* [PATCH v8 0/2] Minimal build for RISCV @ 2021-06-04 2:14 Connor Davis 2021-06-04 2:14 ` [PATCH v8 1/2] xen/char: Default HAS_NS16550 to y only for X86 and ARM Connor Davis 2021-06-04 2:14 ` [PATCH v8 2/2] xen: Add files needed for minimal riscv build Connor Davis 0 siblings, 2 replies; 5+ messages in thread From: Connor Davis @ 2021-06-04 2:14 UTC (permalink / raw) To: xen-devel Cc: Bobby Eshleman, Alistair Francis, Connor Davis, Andrew Cooper, George Dunlap, Ian Jackson, Jan Beulich, Julien Grall, Stefano Stabellini, Wei Liu, Alistair Francis Hi all, This series introduces a minimal build for RISCV. It is based on Bobby's previous work from last year[0] rebased onto current Xen. This series provides the patches necessary to get a minimal build working. The build is "minimal" in the sense that it only supports building TARGET=riscv64/head.o. The arch/riscv/riscv64/head.S is just a simple while(1). The first patch is a mod to non-RISCV bits that enable building a config with !CONFIG_HAS_NS16550. The second patch adds the make/Kconfig boilerplate alongside head.S and asm-riscv/config.h (head.S references ENTRY that is defined in asm-riscv/config.h). [0] https://lore.kernel.org/xen-devel/cover.1579615303.git.bobbyeshleman@gmail.com/ Thanks, Connor -- Changes since v7: - Default to y for RISCV_ISA_C Kconfig option (i.e. build Xen with compressed instructions by default) - Added Alistair to MAINTAINERS Changes since v6: - Make sure patch versions are consistent Changes since v5: - Added missing A-by from Jan to patch 1 Changes since v4: - Dropped patches 2 and 4 as these have been applied - Moved arch/riscv/head.S to arch/riscv/riscv64/head.S for consistency with ARM. - Added Bob and myself to MAINTAINERS Changes since v3: - Dropped "xen: Fix build when !CONFIG_GRANT_TABLE" since this was applied by Jan - Adjusted Kconfig condition for building NS16550 - Use bool rather than bool_t - Removed riscv memory map, as this should probably be done later once the frametable size is figured out - Consolidated 64-bit #defines in asm-riscv/config.h - Renamed riscv64_defconfig to tiny64_defconfig, added CONFIG_DEBUG and CONFIG_DEBUG_INFO - Fixed logic/alignment/whitespace issues in Kconfig files - Use upstream archlinux riscv64 cross-compiler packages instead of custom built toolchain in docker container Changes since v2: - Reduced number of riscv files added to ease review Changes since v1: - Dropped "xen/sched: Fix build when NR_CPUS == 1" since this was fixed for 4.15 - Moved #ifdef-ary around iommu_enabled to iommu.h - Moved struct grant_table declaration above ifdef CONFIG_GRANT_TABLE -- Connor Davis (2): xen/char: Default HAS_NS16550 to y only for X86 and ARM xen: Add files needed for minimal riscv build MAINTAINERS | 9 +++++ config/riscv64.mk | 5 +++ xen/Makefile | 8 +++-- xen/arch/riscv/Kconfig | 48 +++++++++++++++++++++++++ xen/arch/riscv/Kconfig.debug | 0 xen/arch/riscv/Makefile | 2 ++ xen/arch/riscv/Rules.mk | 0 xen/arch/riscv/arch.mk | 14 ++++++++ xen/arch/riscv/configs/tiny64_defconfig | 13 +++++++ xen/arch/riscv/riscv64/asm-offsets.c | 0 xen/arch/riscv/riscv64/head.S | 6 ++++ xen/drivers/char/Kconfig | 1 + xen/include/asm-riscv/config.h | 47 ++++++++++++++++++++++++ 13 files changed, 151 insertions(+), 2 deletions(-) create mode 100644 config/riscv64.mk create mode 100644 xen/arch/riscv/Kconfig create mode 100644 xen/arch/riscv/Kconfig.debug create mode 100644 xen/arch/riscv/Makefile create mode 100644 xen/arch/riscv/Rules.mk create mode 100644 xen/arch/riscv/arch.mk create mode 100644 xen/arch/riscv/configs/tiny64_defconfig create mode 100644 xen/arch/riscv/riscv64/asm-offsets.c create mode 100644 xen/arch/riscv/riscv64/head.S create mode 100644 xen/include/asm-riscv/config.h -- 2.31.1 ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v8 1/2] xen/char: Default HAS_NS16550 to y only for X86 and ARM 2021-06-04 2:14 [PATCH v8 0/2] Minimal build for RISCV Connor Davis @ 2021-06-04 2:14 ` Connor Davis 2021-06-04 2:14 ` [PATCH v8 2/2] xen: Add files needed for minimal riscv build Connor Davis 1 sibling, 0 replies; 5+ messages in thread From: Connor Davis @ 2021-06-04 2:14 UTC (permalink / raw) To: xen-devel Cc: Bobby Eshleman, Alistair Francis, Connor Davis, Andrew Cooper, George Dunlap, Ian Jackson, Jan Beulich, Julien Grall, Stefano Stabellini, Wei Liu, Alistair Francis Defaulting to yes only for X86 and ARM reduces the requirements for a minimal build when porting new architectures. Signed-off-by: Connor Davis <connojdavis@gmail.com> Acked-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> --- xen/drivers/char/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/xen/drivers/char/Kconfig b/xen/drivers/char/Kconfig index b572305657..2ff5b288e2 100644 --- a/xen/drivers/char/Kconfig +++ b/xen/drivers/char/Kconfig @@ -1,5 +1,6 @@ config HAS_NS16550 bool "NS16550 UART driver" if ARM + default n if RISCV default y help This selects the 16550-series UART support. For most systems, say Y. -- 2.31.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v8 2/2] xen: Add files needed for minimal riscv build 2021-06-04 2:14 [PATCH v8 0/2] Minimal build for RISCV Connor Davis 2021-06-04 2:14 ` [PATCH v8 1/2] xen/char: Default HAS_NS16550 to y only for X86 and ARM Connor Davis @ 2021-06-04 2:14 ` Connor Davis 2021-06-08 10:44 ` Jan Beulich 2021-06-08 19:08 ` Bob Eshleman 1 sibling, 2 replies; 5+ messages in thread From: Connor Davis @ 2021-06-04 2:14 UTC (permalink / raw) To: xen-devel Cc: Bobby Eshleman, Alistair Francis, Connor Davis, Andrew Cooper, George Dunlap, Ian Jackson, Jan Beulich, Julien Grall, Stefano Stabellini, Wei Liu, Alistair Francis Add arch-specific makefiles and configs needed to build for riscv. Also add a minimal head.S that is a simple infinite loop. head.o can be built with $ make XEN_TARGET_ARCH=riscv64 SUBSYSTEMS=xen -C xen tiny64_defconfig $ make XEN_TARGET_ARCH=riscv64 SUBSYSTEMS=xen -C xen TARGET=riscv64/head.o No other TARGET is supported at the moment. Signed-off-by: Connor Davis <connojdavis@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> --- MAINTAINERS | 9 +++++ config/riscv64.mk | 5 +++ xen/Makefile | 8 +++-- xen/arch/riscv/Kconfig | 48 +++++++++++++++++++++++++ xen/arch/riscv/Kconfig.debug | 0 xen/arch/riscv/Makefile | 2 ++ xen/arch/riscv/Rules.mk | 0 xen/arch/riscv/arch.mk | 14 ++++++++ xen/arch/riscv/configs/tiny64_defconfig | 13 +++++++ xen/arch/riscv/riscv64/asm-offsets.c | 0 xen/arch/riscv/riscv64/head.S | 6 ++++ xen/include/asm-riscv/config.h | 47 ++++++++++++++++++++++++ 12 files changed, 150 insertions(+), 2 deletions(-) create mode 100644 config/riscv64.mk create mode 100644 xen/arch/riscv/Kconfig create mode 100644 xen/arch/riscv/Kconfig.debug create mode 100644 xen/arch/riscv/Makefile create mode 100644 xen/arch/riscv/Rules.mk create mode 100644 xen/arch/riscv/arch.mk create mode 100644 xen/arch/riscv/configs/tiny64_defconfig create mode 100644 xen/arch/riscv/riscv64/asm-offsets.c create mode 100644 xen/arch/riscv/riscv64/head.S create mode 100644 xen/include/asm-riscv/config.h diff --git a/MAINTAINERS b/MAINTAINERS index d46b08a0d2..5a1f92422a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -456,6 +456,15 @@ F: tools/libs/light/libxl_nonetbuffer.c F: tools/hotplug/Linux/remus-netbuf-setup F: tools/hotplug/Linux/block-drbd-probe +RISCV +M: Bob Eshleman <bobbyeshleman@gmail.com> +M: Alistair Francis <alistair.francis@wdc.com> +R: Connor Davis <connojdavis@gmail.com> +S: Supported +F: config/riscv64.mk +F: xen/arch/riscv/ +F: xen/include/asm-riscv/ + RTDS SCHEDULER M: Dario Faggioli <dfaggioli@suse.com> M: Meng Xu <mengxu@cis.upenn.edu> diff --git a/config/riscv64.mk b/config/riscv64.mk new file mode 100644 index 0000000000..a5a21e5fa2 --- /dev/null +++ b/config/riscv64.mk @@ -0,0 +1,5 @@ +CONFIG_RISCV := y +CONFIG_RISCV_64 := y +CONFIG_RISCV_$(XEN_OS) := y + +CONFIG_XEN_INSTALL_SUFFIX := diff --git a/xen/Makefile b/xen/Makefile index 7ce7692354..89879fad4c 100644 --- a/xen/Makefile +++ b/xen/Makefile @@ -26,7 +26,9 @@ MAKEFLAGS += -rR EFI_MOUNTPOINT ?= $(BOOT_DIR)/efi ARCH=$(XEN_TARGET_ARCH) -SRCARCH=$(shell echo $(ARCH) | sed -e 's/x86.*/x86/' -e s'/arm\(32\|64\)/arm/g') +SRCARCH=$(shell echo $(ARCH) | \ + sed -e 's/x86.*/x86/' -e s'/arm\(32\|64\)/arm/g' \ + -e s'/riscv.*/riscv/g') # Don't break if the build process wasn't called from the top level # we need XEN_TARGET_ARCH to generate the proper config @@ -35,7 +37,8 @@ include $(XEN_ROOT)/Config.mk # Set ARCH/SUBARCH appropriately. export TARGET_SUBARCH := $(XEN_TARGET_ARCH) export TARGET_ARCH := $(shell echo $(XEN_TARGET_ARCH) | \ - sed -e 's/x86.*/x86/' -e s'/arm\(32\|64\)/arm/g') + sed -e 's/x86.*/x86/' -e s'/arm\(32\|64\)/arm/g' \ + -e s'/riscv.*/riscv/g') # Allow someone to change their config file export KCONFIG_CONFIG ?