From: Bhupinder Thakur <bhupinder.thakur@linaro.org>
To: xen-devel@lists.xenproject.org
Cc: Julien Grall <julien.grall@arm.com>,
Stefano Stabellini <sstabellini@kernel.org>
Subject: [PATCH 01/14 v4] xen/arm: vpl011: Move vgic register access functions to vreg.h
Date: Tue, 6 Jun 2017 22:55:16 +0530 [thread overview]
Message-ID: <1496769929-23355-2-git-send-email-bhupinder.thakur@linaro.org> (raw)
In-Reply-To: <1496769929-23355-1-git-send-email-bhupinder.thakur@linaro.org>
These functions are generic in nature and can be reused by other emulation
code in Xen. One recent example is pl011 emulation, which needs similar
functions to read/write the registers.
This patch moves the register access function definitions from vgic.h to
vreg.h.
Signed-off-by: Bhupinder Thakur <bhupinder.thakur@linaro.org>
---
CC: ss
CC: jg
Changes since v3:
- Moved the macro call VGIC_REG_HELPERS to vreg.h from vgic.h.
xen/include/asm-arm/vgic.h | 111 +--------------------------------------------
xen/include/asm-arm/vreg.h | 110 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 111 insertions(+), 110 deletions(-)
diff --git a/xen/include/asm-arm/vgic.h b/xen/include/asm-arm/vgic.h
index 544867a..75c716e 100644
--- a/xen/include/asm-arm/vgic.h
+++ b/xen/include/asm-arm/vgic.h
@@ -20,6 +20,7 @@
#include <xen/bitops.h>
#include <asm/mmio.h>
+#include <asm-arm/vreg.h>
struct pending_irq
{
@@ -171,116 +172,6 @@ static inline int REG_RANK_NR(int b, uint32_t n)
}
}
-#define VGIC_REG_MASK(size) ((~0UL) >> (BITS_PER_LONG - ((1 << (size)) * 8)))
-
-/*
- * The check on the size supported by the register has to be done by
- * the caller of vgic_regN_*.
- *
- * vgic_reg_* should never be called directly. Instead use the vgic_regN_*
- * according to size of the emulated register
- *
- * Note that the alignment fault will always be taken in the guest
- * (see B3.12.7 DDI0406.b).
- */
-static inline register_t vgic_reg_extract(unsigned long reg,
- unsigned int offset,
- enum dabt_size size)
-{
- reg >>= 8 * offset;
- reg &= VGIC_REG_MASK(size);
-
- return reg;
-}
-
-static inline void vgic_reg_update(unsigned long *reg, register_t val,
- unsigned int offset,
- enum dabt_size size)
-{
- unsigned long mask = VGIC_REG_MASK(size);
- int shift = offset * 8;
-
- *reg &= ~(mask << shift);
- *reg |= ((unsigned long)val & mask) << shift;
-}
-
-static inline void vgic_reg_setbits(unsigned long *reg, register_t bits,
- unsigned int offset,
- enum dabt_size size)
-{
- unsigned long mask = VGIC_REG_MASK(size);
- int shift = offset * 8;
-
- *reg |= ((unsigned long)bits & mask) << shift;
-}
-
-static inline void vgic_reg_clearbits(unsigned long *reg, register_t bits,
- unsigned int offset,
- enum dabt_size size)
-{
- unsigned long mask = VGIC_REG_MASK(size);
- int shift = offset * 8;
-
- *reg &= ~(((unsigned long)bits & mask) << shift);
-}
-
-/* N-bit register helpers */
-#define VGIC_REG_HELPERS(sz, offmask) \
-static inline register_t vgic_reg##sz##_extract(uint##sz##_t reg, \
- const mmio_info_t *info)\
-{ \
- return vgic_reg_extract(reg, info->gpa & offmask, \
- info->dabt.size); \
-} \
- \
-static inline void vgic_reg##sz##_update(uint##sz##_t *reg, \
- register_t val, \
- const mmio_info_t *info) \
-{ \
- unsigned long tmp = *reg; \
- \
- vgic_reg_update(&tmp, val, info->gpa & offmask, \
- info->dabt.size); \
- \
- *reg = tmp; \
-} \
- \
-static inline void vgic_reg##sz##_setbits(uint##sz##_t *reg, \
- register_t bits, \
- const mmio_info_t *info) \
-{ \
- unsigned long tmp = *reg; \
- \
- vgic_reg_setbits(&tmp, bits, info->gpa & offmask, \
- info->dabt.size); \
- \
- *reg = tmp; \
-} \
- \
-static inline void vgic_reg##sz##_clearbits(uint##sz##_t *reg, \
- register_t bits, \
- const mmio_info_t *info) \
-{ \
- unsigned long tmp = *reg; \
- \
- vgic_reg_clearbits(&tmp, bits, info->gpa & offmask, \
- info->dabt.size); \
- \
- *reg = tmp; \
-}
-
-/*
- * 64 bits registers are only supported on platform with 64-bit long.
