* Re: [Intel-gfx] [Announcement] Updates to XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] <53D215D3.50608@intel.com> @ 2014-07-29 10:09 ` Dario Faggioli [not found] ` <1406628570.4038.37.camel@Solace> ` (2 subsequent siblings) 3 siblings, 0 replies; 49+ messages in thread From: Dario Faggioli @ 2014-07-29 10:09 UTC (permalink / raw) To: Jike Song Cc: White, Michael L, Dong, Eddie, intel-gfx, Li, Susie, Cowperthwaite, David J, linux-kernel, xen-devel, Haron, Sandra [-- Attachment #1.1: Type: text/plain, Size: 788 bytes --] On ven, 2014-07-25 at 16:31 +0800, Jike Song wrote: > The new source codes are available at the updated github repos: > > Linux: https://github.com/01org/XenGT-Preview-kernel.git > Xen: https://github.com/01org/XenGT-Preview-xen.git > Qemu: https://github.com/01org/XenGT-Preview-qemu.git > Perhaps the info is available somewhere already (in which case, sorry), but what's the (if any) upstreaming plan/status/ETA? I think this info could well be part of these updates. :-) Thanks and Regards, Dario -- <<This happens because I choose it to happen!>> (Raistlin Majere) ----------------------------------------------------------------- Dario Faggioli, Ph.D, http://about.me/dario.faggioli Senior Software Engineer, Citrix Systems R&D Ltd., Cambridge (UK) [-- Attachment #1.2: This is a digitally signed message part --] [-- Type: application/pgp-signature, Size: 181 bytes --] [-- Attachment #2: Type: text/plain, Size: 126 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <1406628570.4038.37.camel@Solace>]
* Re: [Intel-gfx] [Announcement] Updates to XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <1406628570.4038.37.camel@Solace> @ 2014-07-30 9:39 ` Jike Song [not found] ` <53D8BD5E.2090601@intel.com> 1 sibling, 0 replies; 49+ messages in thread From: Jike Song @ 2014-07-30 9:39 UTC (permalink / raw) To: Dario Faggioli Cc: White, Michael L, Dong, Eddie, intel-gfx, Li, Susie, Cowperthwaite, David J, linux-kernel, xen-devel, Haron, Sandra On 07/29/2014 06:09 PM, Dario Faggioli wrote: > Perhaps the info is available somewhere already (in which case, sorry), > but what's the (if any) upstreaming plan/status/ETA? > > I think this info could well be part of these updates. :-) Thanks for your opinion :-) We plan to start the upstreaming work in this quarter. For your information, Wei's IOREQ server enhancement(aka "Extend ioreq-server to support page write protection") is actually part of the upstreaming effort. Patches for different components will be sent out later. > > Thanks and Regards, > Dario > -- Thanks, Jike ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <53D8BD5E.2090601@intel.com>]
* Re: [Intel-gfx] [Announcement] Updates to XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <53D8BD5E.2090601@intel.com> @ 2014-07-31 13:58 ` Dario Faggioli 0 siblings, 0 replies; 49+ messages in thread From: Dario Faggioli @ 2014-07-31 13:58 UTC (permalink / raw) To: Jike Song Cc: White, Michael L, Dong, Eddie, intel-gfx, Li, Susie, Cowperthwaite, David J, linux-kernel, xen-devel, Haron, Sandra [-- Attachment #1.1: Type: text/plain, Size: 1193 bytes --] On mer, 2014-07-30 at 17:39 +0800, Jike Song wrote: > On 07/29/2014 06:09 PM, Dario Faggioli wrote: > > Perhaps the info is available somewhere already (in which case, sorry), > > but what's the (if any) upstreaming plan/status/ETA? > > > > I think this info could well be part of these updates. :-) > > Thanks for your opinion :-) > :-) > We plan to start the upstreaming work in this quarter. For your information, > Wei's IOREQ server enhancement(aka "Extend ioreq-server to support page write protection") > is actually part of the upstreaming effort. > > Patches for different components will be sent out later. > That is fine... Actually, that is quite great to hear! :-) As I said in the original email, I'd add a few words about the upstreaming activity in the following updates. I think, at least in this mailing list, that is a relevant bit of information. :-D Thanks and Regards, Dario -- <<This happens because I choose it to happen!>> (Raistlin Majere) ----------------------------------------------------------------- Dario Faggioli, Ph.D, http://about.me/dario.faggioli Senior Software Engineer, Citrix Systems R&D Ltd., Cambridge (UK) [-- Attachment #1.2: This is a digitally signed message part --] [-- Type: application/pgp-signature, Size: 181 bytes --] [-- Attachment #2: Type: text/plain, Size: 126 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 49+ messages in thread
* Re: [Intel-gfx] [Announcement] 2014-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] <53D215D3.50608@intel.com> 2014-07-29 10:09 ` [Intel-gfx] [Announcement] Updates to XenGT - a Mediated Graphics Passthrough Solution from Intel Dario Faggioli [not found] ` <1406628570.4038.37.camel@Solace> @ 2014-12-04 2:45 ` Jike Song [not found] ` <547FCAAD.2060406@intel.com> 3 siblings, 0 replies; 49+ messages in thread From: Jike Song @ 2014-12-04 2:45 UTC (permalink / raw) To: xen-devel, intel-gfx, linux-kernel Cc: Tian, Kevin, White, Michael L, Dong, Eddie, Li, Susie, Cowperthwaite, David J, Zhou, Chao, Haron, Sandra, Zhu, Libo Hi all, We're pleased to announce a public release to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. The news of this update: - kernel update from 3.11.6 to 3.14.1 - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet - Next update will be around early Jan, 2015 This update consists of: - Windows HVM support with driver version 15.33.3910 - Stability fixes, e.g. stabilize GPU, the GPU hang occurrence rate becomes rare now - Hardware Media Acceleration for Decoding/Encoding/Transcoding, VC1, H264 etc. format supporting - Display enhancements, e.g. DP type is supported for virtual PORT - Display port capability virtualization: with this feature, dom0 manager could freely assign virtual DDI ports to VM, not necessary to check whether the corresponding physical DDI ports are available Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf The new source codes are available at the updated github repos: Linux: https://github.com/01org/XenGT-Preview-kernel.git Xen: https://github.com/01org/XenGT-Preview-xen.git Qemu: https://github.com/01org/XenGT-Preview-qemu.git More information about Intel GVT-g background, architecture, etc can be found at: https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt The previous update can be found here: http://lists.xen.org/archives/html/xen-devel/2014-07/msg03248.html Appreciate your comments! -- Thanks, Jike On 07/25/2014 04:31 PM, Jike Song wrote: > Hi all, > > We're pleased to announce an update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. > > The news of this update: > > - Project code name is "XenGT", now official name is Intel Graphics Virtualization Technology (Intel GVT-g) > - Currently Intel GVT-g supports Intel Processor Graphics built into 4th generation Intel Core processors - Haswell platform > - Moving forward, XenGT will change to quarterly release cadence. Next update will be around early October, 2014. > > This update consists of: > > - Stability fixes, e.g. stable DP support > - Display enhancements, e.g. virtual monitor support. Users can define a virtual monitor type with customized EDID for virtual machines, not necessarily the same as physical monitors. > - Improved support for GPU recovery > - Experimental Windows HVM support. To download the experimental version, see setup guide for details > - Experimental Hardware Media Acceleration for decoding. > > > Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: > > https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf > > > The new source codes are available at the updated github repos: > > Linux: https://github.com/01org/XenGT-Preview-kernel.git > Xen: https://github.com/01org/XenGT-Preview-xen.git > Qemu: https://github.com/01org/XenGT-Preview-qemu.git > > > More information about Intel GVT-g background, architecture, etc can be found at: > > https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian > http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf > https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt > > The previous update can be found here: > > http://lists.xen.org/archives/html/xen-devel/2014-02/msg01848.html > > Appreciate your comments! > > > > > -- > Thanks, > Jike > ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <547FCAAD.2060406@intel.com>]
* Re: [Intel-gfx] [Announcement] 2014-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <547FCAAD.2060406@intel.com> @ 2014-12-04 10:20 ` Fabio Fantoni [not found] ` <5480355E.4050502@m2r.biz> ` (2 subsequent siblings) 3 siblings, 0 replies; 49+ messages in thread From: Fabio Fantoni @ 2014-12-04 10:20 UTC (permalink / raw) To: Jike Song, xen-devel, intel-gfx, linux-kernel Cc: Tian, Kevin, White, Michael L, Dong, Eddie, Li, Susie, Cowperthwaite, David J, Zhou, Chao, Haron, Sandra, Zhu, Libo Il 04/12/2014 03:45, Jike Song ha scritto: > Hi all, > > We're pleased to announce a public release to Intel Graphics > Virtualization Technology (Intel GVT-g, formerly known as XenGT). > Intel GVT-g is a complete vGPU solution with mediated pass-through, > supported today on 4th generation Intel Core(TM) processors with Intel > Graphics processors. A virtual GPU instance is maintained for each VM, > with part of performance critical resources directly assigned. The > capability of running native graphics driver inside a VM, without > hypervisor intervention in performance critical paths, achieves a good > balance among performance, feature, and sharing capability. Though we > only support Xen on Intel Processor Graphics so far, the core logic > can be easily ported to other hypervisors. > > > The news of this update: > > > - kernel update from 3.11.6 to 3.14.1 > > - We plan to integrate Intel GVT-g as a feature in i915 driver. > That effort is still under review, not included in this update yet > > - Next update will be around early Jan, 2015 > > > This update consists of: > > - Windows HVM support with driver version 15.33.3910 > > - Stability fixes, e.g. stabilize GPU, the GPU hang occurrence > rate becomes rare now > > - Hardware Media Acceleration for Decoding/Encoding/Transcoding, > VC1, H264 etc. format supporting > > - Display enhancements, e.g. DP type is supported for virtual PORT > > - Display port capability virtualization: with this feature, dom0 > manager could freely assign virtual DDI ports to VM, not necessary to > check whether the corresponding physical DDI ports are available > > > > Please refer to the new setup guide, which provides step-to-step > details about building/configuring/running Intel GVT-g: > > > https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf > > > > > The new source codes are available at the updated github repos: > > > Linux: https://github.com/01org/XenGT-Preview-kernel.git > > Xen: https://github.com/01org/XenGT-Preview-xen.git > > Qemu: https://github.com/01org/XenGT-Preview-qemu.git > > > More information about Intel GVT-g background, architecture, etc can > be found at: > > > https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian > > > http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf > > > https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt > > > The previous update can be found here: > > > http://lists.xen.org/archives/html/xen-devel/2014-07/msg03248.html > > > Appreciate your comments! Thanks for this very good project. I did a fast look to xen patch about it, I have some small advices: change to tools/examples/xmexample.hvm should be to tools/examples/xlexample.hvm instead since is implemented in xl and not xm. I think is good rebase the patch to latest xen-unstable git that have many changes, for better reviews and for propose it upstream for xen 4.6 if will be good. Thanks for any reply and sorry for my bad english. > > > -- > Thanks, > Jike > > On 07/25/2014 04:31 PM, Jike Song wrote: >> Hi all, >> >> We're pleased to announce an update to Intel Graphics Virtualization >> Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a >> complete vGPU solution with mediated pass-through, supported today on >> 4th generation Intel Core(TM) processors with Intel Graphics >> processors. A virtual GPU instance is maintained for each VM, with >> part of performance critical resources directly assigned. The >> capability of running native graphics driver inside a VM, without >> hypervisor intervention in performance critical paths, achieves a >> good balance among performance, feature, and sharing capability. >> Though we only support Xen on Intel Processor Graphics so far, the >> core logic can be easily ported to other hypervisors. >> >> The news of this update: >> >> - Project code name is "XenGT", now official name is Intel >> Graphics Virtualization Technology (Intel GVT-g) >> - Currently Intel GVT-g supports Intel Processor Graphics built >> into 4th generation Intel Core processors - Haswell platform >> - Moving forward, XenGT will change to quarterly release cadence. >> Next update will be around early October, 2014. >> >> This update consists of: >> >> - Stability fixes, e.g. stable DP support >> - Display enhancements, e.g. virtual monitor support. Users can >> define a virtual monitor type with customized EDID for virtual >> machines, not necessarily the same as physical monitors. >> - Improved support for GPU recovery >> - Experimental Windows HVM support. To download the experimental >> version, see setup guide for details >> - Experimental Hardware Media Acceleration for decoding. >> >> >> Please refer to the new setup guide, which provides step-to-step >> details about building/configuring/running Intel GVT-g: >> >> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >> >> >> >> The new source codes are available at the updated github repos: >> >> Linux: https://github.com/01org/XenGT-Preview-kernel.git >> Xen: https://github.com/01org/XenGT-Preview-xen.git >> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >> >> >> More information about Intel GVT-g background, architecture, etc can >> be found at: >> >> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >> >> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >> >> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >> >> The previous update can be found here: >> >> http://lists.xen.org/archives/html/xen-devel/2014-02/msg01848.html >> >> Appreciate your comments! >> >> >> >> >> -- >> Thanks, >> Jike >> > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xen.org > http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <5480355E.4050502@m2r.biz>]
* Re: [Intel-gfx] [Announcement] 2014-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <5480355E.4050502@m2r.biz> @ 2014-12-04 10:26 ` Tian, Kevin 0 siblings, 0 replies; 49+ messages in thread From: Tian, Kevin @ 2014-12-04 10:26 UTC (permalink / raw) To: Fabio Fantoni, Song, Jike, xen-devel Cc: Zhang, Yu C, White, Michael L, Dong, Eddie, Li, Susie, Cowperthwaite, David J, Zhou, Chao, Haron, Sandra, Zhu, Libo > From: Fabio Fantoni [mailto:fabio.fantoni@m2r.biz] > Sent: Thursday, December 04, 2014 6:20 PM > > Il 04/12/2014 03:45, Jike Song ha scritto: > > Hi all, > > > > We're pleased to announce a public release to Intel Graphics > > Virtualization Technology (Intel GVT-g, formerly known as XenGT). > > Intel GVT-g is a complete vGPU solution with mediated pass-through, > > supported today on 4th generation Intel Core(TM) processors with Intel > > Graphics processors. A virtual GPU instance is maintained for each VM, > > with part of performance critical resources directly assigned. The > > capability of running native graphics driver inside a VM, without > > hypervisor intervention in performance critical paths, achieves a good > > balance among performance, feature, and sharing capability. Though we > > only support Xen on Intel Processor Graphics so far, the core logic > > can be easily ported to other hypervisors. > > > > > > The news of this update: > > > > > > - kernel update from 3.11.6 to 3.14.1 > > > > - We plan to integrate Intel GVT-g as a feature in i915 driver. > > That effort is still under review, not included in this update yet > > > > - Next update will be around early Jan, 2015 > > > > > > This update consists of: > > > > - Windows HVM support with driver version 15.33.3910 > > > > - Stability fixes, e.g. stabilize GPU, the GPU hang occurrence > > rate becomes rare now > > > > - Hardware Media Acceleration for Decoding/Encoding/Transcoding, > > VC1, H264 etc. format supporting > > > > - Display enhancements, e.g. DP type is supported for virtual PORT > > > > - Display port capability virtualization: with this feature, dom0 > > manager could freely assign virtual DDI ports to VM, not necessary to > > check whether the corresponding physical DDI ports are available > > > > > > > > Please refer to the new setup guide, which provides step-to-step > > details about building/configuring/running Intel GVT-g: > > > > > > > https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_G > uide.pdf > > > > > > > > > > The new source codes are available at the updated github repos: > > > > > > Linux: https://github.com/01org/XenGT-Preview-kernel.git > > > > Xen: https://github.com/01org/XenGT-Preview-xen.git > > > > Qemu: https://github.com/01org/XenGT-Preview-qemu.git > > > > > > More information about Intel GVT-g background, architecture, etc can > > be found at: > > > > > > > https://www.usenix.org/conference/atc14/technical-sessions/presentation/tia > n > > > > > > > http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Sum > mit-v7_0.pdf > > > > > > https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt > > > > > > The previous update can be found here: > > > > > > http://lists.xen.org/archives/html/xen-devel/2014-07/msg03248.html > > > > > > Appreciate your comments! > > Thanks for this very good project. > I did a fast look to xen patch about it, I have some small advices: > change to tools/examples/xmexample.hvm should be to > tools/examples/xlexample.hvm instead since is implemented in xl and not xm. > I think is good rebase the patch to latest xen-unstable git that have > many changes, for better reviews and for propose it upstream for xen 4.6 > if will be good. > > Thanks for any reply and sorry for my bad english. > Thanks for suggestion. We're now pushing our Xen hypervisor change, which is much simplified than the code carried in this code drop. That's why we didn't upgrade to latest xen-unstable, until we have necessary changes accepted. At that time, lots of code will be removed and starting from then we'll follow xen-unstable more closely. Thanks, Kevin ^ permalink raw reply [flat|nested] 49+ messages in thread
* Re: [Intel-gfx] [Announcement] 2015-Q1 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <547FCAAD.2060406@intel.com> 2014-12-04 10:20 ` Fabio Fantoni [not found] ` <5480355E.4050502@m2r.biz> @ 2015-01-09 8:51 ` Jike Song [not found] ` <54AF967B.3060503@intel.com> 3 siblings, 0 replies; 49+ messages in thread From: Jike Song @ 2015-01-09 8:51 UTC (permalink / raw) To: xen-devel, intel-gfx, linux-kernel Cc: Tian, Kevin, White, Michael L, Dong, Eddie, Li, Susie, Cowperthwaite, David J, Zhou, Chao, Haron, Sandra, Zhu, Libo, Wang, Hongbo Hi all, We're pleased to announce a public update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. The XenGT project should be considered a work in progress, As such it is n ot a complete product nor should it be considered one., Extra care should be taken when testing and configuring a system to use the XenGT project. The news of this update: - kernel update from 3.14.1 to drm-intel 3.17.0. - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet. - Next update will be around early Apr, 2015. This update consists of: - Including some bug fixes and stability enhancement. - Making XenGT device model to be aware of Broadwell. In this version BDW is not yet functioning. - Available Fence registers number is changed to 32 from 16 to align with HSW hardware. - New cascade interrupt framework for supporting interrupt virtualization on both Haswell and Broadwell. - Add back the gem_vgtbuffer. The previous release did not build that module for 3.14 kernel. In this release, the module is back and rebased to 3.17. - Enable the irq based context switch in vgt driver, which will help reduce the cpu utilization while doing context switch, it is enabled by default, and can be turn off by kernel flag irq_based_ctx_switch. Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf The new source codes are available at the updated github repos: Linux: https://github.com/01org/XenGT-Preview-kernel.git Xen: https://github.com/01org/XenGT-Preview-xen.git Qemu: https://github.com/01org/XenGT-Preview-qemu.git More information about Intel GVT-g background, architecture, etc can be found at: https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt The previous update can be found here: http://lists.xen.org/archives/html/xen-devel/2014-12/msg00474.html Appreciate your comments! -- Thanks, Jike On 12/04/2014 10:45 AM, Jike Song wrote: > Hi all, > > We're pleased to announce a public release to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. > > > The news of this update: > > > - kernel update from 3.11.6 to 3.14.1 > > - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet > > - Next update will be around early Jan, 2015 > > > This update consists of: > > - Windows HVM support with driver version 15.33.3910 > > - Stability fixes, e.g. stabilize GPU, the GPU hang occurrence rate becomes rare now > > - Hardware Media Acceleration for Decoding/Encoding/Transcoding, VC1, H264 etc. format supporting > > - Display enhancements, e.g. DP type is supported for virtual PORT > > - Display port capability virtualization: with this feature, dom0 manager could freely assign virtual DDI ports to VM, not necessary to check whether the corresponding physical DDI ports are available > > > > Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: > > > https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf > > > > The new source codes are available at the updated github repos: > > > Linux: https://github.com/01org/XenGT-Preview-kernel.git > > Xen: https://github.com/01org/XenGT-Preview-xen.git > > Qemu: https://github.com/01org/XenGT-Preview-qemu.git > > > More information about Intel GVT-g background, architecture, etc can be found at: > > > https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian > > http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf > > https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt > > > The previous update can be found here: > > > http://lists.xen.org/archives/html/xen-devel/2014-07/msg03248.html > > > Appreciate your comments! > > > -- > Thanks, > Jike > > On 07/25/2014 04:31 PM, Jike Song wrote: >> Hi all, >> >> We're pleased to announce an update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >> >> The news of this update: >> >> - Project code name is "XenGT", now official name is Intel Graphics Virtualization Technology (Intel GVT-g) >> - Currently Intel GVT-g supports Intel Processor Graphics built into 4th generation Intel Core processors - Haswell platform >> - Moving forward, XenGT will change to quarterly release cadence. Next update will be around early October, 2014. >> >> This update consists of: >> >> - Stability fixes, e.g. stable DP support >> - Display enhancements, e.g. virtual monitor support. Users can define a virtual monitor type with customized EDID for virtual machines, not necessarily the same as physical monitors. >> - Improved support for GPU recovery >> - Experimental Windows HVM support. To download the experimental version, see setup guide for details >> - Experimental Hardware Media Acceleration for decoding. >> >> >> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >> >> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >> >> >> The new source codes are available at the updated github repos: >> >> Linux: https://github.com/01org/XenGT-Preview-kernel.git >> Xen: https://github.com/01org/XenGT-Preview-xen.git >> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >> >> >> More information about Intel GVT-g background, architecture, etc can be found at: >> >> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >> >> The previous update can be found here: >> >> http://lists.xen.org/archives/html/xen-devel/2014-02/msg01848.html >> >> Appreciate your comments! >> >> >> >> >> -- >> Thanks, >> Jike >> ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <54AF967B.3060503@intel.com>]
* Re: [Intel-gfx] [Announcement] 2014-Q4 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <54AF967B.3060503@intel.com> @ 2015-01-12 3:04 ` Jike Song 2015-04-10 13:23 ` [Intel-gfx] [Announcement] 2015-Q1 " Jike Song [not found] ` <5527CEC4.9080700@intel.com> 2 siblings, 0 replies; 49+ messages in thread From: Jike Song @ 2015-01-12 3:04 UTC (permalink / raw) To: xen-devel, intel-gfx, linux-kernel Cc: Tian, Kevin, White, Michael L, Dong, Eddie, Li, Susie, Cowperthwaite, David J, Zhou, Chao, Haron, Sandra, Zhu, Libo, Wang, Hongbo Whoops. Changed the title from "2015-Q1" to be "2014-Q4" :) -- Thanks, Jike On 01/09/2015 04:51 PM, Jike Song wrote: > Hi all, > > We're pleased to announce a public update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. The XenGT project should be considered a work in progress, As such it i s not a complete product nor should it be considered one., Extra care should be taken when testing and configuring a system to use the XenGT project. > > The news of this update: > > - kernel update from 3.14.1 to drm-intel 3.17.0. > - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet. > - Next update will be around early Apr, 2015. > > This update consists of: > > - Including some bug fixes and stability enhancement. > - Making XenGT device model to be aware of Broadwell. In this version BDW is not yet functioning. > - Available Fence registers number is changed to 32 from 16 to align with HSW hardware. > - New cascade interrupt framework for supporting interrupt virtualization on both Haswell and Broadwell. > - Add back the gem_vgtbuffer. The previous release did not build that module for 3.14 kernel. In this release, the module is back and rebased to 3.17. > - Enable the irq based context switch in vgt driver, which will help reduce the cpu utilization while doing context switch, it is enabled by default, and can be turn off by kernel flag irq_based_ctx_switch. > > > Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: > > https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf > > The new source codes are available at the updated github repos: > > Linux: https://github.com/01org/XenGT-Preview-kernel.git > Xen: https://github.com/01org/XenGT-Preview-xen.git > Qemu: https://github.com/01org/XenGT-Preview-qemu.git > > > More information about Intel GVT-g background, architecture, etc can be found at: > > > https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian > http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf > https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt > > > > The previous update can be found here: > > > http://lists.xen.org/archives/html/xen-devel/2014-12/msg00474.html > > > > Appreciate your comments! > > > > -- > Thanks, > Jike > > > On 12/04/2014 10:45 AM, Jike Song wrote: >> Hi all, >> >> We're pleased to announce a public release to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >> >> >> The news of this update: >> >> >> - kernel update from 3.11.6 to 3.14.1 >> >> - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet >> >> - Next update will be around early Jan, 2015 >> >> >> This update consists of: >> >> - Windows HVM support with driver version 15.33.3910 >> >> - Stability fixes, e.g. stabilize GPU, the GPU hang occurrence rate becomes rare now >> >> - Hardware Media Acceleration for Decoding/Encoding/Transcoding, VC1, H264 etc. format supporting >> >> - Display enhancements, e.g. DP type is supported for virtual PORT >> >> - Display port capability virtualization: with this feature, dom0 manager could freely assign virtual DDI ports to VM, not necessary to check whether the corresponding physical DDI ports are available >> >> >> >> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >> >> >> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >> >> >> >> The new source codes are available at the updated github repos: >> >> >> Linux: https://github.com/01org/XenGT-Preview-kernel.git >> >> Xen: https://github.com/01org/XenGT-Preview-xen.git >> >> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >> >> >> More information about Intel GVT-g background, architecture, etc can be found at: >> >> >> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >> >> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >> >> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >> >> >> The previous update can be found here: >> >> >> http://lists.xen.org/archives/html/xen-devel/2014-07/msg03248.html >> >> >> Appreciate your comments! >> >> >> -- >> Thanks, >> Jike >> >> On 07/25/2014 04:31 PM, Jike Song wrote: >>> Hi all, >>> >>> We're pleased to announce an update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >>> >>> The news of this update: >>> >>> - Project code name is "XenGT", now official name is Intel Graphics Virtualization Technology (Intel GVT-g) >>> - Currently Intel GVT-g supports Intel Processor Graphics built into 4th generation Intel Core processors - Haswell platform >>> - Moving forward, XenGT will change to quarterly release cadence. Next update will be around early October, 2014. >>> >>> This update consists of: >>> >>> - Stability fixes, e.g. stable DP support >>> - Display enhancements, e.g. virtual monitor support. Users can define a virtual monitor type with customized EDID for virtual machines, not necessarily the same as physical monitors. >>> - Improved support for GPU recovery >>> - Experimental Windows HVM support. To download the experimental version, see setup guide for details >>> - Experimental Hardware Media Acceleration for decoding. >>> >>> >>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>> >>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >>> >>> >>> The new source codes are available at the updated github repos: >>> >>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>> >>> >>> More information about Intel GVT-g background, architecture, etc can be found at: >>> >>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>> >>> The previous update can be found here: >>> >>> http://lists.xen.org/archives/html/xen-devel/2014-02/msg01848.html >>> >>> Appreciate your comments! >>> >>> >>> >>> >>> -- >>> Thanks, >>> Jike >>> ^ permalink raw reply [flat|nested] 49+ messages in thread