= .config @@ -335,6 +338,7 @@ _clean: delete-unfresh-files $(MAKE) $(clean) xsm $(MAKE) $(clean) crypto $(MAKE) $(clean) arch/arm + $(MAKE) $(clean) arch/riscv $(MAKE) $(clean) arch/x86 $(MAKE) $(clean) test $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) clean diff --git a/xen/arch/riscv/Kconfig b/xen/arch/riscv/Kconfig new file mode 100644 index 0000000000..468e250c86 --- /dev/null +++ b/xen/arch/riscv/Kconfig @@ -0,0 +1,48 @@ +config RISCV + def_bool y + +config RISCV_64 + def_bool y + select 64BIT + +config ARCH_DEFCONFIG + string + default "arch/riscv/configs/tiny64_defconfig" + +menu "Architecture Features" + +source "arch/Kconfig" + +endmenu + +menu "ISA Selection" + +choice + prompt "Base ISA" + default RISCV_ISA_RV64IMA if RISCV_64 + help + This selects the base ISA extensions that Xen will target. + +config RISCV_ISA_RV64IMA + bool "RV64IMA" + help + Use the RV64I base ISA, plus the "M" and "A" extensions + for integer multiply/divide and atomic instructions, respectively. + +endchoice + +config RISCV_ISA_C + bool "Compressed extension" + default y + help + Add "C" to the ISA subsets that the toolchain is allowed to + emit when building Xen, which results in compressed instructions + in the Xen binary. + + If unsure, say Y. + +endmenu + +source "common/Kconfig" + +source "drivers/Kconfig" diff --git a/xen/arch/riscv/Kconfig.debug b/xen/arch/riscv/Kconfig.debug new file mode 100644 index 0000000000..e69de29bb2 diff --git a/xen/arch/riscv/Makefile b/xen/arch/riscv/Makefile new file mode 100644 index 0000000000..942e4ffbc1 --- /dev/null +++ b/xen/arch/riscv/Makefile @@ -0,0 +1,2 @@ +.PHONY: include +include: diff --git a/xen/arch/riscv/Rules.mk b/xen/arch/riscv/Rules.mk new file mode 100644 index 0000000000..e69de29bb2 diff --git a/xen/arch/riscv/arch.mk b/xen/arch/riscv/arch.mk new file mode 100644 index 0000000000..53dadb8975 --- /dev/null +++ b/xen/arch/riscv/arch.mk @@ -0,0 +1,14 @@ +######################################## +# RISCV-specific definitions + +CFLAGS-$(CONFIG_RISCV_64) += -mabi=lp64 + +riscv-march-$(CONFIG_RISCV_ISA_RV64IMA) := rv64ima +riscv-march-$(CONFIG_RISCV_ISA_C) := $(riscv-march-y)c + +# Note that -mcmodel=medany is used so that Xen can be mapped +# into the upper half _or_ the lower half of the address space. +# -mcmodel=medlow would force Xen into the lower half. + +CFLAGS += -march=$(riscv-march-y) -mstrict-align -mcmodel=medany +CFLAGS += -I$(BASEDIR)/include diff --git a/xen/arch/riscv/configs/tiny64_defconfig b/xen/arch/riscv/configs/tiny64_defconfig new file mode 100644 index 0000000000..3c9a2ff941 --- /dev/null +++ b/xen/arch/riscv/configs/tiny64_defconfig @@ -0,0 +1,13 @@ +# CONFIG_SCHED_CREDIT is not set +# CONFIG_SCHED_RTDS is not set +# CONFIG_SCHED_NULL is not set +# CONFIG_SCHED_ARINC653 is not set +# CONFIG_TRACEBUFFER is not set +# CONFIG_HYPFS is not set +# CONFIG_GRANT_TABLE is not set +# CONFIG_SPECULATIVE_HARDEN_ARRAY is not set + +CONFIG_RISCV_64=y +CONFIG_DEBUG=y +CONFIG_DEBUG_INFO=y +CONFIG_EXPERT=y diff --git a/xen/arch/riscv/riscv64/asm-offsets.c b/xen/arch/riscv/riscv64/asm-offsets.c new file mode 100644 index 0000000000..e69de29bb2 diff --git a/xen/arch/riscv/riscv64/head.S b/xen/arch/riscv/riscv64/head.S new file mode 100644 