: versal: Add qspi flash mini u-boot configuration Ashok Reddy Soma
@ 2022-09-30 8:55 ` Ashok Reddy Soma
1 sibling, 0 replies; 5+ messages in thread
From: Ashok Reddy Soma @ 2022-09-30 8:55 UTC (permalink / raw)
To: u-boot; +Cc: michal.simek, git, Ashok Reddy Soma
Add configuration file for mini u-boot configuration which runs on a
smaller footprint from on chip memory(OCM). This configuration has
required CONFIG's enabled to support octal spi flash and uses DCC terminal
for console output.
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
---
configs/xilinx_versal_mini_ospi_defconfig | 71 +++++++++++++++++++++++
1 file changed, 71 insertions(+)
create mode 100644 configs/xilinx_versal_mini_ospi_defconfig
diff --git a/configs/xilinx_versal_mini_ospi_defconfig b/configs/xilinx_versal_mini_ospi_defconfig
new file mode 100644
index 0000000000..7212c38083
--- /dev/null
+++ b/configs/xilinx_versal_mini_ospi_defconfig
@@ -0,0 +1,71 @@
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="xilinx_versal_mini_qspi"
+CONFIG_ARCH_VERSAL=y
+CONFIG_SYS_TEXT_BASE=0xFFFC0000
+CONFIG_SYS_MALLOC_LEN=0x2000
+CONFIG_SYS_MALLOC_F_LEN=0x500
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x80
+# CONFIG_DM_GPIO is not set
+CONFIG_DEFAULT_DEVICE_TREE="versal-mini-ospi-single"
+CONFIG_SYS_MEM_RSVD_FOR_MMU=y
+CONFIG_COUNTER_FREQUENCY=100000000
+CONFIG_VERSAL_NO_DDR=y
+# CONFIG_PSCI_RESET is not set
+# CONFIG_EXPERT is not set
+CONFIG_SYS_LOAD_ADDR=0x8000000
+# CONFIG_AUTOBOOT is not set
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_BOARD_EARLY_INIT_R=y
+# CONFIG_BOARD_LATE_INIT is not set
+# CONFIG_CMDLINE_EDITING is not set
+# CONFIG_AUTO_COMPLETE is not set
+# CONFIG_SYS_LONGHELP is not set
+CONFIG_SYS_PROMPT="Versal> "
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_BOOTM is not set
+# CONFIG_CMD_BOOTI is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_FDT is not set
+# CONFIG_CMD_GO is not set
+# CONFIG_CMD_RUN is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_CRC32 is not set
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_ECHO is not set
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SOURCE is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_PARTITIONS is not set
+# CONFIG_NET is not set
+# CONFIG_DM_WARN is not set
+# CONFIG_DM_DEVICE_REMOVE is not set
+# CONFIG_MMC is not set
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=30000000
+CONFIG_SPI_FLASH_SOFT_RESET=y
+CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_ISSI=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MT35XU=y
+CONFIG_ARM_DCC=y
+CONFIG_SOC_XILINX_VERSAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_CADENCE_OSPI_VERSAL=y
+CONFIG_HAS_CQSPI_REF_CLK=y
+CONFIG_CQSPI_REF_CLK=200000000
+# CONFIG_LMB is not set
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] arm64: versal: Add qspi flash mini u-boot configuration
2022-09-30 8:55 ` [PATCH 1/2] arm64: versal: Add qspi flash mini u-boot configuration Ashok Reddy Soma
@ 2022-10-04 12:48 ` Michal Simek
2022-10-12 7:01 ` Soma, Ashok Reddy
0 siblings, 1 reply; 5+ messages in thread
From: Michal Simek @ 2022-10-04 12:48 UTC (permalink / raw)
To: Ashok Reddy Soma, u-boot; +Cc: git
On 9/30/22 10:55, Ashok Reddy Soma wrote:
> Add configuration file for mini u-boot configuration which runs on a
> smaller footprint from on chip memory(OCM). This configuration has
> required CONFIG's enabled to support qspi flash and uses DCC terminal
> for console output.