* Re: [Intel-gfx] [Announcement] 2015-Q1 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <54AF967B.3060503@intel.com> 2015-01-12 3:04 ` [Intel-gfx] [Announcement] 2014-Q4 " Jike Song @ 2015-04-10 13:23 ` Jike Song [not found] ` <5527CEC4.9080700@intel.com> 2 siblings, 0 replies; 49+ messages in thread From: Jike Song @ 2015-04-10 13:23 UTC (permalink / raw) To: xen-devel, intel-gfx, linux-kernel Cc: Tian, Kevin, White, Michael L, Dong, Eddie, Li, Susie, Cowperthwaite, David J, Zhou, Chao, Haron, Sandra, Zhu, Libo, Wang, Hongbo Hi all, We're pleased to announce a public update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. Tip of repositories ------------------------- Kernel: a011c9f953e, Branch: master-2015Q1-3.18.0 Qemu: 2a75bbff62c1, Branch: master Xen: 38c36f0f511b1, Branch: master-2015Q1-4.5 Summary this update ------------------------- - Preliminary Broadwell support. - kernel update from drm-intel 3.17.0 to drm-intel 3.18.0(tag: drm-intel-next-fixes-2014-12-17, notice that i915 driver code is much newer than kernel stable version). - Next update will be around early July, 2015. - KVM support is still in a separate branch as prototype work. We plan to integrate KVM/Xen support together in future releases. This update consists of: - gvt-g core logic code was moved into i915 driver directory. - Host mediation is used for dom0 i915 driver access, instead of de-privileged dom0. - The Xen-specific code was separated from vgt core logic into a new file "driver/xen/xengt.c". - Broadwell is preliminarily supported in this release. Users could start multiple linux/windows 64-bit virtual machines simultaneously, and perform display switch among them. Notice that it is still preliminary release for BDW, which is not yet in the same level of HSW release. Differences include: * Power/performance tuning on BDW is not yet done. * Stability needs to be improved. * No 32-bit guest OS support. * Multi-monitor scenario is not fully tested, while single monitor of VGA/HDMI/DP/eDP should just work. Where to get: ----------------- kerenl: https://github.com/01org/XenGT-Preview-kernel.git Xen: https://github.com/01org/XenGT-Preview-xen.git Qemu: https://github.com/01org/XenGT-Preview-qemu.git Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: https://github.com/01org/XenGT-Preview-kernel/blob/master-2015Q1-3.18.0/XenGT_Setup_Guide_2015Q1.pdf More information about Intel GVT-g background, architecture, etc can be found at: https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt The previous update can be found here: http://lists.xen.org/archives/html/xen-devel/2014-12/msg00474.html Note --------------- The XenGT project should be considered a work in progress, As such it is not a complete product nor should it be considered one., Extra care should be taken when testing and configuring a system to use the XenGT project. -- Thanks, Jike On 01/09/2015 04:51 PM, Jike Song wrote: > Hi all, > > We're pleased to announce a public update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. The XenGT project should be considered a work in progress, As such it i s not a complete product nor should it be considered one., Extra care should be taken when testing and configuring a system to use the XenGT project. > > The news of this update: > > - kernel update from 3.14.1 to drm-intel 3.17.0. > - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet. > - Next update will be around early Apr, 2015. > > This update consists of: > > - Including some bug fixes and stability enhancement. > - Making XenGT device model to be aware of Broadwell. In this version BDW is not yet functioning. > - Available Fence registers number is changed to 32 from 16 to align with HSW hardware. > - New cascade interrupt framework for supporting interrupt virtualization on both Haswell and Broadwell. > - Add back the gem_vgtbuffer. The previous release did not build that module for 3.14 kernel. In this release, the module is back and rebased to 3.17. > - Enable the irq based context switch in vgt driver, which will help reduce the cpu utilization while doing context switch, it is enabled by default, and can be turn off by kernel flag irq_based_ctx_switch. > > > Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: > > https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf > > The new source codes are available at the updated github repos: > > Linux: https://github.com/01org/XenGT-Preview-kernel.git > Xen: https://github.com/01org/XenGT-Preview-xen.git > Qemu: https://github.com/01org/XenGT-Preview-qemu.git > > > More information about Intel GVT-g background, architecture, etc can be found at: > > > https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian > http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf > https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt > > > > The previous update can be found here: > > > http://lists.xen.org/archives/html/xen-devel/2014-12/msg00474.html > > > > Appreciate your comments! > > > > -- > Thanks, > Jike > > > On 12/04/2014 10:45 AM, Jike Song wrote: >> Hi all, >> >> We're pleased to announce a public release to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >> >> >> The news of this update: >> >> >> - kernel update from 3.11.6 to 3.14.1 >> >> - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet >> >> - Next update will be around early Jan, 2015 >> >> >> This update consists of: >> >> - Windows HVM support with driver version 15.33.3910 >> >> - Stability fixes, e.g. stabilize GPU, the GPU hang occurrence rate becomes rare now >> >> - Hardware Media Acceleration for Decoding/Encoding/Transcoding, VC1, H264 etc. format supporting >> >> - Display enhancements, e.g. DP type is supported for virtual PORT >> >> - Display port capability virtualization: with this feature, dom0 manager could freely assign virtual DDI ports to VM, not necessary to check whether the corresponding physical DDI ports are available >> >> >> >> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >> >> >> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >> >> >> >> The new source codes are available at the updated github repos: >> >> >> Linux: https://github.com/01org/XenGT-Preview-kernel.git >> >> Xen: https://github.com/01org/XenGT-Preview-xen.git >> >> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >> >> >> More information about Intel GVT-g background, architecture, etc can be found at: >> >> >> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >> >> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >> >> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >> >> >> The previous update can be found here: >> >> >> http://lists.xen.org/archives/html/xen-devel/2014-07/msg03248.html >> >> >> Appreciate your comments! >> >> >> -- >> Thanks, >> Jike >> >> On 07/25/2014 04:31 PM, Jike Song wrote: >>> Hi all, >>> >>> We're pleased to announce an update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >>> >>> The news of this update: >>> >>> - Project code name is "XenGT", now official name is Intel Graphics Virtualization Technology (Intel GVT-g) >>> - Currently Intel GVT-g supports Intel Processor Graphics built into 4th generation Intel Core processors - Haswell platform >>> - Moving forward, XenGT will change to quarterly release cadence. Next update will be around early October, 2014. >>> >>> This update consists of: >>> >>> - Stability fixes, e.g. stable DP support >>> - Display enhancements, e.g. virtual monitor support. Users can define a virtual monitor type with customized EDID for virtual machines, not necessarily the same as physical monitors. >>> - Improved support for GPU recovery >>> - Experimental Windows HVM support. To download the experimental version, see setup guide for details >>> - Experimental Hardware Media Acceleration for decoding. >>> >>> >>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>> >>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >>> >>> >>> The new source codes are available at the updated github repos: >>> >>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>> >>> >>> More information about Intel GVT-g background, architecture, etc can be found at: >>> >>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>> >>> The previous update can be found here: >>> >>> http://lists.xen.org/archives/html/xen-devel/2014-02/msg01848.html >>> >>> Appreciate your comments! >>> >>> >>> >>> >>> -- >>> Thanks, >>> Jike >>> ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <5527CEC4.9080700@intel.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q2 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <5527CEC4.9080700@intel.com> @ 2015-07-07 2:49 ` Jike Song [not found] ` <559B3E38.1080707@intel.com> 1 sibling, 0 replies; 49+ messages in thread From: Jike Song @ 2015-07-07 2:49 UTC (permalink / raw) To: xen-devel, intel-gfx, linux-kernel Cc: Tian, Kevin, Reddy, Raghuveer, White, Michael L, Dong, Eddie, Li, Susie, Cowperthwaite, David J, Zhou, Chao, Zhu, Libo, Wang, Hongbo, Zhiyuan Lv Hi all, We're pleased to announce a public update to Intel Graphics Virtualization Technology(Intel GVT-g, formerly known as XenGT). Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT); and the core logic can be easily ported to other hypervisors, for example, the experimental code has been released to support GVT-g running on a KVM hypervisor (a.k.a KVMGT). Tip of repositories ------------------------- Kernel: 5b73653d5ca, Branch: master-2015Q2-3.18.0 Qemu: 2a75bbff62c1, Branch: master Xen: 38c36f0f511b1, Branch: master-2015Q2-4.5 This update consists of: - Change time based scheduler timer to be configurable to enhance stability - Fix stability issues that VM/Dom0 got tdr when hang up at some specific instruction on BDW - Optimize the emulation of el_status register to enhance stability - 2D/3D performance in linux VMs has been improved about 50% on BDW - Fix abnormal idle power consumption issue due to wrong forcewake policy - Fix tdr issue when running 2D/3D/Media workloads in Windows VMs simultaneously - KVM support is still in a separate branch as prototype work. We plan to integrate KVM/Xen support together in the future releases - Next update will be around early Oct, 2015 Notice that this release can support both Intel 4th generation Core CPU(code name: Haswell) and Intel 5th generation Core CPU (code name: Broadwell), while the limitation of the latter include: * 3D conformance may have some failure * Under high demand 3D workloads, stability issues are detected * Multi-monitor scenario is not fully tested, while single monitor of VGA/HDMI/DP/eDP should just work * Hotplug DP may cause black screen even on native environment Where to get kernel: https://github.com/01org/XenGT-Preview-kernel.git xen: https://github.com/01org/XenGT-Preview-xen.git qemu: https://github.com/01org/XenGT-Preview-qemu.git We have a mailing list for GVT-g development, bug report and technical discussion: https://lists.01.org/mailman/listinfo/igvt-g More information about Intel GVT-g background, architecture, etc can be found at: https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt Note: The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. -- Thanks, Jike On 04/10/2015 09:23 PM, Jike Song wrote: > Hi all, > > We're pleased to announce a public update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. > > Tip of repositories > ------------------------- > > Kernel: a011c9f953e, Branch: master-2015Q1-3.18.0 > Qemu: 2a75bbff62c1, Branch: master > Xen: 38c36f0f511b1, Branch: master-2015Q1-4.5 > > Summary this update > ------------------------- > - Preliminary Broadwell support. > - kernel update from drm-intel 3.17.0 to drm-intel 3.18.0(tag: drm-intel-next-fixes-2014-12-17, notice that i915 driver code is much newer than kernel stable version). > - Next update will be around early July, 2015. > - KVM support is still in a separate branch as prototype work. We plan to integrate KVM/Xen support together in future releases. > > This update consists of: > - gvt-g core logic code was moved into i915 driver directory. > - Host mediation is used for dom0 i915 driver access, instead of de-privileged dom0. > - The Xen-specific code was separated from vgt core logic into a new file "driver/xen/xengt.c". > - Broadwell is preliminarily supported in this release. Users could start multiple linux/windows 64-bit virtual machines simultaneously, and perform display switch among them. > > Notice that it is still preliminary release for BDW, which is not yet in the same level of HSW release. Differences include: > * Power/performance tuning on BDW is not yet done. > * Stability needs to be improved. > * No 32-bit guest OS support. > * Multi-monitor scenario is not fully tested, while single monitor of VGA/HDMI/DP/eDP should just work. > > > Where to get: > ----------------- > kerenl: https://github.com/01org/XenGT-Preview-kernel.git > Xen: https://github.com/01org/XenGT-Preview-xen.git > Qemu: https://github.com/01org/XenGT-Preview-qemu.git > > Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: > https://github.com/01org/XenGT-Preview-kernel/blob/master-2015Q1-3.18.0/XenGT_Setup_Guide_2015Q1.pdf > > More information about Intel GVT-g background, architecture, etc can be found at: > https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian > http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf > https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt > > The previous update can be found here: > http://lists.xen.org/archives/html/xen-devel/2014-12/msg00474.html > > > Note > --------------- > The XenGT project should be considered a work in progress, As such it is not a complete product nor should it be considered one., Extra care should be taken when testing and configuring a system to use the XenGT project. > > > -- > Thanks, > Jike > > On 01/09/2015 04:51 PM, Jike Song wrote: >> Hi all, >> >> We're pleased to announce a public update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. The XenGT project should be considered a work in progress, As such it is not a complete product nor should it be considered one., Extra care should be taken when testing and configuring a system to use the XenGT project. >> >> The news of this update: >> >> - kernel update from 3.14.1 to drm-intel 3.17.0. >> - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet. >> - Next update will be around early Apr, 2015. >> >> This update consists of: >> >> - Including some bug fixes and stability enhancement. >> - Making XenGT device model to be aware of Broadwell. In this version BDW is not yet functioning. >> - Available Fence registers number is changed to 32 from 16 to align with HSW hardware. >> - New cascade interrupt framework for supporting interrupt virtualization on both Haswell and Broadwell. >> - Add back the gem_vgtbuffer. The previous release did not build that module for 3.14 kernel. In this release, the module is back and rebased to 3.17. >> - Enable the irq based context switch in vgt driver, which will help reduce the cpu utilization while doing context switch, it is enabled by default, and can be turn off by kernel flag irq_based_ctx_switch. >> >> >> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >> >> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >> >> The new source codes are available at the updated github repos: >> >> Linux: https://github.com/01org/XenGT-Preview-kernel.git >> Xen: https://github.com/01org/XenGT-Preview-xen.git >> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >> >> >> More information about Intel GVT-g background, architecture, etc can be found at: >> >> >> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >> >> >> >> The previous update can be found here: >> >> >> http://lists.xen.org/archives/html/xen-devel/2014-12/msg00474.html >> >> >> >> Appreciate your comments! >> >> >> >> -- >> Thanks, >> Jike >> >> >> On 12/04/2014 10:45 AM, Jike Song wrote: >>> Hi all, >>> >>> We're pleased to announce a public release to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >>> >>> >>> The news of this update: >>> >>> >>> - kernel update from 3.11.6 to 3.14.1 >>> >>> - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet >>> >>> - Next update will be around early Jan, 2015 >>> >>> >>> This update consists of: >>> >>> - Windows HVM support with driver version 15.33.3910 >>> >>> - Stability fixes, e.g. stabilize GPU, the GPU hang occurrence rate becomes rare now >>> >>> - Hardware Media Acceleration for Decoding/Encoding/Transcoding, VC1, H264 etc. format supporting >>> >>> - Display enhancements, e.g. DP type is supported for virtual PORT >>> >>> - Display port capability virtualization: with this feature, dom0 manager could freely assign virtual DDI ports to VM, not necessary to check whether the corresponding physical DDI ports are available >>> >>> >>> >>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>> >>> >>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >>> >>> >>> >>> The new source codes are available at the updated github repos: >>> >>> >>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>> >>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>> >>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>> >>> >>> More information about Intel GVT-g background, architecture, etc can be found at: >>> >>> >>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>> >>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>> >>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>> >>> >>> The previous update can be found here: >>> >>> >>> http://lists.xen.org/archives/html/xen-devel/2014-07/msg03248.html >>> >>> >>> Appreciate your comments! >>> >>> >>> -- >>> Thanks, >>> Jike >>> >>> On 07/25/2014 04:31 PM, Jike Song wrote: >>>> Hi all, >>>> >>>> We're pleased to announce an update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >>>> >>>> The news of this update: >>>> >>>> - Project code name is "XenGT", now official name is Intel Graphics Virtualization Technology (Intel GVT-g) >>>> - Currently Intel GVT-g supports Intel Processor Graphics built into 4th generation Intel Core processors - Haswell platform >>>> - Moving forward, XenGT will change to quarterly release cadence. Next update will be around early October, 2014. >>>> >>>> This update consists of: >>>> >>>> - Stability fixes, e.g. stable DP support >>>> - Display enhancements, e.g. virtual monitor support. Users can define a virtual monitor type with customized EDID for virtual machines, not necessarily the same as physical monitors. >>>> - Improved support for GPU recovery >>>> - Experimental Windows HVM support. To download the experimental version, see setup guide for details >>>> - Experimental Hardware Media Acceleration for decoding. >>>> >>>> >>>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>>> >>>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >>>> >>>> >>>> The new source codes are available at the updated github repos: >>>> >>>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>> >>>> >>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>> >>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>> >>>> The previous update can be found here: >>>> >>>> http://lists.xen.org/archives/html/xen-devel/2014-02/msg01848.html >>>> >>>> Appreciate your comments! >>>> >>>> >>>> >>>> >>>> -- >>>> Thanks, >>>> Jike >>>> ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <559B3E38.1080707@intel.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <559B3E38.1080707@intel.com> @ 2015-10-27 9:25 ` Jike Song [not found] ` <562F4311.9@intel.com> 1 sibling, 0 replies; 49+ messages in thread From: Jike Song @ 2015-10-27 9:25 UTC (permalink / raw) To: xen-devel, igvt-g, intel-gfx, linux-kernel Cc: Tian, Kevin, Reddy, Raghuveer, White, Michael L, Dong, Eddie, Li, Susie, Cowperthwaite, David J, Zhou, Chao, Zhu, Libo, Wang, Hongbo, Zhiyuan Lv Hi all, We are pleased to announce another update of Intel GVT-g for Xen. Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT); and the core logic can be easily ported to other hypervisors. Repositories Kernel: https://github.com/01org/igvtg-kernel (2015q3-3.18.0 branch) Xen: https://github.com/01org/igvtg-xen (2015q3-4.5 branch) Qemu: https://github.com/01org/igvtg-qemu (xengt_public2015q3 branch) This update consists of: - XenGT is now merged with KVMGT in unified repositories(kernel and qemu), but currently different branches for qemu. XenGT and KVMGT share same iGVT-g core logic. - fix sysfs/debugfs access seldom crash issue - fix a BUG in XenGT I/O emulation logic - improve 3d workload stability Next update will be around early Jan, 2016. Known issues: - At least 2GB memory is suggested for VM to run most 3D workloads. - Keymap might be incorrect in guest. Config file may need to explicitly specify "keymap='en-us'". Although it looks like the default value, earlier we saw the problem of wrong keymap code if it is not explicitly set. - When using three monitors, doing hotplug between Guest pause/unpause may not be able to lightup all monitors automatically. Some specific monitor issues. - Cannot move mouse pointer smoothly in guest by default launched by VNC mode. Configuration file need to explicitly specify "usb=1" to enable a USB bus, and "usbdevice='tablet'" to add pointer device using absolute coordinates. - Resume dom0 from S3 may cause some error message. - i915 unload/reload cannot works well with less than 3 vcpu when upowerd service was running - Unigen Tropics running in multiple guests will cause dom0 and guests tdr. Please subscribe the mailing list to report BUGs, discuss, and/or contribute: https://lists.01.org/mailman/listinfo/igvt-g More information about Intel GVT-g background, architecture, etc can be found at(may not be up-to-date): https://01.org/igvt-g https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-REWRITE%203RD%20v4.pdf https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt Note: The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. -- Thanks, Jike On 07/07/2015 10:49 AM, Jike Song wrote: > Hi all, > > We're pleased to announce a public update to Intel Graphics Virtualization Technology(Intel GVT-g, formerly known as XenGT). > > Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT); and the core logic can be easily ported to other hypervisors, for example, the experimental code has been released to support GVT-g running on a KVM hypervisor (a.k.a KVMGT). > > Tip of repositories > ------------------------- > > Kernel: 5b73653d5ca, Branch: master-2015Q2-3.18.0 > Qemu: 2a75bbff62c1, Branch: master > Xen: 38c36f0f511b1, Branch: master-2015Q2-4.5 > > This update consists of: > - Change time based scheduler timer to be configurable to enhance stability > - Fix stability issues that VM/Dom0 got tdr when hang up at some specific instruction on BDW > - Optimize the emulation of el_status register to enhance stability > - 2D/3D performance in linux VMs has been improved about 50% on BDW > - Fix abnormal idle power consumption issue due to wrong forcewake policy > - Fix tdr issue when running 2D/3D/Media workloads in Windows VMs simultaneously > - KVM support is still in a separate branch as prototype work. We plan to integrate KVM/Xen support together in the future releases > - Next update will be around early Oct, 2015 > > Notice that this release can support both Intel 4th generation Core CPU(code name: Haswell) and Intel 5th generation Core CPU (code name: Broadwell), while the limitation of the latter include: > * 3D conformance may have some failure > * Under high demand 3D workloads, stability issues are detected > * Multi-monitor scenario is not fully tested, while single monitor of VGA/HDMI/DP/eDP should just work > * Hotplug DP may cause black screen even on native environment > > Where to get > > kernel: https://github.com/01org/XenGT-Preview-kernel.git > xen: https://github.com/01org/XenGT-Preview-xen.git > qemu: https://github.com/01org/XenGT-Preview-qemu.git > > > We have a mailing list for GVT-g development, bug report and technical discussion: > > https://lists.01.org/mailman/listinfo/igvt-g > > More information about Intel GVT-g background, architecture, etc can be found at: > > https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian > http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf > https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt > > > Note: The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. > > > -- > Thanks, > Jike > > On 04/10/2015 09:23 PM, Jike Song wrote: >> Hi all, >> >> We're pleased to announce a public update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >> >> Tip of repositories >> ------------------------- >> >> Kernel: a011c9f953e, Branch: master-2015Q1-3.18.0 >> Qemu: 2a75bbff62c1, Branch: master >> Xen: 38c36f0f511b1, Branch: master-2015Q1-4.5 >> >> Summary this update >> ------------------------- >> - Preliminary Broadwell support. >> - kernel update from drm-intel 3.17.0 to drm-intel 3.18.0(tag: drm-intel-next-fixes-2014-12-17, notice that i915 driver code is much newer than kernel stable version). >> - Next update will be around early July, 2015. >> - KVM support is still in a separate branch as prototype work. We plan to integrate KVM/Xen support together in future releases. >> >> This update consists of: >> - gvt-g core logic code was moved into i915 driver directory. >> - Host mediation is used for dom0 i915 driver access, instead of de-privileged dom0. >> - The Xen-specific code was separated from vgt core logic into a new file "driver/xen/xengt.c". >> - Broadwell is preliminarily supported in this release. Users could start multiple linux/windows 64-bit virtual machines simultaneously, and perform display switch among them. >> >> Notice that it is still preliminary release for BDW, which is not yet in the same level of HSW release. Differences include: >> * Power/performance tuning on BDW is not yet done. >> * Stability needs to be improved. >> * No 32-bit guest OS support. >> * Multi-monitor scenario is not fully tested, while single monitor of VGA/HDMI/DP/eDP should just work. >> >> >> Where to get: >> ----------------- >> kerenl: https://github.com/01org/XenGT-Preview-kernel.git >> Xen: https://github.com/01org/XenGT-Preview-xen.git >> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >> >> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >> https://github.com/01org/XenGT-Preview-kernel/blob/master-2015Q1-3.18.0/XenGT_Setup_Guide_2015Q1.pdf >> >> More information about Intel GVT-g background, architecture, etc can be found at: >> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >> >> The previous update can be found here: >> http://lists.xen.org/archives/html/xen-devel/2014-12/msg00474.html >> >> >> Note >> --------------- >> The XenGT project should be considered a work in progress, As such it is not a complete product nor should it be considered one., Extra care should be taken when testing and configuring a system to use the XenGT project. >> >> >> -- >> Thanks, >> Jike >> >> On 01/09/2015 04:51 PM, Jike Song wrote: >>> Hi all, >>> >>> We're pleased to announce a public update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. The XenGT project should be considered a work in progress, As such it is not a complete product nor should it be considered one., Extra care should be taken when testing and configuring a system to use the XenGT project. >>> >>> The news of this update: >>> >>> - kernel update from 3.14.1 to drm-intel 3.17.0. >>> - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet. >>> - Next update will be around early Apr, 2015. >>> >>> This update consists of: >>> >>> - Including some bug fixes and stability enhancement. >>> - Making XenGT device model to be aware of Broadwell. In this version BDW is not yet functioning. >>> - Available Fence registers number is changed to 32 from 16 to align with HSW hardware. >>> - New cascade interrupt framework for supporting interrupt virtualization on both Haswell and Broadwell. >>> - Add back the gem_vgtbuffer. The previous release did not build that module for 3.14 kernel. In this release, the module is back and rebased to 3.17. >>> - Enable the irq based context switch in vgt driver, which will help reduce the cpu utilization while doing context switch, it is enabled by default, and can be turn off by kernel flag irq_based_ctx_switch. >>> >>> >>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>> >>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >>> >>> The new source codes are available at the updated github repos: >>> >>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>> >>> >>> More information about Intel GVT-g background, architecture, etc can be found at: >>> >>> >>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>> >>> >>> >>> The previous update can be found here: >>> >>> >>> http://lists.xen.org/archives/html/xen-devel/2014-12/msg00474.html >>> >>> >>> >>> Appreciate your comments! >>> >>> >>> >>> -- >>> Thanks, >>> Jike >>> >>> >>> On 12/04/2014 10:45 AM, Jike Song wrote: >>>> Hi all, >>>> >>>> We're pleased to announce a public release to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >>>> >>>> >>>> The news of this update: >>>> >>>> >>>> - kernel update from 3.11.6 to 3.14.1 >>>> >>>> - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet >>>> >>>> - Next update will be around early Jan, 2015 >>>> >>>> >>>> This update consists of: >>>> >>>> - Windows HVM support with driver version 15.33.3910 >>>> >>>> - Stability fixes, e.g. stabilize GPU, the GPU hang occurrence rate becomes rare now >>>> >>>> - Hardware Media Acceleration for Decoding/Encoding/Transcoding, VC1, H264 etc. format supporting >>>> >>>> - Display enhancements, e.g. DP type is supported for virtual PORT >>>> >>>> - Display port capability virtualization: with this feature, dom0 manager could freely assign virtual DDI ports to VM, not necessary to check whether the corresponding physical DDI ports are available >>>> >>>> >>>> >>>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>>> >>>> >>>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >>>> >>>> >>>> >>>> The new source codes are available at the updated github repos: >>>> >>>> >>>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>>> >>>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>>> >>>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>> >>>> >>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>> >>>> >>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>> >>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>> >>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>> >>>> >>>> The previous update can be found here: >>>> >>>> >>>> http://lists.xen.org/archives/html/xen-devel/2014-07/msg03248.html >>>> >>>> >>>> Appreciate your comments! >>>> >>>> >>>> -- >>>> Thanks, >>>> Jike >>>> >>>> On 07/25/2014 04:31 PM, Jike Song wrote: >>>>> Hi all, >>>>> >>>>> We're pleased to announce an update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >>>>> >>>>> The news of this update: >>>>> >>>>> - Project code name is "XenGT", now official name is Intel Graphics Virtualization Technology (Intel GVT-g) >>>>> - Currently Intel GVT-g supports Intel Processor Graphics built into 4th generation Intel Core processors - Haswell platform >>>>> - Moving forward, XenGT will change to quarterly release cadence. Next update will be around early October, 2014. >>>>> >>>>> This update consists of: >>>>> >>>>> - Stability fixes, e.g. stable DP support >>>>> - Display enhancements, e.g. virtual monitor support. Users can define a virtual monitor type with customized EDID for virtual machines, not necessarily the same as physical monitors. >>>>> - Improved support for GPU recovery >>>>> - Experimental Windows HVM support. To download the experimental version, see setup guide for details >>>>> - Experimental Hardware Media Acceleration for decoding. >>>>> >>>>> >>>>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>>>> >>>>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >>>>> >>>>> >>>>> The new source codes are available at the updated github repos: >>>>> >>>>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>>>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>>>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>>> >>>>> >>>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>>> >>>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>>> >>>>> The previous update can be found here: >>>>> >>>>> http://lists.xen.org/archives/html/xen-devel/2014-02/msg01848.html >>>>> >>>>> Appreciate your comments! >>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Thanks, >>>>> Jike >>>>> ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <562F4311.9@intel.