index 0000000000..0dbc27ba75 --- /dev/null +++ b/xen/arch/riscv/riscv64/head.S @@ -0,0 +1,6 @@ +#include <asm/config.h> + + .text + +ENTRY(start) + j start diff --git a/xen/include/asm-riscv/config.h b/xen/include/asm-riscv/config.h new file mode 100644 index 0000000000..e2ae21de61 --- /dev/null +++ b/xen/include/asm-riscv/config.h @@ -0,0 +1,47 @@ +#ifndef __RISCV_CONFIG_H__ +#define __RISCV_CONFIG_H__ + +#if defined(CONFIG_RISCV_64) +# define LONG_BYTEORDER 3 +# define ELFSIZE 64 +# define MAX_VIRT_CPUS 128u +#else +# error "Unsupported RISCV variant" +#endif + +#define BYTES_PER_LONG (1 << LONG_BYTEORDER) +#define BITS_PER_LONG (BYTES_PER_LONG << 3) +#define POINTER_ALIGN BYTES_PER_LONG + +#define BITS_PER_LLONG 64 + +/* xen_ulong_t is always 64 bits */ +#define BITS_PER_XEN_ULONG 64 + +#define CONFIG_RISCV_L1_CACHE_SHIFT 6 +#define CONFIG_PAGEALLOC_MAX_ORDER 18 +#define CONFIG_DOMU_MAX_ORDER 9 +#define CONFIG_HWDOM_MAX_ORDER 10 + +#define OPT_CONSOLE_STR "dtuart" +#define INVALID_VCPU_ID MAX_VIRT_CPUS + +/* Linkage for RISCV */ +#ifdef __ASSEMBLY__ +#define ALIGN .align 2 + +#define ENTRY(name) \ + .globl name; \ + ALIGN; \ + name: +#endif + +#endif /* __RISCV_CONFIG_H__ */ +/* + * Local variables: + * mode: C + * c-file-style: "BSD" + * c-basic-offset: 4 + * indent-tabs-mode: nil + * End: + */ -- 2.31.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v8 2/2] xen: Add files needed for minimal riscv build 2021-06-04 2:14 ` [PATCH v8 2/2] xen: Add files needed for minimal riscv build Connor Davis @ 2021-06-08 10:44 ` Jan Beulich 2021-06-08 19:08 ` Bob Eshleman 1 sibling, 0 replies; 5+ messages in thread From: Jan Beulich @ 2021-06-08 10:44 UTC (permalink / raw) To: Connor Davis, Bobby Eshleman Cc: Alistair Francis, Andrew Cooper, George Dunlap, Ian Jackson, Julien Grall, Stefano Stabellini, Wei Liu, Alistair Francis, xen-devel On 04.06.2021 04:14, Connor Davis wrote: > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -456,6 +456,15 @@ F: tools/libs/light/libxl_nonetbuffer.c > F: tools/hotplug/Linux/remus-netbuf-setup > F: tools/hotplug/Linux/block-drbd-probe > > +RISCV > +M: Bob Eshleman <bobbyeshleman@gmail.com> > +M: Alistair Francis <alistair.francis@wdc.com> > +R: Connor Davis <connojdavis@gmail.com> > +S: Supported > +F: config/riscv64.mk > +F: xen/arch/riscv/ > +F: xen/include/asm-riscv/ > + > RTDS SCHEDULER > M: Dario Faggioli <dfaggioli@suse.com> > M: Meng Xu <mengxu@cis.upenn.edu> FAOD as per Julien's request for this to be formally complete, I'm waiting for Bob's ack in order to put in this one (together with patch 1, as I did indicate before). Jan ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v8 2/2] xen: Add files needed for minimal riscv build 2021-06-04 2:14 ` [PATCH v8 2/2] xen: Add files needed for minimal riscv build Connor Davis 2021-06-08 10:44 ` Jan Beulich @ 2021-06-08 19:08 ` Bob Eshleman 1 sibling, 0 replies; 5+ messages in thread From: Bob Eshleman @ 2021-06-08 19:08 UTC (permalink / raw) To: Connor Davis, xen-devel Cc: