From: Stefan Roese <sr@denx.de>
To: Tom Rini <trini@konsulko.com>,
U-Boot Mailing List <u-boot@lists.denx.de>
Subject: Please pull u-boot-marvell/master
Date: Thu, 21 Apr 2022 16:18:55 +0200 [thread overview]
Message-ID: <6077f34e-124c-2b0d-e653-892876f53042@denx.de> (raw)
Hi Tom,
please pull the first batch of Marvell related patches:
----------------------------------------------------------------
- mrvl_uart.sh: Remove script (Pali)
- Fix Espressobin build for configs where ENV is not in SPI (Rogier)
- mvebu: a37xx: Add support for reading OTP (Pali)
- mvebu: uDPU: Ethernet fixes and misc DT and defconfig changes (Robert)
- mvebu: Add support for reading LD0 and LD1 eFuse (Pali)
- kwboot: Replace fstat()+st_size by lseek()+SEEK_END (Pali)
- mvebu: turris_omnia: Enable CONFIG_CMD_FUSE (Pali)
- arm: Add CONFIG_SPL_SYS_NO_VECTOR_TABLE used on 32bit MVEBU (Pali)
- mvebu: a37xx: Add support for writing Security OTP values (Pali)
- mvebu: turris: Misc enhancements and cleanups / fixes (Pali)
- Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet (Tony)
----------------------------------------------------------------
Here the Azure build, without any issues:
https://dev.azure.com/sr0718/u-boot/_build/results?buildId=176&view=results
Thanks,
Stefan
The following changes since commit 22bfaa1f673ab5442dfb9778eea4c9a18dee42d0:
configs: Resync with savedefconfig (2022-04-20 14:48:59 -0400)
are available in the Git repository at:
git@source.denx.de:u-boot/custodians/u-boot-marvell.git
for you to fetch changes up to ac47bd230cd3430589c63f81e57b3d30e0abe0db:
arm: kirkwood: Sheevaplug : Use Marvell uclass mvgbe and PHY driver
for Ethernet (2022-04-21 13:14:52 +0200)
----------------------------------------------------------------
Pali Rohár (17):
tools/mrvl_uart.sh: Remove script
arm: mvebu: a37xx: Add support for reading NB and SB fuse OTP value
arm: mvebu: a37xx: Enable fuse command on all Armada 3720 boards
arm: mvebu: a37xx: Move generic mbox code to arch/arm/mach-mvebu
arm: mvebu: a37xx: Extend mbox_do_cmd() code
arm: mvebu: a37xx: Add support for reading Security OTP values
arm: mvebu: Add support for reading LD0 and LD1 eFuse
tools: kwboot: Replace fstat()+st_size by lseek()+SEEK_END
arm: Introduce new CONFIG_SPL_SYS_NO_VECTOR_TABLE option
arm: Do not compile vector table when SYS_NO_VECTOR_TABLE is enabled
arm: mvebu: Enable CONFIG_SPL_SYS_NO_VECTOR_TABLE for 32-bit mvebu
arm: mvebu: a37xx: Add support for writing Security OTP values
board: turris: Move Turris Atsha OTP code to separate file
board: turris: Do not cache Atsha device in BSS
board: turris: Allow to specify first eth idx of first MAC address
board: turris: Rename atsha204a@64 DT node to crypto@64
