WireGuard Archive on lore.kernel.org
 help / Atom feed
* [bug] wireguard-android does not correctly add resolved IPv6 endpoints
@ 2019-01-22 21:45 Alex Xu
  0 siblings, 0 replies; 1+ messages in thread
From: Alex Xu @ 2019-01-22 21:45 UTC (permalink / raw)
  To: wireguard


Using wireguard android 2018.12.18 on an IPv6-only network, it is not
possible to use a DNS name for an endpoint.

steps to reproduce:

1. create a tunnel. set the endpoint to example.com:12345
2. bring up the tunnel

expected results:

the tunnel is brought up (in this case it won't actually work because
example.com is not a wireguard server, but it will be brought up)

actual results:

In the log, there is this error:

WireGuard/GoBackend/wg0: Failed to set endpoint: x:x:x:x::1:40257

additional information:

entering the same IP address with square brackets works fine.
WireGuard mailing list

^ permalink raw reply	[flat|nested] 1+ messages in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-22 21:45 [bug] wireguard-android does not correctly add resolved IPv6 endpoints Alex Xu

WireGuard Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/wireguard/0 wireguard/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 wireguard wireguard/ https://lore.kernel.org/wireguard \
		wireguard@lists.zx2c4.com zx2c4-wireguard@archiver.kernel.org
	public-inbox-index wireguard

Newsgroup available over NNTP:

AGPL code for this site: git clone https://public-inbox.org/ public-inbox