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <562F4311.9@intel.com> @ 2015-11-18 18:12 ` Alex Williamson [not found] ` <1447870341.4697.92.camel@redhat.com> ` (2 subsequent siblings) 3 siblings, 0 replies; 49+ messages in thread From: Alex Williamson @ 2015-11-18 18:12 UTC (permalink / raw) To: Jike Song Cc: igvt-g, Tian, Kevin, Reddy, Raghuveer, qemu-devel, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Gerd Hoffmann, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Zhiyuan Lv [cc +qemu-devel, +paolo, +gerd] On Tue, 2015-10-27 at 17:25 +0800, Jike Song wrote: > Hi all, > > We are pleased to announce another update of Intel GVT-g for Xen. > > Intel GVT-g is a full GPU virtualization solution with mediated > pass-through, starting from 4th generation Intel Core(TM) processors > with Intel Graphics processors. A virtual GPU instance is maintained > for each VM, with part of performance critical resources directly > assigned. The capability of running native graphics driver inside a > VM, without hypervisor intervention in performance critical paths, > achieves a good balance among performance, feature, and sharing > capability. Xen is currently supported on Intel Processor Graphics > (a.k.a. XenGT); and the core logic can be easily ported to other > hypervisors. > > > Repositories > > Kernel: https://github.com/01org/igvtg-kernel (2015q3-3.18.0 branch) > Xen: https://github.com/01org/igvtg-xen (2015q3-4.5 branch) > Qemu: https://github.com/01org/igvtg-qemu (xengt_public2015q3 branch) > > > This update consists of: > > - XenGT is now merged with KVMGT in unified repositories(kernel and qemu), but currently > different branches for qemu. XenGT and KVMGT share same iGVT-g core logic. Hi! At redhat we've been thinking about how to support vGPUs from multiple vendors in a common way within QEMU. We want to enable code sharing between vendors and give new vendors an easy path to add their own support. We also have the complication that not all vGPU vendors are as open source friendly as Intel, so being able to abstract the device mediation and access outside of QEMU is a big advantage. The proposal I'd like to make is that a vGPU, whether it is from Intel or another vendor, is predominantly a PCI(e) device. We have an interface in QEMU already for exposing arbitrary PCI devices, vfio-pci. Currently vfio-pci uses the VFIO API to interact with "physical" devices and system IOMMUs. I highlight /physical/ there because some of these physical devices are SR-IOV VFs, which is somewhat of a fuzzy concept, somewhere between fixed hardware and a virtual device implemented in software. That software just happens to be running on the physical endpoint. vGPUs are similar, with the virtual device created at a different point, host software. They also rely on different IOMMU constructs, making use of the MMU capabilities of the GPU (GTTs and such), but really having similar requirements. The proposal is therefore that GPU vendors can expose vGPUs to userspace, and thus to QEMU, using the VFIO API. For instance, vfio supports modular bus drivers and IOMMU drivers. An intel-vfio-gvt-d module (or extension of i915) can register as a vfio bus driver, create a struct device per vGPU, create an IOMMU group for that device, and register that device with the vfio-core. Since we don't rely on the system IOMMU for GVT-d vGPU assignment, another vGPU vendor driver (or extension of the same module) can register a "type1" compliant IOMMU driver into vfio-core. From the perspective of QEMU then, all of the existing vfio-pci code is re-used, QEMU remains largely unaware of any specifics of the vGPU being assigned, and the only necessary change so far is how QEMU traverses sysfs to find the device and thus the IOMMU group leading to the vfio group. There are a few areas where we know we'll need to extend the VFIO API to make this work, but it seems like they can all be done generically. One is that PCI BARs are described through the VFIO API as regions and each region has a single flag describing whether mmap (ie. direct mapping) of that region is possible. We expect that vGPUs likely need finer granularity, enabling some areas within a BAR to be trapped and fowarded as a read or write access for the vGPU-vfio-device module to emulate, while other regions, like framebuffers or texture regions, are directly mapped. I have prototype code to enable this already. Another area is that we really don't want to proliferate each vGPU needing a new IOMMU type within vfio. The existing type1 IOMMU provides potentially the most simple mapping and unmapping interface possible. We'd therefore need to allow multiple "type1" IOMMU drivers for vfio, making type1 be more of an interface specification rather than a single implementation. This is a trivial change to make within vfio and one that I believe is compatible with the existing API. Note that implementing a type1-compliant vfio IOMMU does not imply pinning an mapping every registered page. A vGPU, with mediated device access, may use this only to track the current HVA to GPA mappings for a VM. Only when a DMA is enabled for the vGPU instance is that HVA pinned and an HPA to GPA translation programmed into the GPU MMU. Another area of extension is how to expose a framebuffer to QEMU for seamless integration into a SPICE/VNC channel. For this I believe we could use a new region, much like we've done to expose VGA access through a vfio device file descriptor. An area within this new framebuffer region could be directly mappable in QEMU while a non-mappable page, at a standard location with standardized format, provides a description of framebuffer and potentially even a communication channel to synchronize framebuffer captures. This would be new code for QEMU, but something we could share among all vGPU implementations. Another obvious area to be standardized would be how to discover, create, and destroy vGPU instances. SR-IOV has a standard mechanism to create VFs in sysfs and I would propose that vGPU vendors try to standardize on similar interfaces to enable libvirt to easily discover the vGPU capabilities of a given GPU and manage the lifecycle of a vGPU instance. This is obviously a lot to digest, but I'd certainly be interested in hearing feedback on this proposal as well as try to clarify anything I've left out or misrepresented above. Another benefit to this mechanism is that direct GPU assignment and vGPU assignment use the same code within QEMU and same API to the kernel, which should make debugging and code support between the two easier. I'd really like to start a discussion around this proposal, and of course the first open source implementation of this sort of model will really help to drive the direction it takes. Thanks! Alex ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <1447870341.4697.92.camel@redhat.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <1447870341.4697.92.camel@redhat.com> @ 2015-11-19 4:06 ` Tian, Kevin [not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F7152DB@SHSMSX101.ccr.corp.intel.com> 1 sibling, 0 replies; 49+ messages in thread From: Tian, Kevin @ 2015-11-19 4:06 UTC (permalink / raw) To: Alex Williamson Cc: igvt-g, qemu-devel, Reddy, Raghuveer, Gerd Hoffmann, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Song, Jike, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan > From: Alex Williamson [mailto:alex.williamson@redhat.com] > Sent: Thursday, November 19, 2015 2:12 AM > > [cc +qemu-devel, +paolo, +gerd] > > On Tue, 2015-10-27 at 17:25 +0800, Jike Song wrote: > > Hi all, > > > > We are pleased to announce another update of Intel GVT-g for Xen. > > > > Intel GVT-g is a full GPU virtualization solution with mediated > > pass-through, starting from 4th generation Intel Core(TM) processors > > with Intel Graphics processors. A virtual GPU instance is maintained > > for each VM, with part of performance critical resources directly > > assigned. The capability of running native graphics driver inside a > > VM, without hypervisor intervention in performance critical paths, > > achieves a good balance among performance, feature, and sharing > > capability. Xen is currently supported on Intel Processor Graphics > > (a.k.a. XenGT); and the core logic can be easily ported to other > > hypervisors. > > > > > > Repositories > > > > Kernel: https://github.com/01org/igvtg-kernel (2015q3-3.18.0 branch) > > Xen: https://github.com/01org/igvtg-xen (2015q3-4.5 branch) > > Qemu: https://github.com/01org/igvtg-qemu (xengt_public2015q3 branch) > > > > > > This update consists of: > > > > - XenGT is now merged with KVMGT in unified repositories(kernel and qemu), but > currently > > different branches for qemu. XenGT and KVMGT share same iGVT-g core logic. > > Hi! > > At redhat we've been thinking about how to support vGPUs from multiple > vendors in a common way within QEMU. We want to enable code sharing > between vendors and give new vendors an easy path to add their own > support. We also have the complication that not all vGPU vendors are as > open source friendly as Intel, so being able to abstract the device > mediation and access outside of QEMU is a big advantage. > > The proposal I'd like to make is that a vGPU, whether it is from Intel > or another vendor, is predominantly a PCI(e) device. We have an > interface in QEMU already for exposing arbitrary PCI devices, vfio-pci. > Currently vfio-pci uses the VFIO API to interact with "physical" devices > and system IOMMUs. I highlight /physical/ there because some of these > physical devices are SR-IOV VFs, which is somewhat of a fuzzy concept, > somewhere between fixed hardware and a virtual device implemented in > software. That software just happens to be running on the physical > endpoint. Agree. One clarification for rest discussion, is that we're talking about GVT-g vGPU here which is a pure software GPU virtualization technique. GVT-d (note some use in the text) refers to passing through the whole GPU or a specific VF. GVT-d already falls into existing VFIO APIs nicely (though some on-going effort to remove Intel specific platform stickness from gfx driver). :-) > > vGPUs are similar, with the virtual device created at a different point, > host software. They also rely on different IOMMU constructs, making use > of the MMU capabilities of the GPU (GTTs and such), but really having > similar requirements. One important difference between system IOMMU and GPU-MMU here. System IOMMU is very much about translation from a DMA target (IOVA on native, or GPA in virtualization case) to HPA. However GPU internal MMUs is to translate from Graphics Memory Address (GMA) to DMA target (HPA if system IOMMU is disabled, or IOVA/GPA if system IOMMU is enabled). GMA is an internal addr space within GPU, not exposed to Qemu and fully managed by GVT-g device model. Since it's not a standard PCI defined resource, we don't need abstract this capability in VFIO interface. > > The proposal is therefore that GPU vendors can expose vGPUs to > userspace, and thus to QEMU, using the VFIO API. For instance, vfio > supports modular bus drivers and IOMMU drivers. An intel-vfio-gvt-d > module (or extension of i915) can register as a vfio bus driver, create > a struct device per vGPU, create an IOMMU group for that device, and > register that device with the vfio-core. Since we don't rely on the > system IOMMU for GVT-d vGPU assignment, another vGPU vendor driver (or > extension of the same module) can register a "type1" compliant IOMMU > driver into vfio-core. From the perspective of QEMU then, all of the > existing vfio-pci code is re-used, QEMU remains largely unaware of any > specifics of the vGPU being assigned, and the only necessary change so > far is how QEMU traverses sysfs to find the device and thus the IOMMU > group leading to the vfio group. GVT-g requires to pin guest memory and query GPA->HPA information, upon which shadow GTTs will be updated accordingly from (GMA->GPA) to (GMA->HPA). So yes, here a dummy or simple "type1" compliant IOMMU can be introduced just for this requirement. However there's one tricky point which I'm not sure whether overall VFIO concept will be violated. GVT-g doesn't require system IOMMU to function, however host system may enable system IOMMU just for hardening purpose. This means two-level translations existing (GMA-> IOVA->HPA), so the dummy IOMMU driver has to request system IOMMU driver to allocate IOVA for VMs and then setup IOVA->HPA mapping in IOMMU page table. In this case, multiple VM's translations are multiplexed in one IOMMU page table. We might need create some group/sub-group or parent/child concepts among those IOMMUs for thorough permission control. > > There are a few areas where we know we'll need to extend the VFIO API to > make this work, but it seems like they can all be done generically. One > is that PCI BARs are described through the VFIO API as regions and each > region has a single flag describing whether mmap (ie. direct mapping) of > that region is possible. We expect that vGPUs likely need finer > granularity, enabling some areas within a BAR to be trapped and fowarded > as a read or write access for the vGPU-vfio-device module to emulate, > while other regions, like framebuffers or texture regions, are directly > mapped. I have prototype code to enable this already. Yes in GVT-g one BAR resource might be partitioned among multiple vGPUs. If VFIO can support such partial resource assignment, it'd be great. Similar parent/child concept might also be required here, so any resource enumerated on a vGPU shouldn't break limitations enforced on the physical device. One unique requirement for GVT-g here, though, is that vGPU device model need to know guest BAR configuration for proper emulation (e.g. register IO emulation handler to KVM). Similar is about guest MSI vector for virtual interrupt injection. Not sure how this can be fit into common VFIO model. Does VFIO allow vendor specific extension today? > > Another area is that we really don't want to proliferate each vGPU > needing a new IOMMU type within vfio. The existing type1 IOMMU provides > potentially the most simple mapping and unmapping interface possible. > We'd therefore need to allow multiple "type1" IOMMU drivers for vfio, > making type1 be more of an interface specification rather than a single > implementation. This is a trivial change to make within vfio and one > that I believe is compatible with the existing API. Note that > implementing a type1-compliant vfio IOMMU does not imply pinning an > mapping every registered page. A vGPU, with mediated device access, may > use this only to track the current HVA to GPA mappings for a VM. Only > when a DMA is enabled for the vGPU instance is that HVA pinned and an > HPA to GPA translation programmed into the GPU MMU. > > Another area of extension is how to expose a framebuffer to QEMU for > seamless integration into a SPICE/VNC channel. For this I believe we > could use a new region, much like we've done to expose VGA access > through a vfio device file descriptor. An area within this new > framebuffer region could be directly mappable in QEMU while a > non-mappable page, at a standard location with standardized format, > provides a description of framebuffer and potentially even a > communication channel to synchronize framebuffer captures. This would > be new code for QEMU, but something we could share among all vGPU > implementations. Now GVT-g already provides an interface to decode framebuffer information, w/ an assumption that the framebuffer will be further composited into OpenGL APIs. So the format is defined according to OpenGL definition. Does that meet SPICE requirement? Another thing to be added. Framebuffers are frequently switched in reality. So either Qemu needs to poll or a notification mechanism is required. And since it's dynamic, having framebuffer page directly exposed in the new region might be tricky. We can just expose framebuffer information (including base, format, etc.) and let Qemu to map separately out of VFIO interface. And... this works fine with vGPU model since software knows all the detail about framebuffer. However in pass-through case, who do you expect to provide that information? Is it OK to introduce vGPU specific APIs in VFIO? > > Another obvious area to be standardized would be how to discover, > create, and destroy vGPU instances. SR-IOV has a standard mechanism to > create VFs in sysfs and I would propose that vGPU vendors try to > standardize on similar interfaces to enable libvirt to easily discover > the vGPU capabilities of a given GPU and manage the lifecycle of a vGPU > instance. Now there is no standard. We expose vGPU life-cycle mgmt. APIs through sysfs (under i915 node), which is very Intel specific. In reality different vendors have quite different capabilities for their own vGPUs, so not sure how standard we can define such a mechanism. But this code should be minor to be maintained in libvirt. > > This is obviously a lot to digest, but I'd certainly be interested in > hearing feedback on this proposal as well as try to clarify anything > I've left out or misrepresented above. Another benefit to this > mechanism is that direct GPU assignment and vGPU assignment use the same > code within QEMU and same API to the kernel, which should make debugging > and code support between the two easier. I'd really like to start a > discussion around this proposal, and of course the first open source > implementation of this sort of model will really help to drive the > direction it takes. Thanks! > Thanks for starting this discussion. Intel will definitely work with community on this work. Based on earlier comments, I'm not sure whether we can exactly same code for direct GPU assignment and vGPU assignment, since even we extend VFIO some interfaces might be vGPU specific. Does this way still achieve your end goal? Thanks Kevin ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <AADFC41AFE54684AB9EE6CBC0274A5D15F7152DB@SHSMSX101.ccr.corp.intel.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F7152DB@SHSMSX101.ccr.corp.intel.com> @ 2015-11-19 7:22 ` Jike Song 2015-11-19 8:40 ` Gerd Hoffmann ` (4 subsequent siblings) 5 siblings, 0 replies; 49+ messages in thread From: Jike Song @ 2015-11-19 7:22 UTC (permalink / raw) To: Alex Williamson Cc: igvt-g, Tian, Kevin, Reddy, Raghuveer, qemu-devel, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Gerd Hoffmann, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan Hi Alex, On 11/19/2015 12:06 PM, Tian, Kevin wrote: >> From: Alex Williamson [mailto:alex.williamson@redhat.com] >> Sent: Thursday, November 19, 2015 2:12 AM >> >> [cc +qemu-devel, +paolo, +gerd] >> >> On Tue, 2015-10-27 at 17:25 +0800, Jike Song wrote: >>> {snip} >> >> Hi! >> >> At redhat we've been thinking about how to support vGPUs from multiple >> vendors in a common way within QEMU. We want to enable code sharing >> between vendors and give new vendors an easy path to add their own >> support. We also have the complication that not all vGPU vendors are as >> open source friendly as Intel, so being able to abstract the device >> mediation and access outside of QEMU is a big advantage. >> >> The proposal I'd like to make is that a vGPU, whether it is from Intel >> or another vendor, is predominantly a PCI(e) device. We have an >> interface in QEMU already for exposing arbitrary PCI devices, vfio-pci. >> Currently vfio-pci uses the VFIO API to interact with "physical" devices >> and system IOMMUs. I highlight /physical/ there because some of these >> physical devices are SR-IOV VFs, which is somewhat of a fuzzy concept, >> somewhere between fixed hardware and a virtual device implemented in >> software. That software just happens to be running on the physical >> endpoint. > > Agree. > > One clarification for rest discussion, is that we're talking about GVT-g vGPU > here which is a pure software GPU virtualization technique. GVT-d (note > some use in the text) refers to passing through the whole GPU or a specific > VF. GVT-d already falls into existing VFIO APIs nicely (though some on-going > effort to remove Intel specific platform stickness from gfx driver). :-) > Hi Alex, thanks for the discussion. In addition to Kevin's replies, I have a high-level question: can VFIO be used by QEMU for both KVM and Xen? -- Thanks, Jike >> >> vGPUs are similar, with the virtual device created at a different point, >> host software. They also rely on different IOMMU constructs, making use >> of the MMU capabilities of the GPU (GTTs and such), but really having >> similar requirements. > > One important difference between system IOMMU and GPU-MMU here. > System IOMMU is very much about translation from a DMA target > (IOVA on native, or GPA in virtualization case) to HPA. However GPU > internal MMUs is to translate from Graphics Memory Address (GMA) > to DMA target (HPA if system IOMMU is disabled, or IOVA/GPA if system > IOMMU is enabled). GMA is an internal addr space within GPU, not > exposed to Qemu and fully managed by GVT-g device model. Since it's > not a standard PCI defined resource, we don't need abstract this capability > in VFIO interface. > >> >> The proposal is therefore that GPU vendors can expose vGPUs to >> userspace, and thus to QEMU, using the VFIO API. For instance, vfio >> supports modular bus drivers and IOMMU drivers. An intel-vfio-gvt-d >> module (or extension of i915) can register as a vfio bus driver, create >> a struct device per vGPU, create an IOMMU group for that device, and >> register that device with the vfio-core. Since we don't rely on the >> system IOMMU for GVT-d vGPU assignment, another vGPU vendor driver (or >> extension of the same module) can register a "type1" compliant IOMMU >> driver into vfio-core. From the perspective of QEMU then, all of the >> existing vfio-pci code is re-used, QEMU remains largely unaware of any >> specifics of the vGPU being assigned, and the only necessary change so >> far is how QEMU traverses sysfs to find the device and thus the IOMMU >> group leading to the vfio group. > > GVT-g requires to pin guest memory and query GPA->HPA information, > upon which shadow GTTs will be updated accordingly from (GMA->GPA) > to (GMA->HPA). So yes, here a dummy or simple "type1" compliant IOMMU > can be introduced just for this requirement. > > However there's one tricky point which I'm not sure whether overall > VFIO concept will be violated. GVT-g doesn't require system IOMMU > to function, however host system may enable system IOMMU just for > hardening purpose. This means two-level translations existing (GMA-> > IOVA->HPA), so the dummy IOMMU driver has to request system IOMMU > driver to allocate IOVA for VMs and then setup IOVA->HPA mapping > in IOMMU page table. In this case, multiple VM's translations are > multiplexed in one IOMMU page table. > > We might need create some group/sub-group or parent/child concepts > among those IOMMUs for thorough permission control. > >> >> There are a few areas where we know we'll need to extend the VFIO API to >> make this work, but it seems like they can all be done generically. One >> is that PCI BARs are described through the VFIO API as regions and each >> region has a single flag describing whether mmap (ie. direct mapping) of >> that region is possible. We expect that vGPUs likely need finer >> granularity, enabling some areas within a BAR to be trapped and fowarded >> as a read or write access for the vGPU-vfio-device module to emulate, >> while other regions, like framebuffers or texture regions, are directly >> mapped. I have prototype code to enable this already. > > Yes in GVT-g one BAR resource might be partitioned among multiple vGPUs. > If VFIO can support such partial resource assignment, it'd be great. Similar > parent/child concept might also be required here, so any resource enumerated > on a vGPU shouldn't break limitations enforced on the physical device. > > One unique requirement for GVT-g here, though, is that vGPU device model > need to know guest BAR configuration for proper emulation (e.g. register > IO emulation handler to KVM). Similar is about guest MSI vector for virtual > interrupt injection. Not sure how this can be fit into common VFIO model. > Does VFIO allow vendor specific extension today? > >> >> Another area is that we really don't want to proliferate each vGPU >> needing a new IOMMU type within vfio. The existing type1 IOMMU provides >> potentially the most simple mapping and unmapping interface possible. >> We'd therefore need to allow multiple "type1" IOMMU drivers for vfio, >> making type1 be more of an interface specification rather than a single >> implementation. This is a trivial change to make within vfio and one >> that I believe is compatible with the existing API. Note that >> implementing a type1-compliant vfio IOMMU does not imply pinning an >> mapping every registered page. A vGPU, with mediated device access, may >> use this only to track the current HVA to GPA mappings for a VM. Only >> when a DMA is enabled for the vGPU instance is that HVA pinned and an >> HPA to GPA translation programmed into the GPU MMU. >> >> Another area of extension is how to expose a framebuffer to QEMU for >> seamless integration into a SPICE/VNC channel. For this I believe we >> could use a new region, much like we've done to expose VGA access >> through a vfio device file descriptor. An area within this new >> framebuffer region could be directly mappable in QEMU while a >> non-mappable page, at a standard location with standardized format, >> provides a description of framebuffer and potentially even a >> communication channel to synchronize framebuffer captures. This would >> be new code for QEMU, but something we could share among all vGPU >> implementations. > > Now GVT-g already provides an interface to decode framebuffer information, > w/ an assumption that the framebuffer will be further composited into > OpenGL APIs. So the format is defined according to OpenGL definition. > Does that meet SPICE requirement? > > Another thing to be added. Framebuffers are frequently switched in > reality. So either Qemu needs to poll or a notification mechanism is required. > And since it's dynamic, having framebuffer page directly exposed in the > new region might be tricky. We can just expose framebuffer information > (including base, format, etc.) and let Qemu to map separately out of VFIO > interface. > > And... this works fine with vGPU model since software knows all the > detail about framebuffer. However in pass-through case, who do you expect > to provide that information? Is it OK to introduce vGPU specific APIs in > VFIO? > >> >> Another obvious area to be standardized would be how to discover, >> create, and destroy vGPU instances. SR-IOV has a standard mechanism to >> create VFs in sysfs and I would propose that vGPU vendors try to >> standardize on similar interfaces to enable libvirt to easily discover >> the vGPU capabilities of a given GPU and manage the lifecycle of a vGPU >> instance. > > Now there is no standard. We expose vGPU life-cycle mgmt. APIs through > sysfs (under i915 node), which is very Intel specific. In reality different > vendors have quite different capabilities for their own vGPUs, so not sure > how standard we can define such a mechanism. But this code should be > minor to be maintained in libvirt. > >> >> This is obviously a lot to digest, but I'd certainly be interested in >> hearing feedback on this proposal as well as try to clarify anything >> I've left out or misrepresented above. Another benefit to this >> mechanism is that direct GPU assignment and vGPU assignment use the same >> code within QEMU and same API to the kernel, which should make debugging >> and code support between the two easier. I'd really like to start a >> discussion around this proposal, and of course the first open source >> implementation of this sort of model will really help to drive the >> direction it takes. Thanks! >> > > Thanks for starting this discussion. Intel will definitely work with > community on this work. Based on earlier comments, I'm not sure > whether we can exactly same code for direct GPU assignment and > vGPU assignment, since even we extend VFIO some interfaces might > be vGPU specific. Does this way still achieve your end goal? > > Thanks > Kevin > ^ permalink raw reply [flat|nested] 49+ messages in thread
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F7152DB@SHSMSX101.ccr.corp.intel.com> 2015-11-19 7:22 ` Jike Song @ 2015-11-19 8:40 ` Gerd Hoffmann [not found] ` <564D78D0.80904@intel.com> ` (3 subsequent siblings) 5 siblings, 0 replies; 49+ messages in thread From: Gerd Hoffmann @ 2015-11-19 8:40 UTC (permalink / raw) To: Tian, Kevin Cc: igvt-g, Song, Jike, Reddy, Raghuveer, qemu-devel, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Alex Williamson, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan Hi, > > Another area of extension is how to expose a framebuffer to QEMU for > > seamless integration into a SPICE/VNC channel. For this I believe we > > could use a new region, much like we've done to expose VGA access > > through a vfio device file descriptor. An area within this new > > framebuffer region could be directly mappable in QEMU while a > > non-mappable page, at a standard location with standardized format, > > provides a description of framebuffer and potentially even a > > communication channel to synchronize framebuffer captures. This would > > be new code for QEMU, but something we could share among all vGPU > > implementations. > > Now GVT-g already provides an interface to decode framebuffer information, > w/ an assumption that the framebuffer will be further composited into > OpenGL APIs. Can I have a pointer to docs / code? iGVT-g_Setup_Guide.txt mentions a "Indirect Display Mode", but doesn't explain how the guest framebuffer can be accessed then. > So the format is defined according to OpenGL definition. > Does that meet SPICE requirement? Yes and no ;) Some more background: We basically have two rendering paths in qemu. The classic one, without opengl, and a new, still emerging one, using opengl and dma-bufs (gtk support merged for qemu 2.5, sdl2 support will land in 2.6, spice support still WIP, hopefully 2.6 too). For best performance you probably want use the new opengl-based rendering whenever possible. However I do *not* expect the classic rendering path disappear, we'll continue to need that in various cases, most prominent one being vnc support. So, for non-opengl rendering qemu needs the guest framebuffer data so it can feed it into the vnc server. The vfio framebuffer region is meant to support this use case. > Another thing to be added. Framebuffers are frequently switched in > reality. So either Qemu needs to poll or a notification mechanism is required. The idea is to have qemu poll (and adapt poll rate, i.e. without vnc client connected qemu will poll alot less frequently). > And since it's dynamic, having framebuffer page directly exposed in the > new region might be tricky. We can just expose framebuffer information > (including base, format, etc.) and let Qemu to map separately out of VFIO > interface. Allocate some memory, ask gpu to blit the guest framebuffer there, i.e. provide a snapshot of the current guest display instead of playing mapping tricks? > And... this works fine with vGPU model since software knows all the > detail about framebuffer. However in pass-through case, who do you expect > to provide that information? Is it OK to introduce vGPU specific APIs in > VFIO? It will only be used in the vgpu case, not for pass-though. We think it is better to extend the vfio interface to improve vgpu support rather than inventing something new while vfio can satisfy 90% of the vgpu needs already. We want avoid vendor-specific extensions though, the vgpu extension should work across vendors. > Now there is no standard. We expose vGPU life-cycle mgmt. APIs through > sysfs (under i915 node), which is very Intel specific. In reality different > vendors have quite different capabilities for their own vGPUs, so not sure > how standard we can define such a mechanism. Agree when it comes to create vGPU instances. > But this code should be > minor to be maintained in libvirt. As far I know libvirt only needs to discover those devices. If they look like sr/iov devices in sysfs this might work without any changes to libvirt. cheers, Gerd ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <564D78D0.80904@intel.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <564D78D0.80904@intel.com> @ 2015-11-19 15:32 ` Stefano Stabellini [not found] ` <alpine.DEB.2.02.1511191529370.1107@kaball.uk.xensource.com> 1 sibling, 0 replies; 49+ messages in thread From: Stefano Stabellini @ 2015-11-19 15:32 UTC (permalink / raw) To: Jike Song Cc: igvt-g, Tian, Kevin, Reddy, Raghuveer, qemu-devel, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Alex Williamson, Gerd Hoffmann, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan On Thu, 19 Nov 2015, Jike Song wrote: > Hi Alex, thanks for the discussion. > > In addition to Kevin's replies, I have a high-level question: can VFIO > be used by QEMU for both KVM and Xen? No. VFIO cannot be used with Xen today. When running on Xen, the IOMMU is owned by Xen. ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <alpine.DEB.2.02.1511191529370.1107@kaball.uk.xensource.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <alpine.DEB.2.02.1511191529370.1107@kaball.uk.xensource.com> @ 2015-11-19 15:49 ` Paolo Bonzini 2015-11-19 15:52 ` Alex Williamson ` (2 subsequent siblings) 3 siblings, 0 replies; 49+ messages in thread From: Paolo Bonzini @ 2015-11-19 15:49 UTC (permalink / raw) To: Stefano Stabellini, Jike Song Cc: igvt-g, Tian, Kevin, Reddy, Raghuveer, qemu-devel, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Alex Williamson, Gerd Hoffmann, Zhou, Chao, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan On 19/11/2015 16:32, Stefano Stabellini wrote: > > In addition to Kevin's replies, I have a high-level question: can VFIO > > be used by QEMU for both KVM and Xen? > > No. VFIO cannot be used with Xen today. When running on Xen, the IOMMU > is owned by Xen. I don't think QEMU command line compatibility between KVM and Xen should be a design goal for GVT-g. Nevertheless, it shouldn't be a problem to use a "virtual" VFIO (which doesn't need the IOMMU, because it uses the MMU in the physical GPU) even under Xen. Paolo ^ permalink raw reply [flat|nested] 49+ messages in thread