arm: mvebu: turris_omnia: Enable CONFIG_CMD_FUSE
Robert Marko (4):
arm: mvebu: dts: uDPU: update DTS
net: mvneta: add SFP TX disable handling
arm: mvebu: dts: uDPU: fix non-working networking
mvebu: uDPU: update defconfig
Rogier Stam (1):
arm: mvebu: Fix Espressobin build for configs where ENV is not in SPI
Tony Dinh (1):
arm: kirkwood: Sheevaplug : Use Marvell uclass mvgbe and PHY
driver for Ethernet
arch/arm/Kconfig | 4 +
arch/arm/cpu/armv7/start.S | 4 +-
arch/arm/dts/armada-3720-uDPU-u-boot.dtsi | 24 +++
arch/arm/dts/armada-3720-uDPU.dts | 21 ++-
arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi | 4 +-
arch/arm/lib/vectors.S | 6 +
arch/arm/mach-mvebu/Kconfig | 2 +
arch/arm/mach-mvebu/Makefile | 3 +
arch/arm/mach-mvebu/armada3700/Makefile | 3 +-
arch/arm/mach-mvebu/armada3700/efuse.c | 217
+++++++++++++++++++++++
arch/arm/mach-mvebu/armada3700/mbox.c | 83 +++++++++
arch/arm/mach-mvebu/efuse.c | 28 +++
arch/arm/mach-mvebu/include/mach/efuse.h | 5 +
arch/arm/mach-mvebu/include/mach/mbox.h | 40 +++++
arch/arm/mach-omap2/Kconfig | 1 +
board/CZ.NIC/turris_atsha_otp.c | 119 +++++++++++++
board/CZ.NIC/turris_atsha_otp.h | 9 +
board/CZ.NIC/turris_mox/mox_sp.c | 73 +-------
board/CZ.NIC/turris_omnia/Makefile | 2 +-
board/CZ.NIC/turris_omnia/turris_omnia.c | 108 +----------
board/Marvell/mvebu_armada-37xx/board.c | 4 +-
board/Marvell/sheevaplug/sheevaplug.c | 83 ++-------
board/Marvell/sheevaplug/sheevaplug.h | 24 ---
configs/mvebu_db-88f3720_defconfig | 2 +
configs/mvebu_espressobin-88f3720_defconfig | 2 +
configs/sheevaplug_defconfig | 4 +-
configs/turris_mox_defconfig | 2 +
configs/turris_omnia_defconfig | 2 +
configs/uDPU_defconfig | 12 +-
drivers/net/mvneta.c | 12 ++
include/configs/sheevaplug.h | 19 +-
tools/kwboot.c | 19 +-
tools/mrvl_uart.sh | 119 -------------
33 files changed, 628 insertions(+), 432 deletions(-)
create mode 100644 arch/arm/mach-mvebu/armada3700/efuse.c
create mode 100644 arch/arm/mach-mvebu/armada3700/mbox.c
create mode 100644 arch/arm/mach-mvebu/include/mach/mbox.h
create mode 100644 board/CZ.NIC/turris_atsha_otp.c
create mode 100644 board/CZ.NIC/turris_atsha_otp.h
delete mode 100644 board/Marvell/sheevaplug/sheevaplug.h
delete mode 100755 tools/mrvl_uart.sh
next reply other threads:[~2022-04-21 14:19 UTC|newest]
Thread overview: 190+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-21 14:18 Stefan Roese [this message]
2022-04-21 18:24 ` Please pull u-boot-marvell/master Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2024-04-04 12:08 Stefan Roese
2024-04-06 0:42 ` Tom Rini
2024-03-05 10:35 Stefan Roese
2024-03-05 13:27 ` Tom Rini
2024-01-22 15:46 Stefan Roese
2024-01-22 16:00 ` Tom Rini
2024-01-10 14:47 Stefan Roese
