From: Lee Jones <lee.jones@linaro.org>
To: u-boot@lists.denx.de, linux-rockchip@lists.infradead.org
Cc: wxt@rock-chips.com, kever.yang@rock-chips.com,
zhangqing@rock-chips.com, derrick.huang@rock-chips.com,
chenjh@rock-chips.com, hisping.lin@rock-chips.com,
typ@rock-chips.com, cwz@rock-chips.com, chenfen@rock-chips.com,
jagan@amarulasolutions.com, sjg@chromium.org, cym@rock-chips.com,
pgwipeout@gmail.com, adelva@google.com, rammuthiah@google.com
Subject: Re: [Rock Pi 4+] Mainline LPDDR4 RAM initialisation is not sufficient to boot successfully
Date: Thu, 16 Jun 2022 20:15:29 +0100 [thread overview]
Message-ID: <YquBUfkaScI2txiA@google.com> (raw)
In-Reply-To: <Yo4v3jUeHXTovjOH@google.com>
On Wed, 25 May 2022, Lee Jones wrote:
> Good afternoon,
>
> There appear to be a number of issues with the Rockchip rk3399 DDR RAM
> initialisation sequence in Mainline. Specifically, I'm seeing
> consistent failures on the Rock Pi 4+ during early boot.
Can anyone from Rockchip help with this please?
What does the binary blob [0] do differently to the U-boot
implementation.
Are you able to publish the source for the DDR binary blob?
Please help me fix U-boot.
[0] https://github.com/rockchip-linux/rkbin/blob/master/bin/rk33/rk3399_ddr_933MHz_v1.25.bin
> A typical failure looks something like this:
>
> U-Boot TPL 2022.07-rc3-00005-g1b04a961c6 (May 25 2022 - 11:09:19)
> Channel 0: LPDDR4, 50MHz
> BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
> Channel 1: col error
> Cap error!
> 256B stride
> lpddr4_set_rate: change freq to 400000000 mhz 0, 1
> lpddr4_set_rate: change freq to 800000000 mhz 1, 0
> Trying to boot from BOOTROM
> Returning to boot ROM...
>
> Even when the system boots to a terminal, which happens very
> infrequently, the LPDDR4 RAM chip at Channel 1 can have conflicting
> discovery information printed during TPL. The following 3 lines were
> printed during successive reboots using the same SD card with no
> changes:
>
> # Boot 1:
> BW=32 Col=9 Bk=4 CS0 Row=16/15 CS=1 Die BW=16 Size=384MB
>
> # Boot 2:
> BW=32 Col=10 Bk=4 CS0 Row=16/15 CS=1 Die BW=16 Size=768MB
>
> # Boot 3:
> BW=32 Col=10 Bk=4 CS0 Row=15 CS=1 Die BW=16 Size=512MB
>
> The story changes when I build the idbloader.img image with Rockchip's
> TBL (?) binary blob [0]. With that built in, presumably in place of
> the upstream TBL, both RAM chips are successfully enumerated and boot
> succeeds with 100% success rate:
>
> tools/mkimage -n rk3399 -T rksd -d \
> rk3399_ddr_933MHz_v1.25.bin:spl/u-boot-spl.bin idbloader.img
>
> Another thing that is very different between the 2 is the initial
> frequency the LPDDR4 chips are clocked at. Using the upstream TBL
> version, the default is 50Mhz, which seems very low. If using the
> Rockchip supplied binary blob file, this is increased to a respectable
> 416MHz:
>
> # Mainline
> Channel 0: LPDDR4, 50MHz
>
> # Rockchip TBL blob
> Channel 0: LPDDR4,416MHz
>
> One thing I did try was to load in the 400Mhz configuration settings
> from drivers/ram/rockchip/sdram-rk3399-lpddr4-400.inc as the default
> initial values, instead of the 50MHz default taken from
> arch/arm/dts/rk3399-sdram-lpddr4-100.dtsi, but this failed in a number
> of ways:
>
> Setting clock: Freq: 400MHz (400000000)
> Calling SDRAM init: 2 Channels
> Starting SDRAM initialization...
> mr5:0 mr12:0 mr14:0
> Training failed for rank 2, ch 0 (ret: -22)
> mr5:0 mr12:0 mr14:0
> Training failed for rank 1, ch 0 (ret: -22)
> mr5:0 mr12:0 mr14:0
> Training failed for rank 2, ch 1 (ret: -22)
> mr5:0 mr12:0 mr14:0
> Training failed for rank 1, ch 1 (ret: -22)
> Rank for Channel 1 is 0x0
> Rank for Channel 0 is 0x0
> Rank for Channel 1 is 0x0
> sdram_init: LPDDR4 - 400MHz failed!
> rk3399_dmc_init DRAM init failed -22
>
> So my question is; does Rockchip, or anyone else for that matter, have
> any plans on updating Mainline U-Boot with the upgraded/working LPDDR4
> initialisation sequence?
>
> As ever, any information / help would be gratefully received.
>
> NB: If I have missed any critical people out from this discussion,
> please feel free to loop as many of them in as you see fit.
>
> Kind regards,
> Lee
>
> [0] https://github.com/rockchip-linux/rkbin/blob/master/bin/rk33/rk3399_ddr_933MHz_v1.25.bin
>
--
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2022-06-16 19:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-25 13:32 [Rock Pi 4+] Mainline LPDDR4 RAM initialisation is not sufficient to boot successfully Lee Jones
2022-06-16 19:15 ` Lee Jones [this message]
2022-06-17 12:06 ` cym
2022-06-17 16:50 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YquBUfkaScI2txiA@google.com \
--to=lee.jones@linaro.org \
--cc=adelva@google.com \
--cc=chenfen@rock-chips.com \
--cc=chenjh@rock-chips.com \
--cc=cwz@rock-chips.com \
--cc=cym@rock-chips.com \
--cc=derrick.huang@rock-chips.com \
--cc=hisping.lin@rock-chips.com \
--cc=jagan@amarulasolutions.com \
--cc=kever.yang@rock-chips.com \
--cc=linux-rockchip@lists.infradead.org \
--cc=pgwipeout@gmail.com \
--cc=rammuthiah@google.com \
--cc=sjg@chromium.org \
--cc=typ@rock-chips.com \
--cc=u-boot@lists.denx.de \
--cc=wxt@rock-chips.com \
--cc=zhangqing@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).