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <alpine.DEB.2.02.1511191529370.1107@kaball.uk.xensource.com> 2015-11-19 15:49 ` Paolo Bonzini @ 2015-11-19 15:52 ` Alex Williamson [not found] ` <564DEF9A.3010901@redhat.com> [not found] ` <1447948366.4697.119.camel@redhat.com> 3 siblings, 0 replies; 49+ messages in thread From: Alex Williamson @ 2015-11-19 15:52 UTC (permalink / raw) To: Stefano Stabellini Cc: igvt-g, Jike Song, Reddy, Raghuveer, qemu-devel, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, Tian, Kevin, linux-kernel, Gerd Hoffmann, Zhou, Chao, Paolo Bonzini, Zhu, Libo, xen-devel, Wang, Hongbo, Lv, Zhiyuan On Thu, 2015-11-19 at 15:32 +0000, Stefano Stabellini wrote: > On Thu, 19 Nov 2015, Jike Song wrote: > > Hi Alex, thanks for the discussion. > > > > In addition to Kevin's replies, I have a high-level question: can VFIO > > be used by QEMU for both KVM and Xen? > > No. VFIO cannot be used with Xen today. When running on Xen, the IOMMU > is owned by Xen. Right, but in this case we're talking about device MMUs, which are owned by the device driver which I think is running in dom0, right? This proposal doesn't require support of the system IOMMU, the dom0 driver maps IOVA translations just as it would for itself. We're largely proposing use of the VFIO API to provide a common interface to expose a PCI(e) device to QEMU, but what happens in the vGPU vendor device and IOMMU backends is specific to the device and perhaps even specific to the hypervisor. Thanks, Alex ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <564DEF9A.3010901@redhat.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <564DEF9A.3010901@redhat.com> @ 2015-11-19 16:12 ` Stefano Stabellini 0 siblings, 0 replies; 49+ messages in thread From: Stefano Stabellini @ 2015-11-19 16:12 UTC (permalink / raw) To: Paolo Bonzini Cc: igvt-g, Tian, Kevin, Reddy, Raghuveer, qemu-devel, Stefano Stabellini, White, Michael L, linux-kernel, intel-gfx, Li, Susie, Dong, Eddie, Jike Song, Cowperthwaite, David J, xen-devel, Alex Williamson, Gerd Hoffmann, Zhou, Chao, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan On Thu, 19 Nov 2015, Paolo Bonzini wrote: > On 19/11/2015 16:32, Stefano Stabellini wrote: > > > In addition to Kevin's replies, I have a high-level question: can VFIO > > > be used by QEMU for both KVM and Xen? > > > > No. VFIO cannot be used with Xen today. When running on Xen, the IOMMU > > is owned by Xen. > > I don't think QEMU command line compatibility between KVM and Xen should > be a design goal for GVT-g. Right, I agree. In fact I don't want my comment to be taken as "VFIO should not be used at all". I only meant to reply to the question. I think it is unlikely to be the best path for Xen, but it could very well be the right answer for KVM. > Nevertheless, it shouldn't be a problem to use a "virtual" VFIO (which > doesn't need the IOMMU, because it uses the MMU in the physical GPU) > even under Xen. That could be true, but I would expect some extra work to be needed to make use of VFIO on Xen. Also it might cause some duplication of functionalities with the current Xen passthrough code base. ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <1447948366.4697.119.camel@redhat.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <1447948366.4697.119.camel@redhat.com> @ 2015-11-20 2:58 ` Jike Song [not found] ` <564E8C51.6070706@intel.com> 1 sibling, 0 replies; 49+ messages in thread From: Jike Song @ 2015-11-20 2:58 UTC (permalink / raw) To: Alex Williamson Cc: igvt-g, Tian, Kevin, Reddy, Raghuveer, qemu-devel, Stefano Stabellini, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Gerd Hoffmann, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan On 11/19/2015 11:52 PM, Alex Williamson wrote: > On Thu, 2015-11-19 at 15:32 +0000, Stefano Stabellini wrote: >> On Thu, 19 Nov 2015, Jike Song wrote: >>> Hi Alex, thanks for the discussion. >>> >>> In addition to Kevin's replies, I have a high-level question: can VFIO >>> be used by QEMU for both KVM and Xen? >> >> No. VFIO cannot be used with Xen today. When running on Xen, the IOMMU >> is owned by Xen. > > Right, but in this case we're talking about device MMUs, which are owned > by the device driver which I think is running in dom0, right? This > proposal doesn't require support of the system IOMMU, the dom0 driver > maps IOVA translations just as it would for itself. We're largely > proposing use of the VFIO API to provide a common interface to expose a > PCI(e) device to QEMU, but what happens in the vGPU vendor device and > IOMMU backends is specific to the device and perhaps even specific to > the hypervisor. Thanks, Let me conclude this, and please correct me in case of any misread: the vGPU interface between kernel and QEMU will be through VFIO, with a new VFIO backend (instead of the existing type1), for both KVMGT and XenGT? > > Alex > -- Thanks, Jike ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <564E8C51.6070706@intel.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <564E8C51.6070706@intel.com> @ 2015-11-20 4:22 ` Alex Williamson [not found] ` <1447993371.4697.257.camel@redhat.com> 1 sibling, 0 replies; 49+ messages in thread From: Alex Williamson @ 2015-11-20 4:22 UTC (permalink / raw) To: Jike Song Cc: igvt-g, Tian, Kevin, Reddy, Raghuveer, qemu-devel, Stefano Stabellini, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Gerd Hoffmann, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan On Fri, 2015-11-20 at 10:58 +0800, Jike Song wrote: > On 11/19/2015 11:52 PM, Alex Williamson wrote: > > On Thu, 2015-11-19 at 15:32 +0000, Stefano Stabellini wrote: > >> On Thu, 19 Nov 2015, Jike Song wrote: > >>> Hi Alex, thanks for the discussion. > >>> > >>> In addition to Kevin's replies, I have a high-level question: can VFIO > >>> be used by QEMU for both KVM and Xen? > >> > >> No. VFIO cannot be used with Xen today. When running on Xen, the IOMMU > >> is owned by Xen. > > > > Right, but in this case we're talking about device MMUs, which are owned > > by the device driver which I think is running in dom0, right? This > > proposal doesn't require support of the system IOMMU, the dom0 driver > > maps IOVA translations just as it would for itself. We're largely > > proposing use of the VFIO API to provide a common interface to expose a > > PCI(e) device to QEMU, but what happens in the vGPU vendor device and > > IOMMU backends is specific to the device and perhaps even specific to > > the hypervisor. Thanks, > > Let me conclude this, and please correct me in case of any misread: the > vGPU interface between kernel and QEMU will be through VFIO, with a new > VFIO backend (instead of the existing type1), for both KVMGT and XenGT? My primary concern is KVM and QEMU upstream, the proposal is not specifically directed at XenGT, but does not exclude it either. Xen is welcome to adopt this proposal as well, it simply defines the channel through which vGPUs are exposed to QEMU as the VFIO API. The core VFIO code in the Linux kernel is just as available for use in Xen dom0 as it is for a KVM host. VFIO in QEMU certainly knows about some accelerations for KVM, but these are almost entirely around allowing eventfd based interrupts to be injected through KVM, which is something I'm sure Xen could provide as well. These accelerations are also not required, VFIO based device assignment in QEMU works with or without KVM. Likewise, the VFIO kernel interface knows nothing about KVM and has no dependencies on it. There are two components to the VFIO API, one is the type1 compliant IOMMU interface, which for this proposal is really doing nothing more than tracking the HVA to GPA mappings for the VM. This much seems entirely common regardless of the hypervisor. The other part is the device interface. The lifecycle of the virtual device seems like it would be entirely shared, as does much of the emulation components of the device. When we get to pinning pages, providing direct access to memory ranges for a VM, and accelerating interrupts, the vGPU drivers will likely need some per hypervisor branches, but these are areas where that's true no matter what the interface. I'm probably over simplifying, but hopefully not too much, correct me if I'm wrong. The benefit of course is that aside from some extensions to the API, the QEMU components are already in place and there's a lot more leverage for getting both QEMU and libvirt support upstream in being able to support multiple vendors, perhaps multiple hypervisors, with the same code. Also, I'm not sure how useful it is, but VFIO is a userspace driver interface, where here we're predominantly talking about that userspace driver being QEMU. It's not limited to that though. A userspace compute application could have direct access to a vGPU through this model. Thanks, Alex ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <1447993371.4697.257.camel@redhat.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <1447993371.4697.257.camel@redhat.com> @ 2015-11-20 5:51 ` Jike Song [not found] ` <564EB4F2.9080605@intel.com> 1 sibling, 0 replies; 49+ messages in thread From: Jike Song @ 2015-11-20 5:51 UTC (permalink / raw) To: Alex Williamson Cc: igvt-g, Tian, Kevin, Reddy, Raghuveer, qemu-devel, Stefano Stabellini, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Gerd Hoffmann, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan On 11/20/2015 12:22 PM, Alex Williamson wrote: > On Fri, 2015-11-20 at 10:58 +0800, Jike Song wrote: >> On 11/19/2015 11:52 PM, Alex Williamson wrote: >>> On Thu, 2015-11-19 at 15:32 +0000, Stefano Stabellini wrote: >>>> On Thu, 19 Nov 2015, Jike Song wrote: >>>>> Hi Alex, thanks for the discussion. >>>>> >>>>> In addition to Kevin's replies, I have a high-level question: can VFIO >>>>> be used by QEMU for both KVM and Xen? >>>> >>>> No. VFIO cannot be used with Xen today. When running on Xen, the IOMMU >>>> is owned by Xen. >>> >>> Right, but in this case we're talking about device MMUs, which are owned >>> by the device driver which I think is running in dom0, right? This >>> proposal doesn't require support of the system IOMMU, the dom0 driver >>> maps IOVA translations just as it would for itself. We're largely >>> proposing use of the VFIO API to provide a common interface to expose a >>> PCI(e) device to QEMU, but what happens in the vGPU vendor device and >>> IOMMU backends is specific to the device and perhaps even specific to >>> the hypervisor. Thanks, >> >> Let me conclude this, and please correct me in case of any misread: the >> vGPU interface between kernel and QEMU will be through VFIO, with a new >> VFIO backend (instead of the existing type1), for both KVMGT and XenGT? > > My primary concern is KVM and QEMU upstream, the proposal is not > specifically directed at XenGT, but does not exclude it either. Xen is > welcome to adopt this proposal as well, it simply defines the channel > through which vGPUs are exposed to QEMU as the VFIO API. The core VFIO > code in the Linux kernel is just as available for use in Xen dom0 as it > is for a KVM host. VFIO in QEMU certainly knows about some > accelerations for KVM, but these are almost entirely around allowing > eventfd based interrupts to be injected through KVM, which is something > I'm sure Xen could provide as well. These accelerations are also not > required, VFIO based device assignment in QEMU works with or without > KVM. Likewise, the VFIO kernel interface knows nothing about KVM and > has no dependencies on it. > > There are two components to the VFIO API, one is the type1 compliant > IOMMU interface, which for this proposal is really doing nothing more > than tracking the HVA to GPA mappings for the VM. This much seems > entirely common regardless of the hypervisor. The other part is the > device interface. The lifecycle of the virtual device seems like it > would be entirely shared, as does much of the emulation components of > the device. When we get to pinning pages, providing direct access to > memory ranges for a VM, and accelerating interrupts, the vGPU drivers > will likely need some per hypervisor branches, but these are areas where > that's true no matter what the interface. I'm probably over > simplifying, but hopefully not too much, correct me if I'm wrong. > Thanks for confirmation. For QEMU/KVM, I totally agree your point; However, if we take XenGT to consider, it will be a bit more complex: with Xen hypervisor and Dom0 kernel running in different level, it's not a straight- forward way for QEMU to do something like mapping a portion of MMIO BAR via VFIO in Dom0 kernel, instead of calling hypercalls directly. I don't know if there is a better way to handle this. But I do agree that channels between kernel and Qemu via VFIO is a good idea, even though we may have to split KVMGT/XenGT in Qemu a bit. We are currently working on moving all of PCI CFG emulation from kernel to Qemu, hopefully we can release it by end of this year and work with you guys to adjust it for the agreed method. > The benefit of course is that aside from some extensions to the API, the > QEMU components are already in place and there's a lot more leverage for > getting both QEMU and libvirt support upstream in being able to support > multiple vendors, perhaps multiple hypervisors, with the same code. > Also, I'm not sure how useful it is, but VFIO is a userspace driver > interface, where here we're predominantly talking about that userspace > driver being QEMU. It's not limited to that though. A userspace > compute application could have direct access to a vGPU through this > model. Thanks, > > Alex > -- Thanks, Jike ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <564EB4F2.9080605@intel.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <564EB4F2.9080605@intel.com> @ 2015-11-20 6:01 ` Tian, Kevin 2015-11-20 16:40 ` Alex Williamson [not found] ` <1448037640.4697.266.camel@redhat.com> 2 siblings, 0 replies; 49+ messages in thread From: Tian, Kevin @ 2015-11-20 6:01 UTC (permalink / raw) To: Song, Jike, Alex Williamson Cc: igvt-g, qemu-devel, Reddy, Raghuveer, Gerd Hoffmann, Stefano Stabellini, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan > From: Song, Jike > Sent: Friday, November 20, 2015 1:52 PM > > On 11/20/2015 12:22 PM, Alex Williamson wrote: > > On Fri, 2015-11-20 at 10:58 +0800, Jike Song wrote: > >> On 11/19/2015 11:52 PM, Alex Williamson wrote: > >>> On Thu, 2015-11-19 at 15:32 +0000, Stefano Stabellini wrote: > >>>> On Thu, 19 Nov 2015, Jike Song wrote: > >>>>> Hi Alex, thanks for the discussion. > >>>>> > >>>>> In addition to Kevin's replies, I have a high-level question: can VFIO > >>>>> be used by QEMU for both KVM and Xen? > >>>> > >>>> No. VFIO cannot be used with Xen today. When running on Xen, the IOMMU > >>>> is owned by Xen. > >>> > >>> Right, but in this case we're talking about device MMUs, which are owned > >>> by the device driver which I think is running in dom0, right? This > >>> proposal doesn't require support of the system IOMMU, the dom0 driver > >>> maps IOVA translations just as it would for itself. We're largely > >>> proposing use of the VFIO API to provide a common interface to expose a > >>> PCI(e) device to QEMU, but what happens in the vGPU vendor device and > >>> IOMMU backends is specific to the device and perhaps even specific to > >>> the hypervisor. Thanks, As I commented in another thread, let's not including device MMU in this discussion, which is purely device internal so not in the scope of VFIO (Qemu doesn't need to know). Let's keep discussion about a dummy type-1 IOMMU driver for maintaining G2H mapping. > >> > >> Let me conclude this, and please correct me in case of any misread: the > >> vGPU interface between kernel and QEMU will be through VFIO, with a new > >> VFIO backend (instead of the existing type1), for both KVMGT and XenGT? > > > > My primary concern is KVM and QEMU upstream, the proposal is not > > specifically directed at XenGT, but does not exclude it either. Xen is > > welcome to adopt this proposal as well, it simply defines the channel > > through which vGPUs are exposed to QEMU as the VFIO API. The core VFIO > > code in the Linux kernel is just as available for use in Xen dom0 as it > > is for a KVM host. VFIO in QEMU certainly knows about some > > accelerations for KVM, but these are almost entirely around allowing > > eventfd based interrupts to be injected through KVM, which is something > > I'm sure Xen could provide as well. These accelerations are also not > > required, VFIO based device assignment in QEMU works with or without > > KVM. Likewise, the VFIO kernel interface knows nothing about KVM and > > has no dependencies on it. > > > > There are two components to the VFIO API, one is the type1 compliant > > IOMMU interface, which for this proposal is really doing nothing more > > than tracking the HVA to GPA mappings for the VM. This much seems > > entirely common regardless of the hypervisor. The other part is the > > device interface. The lifecycle of the virtual device seems like it > > would be entirely shared, as does much of the emulation components of > > the device. When we get to pinning pages, providing direct access to > > memory ranges for a VM, and accelerating interrupts, the vGPU drivers > > will likely need some per hypervisor branches, but these are areas where > > that's true no matter what the interface. I'm probably over > > simplifying, but hopefully not too much, correct me if I'm wrong. > > > > Thanks for confirmation. For QEMU/KVM, I totally agree your point; However, > if we take XenGT to consider, it will be a bit more complex: with Xen > hypervisor and Dom0 kernel running in different level, it's not a straight- > forward way for QEMU to do something like mapping a portion of MMIO BAR > via VFIO in Dom0 kernel, instead of calling hypercalls directly. > > I don't know if there is a better way to handle this. But I do agree that > channels between kernel and Qemu via VFIO is a good idea, even though we > may have to split KVMGT/XenGT in Qemu a bit. We are currently working on > moving all of PCI CFG emulation from kernel to Qemu, hopefully we can > release it by end of this year and work with you guys to adjust it for > the agreed method. Currently pass-through path is already different in Qemu between Xen and KVM. For now let's keep it simple about how to extend VFIO to manage vGPU. In the future if Xen decides to use VFIO, it should not be that difficult to add some Xen specific vfio driver there. > > > > The benefit of course is that aside from some extensions to the API, the > > QEMU components are already in place and there's a lot more leverage for > > getting both QEMU and libvirt support upstream in being able to support > > multiple vendors, perhaps multiple hypervisors, with the same code. > > Also, I'm not sure how useful it is, but VFIO is a userspace driver > > interface, where here we're predominantly talking about that userspace > > driver being QEMU. It's not limited to that though. A userspace > > compute application could have direct access to a vGPU through this > > model. Thanks, > One idea in our mind is to extend vGPU for native application, e.g. to support better isolation among containers regarding to GPU workloads. Thanks Kevin ^ permalink raw reply [flat|nested] 49+ messages in thread
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <564EB4F2.9080605@intel.com> 2015-11-20 6:01 ` Tian, Kevin @ 2015-11-20 16:40 ` Alex Williamson [not found] ` <1448037640.4697.266.camel@redhat.com> 2 siblings, 0 replies; 49+ messages in thread From: Alex Williamson @ 2015-11-20 16:40 UTC (permalink / raw) To: Jike Song Cc: igvt-g, Tian, Kevin, Reddy, Raghuveer, qemu-devel, Stefano Stabellini, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Gerd Hoffmann, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan On Fri, 2015-11-20 at 13:51 +0800, Jike Song wrote: > On 11/20/2015 12:22 PM, Alex Williamson wrote: > > On Fri, 2015-11-20 at 10:58 +0800, Jike Song wrote: > >> On 11/19/2015 11:52 PM, Alex Williamson wrote: > >>> On Thu, 2015-11-19 at 15:32 +0000, Stefano Stabellini wrote: > >>>> On Thu, 19 Nov 2015, Jike Song wrote: > >>>>> Hi Alex, thanks for the discussion. > >>>>> > >>>>> In addition to Kevin's replies, I have a high-level question: can VFIO > >>>>> be used by QEMU for both KVM and Xen? > >>>> > >>>> No. VFIO cannot be used with Xen today. When running on Xen, the IOMMU > >>>> is owned by Xen. > >>> > >>> Right, but in this case we're talking about device MMUs, which are owned > >>> by the device driver which I think is running in dom0, right? This > >>> proposal doesn't require support of the system IOMMU, the dom0 driver > >>> maps IOVA translations just as it would for itself. We're largely > >>> proposing use of the VFIO API to provide a common interface to expose a > >>> PCI(e) device to QEMU, but what happens in the vGPU vendor device and > >>> IOMMU backends is specific to the device and perhaps even specific to > >>> the hypervisor. Thanks, > >> > >> Let me conclude this, and please correct me in case of any misread: the > >> vGPU interface between kernel and QEMU will be through VFIO, with a new > >> VFIO backend (instead of the existing type1), for both KVMGT and XenGT? > > > > My primary concern is KVM and QEMU upstream, the proposal is not > > specifically directed at XenGT, but does not exclude it either. Xen is > > welcome to adopt this proposal as well, it simply defines the channel > > through which vGPUs are exposed to QEMU as the VFIO API. The core VFIO > > code in the Linux kernel is just as available for use in Xen dom0 as it > > is for a KVM host. VFIO in QEMU certainly knows about some > > accelerations for KVM, but these are almost entirely around allowing > > eventfd based interrupts to be injected through KVM, which is something > > I'm sure Xen could provide as well. These accelerations are also not > > required, VFIO based device assignment in QEMU works with or without > > KVM. Likewise, the VFIO kernel interface knows nothing about KVM and > > has no dependencies on it. > > > > There are two components to the VFIO API, one is the type1 compliant > > IOMMU interface, which for this proposal is really doing nothing more > > than tracking the HVA to GPA mappings for the VM. This much seems > > entirely common regardless of the hypervisor. The other part is the > > device interface. The lifecycle of the virtual device seems like it > > would be entirely shared, as does much of the emulation components of > > the device. When we get to pinning pages, providing direct access to > > memory ranges for a VM, and accelerating interrupts, the vGPU drivers > > will likely need some per hypervisor branches, but these are areas where > > that's true no matter what the interface. I'm probably over > > simplifying, but hopefully not too much, correct me if I'm wrong. > > > > Thanks for confirmation. For QEMU/KVM, I totally agree your point; However, > if we take XenGT to consider, it will be a bit more complex: with Xen > hypervisor and Dom0 kernel running in different level, it's not a straight- > forward way for QEMU to do something like mapping a portion of MMIO BAR > via VFIO in Dom0 kernel, instead of calling hypercalls directly. This would need to be part of the support added for Xen. To directly map a device MMIO space to the VM, VFIO provides an mmap, QEMU registers that mmap with KVM, or Xen. It's all just MemoryRegions in QEMU. Perhaps it's even already supported by Xen. > I don't know if there is a better way to handle this. But I do agree that > channels between kernel and Qemu via VFIO is a good idea, even though we > may have to split KVMGT/XenGT in Qemu a bit. We are currently working on > moving all of PCI CFG emulation from kernel to Qemu, hopefully we can > release it by end of this year and work with you guys to adjust it for > the agreed method. Well, moving PCI config space emulation from kernel to QEMU is exactly the wrong direction to take for this proposal. Config space access to the vGPU would occur through the VFIO API. So if you already have config space emulation in the kernel, that's already one less piece of work for a VFIO model, it just needs to be "wired up" through the VFIO API. Thanks, Alex ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <1448037640.4697.266.camel@redhat.com>]
* Re: [Qemu-devel] [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <1448037640.4697.266.camel@redhat.com> @ 2015-11-23 4:52 ` Jike Song 0 siblings, 0 replies; 49+ messages in thread From: Jike Song @ 2015-11-23 4:52 UTC (permalink / raw) To: Alex Williamson Cc: igvt-g, Tian, Kevin, Li, Susie, Lv, Zhiyuan, Stefano Stabellini, White, Michael L, Dong, Eddie, intel-gfx, Reddy, Raghuveer, Cowperthwaite, David J, qemu-devel, linux-kernel, Gerd Hoffmann, Paolo Bonzini, Zhu, Libo, xen-devel, Wang, Hongbo, Zhou, Chao On 11/21/2015 12:40 AM, Alex Williamson wrote: >> >> Thanks for confirmation. For QEMU/KVM, I totally agree your point; However, >> if we take XenGT to consider, it will be a bit more complex: with Xen >> hypervisor and Dom0 kernel running in different level, it's not a straight- >> forward way for QEMU to do something like mapping a portion of MMIO BAR >> via VFIO in Dom0 kernel, instead of calling hypercalls directly. > > This would need to be part of the support added for Xen. To directly > map a device MMIO space to the VM, VFIO provides an mmap, QEMU registers > that mmap with KVM, or Xen. It's all just MemoryRegions in QEMU. > Perhaps it's even already supported by Xen. > AFAICT, things are different here for Xen. To establish mappings between Dom0 pfns and DomU gfn, one will have to call Xen hypercalls. In the scene above, either QEMU calls the hypercall directly, or it asks the VFIO in dom0 kernel to do it. I'm not saying that VFIO is not applicable for XenGT. I just want to say that given the VFIO based kernel/QEMU split model, additional effort is needed for XenGT. >> I don't know if there is a better way to handle this. But I do agree that >> channels between kernel and Qemu via VFIO is a good idea, even though we >> may have to split KVMGT/XenGT in Qemu a bit. We are currently working on >> moving all of PCI CFG emulation from kernel to Qemu, hopefully we can >> release it by end of this year and work with you guys to adjust it for >> the agreed method. > > Well, moving PCI config space emulation from kernel to QEMU is exactly > the wrong direction to take for this proposal. Config space access to > the vGPU would occur through the VFIO API. So if you already have > config space emulation in the kernel, that's already one less piece of > work for a VFIO model, it just needs to be "wired up" through the VFIO > API. Thanks, If I understand correctly, the idea of moving PCI CFG to QEMU is actually very similar to your VFIO design: a) VM access a CFG regsiter b) KVM hands over the access to QEMU c) QEMU may emulate it, and when necessary, ioctl into kernel(i915/vgt) > > Alex > > -- Thanks, Jike ^ permalink raw reply [flat|nested] 49+ messages in thread
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F7152DB@SHSMSX101.ccr.corp.intel.com> ` (2 preceding siblings ...) [not found] ` <564D78D0.80904@intel.com> @ 2015-11-19 20:02 ` Alex Williamson [not found] ` <1447922452.25140.39.camel@redhat.com> [not found] ` <1447963356.4697.184.camel@redhat.com> 5 siblings, 0 replies; 49+ messages in thread From: Alex Williamson @ 2015-11-19 20:02 UTC (permalink / raw) To: Tian, Kevin Cc: igvt-g, Song, Jike, Reddy, Raghuveer, qemu-devel, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Gerd Hoffmann, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan Hi Kevin, On Thu, 2015-11-19 at 04:06 +0000, Tian, Kevin wrote: > > From: Alex Williamson [mailto:alex.williamson@redhat.com] > > Sent: Thursday, November 19, 2015 2:12 AM > > > > [cc +qemu-devel, +paolo, +gerd] > > > > On Tue, 2015-10-27 at 17:25 +0800, Jike Song wrote: > > > Hi all, > > > > > > We are pleased to announce another update of Intel GVT-g for Xen. > > > > > > Intel GVT-g is a full GPU virtualization solution with mediated > > > pass-through, starting from 4th generation Intel Core(TM) processors > > > with Intel Graphics processors. A virtual GPU instance is maintained > > > for each VM, with part of performance critical resources directly > > > assigned. The capability of running native graphics driver inside a > > > VM, without hypervisor intervention in performance critical paths, > > > achieves a good balance among performance, feature, and sharing > > > capability. Xen is currently supported on Intel Processor Graphics > > > (a.k.a. XenGT); and the core logic can be easily ported to other > > > hypervisors. > > > > > > > > > Repositories > > > > > > Kernel: https://github.com/01org/igvtg-kernel (2015q3-3.18.0 branch) > > > Xen: https://github.com/01org/igvtg-xen (2015q3-4.5 branch) > > > Qemu: https://github.com/01org/igvtg-qemu (xengt_public2015q3 branch) > > > > > > > > > This update consists of: > > > > > > - XenGT is now merged with KVMGT in unified repositories(kernel and qemu), but > > currently > > > different branches for qemu. XenGT and KVMGT share same iGVT-g core logic. > > > > Hi! > > > > At redhat we've been thinking about how to support vGPUs from multiple > > vendors in a common way within QEMU. We want to enable code sharing > > between vendors and give new vendors an easy path to add their own > > support. We also have the complication that not all vGPU vendors are as > > open source friendly as Intel, so being able to abstract the device > > mediation and access outside of QEMU is a big advantage. > > > > The proposal I'd like to make is that a vGPU, whether it is from Intel > > or another vendor, is predominantly a PCI(e) device. We have an > > interface in QEMU already for exposing arbitrary PCI devices, vfio-pci. > > Currently vfio-pci uses the VFIO API to interact with "physical" devices > > and system IOMMUs. I highlight /physical/ there because some of these > > physical devices are SR-IOV VFs, which is somewhat of a fuzzy concept, > > somewhere between fixed hardware and a virtual device implemented in > > software. That software just happens to be running on the physical > > endpoint. > > Agree. > > One clarification for rest discussion, is that we're talking about GVT-g vGPU > here which is a pure software GPU virtualization technique. GVT-d (note > some use in the text) refers to passing through the whole GPU or a specific > VF. GVT-d already falls into existing VFIO APIs nicely (though some on-going > effort to remove Intel specific platform stickness from gfx driver). :-) > > > > > vGPUs are similar, with the virtual device created at a different point, > > host software. They also rely on different IOMMU constructs, making use > > of the MMU capabilities of the GPU (GTTs and such), but really having > > similar requirements. > > One important difference between system IOMMU and GPU-MMU here. > System IOMMU is very much about translation from a DMA target > (IOVA on native, or GPA in virtualization case) to HPA. However GPU > internal MMUs is to translate from Graphics Memory Address (GMA) > to DMA target (HPA if system IOMMU is disabled, or IOVA/GPA if system > IOMMU is enabled). GMA is an internal addr space within GPU, not > exposed to Qemu and fully managed by GVT-g device model. Since it's > not a standard PCI defined resource, we don't need abstract this capability > in VFIO interface. > > > > > The proposal is therefore that GPU vendors can expose vGPUs to > > userspace, and thus to QEMU, using the VFIO API. For instance, vfio > > supports modular bus drivers and IOMMU drivers. An intel-vfio-gvt-d > > module (or extension of i915) can register as a vfio bus driver, create > > a struct device per vGPU, create an IOMMU group for that device, and > > register that device with the vfio-core. Since we don't rely on the > > system IOMMU for GVT-d vGPU assignment, another vGPU vendor driver (or > > extension of the same module) can register a "type1" compliant IOMMU > > driver into vfio-core. From the perspective of QEMU then, all of the > > existing vfio-pci code is re-used, QEMU remains largely unaware of any > > specifics of the vGPU being assigned, and the only necessary change so > > far is how QEMU traverses sysfs to find the device and thus the IOMMU > > group leading to the vfio group. > > GVT-g requires to pin guest memory and query GPA->HPA information, > upon which shadow GTTs will be updated accordingly from (GMA->GPA) > to (GMA->HPA). So yes, here a dummy or simple "type1" compliant IOMMU > can be introduced just for this requirement. > > However there's one tricky point which I'm not sure whether overall > VFIO concept will be violated. GVT-g doesn't require system IOMMU > to function, however host system may enable system IOMMU just for > hardening purpose. This means two-level translations existing (GMA-> > IOVA->HPA), so the dummy IOMMU driver has to request system IOMMU > driver to allocate IOVA for VMs and then setup IOVA->HPA mapping > in IOMMU page table. In this case, multiple VM's translations are > multiplexed in one IOMMU page table. > > We might need create some group/sub-group or parent/child concepts > among those IOMMUs for thorough permission control. My thought here is that this is all abstracted through the vGPU IOMMU and device vfio backends. It's the GPU driver itself, or some vfio extension of that driver, mediating access to the device and deciding when to configure GPU MMU mappings. That driver has access to the GPA to HVA translations thanks to the type1 complaint IOMMU it implements and can pin pages as needed to create GPA to HPA mappings. That should give it all the pieces it needs to fully setup mappings for the vGPU. Whether or not there's a system IOMMU is simply an exercise for that driver. It needs to do a DMA mapping operation through the system IOMMU the same for a vGPU as if it was doing it for itself, because they are in fact one in the same. The GMA to IOVA mapping seems like an internal detail. I assume the IOVA is some sort of GPA, and the GMA is managed