[virtio-dev] Re: [virtio] [PATCH v10 04/10] admin: introduce virtio admin virtqueues

[David Edmondson <david.edmondson@oracle.com>]

"Michael S. Tsirkin" <mst@redhat.com> writes:

> The admin virtqueues will be the first interface to issue admin commands.

"first interface used" ?

> Currently virtio specification defines control virtqueue to manipulate

"Currently the virtio specification defines the control virtqueue"

> features and configuration of the device it operates on. However,
> control virtqueue commands are device type specific, which makes it very
> difficult to extend for device agnostic commands.
>
> To support this requirement in a more generic way, this patch introduces
> a new admin virtqueue interface.
>
> We also support more than one admin virtqueue, for QoS and
> scalability requirements.
>
> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
> ---
>  admin.tex   | 74 +++++++++++++++++++++++++++++++++++++++++++++++++++++
>  content.tex |  7 +++--
>  2 files changed, 79 insertions(+), 2 deletions(-)
>
> diff --git a/admin.tex b/admin.tex
> index 7e28b77..3ffac2e 100644
> --- a/admin.tex
> +++ b/admin.tex
> @@ -155,3 +155,77 @@ \subsection{Group administration commands}\label{sec:Basic Facilities of a Virti
>  \field{command_specific_data} and \field{command_specific_result}
>  depends on these structures and is described separately or is
>  implicit in the structure description.
> +
> +\section{Administration Virtqueues}\label{sec:Basic Facilities of a Virtio Device / Administration Virtqueues}
> +
> +An administration virtqueue of an owner device is used to submit
> +group administration commands. An owner device can have more
> +than one administration virtqueue.
> +
> +If VIRTIO_F_ADMIN_VQ has been negotiated, an owner device exposes one
> +or more adminstration virtqueues. The number and locations of the
> +administration virtqueues are exposed by the owner device in a transport
> +specific manner.
> +
> +The driver submits commands by queueing them to an arbitrary
> +administration virtqueue, and they are processed by the
> +device in the order in which they are queued. It is the
> +responsibility of the driver to ensure ordering for commands
> +placed on different administration virtqueues, because they will
> +be executed with no order constraints.
> +
> +Administration virtqueues are used as follows:
> +\begin{itemize}
> +\item The driver submits the command using the \field{struct virtio_admin_cmd}
> +structure using a buffer consisting of two parts: a device-readable one followed by a
> +device-writable one.
> +\item the device-readable part includes fields from \field{opcode}
> +through \field{command_specific_data}.
> +\item the device-writeable buffer includes fields from \field{status}
> +through \field{command_specific_result} inclusive.
> +\end{itemize}
> +
> +For each command, this specification describes a distinct
> +format structure used for \field{command_specific_data} and
> +\field{command_specific_result}, the length of these fields
> +depends on the command.
> +
> +However, to ensure forward compatibility
> +\begin{itemize}
> +\item drivers are allowed to submit buffers that are longer
> +than what the device expects

s/what//

> +(that is, longer than the length of
> +\field{opcode} through \field{command_specific_data}).
> +This allows the driver to maintain
> +a single format structure even if some structure fields are
> +unused by the device.
> +\item drivers are allowed to submit buffers that are shorter
> +than what the device expects
> +(that is, shorter than the length of \field{status} through
> +\field{command_specific_result}). This allows the device to maintain
> +a single format structure even if some structure fields are
> +unused by the driver.
> +\end{itemize}

Given that the previous patch declared this as a single data structure
(containing both command and result), with no length indicators for the
command specific data or result, how will a device know how much space
the driver has allocated for the command_specific_data or
command_specific result?

> +The device compares the length of each part (device-readable and
> +device-writeable) of the buffer as submitted by driver to what it
> +expects and then silently truncates the structures to either the
> +length submitted by the driver, or the length described in this
> +specification, whichever is shorter.  The device silently ignores
> +any data falling outside the shorter of the two lengths. Any
> +missing fields are interpreted as set to zero.
> +
> +Similarly, the driver compares the used buffer length
> +of the buffer to what it expects and then silently
> +truncates the structure to the used buffer length.
> +The driver silently ignores any data falling outside
> +the used buffer length reported by the device.  Any missing
> +fields are interpreted as set to zero.
> +
> +This simplifies driver and device implementations since the
> +driver/device can simply maintain a single large structure (such
> +as a C structure) for a command and its result. As new versions
> +of the specification are designed, new fields can be added to the
> +tail of a structure, with the driver/device using the full
> +structure without concern for versioning.
> +>>>>>>> 0edc690... admin: introduce virtio admin virtqueues

Merge detritus.

> diff --git a/content.tex b/content.tex
> index ffe45c4..c8647c9 100644
> --- a/content.tex
> +++ b/content.tex
> @@ -99,10 +99,10 @@ \section{Feature Bits}\label{sec:Basic Facilities of a Virtio Device / Feature B
>  \begin{description}
>  \item[0 to 23, and 50 to 127] Feature bits for the specific device type
>  
> -\item[24 to 40] Feature bits reserved for extensions to the queue and
> +\item[24 to 41] Feature bits reserved for extensions to the queue and
>    feature negotiation mechanisms
>  
> -\item[41 to 49, and 128 and above] Feature bits reserved for future extensions.
> +\item[42 to 49, and 128 and above] Feature bits reserved for future extensions.
>  \end{description}
>  
>  \begin{note}
> @@ -7682,6 +7682,9 @@ \chapter{Reserved Feature Bits}\label{sec:Reserved Feature Bits}
>    that the driver can reset a queue individually.
>    See \ref{sec:Basic Facilities of a Virtio Device / Virtqueues / Virtqueue Reset}.
>  
> +  \item[VIRTIO_F_ADMIN_VQ(41)] This feature indicates that the device exposes one or more
> +  administration virtqueues.
> +
>  \end{description}
>  
>  \drivernormative{\section}{Reserved Feature Bits}{Reserved Feature Bits}
> -- 
> MST
>
>
> ---------------------------------------------------------------------
> To unsubscribe from this mail list, you must leave the OASIS TC that 
> generates this mail.  Follow this link to all your TCs in OASIS at:
> https://www.oasis-open.org/apps/org/workgroup/portal/my_workgroups.php 
-- 
And removed his hat, in respect of her presence.

---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org