Alistair Francis, Andrew Cooper, George Dunlap, Ian Jackson, Jan Beulich, Julien Grall, Stefano Stabellini, Wei Liu, Alistair Francis On 6/3/21 7:14 PM, Connor Davis wrote: > Add arch-specific makefiles and configs needed to build for > riscv. Also add a minimal head.S that is a simple infinite loop. > head.o can be built with > > $ make XEN_TARGET_ARCH=riscv64 SUBSYSTEMS=xen -C xen tiny64_defconfig > $ make XEN_TARGET_ARCH=riscv64 SUBSYSTEMS=xen -C xen TARGET=riscv64/head.o > > No other TARGET is supported at the moment. > > Signed-off-by: Connor Davis <connojdavis@gmail.com> > Reviewed-by: Alistair Francis <alistair.francis@wdc.com> > --- > MAINTAINERS | 9 +++++ > config/riscv64.mk | 5 +++ > xen/Makefile | 8 +++-- > xen/arch/riscv/Kconfig | 48 +++++++++++++++++++++++++ > xen/arch/riscv/Kconfig.debug | 0 > xen/arch/riscv/Makefile | 2 ++ > xen/arch/riscv/Rules.mk | 0 > xen/arch/riscv/arch.mk | 14 ++++++++ > xen/arch/riscv/configs/tiny64_defconfig | 13 +++++++ > xen/arch/riscv/riscv64/asm-offsets.c | 0 > xen/arch/riscv/riscv64/head.S | 6 ++++ > xen/include/asm-riscv/config.h | 47 ++++++++++++++++++++++++ > 12 files changed, 150 insertions(+), 2 deletions(-) > create mode 100644 config/riscv64.mk > create mode 100644 xen/arch/riscv/Kconfig > create mode 100644 xen/arch/riscv/Kconfig.debug > create mode 100644 xen/arch/riscv/Makefile > create mode 100644 xen/arch/riscv/Rules.mk > create mode 100644 xen/arch/riscv/arch.mk > create mode 100644 xen/arch/riscv/configs/tiny64_defconfig > create mode 100644 xen/arch/riscv/riscv64/asm-offsets.c > create mode 100644 xen/arch/riscv/riscv64/head.S > create mode 100644 xen/include/asm-riscv/config.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index d46b08a0d2..5a1f92422a 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -456,6 +456,15 @@ F: tools/libs/light/libxl_nonetbuffer.c > F: tools/hotplug/Linux/remus-netbuf-setup > F: tools/hotplug/Linux/block-drbd-probe > > +RISCV > +M: Bob Eshleman <bobbyeshleman@gmail.com> > +M: Alistair Francis <alistair.francis@wdc.com> > +R: Connor Davis <connojdavis@gmail.com> > +S: Supported > +F: config/riscv64.mk > +F: xen/arch/riscv/ > +F: xen/include/asm-riscv/ > + > RTDS SCHEDULER > M: Dario Faggioli <dfaggioli@suse.com> > M: Meng Xu <mengxu@cis.upenn.edu> > diff --git a/config/riscv64.mk b/config/riscv64.mk > new file mode 100644 > index 0000000000..a5a21e5fa2 > --- /dev/null > +++ b/config/riscv64.mk > @@ -0,0 +1,5 @@ > +CONFIG_RISCV := y > +CONFIG_RISCV_64 := y > +CONFIG_RISCV_$(XEN_OS) := y > + > +CONFIG_XEN_INSTALL_SUFFIX := > diff --git a/xen/Makefile b/xen/Makefile > index 7ce7692354..89879fad4c 100644 > --- a/xen/Makefile > +++ b/xen/Makefile > @@ -26,7 +26,9 @@ MAKEFLAGS += -rR > EFI_MOUNTPOINT ?= $(BOOT_DIR)/efi > > ARCH=$(XEN_TARGET_ARCH) > -SRCARCH=$(shell echo $(ARCH) | sed -e 's/x86.*/x86/' -e s'/arm\(32\|64\)/arm/g') > +SRCARCH=$(shell echo $(ARCH) | \ > + sed -e 's/x86.*/x86/' -e s'/arm\(32\|64\)/arm/g' \ > + -e s'/riscv.