through mediation of the device. > > There are a few areas where we know we'll need to extend the VFIO API to > > make this work, but it seems like they can all be done generically. One > > is that PCI BARs are described through the VFIO API as regions and each > > region has a single flag describing whether mmap (ie. direct mapping) of > > that region is possible. We expect that vGPUs likely need finer > > granularity, enabling some areas within a BAR to be trapped and fowarded > > as a read or write access for the vGPU-vfio-device module to emulate, > > while other regions, like framebuffers or texture regions, are directly > > mapped. I have prototype code to enable this already. > > Yes in GVT-g one BAR resource might be partitioned among multiple vGPUs. > If VFIO can support such partial resource assignment, it'd be great. Similar > parent/child concept might also be required here, so any resource enumerated > on a vGPU shouldn't break limitations enforced on the physical device. To be clear, I'm talking about partitioning of the BAR exposed to the guest. Partitioning of the physical BAR would be managed by the vGPU vfio device driver. For instance when the guest mmap's a section of the virtual BAR, the vGPU device driver would map that to a portion of the physical device BAR. > One unique requirement for GVT-g here, though, is that vGPU device model > need to know guest BAR configuration for proper emulation (e.g. register > IO emulation handler to KVM). Similar is about guest MSI vector for virtual > interrupt injection. Not sure how this can be fit into common VFIO model. > Does VFIO allow vendor specific extension today? As a vfio device driver all config accesses and interrupt configuration would be forwarded to you, so I don't see this being a problem. > > > > Another area is that we really don't want to proliferate each vGPU > > needing a new IOMMU type within vfio. The existing type1 IOMMU provides > > potentially the most simple mapping and unmapping interface possible. > > We'd therefore need to allow multiple "type1" IOMMU drivers for vfio, > > making type1 be more of an interface specification rather than a single > > implementation. This is a trivial change to make within vfio and one > > that I believe is compatible with the existing API. Note that > > implementing a type1-compliant vfio IOMMU does not imply pinning an > > mapping every registered page. A vGPU, with mediated device access, may > > use this only to track the current HVA to GPA mappings for a VM. Only > > when a DMA is enabled for the vGPU instance is that HVA pinned and an > > HPA to GPA translation programmed into the GPU MMU. > > > > Another area of extension is how to expose a framebuffer to QEMU for > > seamless integration into a SPICE/VNC channel. For this I believe we > > could use a new region, much like we've done to expose VGA access > > through a vfio device file descriptor. An area within this new > > framebuffer region could be directly mappable in QEMU while a > > non-mappable page, at a standard location with standardized format, > > provides a description of framebuffer and potentially even a > > communication channel to synchronize framebuffer captures. This would > > be new code for QEMU, but something we could share among all vGPU > > implementations. > > Now GVT-g already provides an interface to decode framebuffer information, > w/ an assumption that the framebuffer will be further composited into > OpenGL APIs. So the format is defined according to OpenGL definition. > Does that meet SPICE requirement? > > Another thing to be added. Framebuffers are frequently switched in > reality. So either Qemu needs to poll or a notification mechanism is required. > And since it's dynamic, having framebuffer page directly exposed in the > new region might be tricky. We can just expose framebuffer information > (including base, format, etc.) and let Qemu to map separately out of VFIO > interface. Sure, we'll need to work out that interface, but it's also possible that the framebuffer region is simply remapped to another area of the device (ie. multiple interfaces mapping the same thing) by the vfio device driver. Whether it's easier to do that or make the framebuffer region reference another region is something we'll need to see. > And... this works fine with vGPU model since software knows all the > detail about framebuffer. However in pass-through case, who do you expect > to provide that information? Is it OK to introduce vGPU specific APIs in > VFIO? Yes, vGPU may have additional features, like a framebuffer area, that aren't present or optional for direct assignment. Obviously we support direct assignment of GPUs for some vendors already without this feature. > > Another obvious area to be standardized would be how to discover, > > create, and destroy vGPU instances. SR-IOV has a standard mechanism to > > create VFs in sysfs and I would propose that vGPU vendors try to > > standardize on similar interfaces to enable libvirt to easily discover > > the vGPU capabilities of a given GPU and manage the lifecycle of a vGPU > > instance. > > Now there is no standard. We expose vGPU life-cycle mgmt. APIs through > sysfs (under i915 node), which is very Intel specific. In reality different > vendors have quite different capabilities for their own vGPUs, so not sure > how standard we can define such a mechanism. But this code should be > minor to be maintained in libvirt. Every difference is a barrier. I imagine we can come up with some basic interfaces that everyone could use, even if they don't allow fine tuning every detail specific to a vendor. > > This is obviously a lot to digest, but I'd certainly be interested in > > hearing feedback on this proposal as well as try to clarify anything > > I've left out or misrepresented above. Another benefit to this > > mechanism is that direct GPU assignment and vGPU assignment use the same > > code within QEMU and same API to the kernel, which should make debugging > > and code support between the two easier. I'd really like to start a > > discussion around this proposal, and of course the first open source > > implementation of this sort of model will really help to drive the > > direction it takes. Thanks! > > > > Thanks for starting this discussion. Intel will definitely work with > community on this work. Based on earlier comments, I'm not sure > whether we can exactly same code for direct GPU assignment and > vGPU assignment, since even we extend VFIO some interfaces might > be vGPU specific. Does this way still achieve your end goal? The backends will certainly be different for vGPU vs direct assignment, but hopefully the QEMU code is almost entirely reused, modulo some features like framebuffers that are likely only to be seen on vGPU. Thanks, Alex ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <1447922452.25140.39.camel@redhat.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <1447922452.25140.39.camel@redhat.com> @ 2015-11-19 11:09 ` Paolo Bonzini [not found] ` <564DADCC.2030702@redhat.com> ` (2 subsequent siblings) 3 siblings, 0 replies; 49+ messages in thread From: Paolo Bonzini @ 2015-11-19 11:09 UTC (permalink / raw) To: Gerd Hoffmann, Tian, Kevin Cc: igvt-g, Song, Jike, Reddy, Raghuveer, qemu-devel, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Alex Williamson, Zhou, Chao, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan On 19/11/2015 09:40, Gerd Hoffmann wrote: >> > But this code should be >> > minor to be maintained in libvirt. > As far I know libvirt only needs to discover those devices. If they > look like sr/iov devices in sysfs this might work without any changes to > libvirt. I don't think they will look like SR/IOV devices. The interface may look a little like the sysfs interface that GVT-g is already using. However, it should at least be extended to support multiple vGPUs in a single VM. This might not be possible for Intel integrated graphics, but it should definitely be possible for discrete graphics cards. Another nit is that the VM id should probably be replaced by a UUID (because it's too easy to stumble on an existing VM id), assuming a VM id is needed at all. Paolo ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <564DADCC.2030702@redhat.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <564DADCC.2030702@redhat.com> @ 2015-11-20 2:46 ` Jike Song 0 siblings, 0 replies; 49+ messages in thread From: Jike Song @ 2015-11-20 2:46 UTC (permalink / raw) To: Paolo Bonzini Cc: igvt-g, Tian, Kevin, Reddy, Raghuveer, qemu-devel, Lv, Zhiyuan, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Alex Williamson, Gerd Hoffmann, Zhu, Libo, Wang, Hongbo, Zhou, Chao On 11/19/2015 07:09 PM, Paolo Bonzini wrote: > On 19/11/2015 09:40, Gerd Hoffmann wrote: >>>> But this code should be >>>> minor to be maintained in libvirt. >> As far I know libvirt only needs to discover those devices. If they >> look like sr/iov devices in sysfs this might work without any changes to >> libvirt. > > I don't think they will look like SR/IOV devices. > > The interface may look a little like the sysfs interface that GVT-g is > already using. However, it should at least be extended to support > multiple vGPUs in a single VM. This might not be possible for Intel > integrated graphics, but it should definitely be possible for discrete > graphics cards. Didn't hear about multiple vGPUs for a single VM before. Yes If we expect same vGPU interfaces for different vendors, abstraction and vendor specific stuff should be implemented. > Another nit is that the VM id should probably be replaced by a UUID > (because it's too easy to stumble on an existing VM id), assuming a VM > id is needed at all. For the last assumption, yes, a VM id is not necessary for gvt-g, it's only a temporary implementation. As long as libvirt is used, UUID should be enough for gvt-g. However, UUID is not mandatory? What should we do if user don't specify an UUID in QEMU cmdline? > > Paolo > -- Thanks, Jike ^ permalink raw reply [flat|nested] 49+ messages in thread
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <1447922452.25140.39.camel@redhat.com> 2015-11-19 11:09 ` Paolo Bonzini [not found] ` <564DADCC.2030702@redhat.com> @ 2015-11-20 6:12 ` Tian, Kevin [not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F717718@SHSMSX101.ccr.corp.intel.com> 3 siblings, 0 replies; 49+ messages in thread From: Tian, Kevin @ 2015-11-20 6:12 UTC (permalink / raw) To: Gerd Hoffmann Cc: igvt-g, Song, Jike, Reddy, Raghuveer, qemu-devel, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Alex Williamson, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan > From: Gerd Hoffmann [mailto:kraxel@redhat.com] > Sent: Thursday, November 19, 2015 4:41 PM > > Hi, > > > > Another area of extension is how to expose a framebuffer to QEMU for > > > seamless integration into a SPICE/VNC channel. For this I believe we > > > could use a new region, much like we've done to expose VGA access > > > through a vfio device file descriptor. An area within this new > > > framebuffer region could be directly mappable in QEMU while a > > > non-mappable page, at a standard location with standardized format, > > > provides a description of framebuffer and potentially even a > > > communication channel to synchronize framebuffer captures. This would > > > be new code for QEMU, but something we could share among all vGPU > > > implementations. > > > > Now GVT-g already provides an interface to decode framebuffer information, > > w/ an assumption that the framebuffer will be further composited into > > OpenGL APIs. > > Can I have a pointer to docs / code? > > iGVT-g_Setup_Guide.txt mentions a "Indirect Display Mode", but doesn't > explain how the guest framebuffer can be accessed then. You can check "fb_decoder.h". One thing to clarify. Its format is actually based on drm definition, instead of OpenGL. Sorry for that. > > > So the format is defined according to OpenGL definition. > > Does that meet SPICE requirement? > > Yes and no ;) > > Some more background: We basically have two rendering paths in qemu. > The classic one, without opengl, and a new, still emerging one, using > opengl and dma-bufs (gtk support merged for qemu 2.5, sdl2 support will > land in 2.6, spice support still WIP, hopefully 2.6 too). For best > performance you probably want use the new opengl-based rendering > whenever possible. However I do *not* expect the classic rendering path > disappear, we'll continue to need that in various cases, most prominent > one being vnc support. > > So, for non-opengl rendering qemu needs the guest framebuffer data so it > can feed it into the vnc server. The vfio framebuffer region is meant > to support this use case. what's the format requirement on that framebuffer? If you are familiar with Intel Graphics, there's a so-called tiling feature applied on frame buffer so it can't be used as a raw input to vnc server. w/o opengl you need do some conversion on CPU first. > > > Another thing to be added. Framebuffers are frequently switched in > > reality. So either Qemu needs to poll or a notification mechanism is required. > > The idea is to have qemu poll (and adapt poll rate, i.e. without vnc > client connected qemu will poll alot less frequently). > > > And since it's dynamic, having framebuffer page directly exposed in the > > new region might be tricky. We can just expose framebuffer information > > (including base, format, etc.) and let Qemu to map separately out of VFIO > > interface. > > Allocate some memory, ask gpu to blit the guest framebuffer there, i.e. > provide a snapshot of the current guest display instead of playing > mapping tricks? yes it works but better to be completed in user level. > > > And... this works fine with vGPU model since software knows all the > > detail about framebuffer. However in pass-through case, who do you expect > > to provide that information? Is it OK to introduce vGPU specific APIs in > > VFIO? > > It will only be used in the vgpu case, not for pass-though. > > We think it is better to extend the vfio interface to improve vgpu > support rather than inventing something new while vfio can satisfy 90% > of the vgpu needs already. We want avoid vendor-specific extensions > though, the vgpu extension should work across vendors. it's fine, as long as vgpu specific interface is allowed. :-) > > > Now there is no standard. We expose vGPU life-cycle mgmt. APIs through > > sysfs (under i915 node), which is very Intel specific. In reality different > > vendors have quite different capabilities for their own vGPUs, so not sure > > how standard we can define such a mechanism. > > Agree when it comes to create vGPU instances. > > > But this code should be > > minor to be maintained in libvirt. > > As far I know libvirt only needs to discover those devices. If they > look like sr/iov devices in sysfs this might work without any changes to > libvirt. > > cheers, > Gerd > ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <AADFC41AFE54684AB9EE6CBC0274A5D15F717718@SHSMSX101.ccr.corp.intel.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F717718@SHSMSX101.ccr.corp.intel.com> @ 2015-11-20 8:26 ` Gerd Hoffmann [not found] ` <1448007960.6904.22.camel@redhat.com> 1 sibling, 0 replies; 49+ messages in thread From: Gerd Hoffmann @ 2015-11-20 8:26 UTC (permalink / raw) To: Tian, Kevin Cc: igvt-g, Song, Jike, Reddy, Raghuveer, qemu-devel, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Alex Williamson, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan Hi, > > iGVT-g_Setup_Guide.txt mentions a "Indirect Display Mode", but doesn't > > explain how the guest framebuffer can be accessed then. > > You can check "fb_decoder.h". One thing to clarify. Its format is > actually based on drm definition, instead of OpenGL. Sorry for > that. drm is fine. That header explains the format, but not how it can be accessed. Is the guest fb exported as dma-buf? > > So, for non-opengl rendering qemu needs the guest framebuffer data so it > > can feed it into the vnc server. The vfio framebuffer region is meant > > to support this use case. > > what's the format requirement on that framebuffer? If you are familiar > with Intel Graphics, there's a so-called tiling feature applied on frame > buffer so it can't be used as a raw input to vnc server. w/o opengl you > need do some conversion on CPU first. Yes, that conversion needs to happen, qemu can't deal with tiled graphics. Anything which pixman can handle will work. Prefered would be PIXMAN_x8r8g8b8 (aka DRM_FORMAT_XRGB8888 on little endian host) which is the format used by the vnc server (and other places in qemu) internally. qemu can also use the opengl texture for the guest fb, then fetch the data with glReadPixels(). Which will probably do exactly the same conversion. But it'll add a opengl dependency to the non-opengl rendering path in qemu, would be nice if we can avoid that. While being at it: When importing a dma-buf with a tiled framebuffer into opengl (via eglCreateImageKHR + EGL_LINUX_DMA_BUF_EXT) I suspect we have to pass in the tile size as attribute to make it work. Is that correct? cheers, Gerd ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <1448007960.6904.22.camel@redhat.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <1448007960.6904.22.camel@redhat.com> @ 2015-11-20 8:36 ` Tian, Kevin [not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F717B17@SHSMSX101.ccr.corp.intel.com> ` (2 subsequent siblings) 3 siblings, 0 replies; 49+ messages in thread From: Tian, Kevin @ 2015-11-20 8:36 UTC (permalink / raw) To: Gerd Hoffmann Cc: igvt-g, Song, Jike, Reddy, Raghuveer, qemu-devel, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Alex Williamson, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan > From: Gerd Hoffmann [mailto:kraxel@redhat.com] > Sent: Friday, November 20, 2015 4:26 PM > > Hi, > > > > iGVT-g_Setup_Guide.txt mentions a "Indirect Display Mode", but doesn't > > > explain how the guest framebuffer can be accessed then. > > > > You can check "fb_decoder.h". One thing to clarify. Its format is > > actually based on drm definition, instead of OpenGL. Sorry for > > that. > > drm is fine. That header explains the format, but not how it can be > accessed. Is the guest fb exported as dma-buf? Currently not, but per our previous discussion we should move to use dma-buf. We have some demo code in user space. Not sure whether they're public now. Jike could you help do a check? > > > > So, for non-opengl rendering qemu needs the guest framebuffer data so it > > > can feed it into the vnc server. The vfio framebuffer region is meant > > > to support this use case. > > > > what's the format requirement on that framebuffer? If you are familiar > > with Intel Graphics, there's a so-called tiling feature applied on frame > > buffer so it can't be used as a raw input to vnc server. w/o opengl you > > need do some conversion on CPU first. > > Yes, that conversion needs to happen, qemu can't deal with tiled > graphics. Anything which pixman can handle will work. Prefered would > be PIXMAN_x8r8g8b8 (aka DRM_FORMAT_XRGB8888 on little endian host) which > is the format used by the vnc server (and other places in qemu) > internally. > > qemu can also use the opengl texture for the guest fb, then fetch the > data with glReadPixels(). Which will probably do exactly the same > conversion. But it'll add a opengl dependency to the non-opengl > rendering path in qemu, would be nice if we can avoid that. > > While being at it: When importing a dma-buf with a tiled framebuffer > into opengl (via eglCreateImageKHR + EGL_LINUX_DMA_BUF_EXT) I suspect we > have to pass in the tile size as attribute to make it work. Is that > correct? > I'd guess so, but need double confirm later when reaching that level of detail. some homework on dma-buf is required first. :-) Thanks Kevin ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <AADFC41AFE54684AB9EE6CBC0274A5D15F717B17@SHSMSX101.ccr.corp.intel.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F717B17@SHSMSX101.ccr.corp.intel.com> @ 2015-11-20 8:46 ` Zhiyuan Lv 0 siblings, 0 replies; 49+ messages in thread From: Zhiyuan Lv @ 2015-11-20 8:46 UTC (permalink / raw) To: Tian, Kevin, Gerd Hoffmann Cc: igvt-g, Song, Jike, Reddy, Raghuveer, qemu-devel, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Alex Williamson, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo On Fri, Nov 20, 2015 at 04:36:15PM +0800, Tian, Kevin wrote: > > From: Gerd Hoffmann [mailto:kraxel@redhat.com] > > Sent: Friday, November 20, 2015 4:26 PM > > > > Hi, > > > > > > iGVT-g_Setup_Guide.txt mentions a "Indirect Display Mode", but doesn't > > > > explain how the guest framebuffer can be accessed then. > > > > > > You can check "fb_decoder.h". One thing to clarify. Its format is > > > actually based on drm definition, instead of OpenGL. Sorry for > > > that. > > > > drm is fine. That header explains the format, but not how it can be > > accessed. Is the guest fb exported as dma-buf? > > Currently not, but per our previous discussion we should move to use > dma-buf. We have some demo code in user space. Not sure whether > they're public now. Jike could you help do a check? Our current implementation did not use dma-buf yet, still based on DRM_FLINK interface. We will switch to dma-buf. Thanks! Regards, -Zhiyuan > > > > > > > So, for non-opengl rendering qemu needs the guest framebuffer data so it > > > > can feed it into the vnc server. The vfio framebuffer region is meant > > > > to support this use case. > > > > > > what's the format requirement on that framebuffer? If you are familiar > > > with Intel Graphics, there's a so-called tiling feature applied on frame > > > buffer so it can't be used as a raw input to vnc server. w/o opengl you > > > need do some conversion on CPU first. > > > > Yes, that conversion needs to happen, qemu can't deal with tiled > > graphics. Anything which pixman can handle will work. Prefered would > > be PIXMAN_x8r8g8b8 (aka DRM_FORMAT_XRGB8888 on little endian host) which > > is the format used by the vnc server (and other places in qemu) > > internally. > > > > qemu can also use the opengl texture for the guest fb, then fetch the > > data with glReadPixels(). Which will probably do exactly the same > > conversion. But it'll add a opengl dependency to the non-opengl > > rendering path in qemu, would be nice if we can avoid that. > > > > While being at it: When importing a dma-buf with a tiled framebuffer > > into opengl (via eglCreateImageKHR + EGL_LINUX_DMA_BUF_EXT) I suspect we > > have to pass in the tile size as attribute to make it work. Is that > > correct? > > > > I'd guess so, but need double confirm later when reaching that level of detail. > some homework on dma-buf is required first. :-) > > Thanks > Kevin ^ permalink raw reply [flat|nested] 49+ messages in thread
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <1448007960.6904.22.camel@redhat.com> 2015-11-20 8:36 ` Tian, Kevin [not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F717B17@SHSMSX101.ccr.corp.intel.com> @ 2015-12-03 6:57 ` Tian, Kevin [not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F72B52A@SHSMSX101.ccr.corp.intel.com> 3 siblings, 0 replies; 49+ messages in thread From: Tian, Kevin @ 2015-12-03 6:57 UTC (permalink / raw) To: Gerd Hoffmann Cc: igvt-g, Song, Jike, Reddy, Raghuveer, qemu-devel, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Alex Williamson, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan > From: Tian, Kevin > Sent: Friday, November 20, 2015 4:36 PM > > > > > > > So, for non-opengl rendering qemu needs the guest framebuffer data so it > > > > can feed it into the vnc server. The vfio framebuffer region is meant > > > > to support this use case. > > > > > > what's the format requirement on that framebuffer? If you are familiar > > > with Intel Graphics, there's a so-called tiling feature applied on frame > > > buffer so it can't be used as a raw input to vnc server. w/o opengl you > > > need do some conversion on CPU first. > > > > Yes, that conversion needs to happen, qemu can't deal with tiled > > graphics. Anything which pixman can handle will work. Prefered would > > be PIXMAN_x8r8g8b8 (aka DRM_FORMAT_XRGB8888 on little endian host) which > > is the format used by the vnc server (and other places in qemu) > > internally. Now the format is reported based on guest setting. Some agent needs to do format conversion in user space. > > > > qemu can also use the opengl texture for the guest fb, then fetch the > > data with glReadPixels(). Which will probably do exactly the same > > conversion. But it'll add a opengl dependency to the non-opengl > > rendering path in qemu, would be nice if we can avoid that. > > > > While being at it: When importing a dma-buf with a tiled framebuffer > > into opengl (via eglCreateImageKHR + EGL_LINUX_DMA_BUF_EXT) I suspect we > > have to pass in the tile size as attribute to make it work. Is that > > correct? > > > > I'd guess so, but need double confirm later when reaching that level of detail. > some homework on dma-buf is required first. :-) > btw some questions here: for non-gl and gl rendering in Qemu, are they based on dma-buf already? once we can export guest framebuffer in dma-buf, is there additional work required or just straightforward to integrate with SPICE? Thanks Kevin ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <AADFC41AFE54684AB9EE6CBC0274A5D15F72B52A@SHSMSX101.ccr.corp.intel.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F72B52A@SHSMSX101.ccr.corp.intel.com> @ 2015-12-04 10:13 ` Gerd Hoffmann 0 siblings, 0 replies; 49+ messages in thread From: Gerd Hoffmann @ 2015-12-04 10:13 UTC (permalink / raw) To: Tian, Kevin Cc: igvt-g, Song, Jike, Reddy, Raghuveer, qemu-devel, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Alex Williamson, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan Hi, > btw some questions here: > > for non-gl and gl rendering in Qemu, are they based on dma-buf already? > once we can export guest framebuffer in dma-buf, is there additional work > required or just straightforward to integrate with SPICE? Right now we are busy integrating dma-buf support into spice, which will be used for the gl rendering path, for virtio-gpu. For intel-vgpu the wireup inside qemu will be slightly different: We'll get a dma-buf handle from the igd driver, whereas virtio-gpu renders into a texture, then exports that texture as dma-buf. But in both cases we'll go pass the dma-buf with the guest framebuffer (and meta-data such as fourcc and size) to spice-server, which in turn will pass on the dma-buf to spice-client for (local) display. So we have a common code path in spice for both virtio-gpu and intel-vgpu, based on dma-bufs. spice-server even doesn't need to know what kind of graphics device the guest has, it'll go just process the dma-bufs. longer-term we also plan to support video-encoding for a remote display. Again based on dma-bufs, by sending them to the gpu video encoder. The non-gl rendering path needs to be figured out. With virtio-gpu we'll go simply turn off 3d support, so the guest will fallback to do software rendering, we'll get a classic DisplaySurface and the vnc server can work with that. That isn't going to fly with intel-vgpu though, so we need something else. Import dma-buf, then glReadPixels into a DisplaySurface would work. But as mentioned before I'd prefer a code path which doesn't require opengl support in qemu, and one option for that would be the special vfio region. I've written up a quick draft meanwhile: diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h index 751b69f..91b928d 100644 --- a/include/uapi/linux/vfio.h +++ b/include/uapi/linux/vfio.h @@ -596,6 +596,28 @@ struct vfio_iommu_spapr_tce_remove { }; #define VFIO_IOMMU_SPAPR_TCE_REMOVE _IO(VFIO_TYPE, VFIO_BASE + 20) +/* -------- Additional API for vGPU -------- */ + +/* + * framebuffer meta data + * subregion located at the end of the framebuffer region + */ +struct vfio_framebuffer { + __u32 argsz; + + /* out */ + __u32 format; /* drm fourcc */ + __u32 offset; /* relative to region start */ + __u32 width; /* in pixels */ + __u32 height; /* in pixels */ + __u32 stride; /* in bytes */ + + /* in+out */ +#define VFIO_FB_STATE_REQUEST_UPDATE 1 /* userspace requests update */ +#define VFIO_FB_STATE_UPDATE_COMPLETE 2 /* kernel signals completion */ + __u32 state; /* VFIO_FB_STATE_ */ +}; + /* ***************************************************************** */ #endif /* _UAPIVFIO_H */ cheers, Gerd ^ permalink raw reply related [flat|nested] 49+ messages in thread
[parent not found: <1447963356.4697.184.camel@redhat.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <1447963356.4697.184.camel@redhat.com> @ 2015-11-20 7:09 ` Tian, Kevin 2015-11-20 8:10 ` Tian, Kevin ` (4 subsequent siblings) 5 siblings, 0 replies; 49+ messages in thread From: Tian, Kevin @ 2015-11-20 7:09 UTC (permalink / raw) To: Alex Williamson Cc: igvt-g, Song, Jike, Reddy, Raghuveer, qemu-devel, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Gerd Hoffmann, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan > From: Alex Williamson [mailto:alex.williamson@redhat.com] > Sent: Friday, November 20, 2015 4:03 AM > > > > > > > The proposal is therefore that GPU vendors can expose vGPUs to > > > userspace, and thus to QEMU, using the VFIO API. For instance, vfio > > > supports modular bus drivers and IOMMU drivers. An intel-vfio-gvt-d > > > module (or extension of i915) can register as a vfio bus driver, create > > > a struct device per vGPU, create an IOMMU group for that device, and > > > register that device with the vfio-core. Since we don't rely on the > > > system IOMMU for GVT-d vGPU assignment, another vGPU vendor driver (or > > > extension of the same module) can register a "type1" compliant IOMMU > > > driver into vfio-core. From the perspective of QEMU then, all of the > > > existing vfio-pci code is re-used, QEMU remains largely unaware of any > > > specifics of the vGPU being assigned, and the only necessary change so > > > far is how QEMU traverses sysfs to find the device and thus the IOMMU > > > group leading to the vfio group. > > > > GVT-g requires to pin guest memory and query GPA->HPA information, > > upon which shadow GTTs will be updated accordingly from (GMA->GPA) > > to (GMA->HPA). So yes, here a dummy or simple "type1" compliant IOMMU > > can be introduced just for this requirement. > > > > However there's one tricky point which I'm not sure whether overall > > VFIO concept will be violated. GVT-g doesn't require system IOMMU > > to function, however host system may enable system IOMMU just for > > hardening purpose. This means two-level translations existing (GMA-> > > IOVA->HPA), so the dummy IOMMU driver has to request system IOMMU > > driver to allocate IOVA for VMs and then setup IOVA->HPA mapping > > in IOMMU page table. In this case, multiple VM's translations are > > multiplexed in one IOMMU page table. > > > > We might need create some group/sub-group or parent/child concepts > > among those IOMMUs for thorough permission control. > > My thought here is that this is all abstracted through the vGPU IOMMU > and device vfio backends. It's the GPU driver itself, or some vfio > extension of that driver, mediating access to the device and deciding > when to configure GPU MMU mappings. That driver has access to the GPA > to HVA translations thanks to the type1 complaint IOMMU it implements > and can pin pages as needed to create GPA to HPA mappings. That should > give it all the pieces it needs to fully setup mappings for the vGPU. > Whether or not there's a system IOMMU is simply an exercise for that > driver. It needs to do a DMA mapping operation through the system IOMMU > the same for a vGPU as if it was doing it for itself, because they are > in fact one in the same. The GMA to IOVA mapping seems like an internal > detail. I assume the IOVA is some sort of GPA, and the GMA is managed > through mediation of the device. Sorry I'm not familiar with VFIO internal. My original worry is that system IOMMU for GPU may be already claimed by another vfio driver (e.g. host kernel wants to harden gfx driver from rest sub-systems, regardless of whether vGPU is created or not). In that case vGPU IOMMU driver shouldn't manage system IOMMU directly. btw, curious today how VFIO coordinates with system IOMMU driver regarding to whether a IOMMU is used to control device assignment, or used for kernel hardening. Somehow two are conflicting since different address spaces are concerned (GPA vs. IOVA)... > > > > > There are a few areas where we know we'll need to extend the VFIO API to > > > make this work, but it seems like they can all be done generically. One > > > is that PCI BARs are described through the VFIO API as regions and each > > > region has a single flag describing whether mmap (ie. direct mapping) of > > > that region is possible. We expect that vGPUs likely need finer > > > granularity, enabling some areas within a BAR to be trapped and fowarded > > > as a read or write access for the vGPU-vfio-device module to emulate, > > > while other regions, like framebuffers or texture regions, are directly > > > mapped. I have prototype code to enable this already. > > > > Yes in GVT-g one BAR resource might be partitioned among multiple vGPUs. > > If VFIO can support such partial resource assignment, it'd be great. Similar > > parent/child concept might also be required here, so any resource enumerated > > on a vGPU shouldn't break limitations enforced on the physical device. > > To be clear, I'm talking about partitioning of the BAR exposed to the > guest. Partitioning of the physical BAR would be managed by the vGPU > vfio device driver. For instance when the guest mmap's a section of the > virtual BAR, the vGPU device driver would map that to a portion of the > physical device BAR. > > > One unique requirement for GVT-g here, though, is that vGPU device model > > need to know guest BAR configuration for proper emulation (e.g. register > > IO emulation handler to KVM). Similar is about guest MSI vector for virtual > > interrupt injection. Not sure how this can be fit into common VFIO model. > > Does VFIO allow vendor specific extension today? > > As a vfio device driver all config accesses and interrupt configuration > would be forwarded to you, so I don't see this being a problem. Sure, nice to know that. Thanks Kevin ^ permalink raw reply [flat|nested] 49+ messages in thread
