From: Tony Dinh <mibodhi@gmail.com>
To: Stefan Roese <sr@denx.de>
Cc: "U-Boot Mailing List" <u-boot@lists.denx.de>,
"Pali Rohár" <pali@kernel.org>,
"Michael Walle" <michael@walle.cc>
Subject: Re: [PATCH 0/6] Enable CONFIG_TIMER for all Kirwood / MVEBU boards
Date: Tue, 30 Aug 2022 23:45:36 -0700 [thread overview]
Message-ID: <CAJaLiFynB6iiV2Adzh+dCnnwTMO6XJdDcqXWt6mnKcfoX2S=hw@mail.gmail.com> (raw)
In-Reply-To: <69b0f490-4aae-c276-6447-7390397a0268@denx.de>
Hi Stefan,
On Tue, Aug 30, 2022 at 11:19 PM Stefan Roese <sr@denx.de> wrote:
>
> Hi Tony,
>
> On 31.08.22 07:08, Stefan Roese wrote:
> > Hi Tony,
> >
> > On 31.08.22 07:02, Stefan Roese wrote:
> >> Hi Tony,
> >>
> >> On 31.08.22 00:15, Tony Dinh wrote:
> >>> Hi Stefan,
> >>>
> >>> On Tue, Aug 30, 2022 at 4:53 AM Stefan Roese <sr@denx.de> wrote:
> >>>>
> >>>> This patchset enhaces the recently added Orion Timer driver to support
> >>>> all other Kirkwood & 32bit MVEBU Armada platforms. Additionally, this
> >>>> timer support is then enabled per default for those platforms, so that
> >>>> the board config files don't need to be changed. Also necessary is
> >>>> some dts hacking, so that the timer DT node is available in early
> >>>> U-Boot stages.
> >>>>
> >>>> I've successfully tested this patchset on an Armada XP board.
> >>>> Additional
> >>>> test on other boards and platforms are very welcome and necessary.
> >>>
> >>> I've run some tests with the following 2 Kirkwood boards: Cloud
> >>> Engines Pogo V4 88F6192 (with CONFIG_DM_RTC and CONFIG_RTC_EMULATION),
> >>> and Marvell Sheevaplug 88F6281 (with CONFIG_DM_RTC and CONFIG_RTC_MV).
> >>>
> >>> It seems that it was either frozen or the timer did not expire at some
> >>> subsequent sleep commands. Sometime it happened at 2nd command, some
> >>> time at a later sleep command. For example,
> >>>
> >>> === Pogo V4 (the 1st sleep command works correctly at 10 seconds on my
> >>> stopwatch)
> >>>
> >>> U-Boot 2022.10-rc3-00048-g66ccd87a9c-dirty (Aug 30 2022 - 13:38:24
> >>> -0700)
> >>> Pogoplug V4
> >>>
> >>> Hit any key to stop autoboot: 0
> >>> Pogo_V4> sleep 10
> >>> Pogo_V4> sleep 31.5
> >>> <frozen here>
> >>
> >> Does the cmd interface support fractial numbers? Please test again with
> >> 31 or other integral numbers.
> >>
> >>> === Sheevaplug (RTC battery is old, so the date was not updated, but
> >>> the clock seems OK)
> >>>
> >>> U-Boot 2022.10-rc3-00048-g66ccd87a9c-dirty (Aug 30 2022 - 14:14:24
> >>> -0700)
> >>> Marvell-Sheevaplug
> >>> Hit any key to stop autoboot: 0
> >>> => date
> >>> Date: 2000-01-01 (Saturday) Time: 0:02:55
> >>> => sleep 10
> >>> => date
> >>> Date: 2000-01-01 (Saturday) Time: 0:03:18
> >>> => sleep 10
> >>> => sleep 20.1
> >>> <frozen here>
> >>>
> >>> Please let me know what I can do (i.e. perhaps running a debug patch).
> >>
> >> Please see above. I assume that the fractional numbers result in very
> >> long numbers internally, which result in a frozen / hanging system.