>
> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
> ---
>
> MAINTAINERS | 1 +
> configs/xilinx_versal_mini_qspi_defconfig | 74 +++++++++++++++++++++++
> 2 files changed, 75 insertions(+)
> create mode 100644 configs/xilinx_versal_mini_qspi_defconfig
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 83346183ee..70ad67a0ce 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -634,6 +634,7 @@ M: Michal Simek <michal.simek@amd.com>
> S: Maintained
> T: git https://source.denx.de/u-boot/custodians/u-boot-microblaze.git
> F: arch/arm/mach-versal/
> +F: configs/xilinx_*
this is not needed because it is already the part of
board/xilinx/versal/MAINTAINERS fragment.
> F: drivers/net/xilinx_axi_mrmac.*
> F: drivers/soc/soc_xilinx_versal.c
> F: drivers/spi/cadence_ospi_versal.c
> diff --git a/configs/xilinx_versal_mini_qspi_defconfig b/configs/xilinx_versal_mini_qspi_defconfig
> new file mode 100644
> index 0000000000..bb53e6c913
> --- /dev/null
> +++ b/configs/xilinx_versal_mini_qspi_defconfig
> @@ -0,0 +1,74 @@
> +CONFIG_ARM=y
> +CONFIG_SYS_CONFIG_NAME="xilinx_versal_mini_qspi"
> +CONFIG_ARCH_VERSAL=y
> +CONFIG_SYS_TEXT_BASE=0xFFFC0000
> +CONFIG_SYS_MALLOC_LEN=0x2000
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_ENV_SIZE=0x80
> +CONFIG_DEFAULT_DEVICE_TREE="versal-mini-qspi-single"
> +CONFIG_SYS_MEM_RSVD_FOR_MMU=y
> +CONFIG_COUNTER_FREQUENCY=100000000
> +CONFIG_VERSAL_NO_DDR=y
> +# CONFIG_PSCI_RESET is not set
> +# CONFIG_EXPERT is not set
> +CONFIG_SYS_LOAD_ADDR=0x8000000
> +# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
> +# CONFIG_AUTOBOOT is not set
> +CONFIG_LOGLEVEL=0
> +CONFIG_SYS_CONSOLE_INFO_QUIET=y
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_BOARD_EARLY_INIT_R=y
> +# CONFIG_BOARD_LATE_INIT is not set
> +# CONFIG_CMDLINE_EDITING is not set
> +# CONFIG_AUTO_COMPLETE is not set
> +# CONFIG_SYS_LONGHELP is not set
> +CONFIG_SYS_PROMPT="Versal> "
> +# CONFIG_SYS_XTRACE is not set
> +# CONFIG_CMD_BDI is not set
> +# CONFIG_CMD_CONSOLE is not set
> +# CONFIG_CMD_BOOTD is not set
> +# CONFIG_CMD_BOOTM is not set
> +# CONFIG_CMD_BOOTI is not set
> +# CONFIG_CMD_ELF is not set
> +# CONFIG_CMD_FDT is not set
> +# CONFIG_CMD_GO is not set
> +# CONFIG_CMD_RUN is not set
> +# CONFIG_CMD_IMI is not set
> +# CONFIG_CMD_XIMG is not set
> +# CONFIG_CMD_EXPORTENV is not set
> +# CONFIG_CMD_IMPORTENV is not set
> +# CONFIG_CMD_EDITENV is not set
> +# CONFIG_CMD_SAVEENV is not set
> +# CONFIG_CMD_ENV_EXISTS is not set
> +# CONFIG_CMD_CRC32 is not set
> +# CONFIG_CMD_LOADB is not set
> +# CONFIG_CMD_LOADS is not set
> +# CONFIG_CMD_ECHO is not set
> +# CONFIG_CMD_ITEST is not set
> +# CONFIG_CMD_SOURCE is not set
> +# CONFIG_CMD_SETEXPR is not set
> +# CONFIG_PARTITIONS is not set
> +# CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG is not set
> +# CONFIG_NET is not set
> +# CONFIG_DM_WARN is not set
> +# CONFIG_DM_DEVICE_REMOVE is not set
> +# CONFIG_GPIO is not set
> +# CONFIG_I2C is not set
> +# CONFIG_INPUT is not set
> +# CONFIG_MMC is not set
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SF_DEFAULT_SPEED=30000000
> +# CONFIG_SPI_FLASH_SMART_HWCAPS is not set
> +# CONFIG_SPI_FLASH_UNLOCK_ALL is not set
> +CONFIG_SPI_FLASH_ISSI=y
> +CONFIG_SPI_FLASH_MACRONIX=y
> +CONFIG_SPI_FLASH_SPANSION=y
> +CONFIG_SPI_FLASH_STMICRO=y
> +CONFIG_SPI_FLASH_WINBOND=y
> +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
> +# CONFIG_POWER is not set
> +CONFIG_ARM_DCC=y
> +CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_ZYNQMP_GQSPI=y
> +# CONFIG_LMB is not set
And please run savedefconfig for both patches to make sure that they are aligned
with the latest Kconfig layout.