- * This is also allow us to optimize the 32 bit case by using
- * unsigned long rather than uint64_t
- */
-#if BITS_PER_LONG == 64
-VGIC_REG_HELPERS(64, 0x7);
-#endif
-VGIC_REG_HELPERS(32, 0x3);
-
-#undef VGIC_REG_HELPERS
-
enum gic_sgi_mode;
/*
diff --git a/xen/include/asm-arm/vreg.h b/xen/include/asm-arm/vreg.h
index ed2bd6f..348584f 100644
--- a/xen/include/asm-arm/vreg.h
+++ b/xen/include/asm-arm/vreg.h
@@ -107,4 +107,114 @@ static inline bool vreg_emulate_sysreg64(struct cpu_user_regs *regs, union hsr h
#endif
+#define VGIC_REG_MASK(size) ((~0UL) >> (BITS_PER_LONG - ((1 << (size)) * 8)))
+
+/*
+ * The check on the size supported by the register has to be done by
+ * the caller of vgic_regN_*.
+ *
+ * vgic_reg_* should never be called directly. Instead use the vgic_regN_*
+ * according to size of the emulated register
+ *
+ * Note that the alignment fault will always be taken in the guest
+ * (see B3.12.7 DDI0406.b).
+ */
+static inline register_t vgic_reg_extract(unsigned long reg,
+ unsigned int offset,
+ enum dabt_size size)
+{
+ reg >>= 8 * offset;
+ reg &= VGIC_REG_MASK(size);
+
+ return reg;
+}
+
+static inline void vgic_reg_update(unsigned long *reg, register_t val,
+ unsigned int offset,
+ enum dabt_size size)
+{
+ unsigned long mask = VGIC_REG_MASK(size);
+ int shift = offset * 8;
+
+ *reg &= ~(mask << shift);
+ *reg |= ((unsigned long)val & mask) << shift;
+}
+
+static inline void vgic_reg_setbits(unsigned long *reg, register_t bits,
+ unsigned int offset,
+ enum dabt_size size)
+{
+ unsigned long mask = VGIC_REG_MASK(size);
+ int shift = offset * 8;
+
+ *reg |= ((unsigned long)bits & mask) << shift;
+}
+
+static inline void vgic_reg_clearbits(unsigned long *reg, register_t bits,
+ unsigned int offset,
+ enum dabt_size size)
+{
+ unsigned long mask = VGIC_REG_MASK(size);
+ int shift = offset * 8;
+
+ *reg &= ~(((unsigned long)bits & mask) << shift);
+}
+
+/* N-bit register helpers */
+#define VGIC_REG_HELPERS(sz, offmask) \
+static inline register_t vgic_reg##sz##_extract(uint##sz##_t reg, \
+ const mmio_info_t *info)\
+{ \
+ return vgic_reg_extract(reg, info->gpa & offmask, \
+ info->dabt.size); \
+} \
+ \
+static inline void vgic_reg##sz##_update(uint##sz##_t *reg, \
+ register_t val, \
+ const mmio_info_t *info) \
+{ \
+ unsigned long tmp = *reg; \
+ \
+ vgic_reg_update(&tmp, val, info->gpa & offmask, \
+ info->dabt.size); \
+ \
+ *reg = tmp; \
+} \
+ \
+static inline void vgic_reg##sz##_setbits(uint##sz##_t *reg, \
+ register_t bits, \
+ const mmio_info_t *info) \
+{ \
+ unsigned long tmp = *reg; \
+ \
+ vgic_reg_setbits(&tmp, bits, info->gpa & offmask, \
+ info->dabt.size); \
+ \
+ *reg = tmp; \
+} \
+ \
+static inline void vgic_reg##sz##_clearbits(uint##sz##_t *reg, \
+ register_t bits, \
+ const mmio_info_t *info) \
+{ \
+ unsigned long tmp = *reg; \
+ \
+ vgic_reg_clearbits(&tmp, bits, info->gpa & offmask, \
+ info->dabt.size); \
+ \
+ *reg = tmp; \
+}
+
+/*
+ * 64 bits registers are only supported on platform with 64-bit long.