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <1447963356.4697.184.camel@redhat.com> 2015-11-20 7:09 ` Tian, Kevin @ 2015-11-20 8:10 ` Tian, Kevin [not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F717855@SHSMSX101.ccr.corp.intel.com> ` (3 subsequent siblings) 5 siblings, 0 replies; 49+ messages in thread From: Tian, Kevin @ 2015-11-20 8:10 UTC (permalink / raw) To: Alex Williamson Cc: igvt-g, Song, Jike, Reddy, Raghuveer, qemu-devel, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Gerd Hoffmann, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan > From: Tian, Kevin > Sent: Friday, November 20, 2015 3:10 PM > > > > > > > > The proposal is therefore that GPU vendors can expose vGPUs to > > > > userspace, and thus to QEMU, using the VFIO API. For instance, vfio > > > > supports modular bus drivers and IOMMU drivers. An intel-vfio-gvt-d > > > > module (or extension of i915) can register as a vfio bus driver, create > > > > a struct device per vGPU, create an IOMMU group for that device, and > > > > register that device with the vfio-core. Since we don't rely on the > > > > system IOMMU for GVT-d vGPU assignment, another vGPU vendor driver (or > > > > extension of the same module) can register a "type1" compliant IOMMU > > > > driver into vfio-core. From the perspective of QEMU then, all of the > > > > existing vfio-pci code is re-used, QEMU remains largely unaware of any > > > > specifics of the vGPU being assigned, and the only necessary change so > > > > far is how QEMU traverses sysfs to find the device and thus the IOMMU > > > > group leading to the vfio group. > > > > > > GVT-g requires to pin guest memory and query GPA->HPA information, > > > upon which shadow GTTs will be updated accordingly from (GMA->GPA) > > > to (GMA->HPA). So yes, here a dummy or simple "type1" compliant IOMMU > > > can be introduced just for this requirement. > > > > > > However there's one tricky point which I'm not sure whether overall > > > VFIO concept will be violated. GVT-g doesn't require system IOMMU > > > to function, however host system may enable system IOMMU just for > > > hardening purpose. This means two-level translations existing (GMA-> > > > IOVA->HPA), so the dummy IOMMU driver has to request system IOMMU > > > driver to allocate IOVA for VMs and then setup IOVA->HPA mapping > > > in IOMMU page table. In this case, multiple VM's translations are > > > multiplexed in one IOMMU page table. > > > > > > We might need create some group/sub-group or parent/child concepts > > > among those IOMMUs for thorough permission control. > > > > My thought here is that this is all abstracted through the vGPU IOMMU > > and device vfio backends. It's the GPU driver itself, or some vfio > > extension of that driver, mediating access to the device and deciding > > when to configure GPU MMU mappings. That driver has access to the GPA > > to HVA translations thanks to the type1 complaint IOMMU it implements > > and can pin pages as needed to create GPA to HPA mappings. That should > > give it all the pieces it needs to fully setup mappings for the vGPU. > > Whether or not there's a system IOMMU is simply an exercise for that > > driver. It needs to do a DMA mapping operation through the system IOMMU > > the same for a vGPU as if it was doing it for itself, because they are > > in fact one in the same. The GMA to IOVA mapping seems like an internal > > detail. I assume the IOVA is some sort of GPA, and the GMA is managed > > through mediation of the device. > > Sorry I'm not familiar with VFIO internal. My original worry is that system > IOMMU for GPU may be already claimed by another vfio driver (e.g. host kernel > wants to harden gfx driver from rest sub-systems, regardless of whether vGPU > is created or not). In that case vGPU IOMMU driver shouldn't manage system > IOMMU directly. > > btw, curious today how VFIO coordinates with system IOMMU driver regarding > to whether a IOMMU is used to control device assignment, or used for kernel > hardening. Somehow two are conflicting since different address spaces are > concerned (GPA vs. IOVA)... > Here is a more concrete example: KVMGT doesn't require IOMMU. All DMA targets are already replaced with HPA thru shadow GTT. So DMA requests from GPU all contain HPAs. When IOMMU is enabled, one simple approach is to have vGPU IOMMU driver configure system IOMMU with identity mapping (HPA->HPA). We can't use (GPA->HPA) since GPAs from multiple VMs are conflicting. However, we still have host gfx driver running. When IOMMU is enabled, dma_alloc_*** will return IOVA (drvers/iommu/iova.c) in host gfx driver, which will have IOVA->HPA programmed to system IOMMU. One IOMMU device entry can only translate one address space, so here comes a conflict (HPA->HPA vs. IOVA->HPA). To solve this, vGPU IOMMU driver needs to allocate IOVA from iova.c for each VM w/ vGPU assigned, and then KVMGT will program IOVA in shadow GTT accordingly. It adds one additional mapping layer (GPA->IOVA->HPA). In this way two requirements can be unified together since only IOVA->HPA mapping needs to be built. So unlike existing type1 IOMMU driver which controls IOMMU alone, vGPU IOMMU driver needs to cooperate with other agent (iova.c here) to co-manage system IOMMU. This may not impact existing VFIO framework. Just want to highlight additional work here when implementing the vGPU IOMMU driver. Thanks Kevin Thanks Kevin ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <AADFC41AFE54684AB9EE6CBC0274A5D15F717855@SHSMSX101.ccr.corp.intel.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F717855@SHSMSX101.ccr.corp.intel.com> @ 2015-11-20 17:03 ` Alex Williamson 0 siblings, 0 replies; 49+ messages in thread From: Alex Williamson @ 2015-11-20 17:03 UTC (permalink / raw) To: Tian, Kevin Cc: igvt-g, Song, Jike, Reddy, Raghuveer, qemu-devel, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Gerd Hoffmann, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan On Fri, 2015-11-20 at 07:09 +0000, Tian, Kevin wrote: > > From: Alex Williamson [mailto:alex.williamson@redhat.com] > > Sent: Friday, November 20, 2015 4:03 AM > > > > > > > > > > The proposal is therefore that GPU vendors can expose vGPUs to > > > > userspace, and thus to QEMU, using the VFIO API. For instance, vfio > > > > supports modular bus drivers and IOMMU drivers. An intel-vfio-gvt-d > > > > module (or extension of i915) can register as a vfio bus driver, create > > > > a struct device per vGPU, create an IOMMU group for that device, and > > > > register that device with the vfio-core. Since we don't rely on the > > > > system IOMMU for GVT-d vGPU assignment, another vGPU vendor driver (or > > > > extension of the same module) can register a "type1" compliant IOMMU > > > > driver into vfio-core. From the perspective of QEMU then, all of the > > > > existing vfio-pci code is re-used, QEMU remains largely unaware of any > > > > specifics of the vGPU being assigned, and the only necessary change so > > > > far is how QEMU traverses sysfs to find the device and thus the IOMMU > > > > group leading to the vfio group. > > > > > > GVT-g requires to pin guest memory and query GPA->HPA information, > > > upon which shadow GTTs will be updated accordingly from (GMA->GPA) > > > to (GMA->HPA). So yes, here a dummy or simple "type1" compliant IOMMU > > > can be introduced just for this requirement. > > > > > > However there's one tricky point which I'm not sure whether overall > > > VFIO concept will be violated. GVT-g doesn't require system IOMMU > > > to function, however host system may enable system IOMMU just for > > > hardening purpose. This means two-level translations existing (GMA-> > > > IOVA->HPA), so the dummy IOMMU driver has to request system IOMMU > > > driver to allocate IOVA for VMs and then setup IOVA->HPA mapping > > > in IOMMU page table. In this case, multiple VM's translations are > > > multiplexed in one IOMMU page table. > > > > > > We might need create some group/sub-group or parent/child concepts > > > among those IOMMUs for thorough permission control. > > > > My thought here is that this is all abstracted through the vGPU IOMMU > > and device vfio backends. It's the GPU driver itself, or some vfio > > extension of that driver, mediating access to the device and deciding > > when to configure GPU MMU mappings. That driver has access to the GPA > > to HVA translations thanks to the type1 complaint IOMMU it implements > > and can pin pages as needed to create GPA to HPA mappings. That should > > give it all the pieces it needs to fully setup mappings for the vGPU. > > Whether or not there's a system IOMMU is simply an exercise for that > > driver. It needs to do a DMA mapping operation through the system IOMMU > > the same for a vGPU as if it was doing it for itself, because they are > > in fact one in the same. The GMA to IOVA mapping seems like an internal > > detail. I assume the IOVA is some sort of GPA, and the GMA is managed > > through mediation of the device. > > Sorry I'm not familiar with VFIO internal. My original worry is that system > IOMMU for GPU may be already claimed by another vfio driver (e.g. host kernel > wants to harden gfx driver from rest sub-systems, regardless of whether vGPU > is created or not). In that case vGPU IOMMU driver shouldn't manage system > IOMMU directly. There are different APIs for the IOMMU depending on how it's being use. If the IOMMU is being used for inter-device isolation in the host, then the DMA API (ex. dma_map_page) transparently makes use of the IOMMU. When we're doing device assignment, we make use of the IOMMU API which allows more explicit control (ex. iommu_domain_alloc, iommu_attach_device, iommu_map, etc). A vGPU is not an SR-IOV VF, it doesn't have a unique requester ID that allows the IOMMU to differentiate one vGPU from another, or vGPU from GPU. All mappings for vGPUs need to occur for the GPU. It's therefore the responsibility of the GPU driver, or this vfio extension of that driver, that needs to perform the IOMMU mapping for the vGPU. My expectation is therefore that once the GMA to IOVA mapping is configured in the GPU MMU, the IOVA to HPA needs to be programmed, as if the GPU driver was performing the setup itself, which it is. Before the device mediation that triggered the mapping setup is complete, the GPU MMU and the system IOMMU (if preset) should be configured to enable that DMA. The GPU MMU provides the isolation of the vGPU, the system IOMMU enable the DMA to occur. > btw, curious today how VFIO coordinates with system IOMMU driver regarding > to whether a IOMMU is used to control device assignment, or used for kernel > hardening. Somehow two are conflicting since different address spaces are > concerned (GPA vs. IOVA)... When devices unbind from native host drivers, any previous IOMMU mappings and domains are removed. These are typically created via the DMA API above. The initialization operations of the VFIO API (creating containers, attaching groups to containers, and setting the IOMMU model for a container) work through the IOMMU API to create a new domain and isolate devices within it. The type1 VFIO IOMMU interface is then effectively a passthrough to the iommu_map() and iommu_unmap() interfaces of the IOMMU API, modulo page pinning, accounting and tracking. When a VFIO instance is destroyed, the devices are detached from the IOMMU domain, the devices are unbound from vfio and re-bound to host drivers and the DMA API can reclaim the devices for host isolation. Thanks, Alex ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <AADFC41AFE54684AB9EE6CBC0274A5D15F717951@SHSMSX101.ccr.corp.intel.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F717951@SHSMSX101.ccr.corp.intel.com> @ 2015-11-20 17:25 ` Alex Williamson [not found] ` <1448040302.4697.300.camel@redhat.com> 1 sibling, 0 replies; 49+ messages in thread From: Alex Williamson @ 2015-11-20 17:25 UTC (permalink / raw) To: Tian, Kevin Cc: igvt-g, Song, Jike, Reddy, Raghuveer, qemu-devel, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Gerd Hoffmann, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan On Fri, 2015-11-20 at 08:10 +0000, Tian, Kevin wrote: > > From: Tian, Kevin > > Sent: Friday, November 20, 2015 3:10 PM > > > > > > > > > > > The proposal is therefore that GPU vendors can expose vGPUs to > > > > > userspace, and thus to QEMU, using the VFIO API. For instance, vfio > > > > > supports modular bus drivers and IOMMU drivers. An intel-vfio-gvt-d > > > > > module (or extension of i915) can register as a vfio bus driver, create > > > > > a struct device per vGPU, create an IOMMU group for that device, and > > > > > register that device with the vfio-core. Since we don't rely on the > > > > > system IOMMU for GVT-d vGPU assignment, another vGPU vendor driver (or > > > > > extension of the same module) can register a "type1" compliant IOMMU > > > > > driver into vfio-core. From the perspective of QEMU then, all of the > > > > > existing vfio-pci code is re-used, QEMU remains largely unaware of any > > > > > specifics of the vGPU being assigned, and the only necessary change so > > > > > far is how QEMU traverses sysfs to find the device and thus the IOMMU > > > > > group leading to the vfio group. > > > > > > > > GVT-g requires to pin guest memory and query GPA->HPA information, > > > > upon which shadow GTTs will be updated accordingly from (GMA->GPA) > > > > to (GMA->HPA). So yes, here a dummy or simple "type1" compliant IOMMU > > > > can be introduced just for this requirement. > > > > > > > > However there's one tricky point which I'm not sure whether overall > > > > VFIO concept will be violated. GVT-g doesn't require system IOMMU > > > > to function, however host system may enable system IOMMU just for > > > > hardening purpose. This means two-level translations existing (GMA-> > > > > IOVA->HPA), so the dummy IOMMU driver has to request system IOMMU > > > > driver to allocate IOVA for VMs and then setup IOVA->HPA mapping > > > > in IOMMU page table. In this case, multiple VM's translations are > > > > multiplexed in one IOMMU page table. > > > > > > > > We might need create some group/sub-group or parent/child concepts > > > > among those IOMMUs for thorough permission control. > > > > > > My thought here is that this is all abstracted through the vGPU IOMMU > > > and device vfio backends. It's the GPU driver itself, or some vfio > > > extension of that driver, mediating access to the device and deciding > > > when to configure GPU MMU mappings. That driver has access to the GPA > > > to HVA translations thanks to the type1 complaint IOMMU it implements > > > and can pin pages as needed to create GPA to HPA mappings. That should > > > give it all the pieces it needs to fully setup mappings for the vGPU. > > > Whether or not there's a system IOMMU is simply an exercise for that > > > driver. It needs to do a DMA mapping operation through the system IOMMU > > > the same for a vGPU as if it was doing it for itself, because they are > > > in fact one in the same. The GMA to IOVA mapping seems like an internal > > > detail. I assume the IOVA is some sort of GPA, and the GMA is managed > > > through mediation of the device. > > > > Sorry I'm not familiar with VFIO internal. My original worry is that system > > IOMMU for GPU may be already claimed by another vfio driver (e.g. host kernel > > wants to harden gfx driver from rest sub-systems, regardless of whether vGPU > > is created or not). In that case vGPU IOMMU driver shouldn't manage system > > IOMMU directly. > > > > btw, curious today how VFIO coordinates with system IOMMU driver regarding > > to whether a IOMMU is used to control device assignment, or used for kernel > > hardening. Somehow two are conflicting since different address spaces are > > concerned (GPA vs. IOVA)... > > > > Here is a more concrete example: > > KVMGT doesn't require IOMMU. All DMA targets are already replaced with > HPA thru shadow GTT. So DMA requests from GPU all contain HPAs. > > When IOMMU is enabled, one simple approach is to have vGPU IOMMU > driver configure system IOMMU with identity mapping (HPA->HPA). We > can't use (GPA->HPA) since GPAs from multiple VMs are conflicting. > > However, we still have host gfx driver running. When IOMMU is enabled, > dma_alloc_*** will return IOVA (drvers/iommu/iova.c) in host gfx driver, > which will have IOVA->HPA programmed to system IOMMU. > > One IOMMU device entry can only translate one address space, so here > comes a conflict (HPA->HPA vs. IOVA->HPA). To solve this, vGPU IOMMU > driver needs to allocate IOVA from iova.c for each VM w/ vGPU assigned, > and then KVMGT will program IOVA in shadow GTT accordingly. It adds > one additional mapping layer (GPA->IOVA->HPA). In this way two > requirements can be unified together since only IOVA->HPA mapping > needs to be built. > > So unlike existing type1 IOMMU driver which controls IOMMU alone, vGPU > IOMMU driver needs to cooperate with other agent (iova.c here) to > co-manage system IOMMU. This may not impact existing VFIO framework. > Just want to highlight additional work here when implementing the vGPU > IOMMU driver. Right, so the existing i915 driver needs to use the DMA API and calls like dma_map_page() to enable translations through the IOMMU. With dma_map_page(), the caller provides a page address (~HPA) and is returned an IOVA. So unfortunately you don't get to take the shortcut of having an identity mapping through the IOMMU unless you want to convert i915 entirely to using the IOMMU API, because we also can't have the conflict that an HPA could overlap an IOVA for a previously mapped page. The double translation, once through the GPU MMU and once through the system IOMMU is going to happen regardless of whether we can identity map through the IOMMU. The only solution to this would be for the GPU to participate in ATS and provide pre-translated transactions from the GPU. All of this is internal to the i915 driver (or vfio extension of that driver) and needs to be done regardless of what sort of interface we're using to expose the vGPU to QEMU. It just seems like VFIO provides a convenient way of doing this since you'll have ready access to the HVA-GPA mappings for the user. I think the key points though are: * the VFIO type1 IOMMU stores GPA to HVA translations * get_user_pages() on the HVA will pin the page and give you a page * dma_map_page() receives that page, programs the system IOMMU and provides an IOVA * the GPU MMU can then be programmed with the GPA to IOVA translations Thanks, Alex ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <1448040302.4697.300.camel@redhat.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <1448040302.4697.300.camel@redhat.com> @ 2015-11-23 5:05 ` Jike Song 0 siblings, 0 replies; 49+ messages in thread From: Jike Song @ 2015-11-23 5:05 UTC (permalink / raw) To: Alex Williamson Cc: igvt-g, Tian, Kevin, Reddy, Raghuveer, qemu-devel, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Gerd Hoffmann, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo, Lv, Zhiyuan On 11/21/2015 01:25 AM, Alex Williamson wrote: > On Fri, 2015-11-20 at 08:10 +0000, Tian, Kevin wrote: >> >> Here is a more concrete example: >> >> KVMGT doesn't require IOMMU. All DMA targets are already replaced with >> HPA thru shadow GTT. So DMA requests from GPU all contain HPAs. >> >> When IOMMU is enabled, one simple approach is to have vGPU IOMMU >> driver configure system IOMMU with identity mapping (HPA->HPA). We >> can't use (GPA->HPA) since GPAs from multiple VMs are conflicting. >> >> However, we still have host gfx driver running. When IOMMU is enabled, >> dma_alloc_*** will return IOVA (drvers/iommu/iova.c) in host gfx driver, >> which will have IOVA->HPA programmed to system IOMMU. >> >> One IOMMU device entry can only translate one address space, so here >> comes a conflict (HPA->HPA vs. IOVA->HPA). To solve this, vGPU IOMMU >> driver needs to allocate IOVA from iova.c for each VM w/ vGPU assigned, >> and then KVMGT will program IOVA in shadow GTT accordingly. It adds >> one additional mapping layer (GPA->IOVA->HPA). In this way two >> requirements can be unified together since only IOVA->HPA mapping >> needs to be built. >> >> So unlike existing type1 IOMMU driver which controls IOMMU alone, vGPU >> IOMMU driver needs to cooperate with other agent (iova.c here) to >> co-manage system IOMMU. This may not impact existing VFIO framework. >> Just want to highlight additional work here when implementing the vGPU >> IOMMU driver. > > Right, so the existing i915 driver needs to use the DMA API and calls > like dma_map_page() to enable translations through the IOMMU. With > dma_map_page(), the caller provides a page address (~HPA) and is > returned an IOVA. So unfortunately you don't get to take the shortcut > of having an identity mapping through the IOMMU unless you want to > convert i915 entirely to using the IOMMU API, because we also can't have > the conflict that an HPA could overlap an IOVA for a previously mapped > page. > > The double translation, once through the GPU MMU and once through the > system IOMMU is going to happen regardless of whether we can identity > map through the IOMMU. The only solution to this would be for the GPU > to participate in ATS and provide pre-translated transactions from the > GPU. All of this is internal to the i915 driver (or vfio extension of > that driver) and needs to be done regardless of what sort of interface > we're using to expose the vGPU to QEMU. It just seems like VFIO > provides a convenient way of doing this since you'll have ready access > to the HVA-GPA mappings for the user. > > I think the key points though are: > > * the VFIO type1 IOMMU stores GPA to HVA translations > * get_user_pages() on the HVA will pin the page and give you a > page > * dma_map_page() receives that page, programs the system IOMMU and > provides an IOVA > * the GPU MMU can then be programmed with the GPA to IOVA > translations Thanks for such a nice example! I'll do my home work and get back to you shortly :) > > Thanks, > Alex > -- Thanks, Jike ^ permalink raw reply [flat|nested] 49+ messages in thread
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <1447963356.4697.184.camel@redhat.com> ` (3 preceding siblings ...) [not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F717951@SHSMSX101.ccr.corp.intel.com> @ 2015-11-24 11:19 ` Daniel Vetter [not found] ` <20151124111917.GO17050@phenom.ffwll.local> 5 siblings, 0 replies; 49+ messages in thread From: Daniel Vetter @ 2015-11-24 11:19 UTC (permalink / raw) To: Alex Williamson Cc: igvt-g, Tian, Kevin, Li, Susie, qemu-devel, White, Michael L, Dong, Eddie, intel-gfx, Reddy, Raghuveer, Cowperthwaite, David J, linux-kernel, xen-devel, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo On Thu, Nov 19, 2015 at 01:02:36PM -0700, Alex Williamson wrote: > On Thu, 2015-11-19 at 04:06 +0000, Tian, Kevin wrote: > > > From: Alex Williamson [mailto:alex.williamson@redhat.com] > > > Sent: Thursday, November 19, 2015 2:12 AM > > > > > > [cc +qemu-devel, +paolo, +gerd] > > > > > > Another area of extension is how to expose a framebuffer to QEMU for > > > seamless integration into a SPICE/VNC channel. For this I believe we > > > could use a new region, much like we've done to expose VGA access > > > through a vfio device file descriptor. An area within this new > > > framebuffer region could be directly mappable in QEMU while a > > > non-mappable page, at a standard location with standardized format, > > > provides a description of framebuffer and potentially even a > > > communication channel to synchronize framebuffer captures. This would > > > be new code for QEMU, but something we could share among all vGPU > > > implementations. > > > > Now GVT-g already provides an interface to decode framebuffer information, > > w/ an assumption that the framebuffer will be further composited into > > OpenGL APIs. So the format is defined according to OpenGL definition. > > Does that meet SPICE requirement? > > > > Another thing to be added. Framebuffers are frequently switched in > > reality. So either Qemu needs to poll or a notification mechanism is required. > > And since it's dynamic, having framebuffer page directly exposed in the > > new region might be tricky. We can just expose framebuffer information > > (including base, format, etc.) and let Qemu to map separately out of VFIO > > interface. > > Sure, we'll need to work out that interface, but it's also possible that > the framebuffer region is simply remapped to another area of the device > (ie. multiple interfaces mapping the same thing) by the vfio device > driver. Whether it's easier to do that or make the framebuffer region > reference another region is something we'll need to see. > > > And... this works fine with vGPU model since software knows all the > > detail about framebuffer. However in pass-through case, who do you expect > > to provide that information? Is it OK to introduce vGPU specific APIs in > > VFIO? > > Yes, vGPU may have additional features, like a framebuffer area, that > aren't present or optional for direct assignment. Obviously we support > direct assignment of GPUs for some vendors already without this feature. For exposing framebuffers for spice/vnc I highly recommend against anything that looks like a bar/fixed mmio range mapping. First this means the kernel driver needs to internally fake remapping, which isn't fun. Second we can't get at the memory in an easy fashion for hw-accelerated compositing. My recoomendation is to build the actual memory access for underlying framebuffers on top of dma-buf, so that it can be vacuumed up by e.g. the host gpu driver again for rendering. For userspace the generic part would simply be an invalidate-fb signal, with the new dma-buf supplied. Upsides: - You can composit stuff with the gpu. - VRAM and other kinds of resources (even stuff not visible in pci bars) can be represented. Downside: Tracking mapping changes on the guest side won't be any easier. This is mostly a problem for integrated gpus, since discrete ones usually require contiguous vram for scanout. I think saying "don't do that" is a valid option though, i.e. we're assuming that page mappings for a in-use scanout range never changes on the guest side. That is true for at least all the current linux drivers. -Daniel -- Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <20151124111917.GO17050@phenom.ffwll.local>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <20151124111917.GO17050@phenom.ffwll.local> @ 2015-11-24 11:49 ` Chris Wilson 2015-11-24 12:38 ` Gerd Hoffmann [not found] ` <1448368735.27648.110.camel@redhat.com> 2 siblings, 0 replies; 49+ messages in thread From: Chris Wilson @ 2015-11-24 11:49 UTC (permalink / raw) To: Alex Williamson, Tian, Kevin, igvt-g, Reddy, Raghuveer, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, qemu-devel, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo On Tue, Nov 24, 2015 at 12:19:18PM +0100, Daniel Vetter wrote: > Downside: Tracking mapping changes on the guest side won't be any easier. > This is mostly a problem for integrated gpus, since discrete ones usually > require contiguous vram for scanout. I think saying "don't do that" is a > valid option though, i.e. we're assuming that page mappings for a in-use > scanout range never changes on the guest side. That is true for at least > all the current linux drivers. Apart from we already suffer limitations of fixed mappings and have patches that want to change the page mapping of active scanouts. -Chris -- Chris Wilson, Intel Open Source Technology Centre ^ permalink raw reply [flat|nested] 49+ messages in thread
