From: Andrew Cooper <andrew.cooper3@citrix.com>
To: Xen-devel <xen-devel@lists.xen.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Subject: [PATCH v3 12/28] xen/x86: Improve disabling of features which have dependencies
Date: Tue, 15 Mar 2016 15:35:08 +0000 [thread overview]
Message-ID: <1458056124-8024-13-git-send-email-andrew.cooper3@citrix.com> (raw)
In-Reply-To: <1458056124-8024-1-git-send-email-andrew.cooper3@citrix.com>
APIC and XSAVE have dependent features, which also need disabling if Xen
chooses to disable a feature.
Use setup_clear_cpu_cap() rather than clear_bit(), as it takes care of
dependent features as well.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <JBeulich@suse.com>
---
v2: Move boolean_param() adjacent to use_xsave in xstate_init()
---
xen/arch/x86/apic.c | 2 +-
xen/arch/x86/cpu/common.c | 12 +++---------
xen/arch/x86/xstate.c | 6 +++++-
3 files changed, 9 insertions(+), 11 deletions(-)
diff --git a/xen/arch/x86/apic.c b/xen/arch/x86/apic.c
index b9601ad..8df5bd3 100644
--- a/xen/arch/x86/apic.c
+++ b/xen/arch/x86/apic.c
@@ -1349,7 +1349,7 @@ void pmu_apic_interrupt(struct cpu_user_regs *regs)
int __init APIC_init_uniprocessor (void)
{
if (enable_local_apic < 0)
- __clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
+ setup_clear_cpu_cap(X86_FEATURE_APIC);
if (!smp_found_config && !cpu_has_apic) {
skip_ioapic_setup = 1;
diff --git a/xen/arch/x86/cpu/common.c b/xen/arch/x86/cpu/common.c
index cb1cab3..a325dc0 100644
--- a/xen/arch/x86/cpu/common.c
+++ b/xen/arch/x86/cpu/common.c
@@ -16,9 +16,6 @@
#include "cpu.h"
-static bool_t use_xsave = 1;
-boolean_param("xsave", use_xsave);
-
bool_t opt_arat = 1;
boolean_param("arat", opt_arat);
@@ -341,12 +338,6 @@ void identify_cpu(struct cpuinfo_x86 *c)
if (this_cpu->c_init)
this_cpu->c_init(c);
- /* Initialize xsave/xrstor features */
- if ( !use_xsave )
- __clear_bit(X86_FEATURE_XSAVE, boot_cpu_data.x86_capability);
-
- if ( cpu_has_xsave )
- xstate_init(c);
if ( !opt_pku )
setup_clear_cpu_cap(X86_FEATURE_PKU);
@@ -371,6 +362,9 @@ void identify_cpu(struct cpuinfo_x86 *c)
/* Now the feature flags better reflect actual CPU features! */
+ if ( cpu_has_xsave )
+ xstate_init(c);
+
#ifdef NOISY_CAPS
printk(KERN_DEBUG "CPU: After all inits, caps:");
for (i = 0; i < NCAPINTS; i++)
diff --git a/xen/arch/x86/xstate.c b/xen/arch/x86/xstate.c
index a5ed9e5..dcccb9f 100644
--- a/xen/arch/x86/xstate.c
+++ b/xen/arch/x86/xstate.c
@@ -513,11 +513,15 @@ unsigned int xstate_ctxt_size(u64 xcr0)
/* Collect the information of processor's extended state */
void xstate_init(struct cpuinfo_x86 *c)
{
+ static bool_t __initdata use_xsave = 1;
+ boolean_param("xsave", use_xsave);
+
bool_t bsp = c == &boot_cpu_data;
u32 eax, ebx, ecx, edx;
u64 feature_mask;