> >
> > I just tested fractional numbers on another board and hey, it just
> > works. Learned something new. So we seem to have a problem here. Let
> > me see, if I can find something.
>
> I can't reproduce this problem on my Armada XP platform. When your
> system is frozen, can you interrupt the sleep cmd via Ctrl-C? Can you
> please also test without this patchset applied, if a series of sleep
> commands works fine there?
Indeed, it works without the patchset. I ran an older version (U-Boot
2021.10) and entered some random sleep periods such as
Pogo_V4> sleep 5
Pogo_V4> sleep 20.5
Pogo_V4> sleep 35
Pogo_V4> sleep 15.3
Pogo_V4> sleep 33.33
Pogo_V4> sleep 77.23
And it is also true that I could not do Ctrl-C when it is frozen
running with the new timer.
Thanks,
Tony
> Thanks,
> Stefan
next prev parent reply other threads:[~2022-08-31 6:45 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-30 11:53 [PATCH 0/6] Enable CONFIG_TIMER for all Kirwood / MVEBU boards Stefan Roese
2022-08-30 11:53 ` [PATCH 1/6] timer: orion-timer: Add support for other Armada SoC's Stefan Roese
2022-08-30 11:53 ` [PATCH 2/6] timer: orion-timer: Add timer_get_boot_us() for BOOTSTAGE support Stefan Roese
2022-08-30 12:00 ` Michael Walle
2022-08-30 12:08 ` Stefan Roese
2022-08-30 15:56 ` Simon Glass
2022-08-31 5:57 ` Stefan Roese
2022-08-31 17:44 ` Simon Glass
2022-09-01 5:33 ` Stefan Roese
2022-08-30 11:53 ` [PATCH 3/6] arm: mvebu: Use CONFIG_TIMER on all MVEBU & KIRKWOOD platforms Stefan Roese
2022-08-30 12:04 ` Michael Walle
2022-08-30 12:11 ` Stefan Roese
2022-08-30 11:53 ` [PATCH 4/6] arm: mvebu: dts: Makefile: Compile Armada 375 dtb in a separate step Stefan Roese
2022-08-30 11:53 ` [PATCH 5/6] arm: mvebu: dts: armada-375.dtsi: Add timer0 & timer1 Stefan Roese
2022-08-30 11:53 ` [PATCH 6/6] arm: mvebu: dts: mvebu-u-boot.dtsi: Add "u-boot, dm-pre-reloc" to timer DT node Stefan Roese
2022-08-30 22:15 ` [PATCH 0/6] Enable CONFIG_TIMER for all Kirwood / MVEBU boards Tony Dinh
2022-08-31 5:02 ` Stefan Roese
2022-08-31 5:08 ` Stefan Roese
2022-08-31 6:12 ` Stefan Roese
2022-08-31 6:45 ` Tony Dinh [this message]
2022-08-31 6:30 ` Tony Dinh
2022-08-31 7:22 ` Stefan Roese
2022-08-31 15:08 ` Tony Dinh
2022-08-31 21:53 ` Tony Dinh
2022-09-01 1:38 ` Tony Dinh
2022-09-01 2:27 ` Simon Glass
2022-09-01 7:39 ` Tony Dinh
2022-09-01 9:27 ` Stefan Roese
2022-09-01 11:52 ` Stefan Herbrechtsmeier
2022-09-02 5:38 ` Stefan Roese
2022-09-01 14:34 ` Simon Glass
2022-09-01 23:46 ` Tony Dinh
2022-09-02 2:51 ` Tony Dinh
2022-09-02 3:49 ` Tony Dinh
2022-09-16 4:34 Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAJaLiFynB6iiV2Adzh+dCnnwTMO6XJdDcqXWt6mnKcfoX2S=hw@mail.gmail.com' \
--to=mibodhi@gmail.com \
--cc=michael@walle.cc \
--cc=pali@kernel.org \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).