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <20151124111917.GO17050@phenom.ffwll.local> 2015-11-24 11:49 ` Chris Wilson @ 2015-11-24 12:38 ` Gerd Hoffmann [not found] ` <1448368735.27648.110.camel@redhat.com> 2 siblings, 0 replies; 49+ messages in thread From: Gerd Hoffmann @ 2015-11-24 12:38 UTC (permalink / raw) To: Daniel Vetter Cc: igvt-g, qemu-devel, Reddy, Raghuveer, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Alex Williamson, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo Hi, > > Yes, vGPU may have additional features, like a framebuffer area, that > > aren't present or optional for direct assignment. Obviously we support > > direct assignment of GPUs for some vendors already without this feature. > > For exposing framebuffers for spice/vnc I highly recommend against > anything that looks like a bar/fixed mmio range mapping. First this means > the kernel driver needs to internally fake remapping, which isn't fun. Sure. I don't think we should remap here. More below. > My recoomendation is to build the actual memory access for underlying > framebuffers on top of dma-buf, so that it can be vacuumed up by e.g. the > host gpu driver again for rendering. We want that too ;) Some more background: OpenGL support in qemu is still young and emerging, and we are actually building on dma-bufs here. There are a bunch of different ways how guest display output is handled. At the end of the day it boils down to only two fundamental cases though: (a) Where qemu doesn't need access to the guest framebuffer - qemu directly renders via opengl (works today with virtio-gpu and will be in the qemu 2.5 release) - qemu passed on the dma-buf to spice client for local display (experimental code exists). - qemu feeds the guest display into gpu-assisted video encoder to send a stream over the network (no code yet). (b) Where qemu must read the guest framebuffer. - qemu's builtin vnc server. - qemu writing screenshots to file. - (non-opengl legacy code paths for local display, will hopefully disappear long-term though ...) So, the question is how to support (b) best. Even with OpenGL support in qemu improving over time I don't expect this going away completely anytime soon. I think it makes sense to have a special vfio region for that. I don't think remapping makes sense there. It doesn't need to be "live", it doesn't need support high refresh rates. Placing a copy of the guest framebuffer there on request (and convert from tiled to linear while being at it) is perfectly fine. qemu has a adaptive update rate and will stop doing frequent update requests when the vnc client disconnects, so there will be nothing to do if nobody wants actually see the guest display. Possible alternative approach would be to import a dma-buf, then use glReadPixels(). I suspect when doing the copy in the kernel the driver could ask just the gpu to blit the guest framebuffer. Don't know gfx hardware good enough to be sure though, comments are welcome. cheers, Gerd ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <1448368735.27648.110.camel@redhat.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <1448368735.27648.110.camel@redhat.com> @ 2015-11-24 13:31 ` Daniel Vetter [not found] ` <20151124133135.GY17050@phenom.ffwll.local> 1 sibling, 0 replies; 49+ messages in thread From: Daniel Vetter @ 2015-11-24 13:31 UTC (permalink / raw) To: Gerd Hoffmann Cc: igvt-g, qemu-devel, Reddy, Raghuveer, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Alex Williamson, Zhou, Chao, Daniel Vetter, Paolo Bonzini, Zhu, Libo, Wang, Hongbo On Tue, Nov 24, 2015 at 01:38:55PM +0100, Gerd Hoffmann wrote: > Hi, > > > > Yes, vGPU may have additional features, like a framebuffer area, that > > > aren't present or optional for direct assignment. Obviously we support > > > direct assignment of GPUs for some vendors already without this feature. > > > > For exposing framebuffers for spice/vnc I highly recommend against > > anything that looks like a bar/fixed mmio range mapping. First this means > > the kernel driver needs to internally fake remapping, which isn't fun. > > Sure. I don't think we should remap here. More below. > > > My recoomendation is to build the actual memory access for underlying > > framebuffers on top of dma-buf, so that it can be vacuumed up by e.g. the > > host gpu driver again for rendering. > > We want that too ;) > > Some more background: > > OpenGL support in qemu is still young and emerging, and we are actually > building on dma-bufs here. There are a bunch of different ways how > guest display output is handled. At the end of the day it boils down to > only two fundamental cases though: > > (a) Where qemu doesn't need access to the guest framebuffer > - qemu directly renders via opengl (works today with virtio-gpu > and will be in the qemu 2.5 release) > - qemu passed on the dma-buf to spice client for local display > (experimental code exists). > - qemu feeds the guest display into gpu-assisted video encoder > to send a stream over the network (no code yet). > > (b) Where qemu must read the guest framebuffer. > - qemu's builtin vnc server. > - qemu writing screenshots to file. > - (non-opengl legacy code paths for local display, will > hopefully disappear long-term though ...) > > So, the question is how to support (b) best. Even with OpenGL support > in qemu improving over time I don't expect this going away completely > anytime soon. > > I think it makes sense to have a special vfio region for that. I don't > think remapping makes sense there. It doesn't need to be "live", it > doesn't need support high refresh rates. Placing a copy of the guest > framebuffer there on request (and convert from tiled to linear while > being at it) is perfectly fine. qemu has a adaptive update rate and > will stop doing frequent update requests when the vnc client > disconnects, so there will be nothing to do if nobody wants actually see > the guest display. > > Possible alternative approach would be to import a dma-buf, then use > glReadPixels(). I suspect when doing the copy in the kernel the driver > could ask just the gpu to blit the guest framebuffer. Don't know gfx > hardware good enough to be sure though, comments are welcome. Generally the kernel can't do gpu blts since the required massive state setup is only in the userspace side of the GL driver stack. But glReadPixels can do tricks for detiling, and if you use pixel buffer objects or something similar it'll even be amortized reasonably. But there's some work to add generic mmap support to dma-bufs, and for really simple case (where we don't have a gl driver to handle the dma-buf specially) for untiled framebuffers that would be all we need? -Daniel -- Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <20151124133135.GY17050@phenom.ffwll.local>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <20151124133135.GY17050@phenom.ffwll.local> @ 2015-11-24 14:12 ` Gerd Hoffmann [not found] ` <1448374351.27648.128.camel@redhat.com> 1 sibling, 0 replies; 49+ messages in thread From: Gerd Hoffmann @ 2015-11-24 14:12 UTC (permalink / raw) To: Daniel Vetter Cc: igvt-g, qemu-devel, Reddy, Raghuveer, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Alex Williamson, Zhou, Chao, Paolo Bonzini, Zhu, Libo, Wang, Hongbo Hi, > But there's some work to add generic mmap support to dma-bufs, and for > really simple case (where we don't have a gl driver to handle the dma-buf > specially) for untiled framebuffers that would be all we need? Not requiring gl is certainly a bonus, people might want build qemu without opengl support to reduce the attach surface and/or package dependency chain. And, yes, requirements for the non-gl rendering path are pretty low. qemu needs something it can mmap, and which it can ask pixman to handle. Preferred format is PIXMAN_x8r8g8b8 (qemu uses that internally in alot of places so this avoids conversions). Current plan is to have a special vfio region (not visible to the guest) where the framebuffer lives, with one or two pages at the end for meta data (format and size). Status field is there too and will be used by qemu to request updates and the kernel to signal update completion. Guess I should write that down as vfio rfc patch ... I don't think it makes sense to have fields to notify qemu about which framebuffer regions have been updated, I'd expect with full-screen composing we have these days this information isn't available anyway. Maybe a flag telling whenever there have been updates or not, so qemu can skip update processing in case we have the screensaver showing a black screen all day long. cheers, Gerd ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <1448374351.27648.128.camel@redhat.com>]
* Re: [Intel-gfx] [Announcement] 2015-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <1448374351.27648.128.camel@redhat.com> @ 2015-11-24 14:19 ` Daniel Vetter 0 siblings, 0 replies; 49+ messages in thread From: Daniel Vetter @ 2015-11-24 14:19 UTC (permalink / raw) To: Gerd Hoffmann Cc: igvt-g, qemu-devel, Reddy, Raghuveer, White, Michael L, Cowperthwaite, David J, intel-gfx, Li, Susie, Dong, Eddie, linux-kernel, xen-devel, Alex Williamson, Zhou, Chao, Daniel Vetter, Paolo Bonzini, Zhu, Libo, Wang, Hongbo On Tue, Nov 24, 2015 at 03:12:31PM +0100, Gerd Hoffmann wrote: > Hi, > > > But there's some work to add generic mmap support to dma-bufs, and for > > really simple case (where we don't have a gl driver to handle the dma-buf > > specially) for untiled framebuffers that would be all we need? > > Not requiring gl is certainly a bonus, people might want build qemu > without opengl support to reduce the attach surface and/or package > dependency chain. > > And, yes, requirements for the non-gl rendering path are pretty low. > qemu needs something it can mmap, and which it can ask pixman to handle. > Preferred format is PIXMAN_x8r8g8b8 (qemu uses that internally in alot > of places so this avoids conversions). > > Current plan is to have a special vfio region (not visible to the guest) > where the framebuffer lives, with one or two pages at the end for meta > data (format and size). Status field is there too and will be used by > qemu to request updates and the kernel to signal update completion. > Guess I should write that down as vfio rfc patch ... > > I don't think it makes sense to have fields to notify qemu about which > framebuffer regions have been updated, I'd expect with full-screen > composing we have these days this information isn't available anyway. > Maybe a flag telling whenever there have been updates or not, so qemu > can skip update processing in case we have the screensaver showing a > black screen all day long. GL, wayland, X, EGL and soonish Android's surface flinger (hwc already has it afaik) all track damage. There's plans to add the same to the atomic kms api too. But if you do damage tracking you really don't want to support (maybe allow for perf reasons if the guest is stupid) frontbuffer rendering, which means you need buffer handles + damage, and not a static region. -Daniel -- Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 49+ messages in thread
* Re: [Intel-gfx] [Announcement] 2015-Q4 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <562F4311.9@intel.com> 2015-11-18 18:12 ` Alex Williamson [not found] ` <1447870341.4697.92.camel@redhat.com> @ 2016-01-27 6:21 ` Jike Song [not found] ` <56A861D3.5090007@intel.com> 3 siblings, 0 replies; 49+ messages in thread From: Jike Song @ 2016-01-27 6:21 UTC (permalink / raw) To: xen-devel, igvt-g, intel-gfx, linux-kernel Cc: Tian, Kevin, Reddy, Raghuveer, White, Michael L, Dong, Eddie, Li, Susie, Cowperthwaite, David J, Zhou, Chao, Zhu, Libo, Wang, Hongbo, Zhiyuan Lv Hi all, We are pleased to announce another update of Intel GVT-g for Xen. Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT). Repositories ------------------------- Kernel: https://github.com/01org/igvtg-kernel (2015q4-4.2.0 branch) Xen: https://github.com/01org/igvtg-xen (2015q4-4.5 branch) Qemu: https://github.com/01org/igvtg-qemu (xengt_public2015q4 branch) This update consists of: - 6th generation Intel Core Processor (code name: Skylake) is preliminarily supported in this release. Users could start run multiple Windows / Linux virtual machines simultaneously, and switch display among them. - Backward compatibility support 4th generation Intel Core Processor (code name: Haswell) and 5th generation Intel Core Processor (code name: Broadwell). - Kernel update from drm-intel 3.18.0 to drm-intel 4.2.0. Known issues: - At least 2GB memory is suggested for a VM to run most 3D workloads. - Keymap might be incorrect in guest. Config file may need to explicitly specify "keymap='en-us'". Although it looks like the default value, earlier we saw the problem of wrong keymap code if it is not explicitly set. - Cannot move mouse pointer smoothly in guest by default launched by VNC mode. Configuration file need to explicitly specify "usb=1" to enable a USB bus, and "usbdevice='tablet'" to add pointer device using absolute coordinates. - Running heavy 3D workloads in multiple guests for couple of hours may cause stability issue. - There are still stability issues on Skylake Next update will be around early April, 2016. GVT-g project portal: https://01.org/igvt-g Please subscribe mailing list: https://lists.01.org/mailman/listinfo/igvt-g More information about background, architecture and others about Intel GVT-g, can be found at: https://01.org/igvt-g https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-REWRITE%203RD%20v4.pdf https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt Note: The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. -- Thanks, Jike On 10/27/2015 05:25 PM, Jike Song wrote: > Hi all, > > We are pleased to announce another update of Intel GVT-g for Xen. > > Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT); and the core logic can be easily ported to other hypervisors. > > > Repositories > > Kernel: https://github.com/01org/igvtg-kernel (2015q3-3.18.0 branch) > Xen: https://github.com/01org/igvtg-xen (2015q3-4.5 branch) > Qemu: https://github.com/01org/igvtg-qemu (xengt_public2015q3 branch) > > > This update consists of: > > - XenGT is now merged with KVMGT in unified repositories(kernel and qemu), but currently > different branches for qemu. XenGT and KVMGT share same iGVT-g core logic. > - fix sysfs/debugfs access seldom crash issue > - fix a BUG in XenGT I/O emulation logic > - improve 3d workload stability > > Next update will be around early Jan, 2016. > > > Known issues: > > - At least 2GB memory is suggested for VM to run most 3D workloads. > - Keymap might be incorrect in guest. Config file may need to explicitly specify "keymap='en-us'". Although it looks like the default value, earlier we saw the problem of wrong keymap code if it is not explicitly set. > - When using three monitors, doing hotplug between Guest pause/unpause may not be able to lightup all monitors automatically. Some specific monitor issues. > - Cannot move mouse pointer smoothly in guest by default launched by VNC mode. Configuration file need to explicitly specify "usb=1" to enable a USB bus, and "usbdevice='tablet'" to add pointer device using absolute coordinates. > - Resume dom0 from S3 may cause some error message. > - i915 unload/reload cannot works well with less than 3 vcpu when upowerd service was running > - Unigen Tropics running in multiple guests will cause dom0 and guests tdr. > > > Please subscribe the mailing list to report BUGs, discuss, and/or contribute: > > https://lists.01.org/mailman/listinfo/igvt-g > > > More information about Intel GVT-g background, architecture, etc can be found at(may not be up-to-date): > > https://01.org/igvt-g > https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian > http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf > http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-REWRITE%203RD%20v4.pdf > https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt > > > Note: > > The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. > > > -- > Thanks, > Jike > > On 07/07/2015 10:49 AM, Jike Song wrote: >> Hi all, >> >> We're pleased to announce a public update to Intel Graphics Virtualization Technology(Intel GVT-g, formerly known as XenGT). >> >> Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT); and the core logic can be easily ported to other hypervisors, for example, the experimental code has been released to support GVT-g running on a KVM hypervisor (a.k.a KVMGT). >> >> Tip of repositories >> ------------------------- >> >> Kernel: 5b73653d5ca, Branch: master-2015Q2-3.18.0 >> Qemu: 2a75bbff62c1, Branch: master >> Xen: 38c36f0f511b1, Branch: master-2015Q2-4.5 >> >> This update consists of: >> - Change time based scheduler timer to be configurable to enhance stability >> - Fix stability issues that VM/Dom0 got tdr when hang up at some specific instruction on BDW >> - Optimize the emulation of el_status register to enhance stability >> - 2D/3D performance in linux VMs has been improved about 50% on BDW >> - Fix abnormal idle power consumption issue due to wrong forcewake policy >> - Fix tdr issue when running 2D/3D/Media workloads in Windows VMs simultaneously >> - KVM support is still in a separate branch as prototype work. We plan to integrate KVM/Xen support together in the future releases >> - Next update will be around early Oct, 2015 >> >> Notice that this release can support both Intel 4th generation Core CPU(code name: Haswell) and Intel 5th generation Core CPU (code name: Broadwell), while the limitation of the latter include: >> * 3D conformance may have some failure >> * Under high demand 3D workloads, stability issues are detected >> * Multi-monitor scenario is not fully tested, while single monitor of VGA/HDMI/DP/eDP should just work >> * Hotplug DP may cause black screen even on native environment >> >> Where to get >> >> kernel: https://github.com/01org/XenGT-Preview-kernel.git >> xen: https://github.com/01org/XenGT-Preview-xen.git >> qemu: https://github.com/01org/XenGT-Preview-qemu.git >> >> >> We have a mailing list for GVT-g development, bug report and technical discussion: >> >> https://lists.01.org/mailman/listinfo/igvt-g >> >> More information about Intel GVT-g background, architecture, etc can be found at: >> >> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >> >> >> Note: The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. >> >> >> -- >> Thanks, >> Jike >> >> On 04/10/2015 09:23 PM, Jike Song wrote: >>> Hi all, >>> >>> We're pleased to announce a public update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >>> >>> Tip of repositories >>> ------------------------- >>> >>> Kernel: a011c9f953e, Branch: master-2015Q1-3.18.0 >>> Qemu: 2a75bbff62c1, Branch: master >>> Xen: 38c36f0f511b1, Branch: master-2015Q1-4.5 >>> >>> Summary this update >>> ------------------------- >>> - Preliminary Broadwell support. >>> - kernel update from drm-intel 3.17.0 to drm-intel 3.18.0(tag: drm-intel-next-fixes-2014-12-17, notice that i915 driver code is much newer than kernel stable version). >>> - Next update will be around early July, 2015. >>> - KVM support is still in a separate branch as prototype work. We plan to integrate KVM/Xen support together in future releases. >>> >>> This update consists of: >>> - gvt-g core logic code was moved into i915 driver directory. >>> - Host mediation is used for dom0 i915 driver access, instead of de-privileged dom0. >>> - The Xen-specific code was separated from vgt core logic into a new file "driver/xen/xengt.c". >>> - Broadwell is preliminarily supported in this release. Users could start multiple linux/windows 64-bit virtual machines simultaneously, and perform display switch among them. >>> >>> Notice that it is still preliminary release for BDW, which is not yet in the same level of HSW release. Differences include: >>> * Power/performance tuning on BDW is not yet done. >>> * Stability needs to be improved. >>> * No 32-bit guest OS support. >>> * Multi-monitor scenario is not fully tested, while single monitor of VGA/HDMI/DP/eDP should just work. >>> >>> >>> Where to get: >>> ----------------- >>> kerenl: https://github.com/01org/XenGT-Preview-kernel.git >>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>> >>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>> https://github.com/01org/XenGT-Preview-kernel/blob/master-2015Q1-3.18.0/XenGT_Setup_Guide_2015Q1.pdf >>> >>> More information about Intel GVT-g background, architecture, etc can be found at: >>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>> >>> The previous update can be found here: >>> http://lists.xen.org/archives/html/xen-devel/2014-12/msg00474.html >>> >>> >>> Note >>> --------------- >>> The XenGT project should be considered a work in progress, As such it is not a complete product nor should it be considered one., Extra care should be taken when testing and configuring a system to use the XenGT project. >>> >>> >>> -- >>> Thanks, >>> Jike >>> >>> On 01/09/2015 04:51 PM, Jike Song wrote: >>>> Hi all, >>>> >>>> We're pleased to announce a public update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. The XenGT project should be considered a work in progress, As such it is not a complete product nor should it be considered one., Extra care should be taken when testing and configuring a system to use the XenGT project. >>>> >>>> The news of this update: >>>> >>>> - kernel update from 3.14.1 to drm-intel 3.17.0. >>>> - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet. >>>> - Next update will be around early Apr, 2015. >>>> >>>> This update consists of: >>>> >>>> - Including some bug fixes and stability enhancement. >>>> - Making XenGT device model to be aware of Broadwell. In this version BDW is not yet functioning. >>>> - Available Fence registers number is changed to 32 from 16 to align with HSW hardware. >>>> - New cascade interrupt framework for supporting interrupt virtualization on both Haswell and Broadwell. >>>> - Add back the gem_vgtbuffer. The previous release did not build that module for 3.14 kernel. In this release, the module is back and rebased to 3.17. >>>> - Enable the irq based context switch in vgt driver, which will help reduce the cpu utilization while doing context switch, it is enabled by default, and can be turn off by kernel flag irq_based_ctx_switch. >>>> >>>> >>>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>>> >>>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >>>> >>>> The new source codes are available at the updated github repos: >>>> >>>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>> >>>> >>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>> >>>> >>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>> >>>> >>>> >>>> The previous update can be found here: >>>> >>>> >>>> http://lists.xen.org/archives/html/xen-devel/2014-12/msg00474.html >>>> >>>> >>>> >>>> Appreciate your comments! >>>> >>>> >>>> >>>> -- >>>> Thanks, >>>> Jike >>>> >>>> >>>> On 12/04/2014 10:45 AM, Jike Song wrote: >>>>> Hi all, >>>>> >>>>> We're pleased to announce a public release to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >>>>> >>>>> >>>>> The news of this update: >>>>> >>>>> >>>>> - kernel update from 3.11.6 to 3.14.1 >>>>> >>>>> - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet >>>>> >>>>> - Next update will be around early Jan, 2015 >>>>> >>>>> >>>>> This update consists of: >>>>> >>>>> - Windows HVM support with driver version 15.33.3910 >>>>> >>>>> - Stability fixes, e.g. stabilize GPU, the GPU hang occurrence rate becomes rare now >>>>> >>>>> - Hardware Media Acceleration for Decoding/Encoding/Transcoding, VC1, H264 etc. format supporting >>>>> >>>>> - Display enhancements, e.g. DP type is supported for virtual PORT >>>>> >>>>> - Display port capability virtualization: with this feature, dom0 manager could freely assign virtual DDI ports to VM, not necessary to check whether the corresponding physical DDI ports are available >>>>> >>>>> >>>>> >>>>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>>>> >>>>> >>>>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >>>>> >>>>> >>>>> >>>>> The new source codes are available at the updated github repos: >>>>> >>>>> >>>>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>>>> >>>>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>>>> >>>>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>>> >>>>> >>>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>>> >>>>> >>>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>>> >>>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>>> >>>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>>> >>>>> >>>>> The previous update can be found here: >>>>> >>>>> >>>>> http://lists.xen.org/archives/html/xen-devel/2014-07/msg03248.html >>>>> >>>>> >>>>> Appreciate your comments! >>>>> >>>>> >>>>> -- >>>>> Thanks, >>>>> Jike >>>>> >>>>> On 07/25/2014 04:31 PM, Jike Song wrote: >>>>>> Hi all, >>>>>> >>>>>> We're pleased to announce an update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >>>>>> >>>>>> The news of this update: >>>>>> >>>>>> - Project code name is "XenGT", now official name is Intel Graphics Virtualization Technology (Intel GVT-g) >>>>>> - Currently Intel GVT-g supports Intel Processor Graphics built into 4th generation Intel Core processors - Haswell platform >>>>>> - Moving forward, XenGT will change to quarterly release cadence. Next update will be around early October, 2014. >>>>>> >>>>>> This update consists of: >>>>>> >>>>>> - Stability fixes, e.g. stable DP support >>>>>> - Display enhancements, e.g. virtual monitor support. Users can define a virtual monitor type with customized EDID for virtual machines, not necessarily the same as physical monitors. >>>>>> - Improved support for GPU recovery >>>>>> - Experimental Windows HVM support. To download the experimental version, see setup guide for details >>>>>> - Experimental Hardware Media Acceleration for decoding. >>>>>> >>>>>> >>>>>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>>>>> >>>>>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >>>>>> >>>>>> >>>>>> The new source codes are available at the updated github repos: >>>>>> >>>>>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>>>>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>>>>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>>>> >>>>>> >>>>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>>>> >>>>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>>>> >>>>>> The previous update can be found here: >>>>>> >>>>>> http://lists.xen.org/archives/html/xen-devel/2014-02/msg01848.html >>>>>> >>>>>> Appreciate your comments! >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Thanks, >>>>>> Jike >>>>>> ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <56A861D3.5090007@intel.com>]
* Re: [Intel-gfx] [Announcement] 2016-Q1 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <56A861D3.5090007@intel.com> @ 2016-04-28 5:29 ` Jike Song [not found] ` <57219F9F.9070602@intel.com> 1 sibling, 0 replies; 49+ messages in thread From: Jike Song @ 2016-04-28 5:29 UTC (permalink / raw) To: igvt-g, xen-devel, intel-gfx, linux-kernel Cc: Tian, Kevin, Reddy, Raghuveer, Dong, Eddie, Li, Susie, Cowperthwaite, David J, Zhiyuan Lv, Zhu, Libo, Wang, Hongbo Hi all, We are pleased to announce another update of Intel GVT-g for Xen. Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT). Repositories ------------------------- Kernel: https://github.com/01org/igvtg-kernel (2016q1-4.3.0 branch) Xen: https://github.com/01org/igvtg-xen (2016q1-4.6 branch) Qemu: https://github.com/01org/igvtg-qemu (2016q1-2.3.0 branch) This update consists of: - Windows 10 guest is preliminarily supported in this release. - Implemented vgtbuffer(Indirect display) feature on SKL platform. - Backward compatibility support 5th generation (Broadwell) - Increased VGT stability on SKL platform - Kernel updated from drm-intel 4.2.0 to drm-intel 4.3.0 - Xen updated from Xen 4.5.0 to Xen 4.6.0 - Qemu updated from 1.6 to 2.3 Known issues: - At least 2GB memory is suggested for VM(win7-32/64, win8.1 64) to run most 3D workloads. - Windows 7 GFX driver upgrading only works on Safe mode. - Some media decode can't work well (will be resolved in the next version Windows GFX driver). - Windows8 and later Windows fast boot is not supported, whose workaround is to disable power S3/S4 in HVM file by adding "acpi_s3=0, acpi_s4=0" - Sometimes when dom0 and guest have heavy workload, i915 in dom0 will trigger a false graphics reset. The workaround is to disable dom0 hangcheck in dom0 grub file by adding "i915.enable_hangcheck=0" Next update will be around early July, 2016. GVT-g project portal: https://01.org/igvt-g Please subscribe the mailing list: https://lists.01.org/mailman/listinfo/igvt-g More information about background, architecture and others about Intel GVT-g, can be found at: https://01.org/igvt-g https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-REWRITE%203RD%20v4.pdf https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt Note: The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. -- Thanks, Jike On 01/27/2016 02:21 PM, Jike Song wrote: > Hi all, > > We are pleased to announce another update of Intel GVT-g for Xen. > > Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT). > > Repositories > ------------------------- > > Kernel: https://github.com/01org/igvtg-kernel (2015q4-4.2.0 branch) > Xen: https://github.com/01org/igvtg-xen (2015q4-4.5 branch) > Qemu: https://github.com/01org/igvtg-qemu (xengt_public2015q4 branch) > > This update consists of: > > - 6th generation Intel Core Processor (code name: Skylake) is preliminarily supported in this release. Users could start run multiple Windows / Linux virtual machines simultaneously, and switch display among them. > - Backward compatibility support 4th generation Intel Core Processor (code name: Haswell) and 5th generation Intel Core Processor (code name: Broadwell). > - Kernel update from drm-intel 3.18.0 to drm-intel 4.2.0. > > Known issues: > - At least 2GB memory is suggested for a VM to run most 3D workloads. > - Keymap might be incorrect in guest. Config file may need to explicitly specify "keymap='en-us'". Although it looks like the default value, earlier we saw the problem of wrong keymap code if it is not explicitly set. > - Cannot move mouse pointer smoothly in guest by default launched by VNC mode. Configuration file need to explicitly specify "usb=1" to enable a USB bus, and "usbdevice='tablet'" to add pointer device using absolute coordinates. > - Running heavy 3D workloads in multiple guests for couple of hours may cause stability issue. > - There are still stability issues on Skylake > > > Next update will be around early April, 2016. > > GVT-g project portal: https://01.org/igvt-g > Please subscribe mailing list: https://lists.01.org/mailman/listinfo/igvt-g > > > More information about background, architecture and others about Intel GVT-g, can be found at: > > https://01.org/igvt-g > https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian > http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf > http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-REWRITE%203RD%20v4.pdf > https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt > > > Note: The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. > > > -- > Thanks, > Jike > > On 10/27/2015 05:25 PM, Jike Song wrote: >> Hi all, >> >> We are pleased to announce another update of Intel GVT-g for Xen. >> >> Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT); and the core logic can be easily ported to other hypervisors. >> >> >> Repositories >> >> Kernel: https://github.com/01org/igvtg-kernel (2015q3-3.18.0 branch) >> Xen: https://github.com/01org/igvtg-xen (2015q3-4.5 branch) >> Qemu: https://github.com/01org/igvtg-qemu (xengt_public2015q3 branch) >> >> >> This update consists of: >> >> - XenGT is now merged with KVMGT in unified repositories(kernel and qemu), but currently >> different branches for qemu. XenGT and KVMGT share same iGVT-g core logic. >> - fix sysfs/debugfs access seldom crash issue >> - fix a BUG in XenGT I/O emulation logic >> - improve 3d workload stability >> >> Next update will be around early Jan, 2016. >> >> >> Known issues: >> >> - At least 2GB memory is suggested for VM to run most 3D workloads. >> - Keymap might be incorrect in guest. Config file may need to explicitly specify "keymap='en-us'". Although it looks like the default value, earlier we saw the problem of wrong keymap code if it is not explicitly set. >> - When using three monitors, doing hotplug between Guest pause/unpause may not be able to lightup all monitors automatically. Some specific monitor issues. >> - Cannot move mouse pointer smoothly in guest by default launched by VNC mode. Configuration file need to explicitly specify "usb=1" to enable a USB bus, and "usbdevice='tablet'" to add pointer device using absolute coordinates. >> - Resume dom0 from S3 may cause some error message. >> - i915 unload/reload cannot works well with less than 3 vcpu when upowerd service was running >> - Unigen Tropics running in multiple guests will cause dom0 and guests tdr. >> >> >> Please subscribe the mailing list to report BUGs, discuss, and/or contribute: >> >> https://lists.01.org/mailman/listinfo/igvt-g >> >> >> More information about Intel GVT-g background, architecture, etc can be found at(may not be up-to-date): >> >> https://01.org/igvt-g >> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-REWRITE%203RD%20v4.pdf >> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >> >> >> Note: >> >> The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. >> >> >> -- >> Thanks, >> Jike >> >> On 07/07/2015 10:49 AM, Jike Song wrote: >>> Hi all, >>> >>> We're pleased to announce a public update to Intel Graphics Virtualization Technology(Intel GVT-g, formerly known as XenGT). >>> >>> Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT); and the core logic can be easily ported to other hypervisors, for example, the experimental code has been released to support GVT-g running on a KVM hypervisor (a.k.a KVMGT). >>> >>> Tip of repositories >>> ------------------------- >>> >>> Kernel: 5b73653d5ca, Branch: master-2015Q2-3.18.0 >>> Qemu: 2a75bbff62c1, Branch: master >>> Xen: 38c36f0f511b1, Branch: master-2015Q2-4.5 >>> >>> This update consists of: >>> - Change time based scheduler timer to be configurable to enhance stability >>> - Fix stability issues that VM/Dom0 got tdr when hang up at some specific instruction on BDW >>> - Optimize the emulation of el_status register to enhance stability >>> - 2D/3D performance in linux VMs has been improved about 50% on BDW >>> - Fix abnormal idle power consumption issue due to wrong forcewake policy >>> - Fix tdr issue when running 2D/3D/Media workloads in Windows VMs simultaneously >>> - KVM support is still in a separate branch as prototype work. We plan to integrate KVM/Xen support together in the future releases >>> - Next update will be around early Oct, 2015 >>> >>> Notice that this release can support both Intel 4th generation Core CPU(code name: Haswell) and Intel 5th generation Core CPU (code name: Broadwell), while the limitation of the latter include: >>> * 3D conformance may have some failure >>> * Under high demand 3D workloads, stability issues are detected >>> * Multi-monitor scenario is not fully tested, while single monitor of VGA/HDMI/DP/eDP should just work >>> * Hotplug DP may cause black screen even on native environment >>> >>> Where to get >>> >>> kernel: https://github.com/01org/XenGT-Preview-kernel.git >>> xen: https://github.com/01org/XenGT-Preview-xen.git >>> qemu: https://github.com/01org/XenGT-Preview-qemu.git >>> >>> >>> We have a mailing list for GVT-g development, bug report and technical discussion: >>> >>> https://lists.01.org/mailman/listinfo/igvt-g >>> >>> More information about Intel GVT-g background, architecture, etc can be found at: >>> >>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>> >>> >>> Note: The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. >>> >>> >>> -- >>> Thanks, >>> Jike >>> >>> On 04/10/2015 09:23 PM, Jike Song wrote: >>>> Hi all, >>>> >>>> We're pleased to announce a public update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >>>> >>>> Tip of repositories >>>> ------------------------- >>>> >>>> Kernel: a011c9f953e, Branch: master-2015Q1-3.18.0 >>>> Qemu: 2a75bbff62c1, Branch: master >>>> Xen: 38c36f0f511b1, Branch: master-2015Q1-4.5 >>>> >>>> Summary this update >>>> ------------------------- >>>> - Preliminary Broadwell support. >>>> - kernel update from drm-intel 3.17.0 to drm-intel 3.18.0(tag: drm-intel-next-fixes-2014-12-17, notice that i915 driver code is much newer than kernel stable version). >>>> - Next update will be around early