- if ( boot_cpu_data.cpuid_level < XSTATE_CPUID )
+ if ( (bsp && !use_xsave) ||
+ boot_cpu_data.cpuid_level < XSTATE_CPUID )
{
BUG_ON(!bsp);
setup_clear_cpu_cap(X86_FEATURE_XSAVE);
--
2.1.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
next prev parent reply other threads:[~2016-03-15 15:35 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-15 15:34 [PATCH RFC v3 00/28] x86: Improvements to cpuid handling for guests Andrew Cooper
2016-03-15 15:34 ` [PATCH v3 01/28] xen/x86: Drop unused and non-useful feature definitions Andrew Cooper
2016-03-16 7:53 ` Konrad Rzeszutek Wilk
2016-03-16 9:49 ` Andrew Cooper
2016-03-22 14:06 ` Doug Goldstein
2016-03-22 14:38 ` Jan Beulich
2016-03-15 15:34 ` [PATCH v3 02/28] xen/x86: Rename features to be closer to the vendor definitions Andrew Cooper
2016-03-16 8:01 ` Konrad Rzeszutek Wilk
2016-03-17 19:46 ` Andrew Cooper
2016-03-15 15:34 ` [PATCH v3 03/28] xen/public: Export cpu featureset information in the public API Andrew Cooper
2016-03-16 8:32 ` Konrad Rzeszutek Wilk
2016-03-22 10:39 ` Andrew Cooper
2016-03-18 15:52 ` Jan Beulich
2016-03-15 15:35 ` [PATCH v3 04/28] xen/x86: Script to automatically process featureset information Andrew Cooper
2016-03-16 8:41 ` Konrad Rzeszutek Wilk
2016-03-15 15:35 ` [PATCH v3 05/28] xen/x86: Collect more cpuid feature leaves Andrew Cooper
2016-03-16 8:50 ` Konrad Rzeszutek Wilk
2016-03-15 15:35 ` [PATCH v3 06/28] xen/x86: Mask out unknown features from Xen's capabilities Andrew Cooper
2016-03-16 18:01 ` Konrad Rzeszutek Wilk
2016-03-15 15:35 ` [PATCH v3 07/28] xen/x86: Annotate special features Andrew Cooper
2016-03-16 18:04 ` Konrad Rzeszutek Wilk
2016-03-18 16:29 ` Jan Beulich
2016-03-15 15:35 ` [PATCH v3 08/28] xen/x86: Annotate VM applicability in featureset Andrew Cooper
2016-03-16 18:15 ` Konrad Rzeszutek Wilk
2016-03-18 16:57 ` Jan Beulich
2016-03-18 18:56 ` Andrew Cooper
2016-03-21 11:53 ` Jan Beulich
2016-03-21 13:39 ` Andrew Cooper
2016-03-15 15:35 ` [PATCH v3 09/28] xen/x86: Calculate maximum host and guest featuresets Andrew Cooper
2016-03-16 18:24 ` Konrad Rzeszutek Wilk
2016-03-18 17:09 ` Jan Beulich
2016-03-22 11:23 ` Andrew Cooper
2016-03-22 12:39 ` Jan Beulich
2016-03-22 14:37 ` Andrew Cooper
2016-03-22 14:52 ` Jan Beulich
2016-03-22 15:01 ` Andrew Cooper
2016-03-22 16:10 ` Jan Beulich
2016-03-15 15:35 ` [PATCH v3 10/28] xen/x86: Generate deep dependencies of features Andrew Cooper
2016-03-17 19:45 ` Konrad Rzeszutek Wilk
2016-03-17 20:14 ` Andrew Cooper
2016-03-17 20:32 ` Konrad Rzeszutek Wilk
2016-03-21 15:41 ` Jan Beulich
2016-03-15 15:35 ` [PATCH v3 11/28] xen/x86: Clear dependent features when clearing a cpu cap Andrew Cooper
2016-03-17 19:51 ` Konrad Rzeszutek Wilk
2016-03-17 19:56 ` Andrew Cooper
2016-03-28 15:02 ` Konrad Rzeszutek Wilk