*/riscv/g') > > # Don't break if the build process wasn't called from the top level > # we need XEN_TARGET_ARCH to generate the proper config > @@ -35,7 +37,8 @@ include $(XEN_ROOT)/Config.mk > # Set ARCH/SUBARCH appropriately. > export TARGET_SUBARCH := $(XEN_TARGET_ARCH) > export TARGET_ARCH := $(shell echo $(XEN_TARGET_ARCH) | \ > - sed -e 's/x86.*/x86/' -e s'/arm\(32\|64\)/arm/g') > + sed -e 's/x86.*/x86/' -e s'/arm\(32\|64\)/arm/g' \ > + -e s'/riscv.*/riscv/g') > > # Allow someone to change their config file > export KCONFIG_CONFIG ?= .config > @@ -335,6 +338,7 @@ _clean: delete-unfresh-files > $(MAKE) $(clean) xsm > $(MAKE) $(clean) crypto > $(MAKE) $(clean) arch/arm > + $(MAKE) $(clean) arch/riscv > $(MAKE) $(clean) arch/x86 > $(MAKE) $(clean) test > $(MAKE) -f $(BASEDIR)/tools/kconfig/Makefile.kconfig ARCH=$(ARCH) SRCARCH=$(SRCARCH) clean > diff --git a/xen/arch/riscv/Kconfig b/xen/arch/riscv/Kconfig > new file mode 100644 > index 0000000000..468e250c86 > --- /dev/null > +++ b/xen/arch/riscv/Kconfig > @@ -0,0 +1,48 @@ > +config RISCV > + def_bool y > + > +config RISCV_64 > + def_bool y > + select 64BIT > + > +config ARCH_DEFCONFIG > + string > + default "arch/riscv/configs/tiny64_defconfig" > + > +menu "Architecture Features" > + > +source "arch/Kconfig" > + > +endmenu > + > +menu "ISA Selection" > + > +choice > + prompt "Base ISA" > + default RISCV_ISA_RV64IMA if RISCV_64 > + help > + This selects the base ISA extensions that Xen will target. > + > +config RISCV_ISA_RV64IMA > + bool "RV64IMA" > + help > + Use the RV64I base ISA, plus the "M" and "A" extensions > + for integer multiply/divide and atomic instructions, respectively. > + > +endchoice > + > +config RISCV_ISA_C > + bool "Compressed extension" > + default y > + help > + Add "C" to the ISA subsets that the toolchain is allowed to > + emit when building Xen, which results in compressed instructions > + in the Xen binary. > + > + If unsure, say Y. > + > +endmenu > + > +source "common/Kconfig" > + > +source "drivers/Kconfig" > diff --git a/xen/arch/riscv/Kconfig.debug b/xen/arch/riscv/Kconfig.debug > new file mode 100644 > index 0000000000..e69de29bb2 > diff --git a/xen/arch/riscv/Makefile b/xen/arch/riscv/Makefile > new file mode 100644 > index 0000000000..942e4ffbc1 > --- /dev/null > +++ b/xen/arch/riscv/Makefile > @@ -0,0 +1,2 @@ > +.PHONY: include > +include: > diff --git a/xen/arch/riscv/Rules.mk b/xen/arch/riscv/Rules.mk > new file mode 100644 > index 0000000000..e69de29bb2 > diff --git a/xen/arch/riscv/arch.mk b/xen/arch/riscv/arch.mk > new file mode 100644 > index 0000000000..53dadb8975 > --- /dev/null > +++ b/xen/arch/riscv/arch.mk > @@ -0,0 +1,14 @@ > +######################################## > +# RISCV-specific definitions > + > +CFLAGS-$(CONFIG_RISCV_64) += -mabi=lp64 > + > +riscv-march-$(CONFIG_RISCV_ISA_RV64IMA) := rv64ima > +riscv-march-$(CONFIG_RISCV_ISA_C) := $(riscv-march-y)c > + > +# Note that -mcmodel=medany is used so that Xen can be mapped > +# into the upper half _or_ the lower half of the address