* WireGuardNT BSOD Windows 10 21H1 Mullvad
@ 2021-08-03 10:20 Andre Christanto
2021-08-03 15:00 ` Jason A. Donenfeld
2021-08-04 10:02 ` Peter Whisker
0 siblings, 2 replies; 6+ messages in thread
From: Andre Christanto @ 2021-08-03 10:20 UTC (permalink / raw)
To: wireguard
[-- Attachment #1: Type: text/plain, Size: 1282 bytes --]
Hi all,
Thank you very much for developing WireGuard. I have been using it
daily for all my VPN needs.
This is my first time using mailing list, so please give me feedback
if I'm using this wrong.
Today after I received notification that an update was available, I
immediately update my WireGuard installation and while waiting for the
installation to complete, I enabled the ExperimentalKernelDriver flag.
After the update was completed and WireGuard automatically reconnected
my VPN connection, my Windows almost immediately got BSOD (~2-3s after
VPN connected notification) and keep getting it after restarts (I set
my account to auto-login). Thinking that maybe I shouldn't enable the
flag immediately after an update, I disabled the flag through Safe
Mode. But after a restart and enablement of the flag, I still got BSOD
after WireGuard was connected. In the end, I decided to disable
WireGuardNT for now and report this feedback.
I am using WireGuard on my Windows 10 x64 21H1 installation. My VPN
provider is Mullvad and I am connected through wireless (Wi-Fi 5)
connection using Intel 9260 network card. I also attached WireGuard's
log to this email.
Please let me know if you need more information.
Thank you very much for the support!
Best regards,
Andre Christanto
[-- Attachment #2: wireguard-log-2021-08-03T170801.zip --]
[-- Type: application/x-zip-compressed, Size: 16017 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: WireGuardNT BSOD Windows 10 21H1 Mullvad
2021-08-03 10:20 WireGuardNT BSOD Windows 10 21H1 Mullvad Andre Christanto
@ 2021-08-03 15:00 ` Jason A. Donenfeld
2021-08-03 17:25 ` Jason A. Donenfeld
2021-08-04 10:02 ` Peter Whisker
1 sibling, 1 reply; 6+ messages in thread
From: Jason A. Donenfeld @ 2021-08-03 15:00 UTC (permalink / raw)
To: Andre Christanto, wireguard
Hi Andre,
On 8/3/21 12:20 PM, Andre Christanto wrote:
> Today after I received notification that an update was available, I
> immediately update my WireGuard installation and while waiting for the
> installation to complete, I enabled the ExperimentalKernelDriver flag.
> After the update was completed and WireGuard automatically reconnected
> my VPN connection, my Windows almost immediately got BSOD (~2-3s after
> VPN connected notification)
Thank you for the bug report. I fixed a similar sounding bug yesterday,
but perhaps this is a new one. Do you think you could send me the files
in the C:\windows\minidump directory? It's probably best to mail these
to me personally rather than sending them to the mailing list.
Thanks,
Jason
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: WireGuardNT BSOD Windows 10 21H1 Mullvad
2021-08-03 15:00 ` Jason A. Donenfeld
@ 2021-08-03 17:25 ` Jason A. Donenfeld
0 siblings, 0 replies; 6+ messages in thread
From: Jason A. Donenfeld @ 2021-08-03 17:25 UTC (permalink / raw)
To: Andre Christanto, wireguard
On 8/3/21 5:00 PM, Jason A. Donenfeld wrote:
> On 8/3/21 12:20 PM, Andre Christanto wrote:
>> Today after I received notification that an update was available, I
>> immediately update my WireGuard installation and while waiting for the
>> installation to complete, I enabled the ExperimentalKernelDriver flag.
>> After the update was completed and WireGuard automatically reconnected
>> my VPN connection, my Windows almost immediately got BSOD (~2-3s after
>> VPN connected notification)
>
> Thank you for the bug report. I fixed a similar sounding bug yesterday,
> but perhaps this is a new one. Do you think you could send me the files
> in the C:\windows\minidump directory? It's probably best to mail these
> to me personally rather than sending them to the mailing list.
v0.4.1 is now released. Please see if that fixes the issue.