2016-03-21 15:45 ` Jan Beulich
2016-03-15 15:35 ` Andrew Cooper [this message]
2016-03-15 15:35 ` [PATCH v3 13/28] xen/x86: Improvements to in-hypervisor cpuid sanity checks Andrew Cooper
2016-03-21 16:11 ` Jan Beulich
2016-03-22 15:30 ` Andrew Cooper
2016-03-15 15:35 ` [PATCH v3 14/28] x86/cpu: Move set_cpumask() calls into c_early_init() Andrew Cooper
2016-03-21 16:16 ` Jan Beulich
2016-03-15 15:35 ` [PATCH v3 15/28] x86/cpu: Sysctl and common infrastructure for levelling context switching Andrew Cooper
2016-03-15 17:35 ` Joao Martins
2016-03-15 19:29 ` Andrew Cooper
2016-03-15 19:34 ` Joao Martins
2016-03-21 16:23 ` Jan Beulich
2016-03-22 15:57 ` Andrew Cooper
2016-03-22 16:16 ` Jan Beulich
2016-03-15 15:35 ` [PATCH v3 16/28] x86/cpu: Rework AMD masking MSR setup Andrew Cooper
2016-03-21 16:51 ` Jan Beulich
2016-03-21 16:55 ` Andrew Cooper
2016-03-15 15:35 ` [PATCH v3 17/28] x86/cpu: Rework Intel masking/faulting setup Andrew Cooper
2016-03-21 16:44 ` Jan Beulich
2016-03-15 15:35 ` [PATCH v3 18/28] x86/cpu: Context switch cpuid masks and faulting state in context_switch() Andrew Cooper
2016-03-15 15:35 ` [PATCH v3 19/28] x86/pv: Provide custom cpumasks for PV domains Andrew Cooper
2016-03-21 16:53 ` Jan Beulich
2016-03-15 15:35 ` [PATCH v3 20/28] x86/domctl: Update PV domain cpumasks when setting cpuid policy Andrew Cooper
2016-03-21 17:06 ` Jan Beulich
2016-03-22 16:37 ` Andrew Cooper
2016-03-22 16:51 ` Jan Beulich
2016-03-15 15:35 ` [PATCH v3 21/28] xen+tools: Export maximum host and guest cpu featuresets via SYSCTL Andrew Cooper
2016-03-16 18:23 ` Wei Liu
2016-03-16 20:38 ` David Scott
2016-03-22 8:43 ` Jan Beulich
2016-03-22 20:39 ` Andrew Cooper
2016-03-15 15:35 ` [PATCH v3 22/28] tools/libxc: Modify bitmap operations to take void pointers Andrew Cooper
2016-03-16 15:24 ` Andrew Cooper
2016-03-17 12:17 ` Wei Liu
2016-03-15 15:35 ` [PATCH v3 23/28] tools/libxc: Use public/featureset.h for cpuid policy generation Andrew Cooper
2016-03-15 15:35 ` [PATCH v3 24/28] tools/libxc: Expose the automatically generated cpu featuremask information Andrew Cooper
2016-03-15 15:35 ` [PATCH v3 25/28] tools: Utility for dealing with featuresets Andrew Cooper
2016-03-16 18:23 ` Wei Liu
2016-03-15 15:35 ` [PATCH v3 26/28] tools/libxc: Wire a featureset through to cpuid policy logic Andrew Cooper
2016-03-15 15:35 ` [PATCH v3 27/28] tools/libxc: Use featuresets rather than guesswork Andrew Cooper
2016-03-15 15:35 ` [PATCH v3 28/28] tools/libxc: Calculate xstate cpuid leaf from guest information Andrew Cooper
2016-03-16 18:23 ` Wei Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458056124-8024-13-git-send-email-andrew.cooper3@citrix.com \
--to=andrew.cooper3@citrix.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).