u-boot.lists.denx.de archive mirror
 help / color / mirror / Atom feed
From: Chris Morgan <macroalpha82@gmail.com>
To: u-boot@lists.denx.de
Cc: heiko@sntech.de, sjg@chromium.org, philipp.tomsich@vrull.eu,
	kever.yang@rock-chips.com, chenjh@rock-chips.com,
	pgwipeout@gmail.com, heiko.stuebner@theobroma-systems.com,
	Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH V2 0/9] Rockchip: Improve Support for RK3566 Devices
Date: Mon, 13 Feb 2023 16:27:33 -0600	[thread overview]
Message-ID: <20230213222742.135093-1-macroalpha82@gmail.com> (raw)

From: Chris Morgan <macromorgan@hotmail.com>

This series is to lay the groundwork to improve support for the RK3566
based devices. This syncs the devicetrees with upstream Linux and adds
support for the pin controller of the rk356x series.

Future patches will be submitted that builds on top of this to support
devices such as the Anbernic RG353 and RG503 which are based on the
RK3566.

Changes Since V1:
 - Updated GPIO to parse bank ID from new property of "gpio-ranges"
   which should be included in upstream Linux soon.
 - Updated name of u-boot.dtsi file for the rk3568-evb1-v10.
 - Updated MAINTAINERS file for evb-rk3568 board.
 - Updated rockchip documentation for build instructions for
   rk3568 boards.
 - Removed links to patches co-authored by Peter Geis and instead
   included him in the tags.

Chris Morgan (9):
  gpio: gpio-rockchip: parse gpio-ranges for bank id
  dts: rockchip: px30: add gpio-ranges property to gpio nodes
  rockchip: vop2: Add vop2 dt-binding from Linux
  arm64: dts: rockchip: Sync rk356x from Linux main
  rockchip: rk3568: add boot device detection
  rockchip: rk3568: enable automatic power savings
  gpio/rockchip: rk_gpio support v2 gpio controller
  arm64: dts: rockchip: add gpio-ranges property to gpio nodes
  evb1-v10-rk3568: Update MAINTAINERS and documentation

 arch/arm/dts/Makefile                         |   2 +-
 arch/arm/dts/px30.dtsi                        |   4 +
 arch/arm/dts/rk3568-evb.dts                   |  79 --
 ...-boot.dtsi => rk3568-evb1-v10-u-boot.dtsi} |   0
 arch/arm/dts/rk3568-evb1-v10.dts              | 692 ++++++++++++++++++
 arch/arm/dts/rk3568.dtsi                      | 122 +++
 arch/arm/dts/rk356x.dtsi                      | 187 ++++-
 arch/arm/include/asm/arch-rockchip/gpio.h     |  38 +
 arch/arm/mach-rockchip/rk3568/rk3568.c        |  31 +
 board/rockchip/evb_rk3568/MAINTAINERS         |  12 +-
 ...68_defconfig => evb1-v10-rk3568_defconfig} |   4 +-
 doc/board/rockchip/rockchip.rst               |  10 +
 drivers/gpio/rk_gpio.c                        |  69 +-
 drivers/pinctrl/rockchip/Makefile             |   1 +
 drivers/pinctrl/rockchip/pinctrl-rk3568.c     | 453 ++++++++++++
 .../pinctrl/rockchip/pinctrl-rockchip-core.c  |  12 +-
 include/dt-bindings/soc/rockchip,vop2.h       |  14 +
 17 files changed, 1613 insertions(+), 117 deletions(-)
 delete mode 100644 arch/arm/dts/rk3568-evb.dts
 rename arch/arm/dts/{rk3568-evb-u-boot.dtsi => rk3568-evb1-v10-u-boot.dtsi} (100%)
 create mode 100644 arch/arm/dts/rk3568-evb1-v10.dts
 rename configs/{evb-rk3568_defconfig => evb1-v10-rk3568_defconfig} (94%)
 create mode 100644 drivers/pinctrl/rockchip/pinctrl-rk3568.c
 create mode 100644 include/dt-bindings/soc/rockchip,vop2.h

-- 
2.34.1


             reply	other threads:[~2023-02-13 22:28 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-13 22:27 Chris Morgan [this message]
2023-02-13 22:27 ` [PATCH V2 1/9] gpio: gpio-rockchip: parse gpio-ranges for bank id Chris Morgan
2023-02-22  7:44   ` Kever Yang
2023-02-22 10:59   ` Johan Jonker
2023-02-23  8:59   ` Linus Walleij
2023-03-02  2:54     ` Kever Yang
2023-03-02 13:59       ` Chris Morgan
2023-02-13 22:27 ` [PATCH V2 2/9] dts: rockchip: px30: add gpio-ranges property to gpio nodes Chris Morgan
2023-02-22  7:44   ` Kever Yang
2023-02-13 22:27 ` [PATCH V2 3/9] rockchip: vop2: Add vop2 dt-binding from Linux Chris Morgan
2023-02-13 22:27 ` [PATCH V2 4/9] arm64: dts: rockchip: Sync rk356x from Linux main Chris Morgan
2023-02-15 18:44   ` Jonas Karlman
2023-02-22  7:32     ` Kever Yang
2023-02-13 22:27 ` [PATCH V2 5/9] rockchip: rk3568: add boot device detection Chris Morgan
2023-02-15 18:28   ` Jonas Karlman
2023-02-22  7:45     ` Kever Yang
2023-02-13 22:27 ` [PATCH V2 6/9] rockchip: rk3568: enable automatic power savings Chris Morgan
2023-02-22  7:34   ` Kever Yang
2023-02-13 22:27 ` [PATCH V2 7/9] gpio/rockchip: rk_gpio support v2 gpio controller Chris Morgan
2023-02-16 11:19   ` FUKAUMI Naoki
2023-02-22  7:49   ` Kever Yang
2023-02-22  8:28   ` Kever Yang
2023-02-23 22:14   ` Vasily Khoruzhick
2023-03-01  8:25   ` Eugen Hristev
2023-03-01 15:02     ` Simon Glass
2023-02-13 22:27 ` [PATCH V2 8/9] arm64: dts: rockchip: add gpio-ranges property to gpio nodes Chris Morgan
2023-02-22  7:47   ` Kever Yang
2023-02-23 21:12   ` Vasily Khoruzhick
2023-02-28 11:26     ` Quentin Schulz
2023-03-02  2:49       ` Kever Yang
2023-03-07 19:14         ` Vasily Khoruzhick
2023-02-13 22:27 ` [PATCH V2 9/9] evb1-v10-rk3568: Update MAINTAINERS and documentation Chris Morgan
2023-02-22  7:48   ` Kever Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230213222742.135093-1-macroalpha82@gmail.com \
    --to=macroalpha82@gmail.com \
    --cc=chenjh@rock-chips.com \
    --cc=heiko.stuebner@theobroma-systems.com \
    --cc=heiko@sntech.de \
    --cc=kever.yang@rock-chips.com \
    --cc=macromorgan@hotmail.com \
    --cc=pgwipeout@gmail.com \
    --cc=philipp.tomsich@vrull.eu \
    --cc=sjg@chromium.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).