Jason
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: WireGuardNT BSOD Windows 10 21H1 Mullvad
2021-08-03 10:20 WireGuardNT BSOD Windows 10 21H1 Mullvad Andre Christanto
2021-08-03 15:00 ` Jason A. Donenfeld
@ 2021-08-04 10:02 ` Peter Whisker
2021-08-04 11:17 ` Jason A. Donenfeld
1 sibling, 1 reply; 6+ messages in thread
From: Peter Whisker @ 2021-08-04 10:02 UTC (permalink / raw)
To: wireguard
Hi
Yes, I saw similar BSOD on a workstation I run yesterday but as it is
remote it's a nuisance if I have to go and restart it in safe mode to
disable the kernel flag. I may get to re-try it later in the week.
However my work laptop has been rock solid with the WireguardNT driver
and now works both directly and also through a PulseSecure tunnel,
running a total of three tunnels and six peers simultaneously. :)
Peter
On 03/08/2021 11:20, Andre Christanto wrote:
> Hi all,
>
> Thank you very much for developing WireGuard. I have been using it
> daily for all my VPN needs.
> This is my first time using mailing list, so please give me feedback
> if I'm using this wrong.
>
> Today after I received notification that an update was available, I
> immediately update my WireGuard installation and while waiting for the
> installation to complete, I enabled the ExperimentalKernelDriver flag.
> After the update was completed and WireGuard automatically reconnected
> my VPN connection, my Windows almost immediately got BSOD (~2-3s after
> VPN connected notification) and keep getting it after restarts (I set
> my account to auto-login). Thinking that maybe I shouldn't enable the
> flag immediately after an update, I disabled the flag through Safe
> Mode. But after a restart and enablement of the flag, I still got BSOD
> after WireGuard was connected. In the end, I decided to disable
> WireGuardNT for now and report this feedback.
>
> I am using WireGuard on my Windows 10 x64 21H1 installation. My VPN
> provider is Mullvad and I am connected through wireless (Wi-Fi 5)
> connection using Intel 9260 network card. I also attached WireGuard's
> log to this email.
> Please let me know if you need more information.
>
> Thank you very much for the support!
>
> Best regards,
> Andre Christanto
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: WireGuardNT BSOD Windows 10 21H1 Mullvad
2021-08-04 10:02 ` Peter Whisker
@ 2021-08-04 11:17 ` Jason A. Donenfeld
2021-08-04 15:54 ` Peter Whisker
0 siblings, 1 reply; 6+ messages in thread
From: Jason A. Donenfeld @ 2021-08-04 11:17 UTC (permalink / raw)
To: Peter Whisker; +Cc: WireGuard mailing list
On Wed, Aug 4, 2021 at 12:05 PM Peter Whisker <peter.whisker@gmail.com> wrote:
> Yes, I saw similar BSOD on a workstation I run yesterday but as it is
> remote it's a nuisance if I have to go and restart it in safe mode to
> disable the kernel flag. I may get to re-try it later in the week.
Can you confirm that the BSOD was on 0.4 and not on 0.4.1? It's
important for me to know whether this is a new bug or just a
non-contributing "me too" for the old one. If this is a crash on
0.4.1, can you send me C:\windows\memory.dmp or
C:\windows\minidump\*.dmp ?
Thanks,
Jason
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: WireGuardNT BSOD Windows 10 21H1 Mullvad
2021-08-04 11:17 ` Jason A. Donenfeld
@ 2021-08-04 15:54 ` Peter Whisker
0 siblings, 0 replies; 6+ messages in thread
From: Peter Whisker @ 2021-08-04 15:54 UTC (permalink / raw)
To: Jason A. Donenfeld; +Cc: WireGuard mailing list
The original 0.4
On 04/08/2021 12:17, Jason A. Donenfeld wrote:
> On Wed, Aug 4, 2021 at 12:05 PM Peter Whisker <peter.whisker@gmail.com> wrote:
>> Yes, I saw similar BSOD on a workstation I run yesterday but as it is
>> remote it's a nuisance if I have to go and restart it in safe mode to
>> disable the kernel flag. I may get to re-try it later in the week.
> Can you confirm that the BSOD was on 0.4 and not on 0.4.1? It's
> important for me to know whether this is a new bug or just a
> non-contributing "me too" for the old one. If this is a crash on
> 0.4.1, can you send me C:\windows\memory.dmp or
> C:\windows\minidump\*.dmp ?
>
> Thanks,
> Jason
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-08-04 15:54 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-03 10:20 WireGuardNT BSOD Windows 10 21H1 Mullvad Andre Christanto
2021-08-03 15:00 ` Jason A. Donenfeld
2021-08-03 17:25 ` Jason A. Donenfeld
2021-08-04 10:02 ` Peter Whisker
2021-08-04 11:17 ` Jason A. Donenfeld
2021-08-04 15:54 ` Peter Whisker
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).