M
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [PATCH 1/2] arm64: versal: Add qspi flash mini u-boot configuration
2022-10-04 12:48 ` Michal Simek
@ 2022-10-12 7:01 ` Soma, Ashok Reddy
0 siblings, 0 replies; 5+ messages in thread
From: Soma, Ashok Reddy @ 2022-10-12 7:01 UTC (permalink / raw)
To: Simek, Michal, u-boot; +Cc: git (AMD-Xilinx)
Hi Michal,
>-----Original Message-----
>From: Simek, Michal <michal.simek@amd.com>
>Sent: Tuesday, October 4, 2022 6:19 PM
>To: Soma, Ashok Reddy <ashok.reddy.soma@amd.com>; u-boot@lists.denx.de
>Cc: git (AMD-Xilinx) <git@amd.com>
>Subject: Re: [PATCH 1/2] arm64: versal: Add qspi flash mini u-boot configuration
>
>
>
>On 9/30/22 10:55, Ashok Reddy Soma wrote:
>> Add configuration file for mini u-boot configuration which runs on a
>> smaller footprint from on chip memory(OCM). This configuration has
>> required CONFIG's enabled to support qspi flash and uses DCC terminal
>> for console output.
>>
>> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com>
>> ---
>>
>> MAINTAINERS | 1 +
>> configs/xilinx_versal_mini_qspi_defconfig | 74 +++++++++++++++++++++++
>> 2 files changed, 75 insertions(+)
>> create mode 100644 configs/xilinx_versal_mini_qspi_defconfig
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS index 83346183ee..70ad67a0ce
>> 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -634,6 +634,7 @@ M: Michal Simek <michal.simek@amd.com>
>> S: Maintained
>> T: git https://source.denx.de/u-boot/custodians/u-boot-microblaze.git
>> F: arch/arm/mach-versal/
>> +F: configs/xilinx_*
>
>this is not needed because it is already the part of board/xilinx/versal/MAINTAINERS fragment.
Ok, I will remove it.