space. > +# -mcmodel=medlow would force Xen into the lower half. > + > +CFLAGS += -march=$(riscv-march-y) -mstrict-align -mcmodel=medany > +CFLAGS += -I$(BASEDIR)/include > diff --git a/xen/arch/riscv/configs/tiny64_defconfig b/xen/arch/riscv/configs/tiny64_defconfig > new file mode 100644 > index 0000000000..3c9a2ff941 > --- /dev/null > +++ b/xen/arch/riscv/configs/tiny64_defconfig > @@ -0,0 +1,13 @@ > +# CONFIG_SCHED_CREDIT is not set > +# CONFIG_SCHED_RTDS is not set > +# CONFIG_SCHED_NULL is not set > +# CONFIG_SCHED_ARINC653 is not set > +# CONFIG_TRACEBUFFER is not set > +# CONFIG_HYPFS is not set > +# CONFIG_GRANT_TABLE is not set > +# CONFIG_SPECULATIVE_HARDEN_ARRAY is not set > + > +CONFIG_RISCV_64=y > +CONFIG_DEBUG=y > +CONFIG_DEBUG_INFO=y > +CONFIG_EXPERT=y > diff --git a/xen/arch/riscv/riscv64/asm-offsets.c b/xen/arch/riscv/riscv64/asm-offsets.c > new file mode 100644 > index 0000000000..e69de29bb2 > diff --git a/xen/arch/riscv/riscv64/head.S b/xen/arch/riscv/riscv64/head.S > new file mode 100644 > index 0000000000..0dbc27ba75 > --- /dev/null > +++ b/xen/arch/riscv/riscv64/head.S > @@ -0,0 +1,6 @@ > +#include <asm/config.h> > + > + .text > + > +ENTRY(start) > + j start > diff --git a/xen/include/asm-riscv/config.h b/xen/include/asm-riscv/config.h > new file mode 100644 > index 0000000000..e2ae21de61 > --- /dev/null > +++ b/xen/include/asm-riscv/config.h > @@ -0,0 +1,47 @@ > +#ifndef __RISCV_CONFIG_H__ > +#define __RISCV_CONFIG_H__ > + > +#if defined(CONFIG_RISCV_64) > +# define LONG_BYTEORDER 3 > +# define ELFSIZE 64 > +# define MAX_VIRT_CPUS 128u > +#else > +# error "Unsupported RISCV variant" > +#endif > + > +#define BYTES_PER_LONG (1 << LONG_BYTEORDER) > +#define BITS_PER_LONG (BYTES_PER_LONG << 3) > +#define POINTER_ALIGN BYTES_PER_LONG > + > +#define BITS_PER_LLONG 64 > + > +/* xen_ulong_t is always 64 bits */ > +#define BITS_PER_XEN_ULONG 64 > + > +#define CONFIG_RISCV_L1_CACHE_SHIFT 6 > +#define CONFIG_PAGEALLOC_MAX_ORDER 18 > +#define CONFIG_DOMU_MAX_ORDER 9 > +#define CONFIG_HWDOM_MAX_ORDER 10 > + > +#define OPT_CONSOLE_STR "dtuart" > +#define INVALID_VCPU_ID MAX_VIRT_CPUS > + > +/* Linkage for RISCV */ > +#ifdef __ASSEMBLY__ > +#define ALIGN .align 2 > + > +#define ENTRY(name) \ > + .globl name; \ > + ALIGN; \ > + name: > +#endif > + > +#endif /* __RISCV_CONFIG_H__ */ > +/* > + * Local variables: > + * mode: C > + * c-file-style: "BSD" > + * c-basic-offset: 4 > + * indent-tabs-mode: nil > + * End: > + */ > Acked-by: Bobby Eshleman <bobbyeshleman@gmail.com> ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-06-08 19:08 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-06-04 2:14 [PATCH v8 0/2] Minimal build for RISCV Connor Davis 2021-06-04 2:14 ` [PATCH v8 1/2] xen/char: Default HAS_NS16550 to y only for X86 and ARM Connor Davis 2021-06-04 2:14 ` [PATCH v8 2/2] xen: Add files needed for minimal riscv build Connor Davis 2021-06-08 10:44 ` Jan Beulich 2021-06-08 19:08 ` Bob Eshleman
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).