+ * This is also allow us to optimize the 32 bit case by using
+ * unsigned long rather than uint64_t
+ */
+#if BITS_PER_LONG == 64
+VGIC_REG_HELPERS(64, 0x7);
+#endif
+VGIC_REG_HELPERS(32, 0x3);
+
+#undef VGIC_REG_HELPERS
+
#endif /* __ASM_ARM_VREG__ */
--
2.7.4
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
next prev parent reply other threads:[~2017-06-06 17:25 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-06 17:25 [PATCH 00/14 v4] PL011 emulation support in Xen Bhupinder Thakur
2017-06-06 17:25 ` Bhupinder Thakur [this message]
2017-06-09 12:49 ` [PATCH 01/14 v4] xen/arm: vpl011: Move vgic register access functions to vreg.h Julien Grall
2017-06-06 17:25 ` [PATCH 02/14 v4] xen/arm: vpl011: Define generic vreg_reg* access functions in vreg.h Bhupinder Thakur
2017-06-09 12:54 ` Julien Grall
2017-06-19 9:33 ` Andre Przywara
2017-06-19 16:53 ` Bhupinder Thakur
2017-06-19 16:59 ` Andre Przywara
2017-06-06 17:25 ` [PATCH 03/14 v4] xen/arm: vpl011: Add pl011 uart emulation in Xen Bhupinder Thakur
2017-06-06 23:02 ` Stefano Stabellini
2017-06-09 13:15 ` Julien Grall
2017-06-09 18:02 ` Stefano Stabellini
2017-06-13 8:58 ` Bhupinder Thakur
2017-06-13 9:25 ` Julien Grall
2017-06-09 13:54 ` Julien Grall
2017-06-13 10:57 ` Bhupinder Thakur
2017-06-13 12:44 ` Julien Grall
2017-06-13 17:50 ` Stefano Stabellini
2017-06-14 5:47 ` Bhupinder Thakur
2017-06-14 9:33 ` Julien Grall
2017-06-19 10:14 ` Andre Przywara
2017-06-22 5:16 ` Bhupinder Thakur
2017-06-23 12:45 ` Julien Grall
2017-06-06 17:25 ` [PATCH 04/14 v4] xen/arm: vpl011: Add support for vuart in libxl Bhupinder Thakur
2017-06-06 23:07 ` Stefano Stabellini
2017-06-06 17:25 ` [PATCH 05/14 v4] xen/arm: vpl011: Allocate a new GFN in the toolstack for vuart Bhupinder Thakur
2017-06-06 23:17 ` Stefano Stabellini
2017-06-07 16:43 ` Wei Liu
2017-06-06 17:25 ` [PATCH 06/14 v4] xen/arm: vpl011: Add a new domctl API to initialize vpl011 Bhupinder Thakur
2017-06-06 23:26 ` Stefano Stabellini
2017-06-09 14:06 ` Julien Grall
2017-06-09 18:32 ` Stefano Stabellini
2017-06-14 7:35 ` Bhupinder Thakur
2017-06-14 8:34 ` Bhupinder Thakur
2017-06-09 14:13 ` Julien Grall
2017-06-14 9:16 ` Bhupinder Thakur
2017-06-14 10:15 ` Julien Grall
2017-06-15 6:33 ` Bhupinder Thakur
2017-06-19 10:59 ` Bhupinder Thakur
2017-06-19 11:01 ` Julien Grall
2017-06-19 11:47 ` Wei Liu
2017-06-19 13:11 ` Bhupinder Thakur
2017-06-20 11:16 ` Julien Grall
2017-06-20 11:42 ` Wei Liu
2017-06-21 10:18 ` Bhupinder Thakur
2017-06-06 17:25 ` [PATCH 07/14 v4] xen/arm: vpl011: Add a new vuart node in the xenstore Bhupinder Thakur
2017-06-06 23:38 ` Stefano Stabellini
2017-06-06 17:25 ` [PATCH 08/14 v4] xen/arm: vpl011: Modify xenconsole to define and use a new console structure Bhupinder Thakur
2017-06-07 1:13 ` Stefano Stabellini
2017-06-06 17:25 ` [PATCH 09/14 v4] xen/arm: vpl011: Modify xenconsole functions to take console structure as input Bhupinder Thakur
2017-06-07 0:43 ` Stefano Stabellini
2017-06-06 17:25 ` [PATCH 10/14 v4] xen/arm: vpl011: Modify xenconsole to support multiple consoles Bhupinder Thakur
2017-06-07 1:03 ` Stefano Stabellini
2017-06-07 3:51 ` Bhupinder Thakur
2017-06-07 16:46 ` Wei Liu
2017-06-07 17:54 ` Stefano Stabellini
2017-06-06 17:25 ` [PATCH 11/14 v4] xen/arm: vpl011: Add support for vuart console in xenconsole Bhupinder Thakur
2017-06-07 1:08 ` Stefano Stabellini
2017-06-07 16:44 ` Wei Liu
2017-06-06 17:25 ` [PATCH 12/14 v4] xen/arm: vpl011: Add a new vuart console type to xenconsole client Bhupinder Thakur
2017-06-06 23:41 ` Stefano Stabellini
2017-06-06 17:25 ` [PATCH 13/14 v4] xen/arm: vpl011: Add a pl011 uart DT node in the guest device tree Bhupinder Thakur
2017-06-06 17:25 ` [PATCH 14/14 v4] xen/arm: vpl011: Update documentation for vuart console support Bhupinder Thakur
2017-06-09 13:58 ` [PATCH 00/14 v4] PL011 emulation support in Xen Julien Grall
-- strict thread matches above, loose matches on Subject: below --
2017-06-06 10:01 [PATCH 01/14 v4] xen/arm: vpl011: Move vgic register access functions to vreg.h Bhupinder Thakur
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1496769929-23355-2-git-send-email-bhupinder.thakur@linaro.org \
--to=bhupinder.thakur@linaro.org \
--cc=julien.grall@arm.com \
--cc=sstabellini@kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).