2024-01-10 15:46 ` Tom Rini
2023-10-27 6:51 Stefan Roese
2023-10-28 0:50 ` Tom Rini
2023-10-20 12:51 Stefan Roese
2023-10-20 14:45 ` Tom Rini
2023-10-20 16:44 ` Stefan Roese
2023-10-20 16:54 ` Tom Rini
2023-10-20 16:55 ` Tom Rini
2023-10-16 14:50 Stefan Roese
2023-10-16 21:32 ` Tom Rini
2023-08-01 9:17 Stefan Roese
2023-08-01 15:57 ` Tom Rini
2023-07-13 14:03 Stefan Roese
2023-07-14 16:04 ` Tom Rini
2023-05-08 8:47 Stefan Roese
2023-05-08 17:39 ` Tom Rini
2023-05-03 9:18 Stefan Roese
2023-05-03 17:14 ` Tom Rini
2023-04-14 6:09 Stefan Roese
2023-04-15 5:07 ` Tom Rini
2023-03-06 11:52 Stefan Roese
2023-03-06 20:12 ` Tom Rini
2023-02-13 14:01 Stefan Roese
2023-02-13 16:28 ` Tom Rini
2023-01-26 9:26 Stefan Roese
2023-01-26 17:08 ` Tom Rini
2023-01-17 11:49 Stefan Roese
2023-01-17 13:20 ` Tom Rini
2023-01-02 10:49 Stefan Roese
2023-01-02 14:36 ` Tom Rini
2022-12-12 8:57 Stefan Roese
2022-12-12 15:43 ` Tom Rini
2022-11-07 8:24 Stefan Roese
2022-11-07 15:13 ` Tom Rini
2022-10-06 10:47 Stefan Roese
2022-10-06 14:25 ` Tom Rini
2022-09-26 11:59 Stefan Roese
2022-09-26 14:00 ` Tom Rini
2022-09-18 12:00 Stefan Roese
2022-09-18 12:34 ` Tom Rini
2022-09-13 10:26 Stefan Roese
2022-09-13 13:49 ` Tom Rini
2022-08-23 15:09 Stefan Roese
2022-08-24 13:52 ` Tom Rini
2022-08-09 11:43 Stefan Roese
2022-08-09 16:33 ` Tom Rini
2022-07-29 12:05 Stefan Roese
2022-07-29 14:31 ` Tom Rini
2022-07-21 12:28 Stefan Roese
2022-07-21 17:40 ` Tom Rini
2022-05-17 7:57 Stefan Roese
2022-05-18 23:52 ` Tom Rini
2022-05-04 9:26 Stefan Roese
2022-05-04 15:41 ` Tom Rini
2022-05-02 15:53 Stefan Roese
2022-05-03 15:06 ` Tom Rini
2022-03-24 16:42 Stefan Roese
2022-03-24 21:23 ` Tom Rini
2022-03-16 9:52 Stefan Roese
2022-03-16 14:48 ` Tom Rini
2022-03-14 15:23 Stefan Roese
2022-03-14 16:19 ` Tom Rini
2022-03-04 12:27 Stefan Roese
2022-03-04 18:12 ` Tom Rini
2022-02-17 15:46 Stefan Roese
2022-02-17 18:56 ` Tom Rini
2022-02-10 8:21 Stefan Roese
2022-02-10 14:01 ` Tom Rini
2022-01-31 11:37 Stefan Roese
2022-01-31 15:21 ` Tom Rini
2022-01-20 16:31 Stefan Roese
2022-01-20 18:48 ` Tom Rini
2022-01-14 15:42 Stefan Roese
2022-01-14 17:26 ` Tom Rini
2022-01-05 17:27 Stefan Roese
2022-01-05 19:24 ` Tom Rini
2021-12-15 10:58 Stefan Roese
2021-12-15 13:39 ` Tom Rini
2021-11-30 13:42 Stefan Roese
2021-11-30 16:54 ` Tom Rini
2021-11-10 13:52 Stefan Roese
2021-11-10 19:11 ` Tom Rini
2021-11-03 7:49 Stefan Roese
2021-11-03 14:44 ` Tom Rini
2021-10-28 10:50 Stefan Roese
2021-10-28 14:47 ` Tom Rini
2021-10-21 7:53 Stefan Roese
2021-10-21 14:16 ` Tom Rini
2021-10-08 9:23 Stefan Roese
2021-10-08 13:56 ` Tom Rini
2021-09-29 7:47 Stefan Roese
2021-09-29 22:28 ` Tom Rini
2021-09-27 10:58 Stefan Roese