>
>> F: drivers/net/xilinx_axi_mrmac.*
>> F: drivers/soc/soc_xilinx_versal.c
>> F: drivers/spi/cadence_ospi_versal.c
>> diff --git a/configs/xilinx_versal_mini_qspi_defconfig
>> b/configs/xilinx_versal_mini_qspi_defconfig
>> new file mode 100644
>> index 0000000000..bb53e6c913
>> --- /dev/null
>> +++ b/configs/xilinx_versal_mini_qspi_defconfig
>> @@ -0,0 +1,74 @@
>> +CONFIG_ARM=y
>> +CONFIG_SYS_CONFIG_NAME="xilinx_versal_mini_qspi"
>> +CONFIG_ARCH_VERSAL=y
>> +CONFIG_SYS_TEXT_BASE=0xFFFC0000
>> +CONFIG_SYS_MALLOC_LEN=0x2000
>> +CONFIG_NR_DRAM_BANKS=1
>> +CONFIG_ENV_SIZE=0x80
>> +CONFIG_DEFAULT_DEVICE_TREE="versal-mini-qspi-single"
>> +CONFIG_SYS_MEM_RSVD_FOR_MMU=y
>> +CONFIG_COUNTER_FREQUENCY=100000000
>> +CONFIG_VERSAL_NO_DDR=y
>> +# CONFIG_PSCI_RESET is not set
>> +# CONFIG_EXPERT is not set
>> +CONFIG_SYS_LOAD_ADDR=0x8000000
>> +# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set # CONFIG_AUTOBOOT is not
>> +set
>> +CONFIG_LOGLEVEL=0
>> +CONFIG_SYS_CONSOLE_INFO_QUIET=y
>> +# CONFIG_DISPLAY_CPUINFO is not set
>> +CONFIG_BOARD_EARLY_INIT_R=y
>> +# CONFIG_BOARD_LATE_INIT is not set
>> +# CONFIG_CMDLINE_EDITING is not set
>> +# CONFIG_AUTO_COMPLETE is not set
>> +# CONFIG_SYS_LONGHELP is not set
>> +CONFIG_SYS_PROMPT="Versal> "
>> +# CONFIG_SYS_XTRACE is not set
>> +# CONFIG_CMD_BDI is not set
>> +# CONFIG_CMD_CONSOLE is not set
>> +# CONFIG_CMD_BOOTD is not set
>> +# CONFIG_CMD_BOOTM is not set
>> +# CONFIG_CMD_BOOTI is not set
>> +# CONFIG_CMD_ELF is not set
>> +# CONFIG_CMD_FDT is not set
>> +# CONFIG_CMD_GO is not set
>> +# CONFIG_CMD_RUN is not set
>> +# CONFIG_CMD_IMI is not set
>> +# CONFIG_CMD_XIMG is not set
>> +# CONFIG_CMD_EXPORTENV is not set
>> +# CONFIG_CMD_IMPORTENV is not set
>> +# CONFIG_CMD_EDITENV is not set
>> +# CONFIG_CMD_SAVEENV is not set
>> +# CONFIG_CMD_ENV_EXISTS is not set
>> +# CONFIG_CMD_CRC32 is not set
>> +# CONFIG_CMD_LOADB is not set
>> +# CONFIG_CMD_LOADS is not set
>> +# CONFIG_CMD_ECHO is not set
>> +# CONFIG_CMD_ITEST is not set
>> +# CONFIG_CMD_SOURCE is not set
>> +# CONFIG_CMD_SETEXPR is not set
>> +# CONFIG_PARTITIONS is not set
>> +# CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG is not set # CONFIG_NET is not
>> +set # CONFIG_DM_WARN is not set # CONFIG_DM_DEVICE_REMOVE is not set
>> +# CONFIG_GPIO is not set # CONFIG_I2C is not set # CONFIG_INPUT is
>> +not set # CONFIG_MMC is not set CONFIG_DM_SPI_FLASH=y
>> +CONFIG_SF_DEFAULT_SPEED=30000000
>> +# CONFIG_SPI_FLASH_SMART_HWCAPS is not set #
>> +CONFIG_SPI_FLASH_UNLOCK_ALL is not set CONFIG_SPI_FLASH_ISSI=y
>> +CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y
>> +CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y #
>> +CONFIG_SPI_FLASH_USE_4K_SECTORS is not set # CONFIG_POWER is not set
>> +CONFIG_ARM_DCC=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_ZYNQMP_GQSPI=y #
>> +CONFIG_LMB is not set
>
>And please run savedefconfig for both patches to make sure that they are aligned with the latest Kconfig layout.
Sure, I will send v2 after running savedefconfig.
M
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2022-10-12 7:01 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-30 8:55 [PATCH 0/2] Add quad & octal spi flash mini u-boot configuration files Ashok Reddy Soma
2022-09-30 8:55 ` [PATCH 1/2] arm64: versal: Add qspi flash mini u-boot configuration Ashok Reddy Soma
2022-10-04 12:48 ` Michal Simek
2022-10-12 7:01 ` Soma, Ashok Reddy
2022-09-30 8:55 ` [PATCH 2/2] arm64: versal: Add octal spi " Ashok Reddy Soma
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).