2021-09-27 12:52 ` Tom Rini
2021-09-10 12:05 Stefan Roese
2021-09-10 17:57 ` Tom Rini
2021-09-01 9:24 Stefan Roese
2021-09-01 14:12 ` Tom Rini
2021-08-11 8:30 Stefan Roese
2021-08-11 15:50 ` Tom Rini
2021-07-31 10:04 Stefan Roese
2021-08-01 3:28 ` Tom Rini
2021-08-01 5:26 ` Stefan Roese
2021-08-01 10:46 ` Pali Rohár
2021-08-01 14:33 ` Tom Rini
2021-08-01 14:46 ` Pali Rohár
2021-07-19 12:37 Stefan Roese
2021-07-19 20:44 ` Tom Rini
2021-07-15 10:36 Stefan Roese
2021-07-15 18:48 ` Tom Rini
2021-07-09 5:19 Stefan Roese
2021-07-10 1:08 ` Tom Rini
2021-06-15 8:11 Stefan Roese
2021-06-16 3:16 ` Tom Rini
2021-06-10 7:55 Stefan Roese
2021-06-10 17:27 ` Tom Rini
2021-06-04 13:15 Stefan Roese
2021-06-05 3:09 ` Tom Rini
2021-05-20 13:39 Stefan Roese
2021-05-21 14:07 ` Tom Rini
2021-05-13 10:21 Stefan Roese
2021-05-13 15:37 ` Tom Rini
2021-05-15 8:03 ` Stefan Roese
2021-05-15 12:07 ` Tom Rini
2021-04-29 6:47 Stefan Roese
2021-04-29 15:30 ` Tom Rini
2021-04-08 8:57 Stefan Roese
2021-04-08 19:35 ` Tom Rini
2021-03-12 9:02 Stefan Roese
2021-03-12 15:17 ` Tom Rini
2021-02-26 11:14 Stefan Roese
2021-02-26 17:40 ` Tom Rini
2021-02-08 11:41 Stefan Roese
2021-02-08 20:42 ` Tom Rini
2021-01-27 16:02 Stefan Roese
2021-01-27 19:22 ` Tom Rini
2020-12-28 10:40 Stefan Roese
2020-12-28 15:31 ` Tom Rini
2020-12-07 11:18 Stefan Roese
2020-12-07 22:09 ` Tom Rini
2020-10-29 14:31 Stefan Roese
2020-10-30 18:46 ` Tom Rini
2020-10-16 13:40 Stefan Roese
2020-10-16 22:02 ` Tom Rini
2020-10-14 8:19 Stefan Roese
2020-10-15 0:03 ` Tom Rini
2020-10-01 12:41 Stefan Roese
2020-10-01 22:10 ` Tom Rini
2020-09-24 10:40 Stefan Roese
2020-09-25 16:54 ` Tom Rini
2020-09-04 14:04 Stefan Roese
2020-09-04 16:49 ` Tom Rini
2020-08-31 13:12 Stefan Roese
2020-08-31 16:50 ` Tom Rini
2020-08-25 13:20 Stefan Roese
2020-08-26 1:22 ` Tom Rini
2020-08-13 12:24 Stefan Roese
2020-08-13 14:51 ` Tom Rini
2020-08-06 14:33 Stefan Roese
2020-08-06 18:28 ` Tom Rini
2020-08-08 14:42 ` Tom Rini
2020-07-09 8:42 Stefan Roese
2020-07-09 13:54 ` Tom Rini
2020-05-27 7:09 Stefan Roese
2020-05-27 15:59 ` Tom Rini
2020-05-04 6:54 Stefan Roese
2020-05-04 17:54 ` Tom Rini
2020-04-22 14:48 Stefan Roese
2020-04-22 18:34 ` Tom Rini
2020-04-23 5:04 ` Stefan Roese
2020-04-23 14:17 ` Joel Johnson
2020-04-14 11:28 Stefan Roese
2020-04-14 23:25 ` Tom Rini
2020-01-21 13:03 Stefan Roese
2020-01-21 13:11 ` Tom Rini
2020-01-21 13:19 ` Stefan Roese
2020-01-21 13:31 ` Baruch Siach
2020-01-21 13:32 ` Tom Rini
2020-01-21 13:33 ` Stefan Roese
2020-01-16 14:34 Stefan Roese
2020-01-16 21:02 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6077f34e-124c-2b0d-e653-892876f53042@denx.de \
--to=sr@denx.de \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).