July, 2015. >>>> - KVM support is still in a separate branch as prototype work. We plan to integrate KVM/Xen support together in future releases. >>>> >>>> This update consists of: >>>> - gvt-g core logic code was moved into i915 driver directory. >>>> - Host mediation is used for dom0 i915 driver access, instead of de-privileged dom0. >>>> - The Xen-specific code was separated from vgt core logic into a new file "driver/xen/xengt.c". >>>> - Broadwell is preliminarily supported in this release. Users could start multiple linux/windows 64-bit virtual machines simultaneously, and perform display switch among them. >>>> >>>> Notice that it is still preliminary release for BDW, which is not yet in the same level of HSW release. Differences include: >>>> * Power/performance tuning on BDW is not yet done. >>>> * Stability needs to be improved. >>>> * No 32-bit guest OS support. >>>> * Multi-monitor scenario is not fully tested, while single monitor of VGA/HDMI/DP/eDP should just work. >>>> >>>> >>>> Where to get: >>>> ----------------- >>>> kerenl: https://github.com/01org/XenGT-Preview-kernel.git >>>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>> >>>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>>> https://github.com/01org/XenGT-Preview-kernel/blob/master-2015Q1-3.18.0/XenGT_Setup_Guide_2015Q1.pdf >>>> >>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>> >>>> The previous update can be found here: >>>> http://lists.xen.org/archives/html/xen-devel/2014-12/msg00474.html >>>> >>>> >>>> Note >>>> --------------- >>>> The XenGT project should be considered a work in progress, As such it is not a complete product nor should it be considered one., Extra care should be taken when testing and configuring a system to use the XenGT project. >>>> >>>> >>>> -- >>>> Thanks, >>>> Jike >>>> >>>> On 01/09/2015 04:51 PM, Jike Song wrote: >>>>> Hi all, >>>>> >>>>> We're pleased to announce a public update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. The XenGT project should be considered a work in progress, As such it is not a complete product nor should it be considered one., Extra care should be taken when testing and configuring a system to use the XenGT project. >>>>> >>>>> The news of this update: >>>>> >>>>> - kernel update from 3.14.1 to drm-intel 3.17.0. >>>>> - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet. >>>>> - Next update will be around early Apr, 2015. >>>>> >>>>> This update consists of: >>>>> >>>>> - Including some bug fixes and stability enhancement. >>>>> - Making XenGT device model to be aware of Broadwell. In this version BDW is not yet functioning. >>>>> - Available Fence registers number is changed to 32 from 16 to align with HSW hardware. >>>>> - New cascade interrupt framework for supporting interrupt virtualization on both Haswell and Broadwell. >>>>> - Add back the gem_vgtbuffer. The previous release did not build that module for 3.14 kernel. In this release, the module is back and rebased to 3.17. >>>>> - Enable the irq based context switch in vgt driver, which will help reduce the cpu utilization while doing context switch, it is enabled by default, and can be turn off by kernel flag irq_based_ctx_switch. >>>>> >>>>> >>>>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>>>> >>>>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >>>>> >>>>> The new source codes are available at the updated github repos: >>>>> >>>>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>>>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>>>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>>> >>>>> >>>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>>> >>>>> >>>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>>> >>>>> >>>>> >>>>> The previous update can be found here: >>>>> >>>>> >>>>> http://lists.xen.org/archives/html/xen-devel/2014-12/msg00474.html >>>>> >>>>> >>>>> >>>>> Appreciate your comments! >>>>> >>>>> >>>>> >>>>> -- >>>>> Thanks, >>>>> Jike >>>>> >>>>> >>>>> On 12/04/2014 10:45 AM, Jike Song wrote: >>>>>> Hi all, >>>>>> >>>>>> We're pleased to announce a public release to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >>>>>> >>>>>> >>>>>> The news of this update: >>>>>> >>>>>> >>>>>> - kernel update from 3.11.6 to 3.14.1 >>>>>> >>>>>> - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet >>>>>> >>>>>> - Next update will be around early Jan, 2015 >>>>>> >>>>>> >>>>>> This update consists of: >>>>>> >>>>>> - Windows HVM support with driver version 15.33.3910 >>>>>> >>>>>> - Stability fixes, e.g. stabilize GPU, the GPU hang occurrence rate becomes rare now >>>>>> >>>>>> - Hardware Media Acceleration for Decoding/Encoding/Transcoding, VC1, H264 etc. format supporting >>>>>> >>>>>> - Display enhancements, e.g. DP type is supported for virtual PORT >>>>>> >>>>>> - Display port capability virtualization: with this feature, dom0 manager could freely assign virtual DDI ports to VM, not necessary to check whether the corresponding physical DDI ports are available >>>>>> >>>>>> >>>>>> >>>>>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>>>>> >>>>>> >>>>>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >>>>>> >>>>>> >>>>>> >>>>>> The new source codes are available at the updated github repos: >>>>>> >>>>>> >>>>>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>>>>> >>>>>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>>>>> >>>>>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>>>> >>>>>> >>>>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>>>> >>>>>> >>>>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>>>> >>>>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>>>> >>>>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>>>> >>>>>> >>>>>> The previous update can be found here: >>>>>> >>>>>> >>>>>> http://lists.xen.org/archives/html/xen-devel/2014-07/msg03248.html >>>>>> >>>>>> >>>>>> Appreciate your comments! >>>>>> >>>>>> >>>>>> -- >>>>>> Thanks, >>>>>> Jike >>>>>> >>>>>> On 07/25/2014 04:31 PM, Jike Song wrote: >>>>>>> Hi all, >>>>>>> >>>>>>> We're pleased to announce an update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >>>>>>> >>>>>>> The news of this update: >>>>>>> >>>>>>> - Project code name is "XenGT", now official name is Intel Graphics Virtualization Technology (Intel GVT-g) >>>>>>> - Currently Intel GVT-g supports Intel Processor Graphics built into 4th generation Intel Core processors - Haswell platform >>>>>>> - Moving forward, XenGT will change to quarterly release cadence. Next update will be around early October, 2014. >>>>>>> >>>>>>> This update consists of: >>>>>>> >>>>>>> - Stability fixes, e.g. stable DP support >>>>>>> - Display enhancements, e.g. virtual monitor support. Users can define a virtual monitor type with customized EDID for virtual machines, not necessarily the same as physical monitors. >>>>>>> - Improved support for GPU recovery >>>>>>> - Experimental Windows HVM support. To download the experimental version, see setup guide for details >>>>>>> - Experimental Hardware Media Acceleration for decoding. >>>>>>> >>>>>>> >>>>>>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>>>>>> >>>>>>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >>>>>>> >>>>>>> >>>>>>> The new source codes are available at the updated github repos: >>>>>>> >>>>>>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>>>>>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>>>>>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>>>>> >>>>>>> >>>>>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>>>>> >>>>>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>>>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>>>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>>>>> >>>>>>> The previous update can be found here: >>>>>>> >>>>>>> http://lists.xen.org/archives/html/xen-devel/2014-02/msg01848.html >>>>>>> >>>>>>> Appreciate your comments! >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Thanks, >>>>>>> Jike >>>>>>> _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org http://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <57219F9F.9070602@intel.com>]
* Re: [Intel-gfx] [Announcement] 2016-Q2 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <57219F9F.9070602@intel.com> @ 2016-07-22 5:42 ` Jike Song [not found] ` <5791B25C.8080109@intel.com> 1 sibling, 0 replies; 49+ messages in thread From: Jike Song @ 2016-07-22 5:42 UTC (permalink / raw) To: igvt-g, xen-devel, intel-gfx, linux-kernel Cc: Tian, Kevin, Reddy, Raghuveer, Dong, Eddie, Li, Susie, Cowperthwaite, David J, Zhiyuan Lv, Zhu, Libo, Wang, Hongbo Hi all, We are pleased to announce another update of Intel GVT-g for Xen. Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT). Repositories - Xen: https://github.com/01org/igvtg-xen (2016q2-4.6 branch) - Kernel: https://github.com/01org/igvtg-kernel (2016q2-4.3.0 branch) - Qemu: https://github.com/01org/igvtg-qemu (2016q2-2.3.0 branch) This update consists of: - Support Windows 10 guest - Support Windows Graphics driver installation on both Windows Normal mode and Safe mode Known issues: - At least 2GB memory is suggested for Guest Virtual Machine (VM) to run most 3D workloads - Dom0 S3 related feature is not supported - Windows 8 and later versions: fast boot is not supported, the workaround is to disable power S3/S4 in HVM file by adding "acpi_S3=0, acpi_S4=0" - Using Windows Media Player play videos may cause host crash. Using VLC to play .ogg file may cause mosaic or slow response. - Sometimes when both dom0 and guest have heavy workloads, i915 in dom0 will trigger a false graphics reset, the workaround is to disable dom0 hangcheck in grub file by adding "i915.enable_hangcheck=0". Next update will be around early Oct, 2016. GVT-g project portal: https://01.org/igvt-g Please subscribe mailing list: https://lists.01.org/mailman/listinfo/igvt-g More information about background, architecture and others about Intel GVT-g, can be found at: https://01.org/igvt-g https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-REWRITE%203RD%20v4.pdf https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt Note: The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. -- Thanks, Jike On 04/28/2016 01:29 PM, Jike Song wrote: > Hi all, > > We are pleased to announce another update of Intel GVT-g for Xen. > > Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT). > > > Repositories > ------------------------- > > Kernel: https://github.com/01org/igvtg-kernel (2016q1-4.3.0 branch) > Xen: https://github.com/01org/igvtg-xen (2016q1-4.6 branch) > Qemu: https://github.com/01org/igvtg-qemu (2016q1-2.3.0 branch) > > This update consists of: > - Windows 10 guest is preliminarily supported in this release. > - Implemented vgtbuffer(Indirect display) feature on SKL platform. > - Backward compatibility support 5th generation (Broadwell) > - Increased VGT stability on SKL platform > - Kernel updated from drm-intel 4.2.0 to drm-intel 4.3.0 > - Xen updated from Xen 4.5.0 to Xen 4.6.0 > - Qemu updated from 1.6 to 2.3 > > Known issues: > - At least 2GB memory is suggested for VM(win7-32/64, win8.1 64) to run most 3D workloads. > - Windows 7 GFX driver upgrading only works on Safe mode. > - Some media decode can't work well (will be resolved in the next version Windows GFX driver). > - Windows8 and later Windows fast boot is not supported, whose workaround is to disable power S3/S4 in HVM file by adding "acpi_s3=0, acpi_s4=0" > - Sometimes when dom0 and guest have heavy workload, i915 in dom0 will trigger a false graphics reset. The workaround is to disable dom0 hangcheck in dom0 grub file by adding "i915.enable_hangcheck=0" > > Next update will be around early July, 2016. > > GVT-g project portal: > https://01.org/igvt-g > > Please subscribe the mailing list: > https://lists.01.org/mailman/listinfo/igvt-g > > > More information about background, architecture and others about Intel GVT-g, can be found at: > > https://01.org/igvt-g > https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian > http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf > http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-REWRITE%203RD%20v4.pdf > https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt > > > Note: The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. > > > -- > Thanks, > Jike > > On 01/27/2016 02:21 PM, Jike Song wrote: >> Hi all, >> >> We are pleased to announce another update of Intel GVT-g for Xen. >> >> Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT). >> >> Repositories >> ------------------------- >> >> Kernel: https://github.com/01org/igvtg-kernel (2015q4-4.2.0 branch) >> Xen: https://github.com/01org/igvtg-xen (2015q4-4.5 branch) >> Qemu: https://github.com/01org/igvtg-qemu (xengt_public2015q4 branch) >> >> This update consists of: >> >> - 6th generation Intel Core Processor (code name: Skylake) is preliminarily supported in this release. Users could start run multiple Windows / Linux virtual machines simultaneously, and switch display among them. >> - Backward compatibility support 4th generation Intel Core Processor (code name: Haswell) and 5th generation Intel Core Processor (code name: Broadwell). >> - Kernel update from drm-intel 3.18.0 to drm-intel 4.2.0. >> >> Known issues: >> - At least 2GB memory is suggested for a VM to run most 3D workloads. >> - Keymap might be incorrect in guest. Config file may need to explicitly specify "keymap='en-us'". Although it looks like the default value, earlier we saw the problem of wrong keymap code if it is not explicitly set. >> - Cannot move mouse pointer smoothly in guest by default launched by VNC mode. Configuration file need to explicitly specify "usb=1" to enable a USB bus, and "usbdevice='tablet'" to add pointer device using absolute coordinates. >> - Running heavy 3D workloads in multiple guests for couple of hours may cause stability issue. >> - There are still stability issues on Skylake >> >> >> Next update will be around early April, 2016. >> >> GVT-g project portal: https://01.org/igvt-g >> Please subscribe mailing list: https://lists.01.org/mailman/listinfo/igvt-g >> >> >> More information about background, architecture and others about Intel GVT-g, can be found at: >> >> https://01.org/igvt-g >> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-REWRITE%203RD%20v4.pdf >> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >> >> >> Note: The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. >> >> >> -- >> Thanks, >> Jike >> >> On 10/27/2015 05:25 PM, Jike Song wrote: >>> Hi all, >>> >>> We are pleased to announce another update of Intel GVT-g for Xen. >>> >>> Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT); and the core logic can be easily ported to other hypervisors. >>> >>> >>> Repositories >>> >>> Kernel: https://github.com/01org/igvtg-kernel (2015q3-3.18.0 branch) >>> Xen: https://github.com/01org/igvtg-xen (2015q3-4.5 branch) >>> Qemu: https://github.com/01org/igvtg-qemu (xengt_public2015q3 branch) >>> >>> >>> This update consists of: >>> >>> - XenGT is now merged with KVMGT in unified repositories(kernel and qemu), but currently >>> different branches for qemu. XenGT and KVMGT share same iGVT-g core logic. >>> - fix sysfs/debugfs access seldom crash issue >>> - fix a BUG in XenGT I/O emulation logic >>> - improve 3d workload stability >>> >>> Next update will be around early Jan, 2016. >>> >>> >>> Known issues: >>> >>> - At least 2GB memory is suggested for VM to run most 3D workloads. >>> - Keymap might be incorrect in guest. Config file may need to explicitly specify "keymap='en-us'". Although it looks like the default value, earlier we saw the problem of wrong keymap code if it is not explicitly set. >>> - When using three monitors, doing hotplug between Guest pause/unpause may not be able to lightup all monitors automatically. Some specific monitor issues. >>> - Cannot move mouse pointer smoothly in guest by default launched by VNC mode. Configuration file need to explicitly specify "usb=1" to enable a USB bus, and "usbdevice='tablet'" to add pointer device using absolute coordinates. >>> - Resume dom0 from S3 may cause some error message. >>> - i915 unload/reload cannot works well with less than 3 vcpu when upowerd service was running >>> - Unigen Tropics running in multiple guests will cause dom0 and guests tdr. >>> >>> >>> Please subscribe the mailing list to report BUGs, discuss, and/or contribute: >>> >>> https://lists.01.org/mailman/listinfo/igvt-g >>> >>> >>> More information about Intel GVT-g background, architecture, etc can be found at(may not be up-to-date): >>> >>> https://01.org/igvt-g >>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-REWRITE%203RD%20v4.pdf >>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>> >>> >>> Note: >>> >>> The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. >>> >>> >>> -- >>> Thanks, >>> Jike >>> >>> On 07/07/2015 10:49 AM, Jike Song wrote: >>>> Hi all, >>>> >>>> We're pleased to announce a public update to Intel Graphics Virtualization Technology(Intel GVT-g, formerly known as XenGT). >>>> >>>> Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT); and the core logic can be easily ported to other hypervisors, for example, the experimental code has been released to support GVT-g running on a KVM hypervisor (a.k.a KVMGT). >>>> >>>> Tip of repositories >>>> ------------------------- >>>> >>>> Kernel: 5b73653d5ca, Branch: master-2015Q2-3.18.0 >>>> Qemu: 2a75bbff62c1, Branch: master >>>> Xen: 38c36f0f511b1, Branch: master-2015Q2-4.5 >>>> >>>> This update consists of: >>>> - Change time based scheduler timer to be configurable to enhance stability >>>> - Fix stability issues that VM/Dom0 got tdr when hang up at some specific instruction on BDW >>>> - Optimize the emulation of el_status register to enhance stability >>>> - 2D/3D performance in linux VMs has been improved about 50% on BDW >>>> - Fix abnormal idle power consumption issue due to wrong forcewake policy >>>> - Fix tdr issue when running 2D/3D/Media workloads in Windows VMs simultaneously >>>> - KVM support is still in a separate branch as prototype work. We plan to integrate KVM/Xen support together in the future releases >>>> - Next update will be around early Oct, 2015 >>>> >>>> Notice that this release can support both Intel 4th generation Core CPU(code name: Haswell) and Intel 5th generation Core CPU (code name: Broadwell), while the limitation of the latter include: >>>> * 3D conformance may have some failure >>>> * Under high demand 3D workloads, stability issues are detected >>>> * Multi-monitor scenario is not fully tested, while single monitor of VGA/HDMI/DP/eDP should just work >>>> * Hotplug DP may cause black screen even on native environment >>>> >>>> Where to get >>>> >>>> kernel: https://github.com/01org/XenGT-Preview-kernel.git >>>> xen: https://github.com/01org/XenGT-Preview-xen.git >>>> qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>> >>>> >>>> We have a mailing list for GVT-g development, bug report and technical discussion: >>>> >>>> https://lists.01.org/mailman/listinfo/igvt-g >>>> >>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>> >>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>> >>>> >>>> Note: The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. >>>> >>>> >>>> -- >>>> Thanks, >>>> Jike >>>> >>>> On 04/10/2015 09:23 PM, Jike Song wrote: >>>>> Hi all, >>>>> >>>>> We're pleased to announce a public update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >>>>> >>>>> Tip of repositories >>>>> ------------------------- >>>>> >>>>> Kernel: a011c9f953e, Branch: master-2015Q1-3.18.0 >>>>> Qemu: 2a75bbff62c1, Branch: master >>>>> Xen: 38c36f0f511b1, Branch: master-2015Q1-4.5 >>>>> >>>>> Summary this update >>>>> ------------------------- >>>>> - Preliminary Broadwell support. >>>>> - kernel update from drm-intel 3.17.0 to drm-intel 3.18.0(tag: drm-intel-next-fixes-2014-12-17, notice that i915 driver code is much newer than kernel stable version). >>>>> - Next update will be around early July, 2015. >>>>> - KVM support is still in a separate branch as prototype work. We plan to integrate KVM/Xen support together in future releases. >>>>> >>>>> This update consists of: >>>>> - gvt-g core logic code was moved into i915 driver directory. >>>>> - Host mediation is used for dom0 i915 driver access, instead of de-privileged dom0. >>>>> - The Xen-specific code was separated from vgt core logic into a new file "driver/xen/xengt.c". >>>>> - Broadwell is preliminarily supported in this release. Users could start multiple linux/windows 64-bit virtual machines simultaneously, and perform display switch among them. >>>>> >>>>> Notice that it is still preliminary release for BDW, which is not yet in the same level of HSW release. Differences include: >>>>> * Power/performance tuning on BDW is not yet done. >>>>> * Stability needs to be improved. >>>>> * No 32-bit guest OS support. >>>>> * Multi-monitor scenario is not fully tested, while single monitor of VGA/HDMI/DP/eDP should just work. >>>>> >>>>> >>>>> Where to get: >>>>> ----------------- >>>>> kerenl: https://github.com/01org/XenGT-Preview-kernel.git >>>>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>>>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>>> >>>>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>>>> https://github.com/01org/XenGT-Preview-kernel/blob/master-2015Q1-3.18.0/XenGT_Setup_Guide_2015Q1.pdf >>>>> >>>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>>> >>>>> The previous update can be found here: >>>>> http://lists.xen.org/archives/html/xen-devel/2014-12/msg00474.html >>>>> >>>>> >>>>> Note >>>>> --------------- >>>>> The XenGT project should be considered a work in progress, As such it is not a complete product nor should it be considered one., Extra care should be taken when testing and configuring a system to use the XenGT project. >>>>> >>>>> >>>>> -- >>>>> Thanks, >>>>> Jike >>>>> >>>>> On 01/09/2015 04:51 PM, Jike Song wrote: >>>>>> Hi all, >>>>>> >>>>>> We're pleased to announce a public update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. The XenGT project should be considered a work in progress, As such it is not a complete product nor should it be considered one., Extra care should be taken when testing and configuring a system to use the XenGT project. >>>>>> >>>>>> The news of this update: >>>>>> >>>>>> - kernel update from 3.14.1 to drm-intel 3.17.0. >>>>>> - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet. >>>>>> - Next update will be around early Apr, 2015. >>>>>> >>>>>> This update consists of: >>>>>> >>>>>> - Including some bug fixes and stability enhancement. >>>>>> - Making XenGT device model to be aware of Broadwell. In this version BDW is not yet functioning. >>>>>> - Available Fence registers number is changed to 32 from 16 to align with HSW hardware. >>>>>> - New cascade interrupt framework for supporting interrupt virtualization on both Haswell and Broadwell. >>>>>> - Add back the gem_vgtbuffer. The previous release did not build that module for 3.14 kernel. In this release, the module is back and rebased to 3.17. >>>>>> - Enable the irq based context switch in vgt driver, which will help reduce the cpu utilization while doing context switch, it is enabled by default, and can be turn off by kernel flag irq_based_ctx_switch. >>>>>> >>>>>> >>>>>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>>>>> >>>>>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >>>>>> >>>>>> The new source codes are available at the updated github repos: >>>>>> >>>>>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>>>>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>>>>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>>>> >>>>>> >>>>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>>>> >>>>>> >>>>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>>>> >>>>>> >>>>>> >>>>>> The previous update can be found here: >>>>>> >>>>>> >>>>>> http://lists.xen.org/archives/html/xen-devel/2014-12/msg00474.html >>>>>> >>>>>> >>>>>> >>>>>> Appreciate your comments! >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Thanks, >>>>>> Jike >>>>>> >>>>>> >>>>>> On 12/04/2014 10:45 AM, Jike Song wrote: >>>>>>> Hi all, >>>>>>> >>>>>>> We're pleased to announce a public release to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >>>>>>> >>>>>>> >>>>>>> The news of this update: >>>>>>> >>>>>>> >>>>>>> - kernel update from 3.11.6 to 3.14.1 >>>>>>> >>>>>>> - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet >>>>>>> >>>>>>> - Next update will be around early Jan, 2015 >>>>>>> >>>>>>> >>>>>>> This update consists of: >>>>>>> >>>>>>> - Windows HVM support with driver version 15.33.3910 >>>>>>> >>>>>>> - Stability fixes, e.g. stabilize GPU, the GPU hang occurrence rate becomes rare now >>>>>>> >>>>>>> - Hardware Media Acceleration for Decoding/Encoding/Transcoding, VC1, H264 etc. format supporting >>>>>>> >>>>>>> - Display enhancements, e.g. DP type is supported for virtual PORT >>>>>>> >>>>>>> - Display port capability virtualization: with this feature, dom0 manager could freely assign virtual DDI ports to VM, not necessary to check whether the corresponding physical DDI ports are available >>>>>>> >>>>>>> >>>>>>> >>>>>>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>>>>>> >>>>>>> >>>>>>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >>>>>>> >>>>>>> >>>>>>> >>>>>>> The new source codes are available at the updated github repos: >>>>>>> >>>>>>> >>>>>>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>>>>>> >>>>>>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>>>>>> >>>>>>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>>>>> >>>>>>> >>>>>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>>>>> >>>>>>> >>>>>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>>>>> >>>>>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>>>>> >>>>>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>>>>> >>>>>>> >>>>>>> The previous update can be found here: >>>>>>> >>>>>>> >>>>>>> http://lists.xen.org/archives/html/xen-devel/2014-07/msg03248.html >>>>>>> >>>>>>> >>>>>>> Appreciate your comments! >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Thanks, >>>>>>> Jike >>>>>>> >>>>>>> On 07/25/2014 04:31 PM, Jike Song wrote: >>>>>>>> Hi all, >>>>>>>> >>>>>>>> We're pleased to announce an update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >>>>>>>> >>>>>>>> The news of this update: >>>>>>>> >>>>>>>> - Project code name is "XenGT", now official name is Intel Graphics Virtualization Technology (Intel GVT-g) >>>>>>>> - Currently Intel GVT-g supports Intel Processor Graphics built into 4th generation Intel Core processors - Haswell platform >>>>>>>> - Moving forward, XenGT will change to quarterly release cadence. Next update will be around early October, 2014. >>>>>>>> >>>>>>>> This update consists of: >>>>>>>> >>>>>>>> - Stability fixes, e.g. stable DP support >>>>>>>> - Display enhancements, e.g. virtual monitor support. Users can define a virtual monitor type with customized EDID for virtual machines, not necessarily the same as physical monitors. >>>>>>>> - Improved support for GPU recovery >>>>>>>> - Experimental Windows HVM support. To download the experimental version, see setup guide for details >>>>>>>> - Experimental Hardware Media Acceleration for decoding. >>>>>>>> >>>>>>>> >>>>>>>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>>>>>>> >>>>>>>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >>>>>>>> >>>>>>>> >>>>>>>> The new source codes are available at the updated github repos: >>>>>>>> >>>>>>>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>>>>>>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>>>>>>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>>>>>> >>>>>>>> >>>>>>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>>>>>> >>>>>>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>>>>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>>>>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>>>>>> >>>>>>>> The previous update can be found here: >>>>>>>> >>>>>>>> http://lists.xen.org/archives/html/xen-devel/2014-02/msg01848.html >>>>>>>> >>>>>>>> Appreciate your comments! >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> Thanks, >>>>>>>> Jike >>>>>>>> _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org https://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 49+ messages in thread
[parent not found: <5791B25C.8080109@intel.com>]
* Re: [Intel-gfx] [Announcement] 2016-Q3 release of XenGT - a Mediated Graphics Passthrough Solution from Intel [not found] ` <5791B25C.8080109@intel.com> @ 2016-11-06 14:59 ` Jike Song 0 siblings, 0 replies; 49+ messages in thread From: Jike Song @ 2016-11-06 14:59 UTC (permalink / raw) To: igvt-g, xen-devel, intel-gfx, linux-kernel Cc: Tian, Kevin, Reddy, Raghuveer, Dong, Eddie, Li, Susie, Cowperthwaite, David J, Zhiyuan Lv, Zhu, Libo, Wang, Hongbo Hi all, We are pleased to announce another update of Intel GVT-g for Xen. Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT). Repositories - Xen: https://github.com/01org/igvtg-xen (2016q3-4.6 branch) - Kernel: https://github.com/01org/igvtg-kernel (2016q3-4.3.0 branch) - Qemu: https://github.com/01org/igvtg-qemu (2016q3-2.3.0 branch) This update consists of: - Preliminary support new platform: 7th generation Intel® Core™ processors. For windows OS, it only supports Win10 RedStone 64 bit. - Windows 10 RedStone guest Support - Windows Guest QoS preliminary support: Administrators now are able to control the maximum amount of vGPU resource to be consumed by each VM from value 1% ~ 99%” - Display virtualization preliminary support: Besides the tracking of display register visit in guest VM, removing irrelative display pipeline info between host and guest VM - Live Migration and savevm/restorevm preliminary support on BDW with 2D/3D workload running Known issues: - At least 2GB memory is suggested for Guest Virtual Machine (win7-32/64, win8.1-64, win10-64) to run most 3D workloads - Windows8 and later Windows fast boot is not supported, the workaround is to disable power S3/S4 in HVM file by adding “acpi_S3=0, acpi_S4=0” - Sometimes when dom0 and guest has heavy workload, i915 in dom0 will trigger a false-alarmed TDR. The workaround is to disable dom0 hangcheck in dom0 grub file by adding “i915.enable_hangcheck=0” - Stability: When QoS feature is enabled, Windows guest full GPU reset is often trigger during MTBF test. This bug will be fixed in next release - Windows guest running OpenCL allocations occurs to host crash; the workaround is to disable logd in dom0 grub file by adding “i915. logd_enable =0” Next update will be around early Jan, 2017. GVT-g project portal: https://01.org/igvt-g Please subscribe mailing list: https://lists.01.org/mailman/listinfo/igvt-g More information about background, architecture and others about Intel GVT-g, can be found at: https://01.org/igvt-g https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-REWRITE%203RD%20v4.pdf https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt Note: The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. -- Thanks, Jike On 07/22/2016 01:42 PM, Jike Song wrote: > Hi all, > > We are pleased to announce another update of Intel GVT-g for Xen. > > Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT). > > Repositories > - Xen: https://github.com/01org/igvtg-xen (2016q2-4.6 branch) > - Kernel: https://github.com/01org/igvtg-kernel (2016q2-4.3.0 branch) > - Qemu: https://github.com/01org/igvtg-qemu (2016q2-2.3.0 branch) > > This update consists of: > - Support Windows 10 guest > - Support Windows Graphics driver installation on both Windows Normal mode and Safe mode > > Known issues: > - At least 2GB memory is suggested for Guest Virtual Machine (VM) to run most 3D workloads > - Dom0 S3 related feature is not supported > - Windows 8 and later versions: fast boot is not supported, the workaround is to disable power S3/S4 in HVM file by adding "acpi_S3=0, acpi_S4=0" > - Using Windows Media Player play videos may cause host crash. Using VLC to play .ogg file may cause mosaic or slow response. > - Sometimes when both dom0 and guest have heavy workloads, i915 in dom0 will trigger a false graphics reset, > the workaround is to disable dom0 hangcheck in grub file by adding "i915.enable_hangcheck=0". > > Next update will be around early Oct, 2016. > > GVT-g project portal: https://01.org/igvt-g > Please subscribe mailing list: https://lists.01.org/mailman/listinfo/igvt-g > > More information about background, architecture and others about Intel GVT-g, can be found at: > https://01.org/igvt-g > https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian > http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf > http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-REWRITE%203RD%20v4.pdf > https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt > > > Note: The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. > > -- > Thanks, > Jike > > On 04/28/2016 01:29 PM, Jike Song wrote: >> Hi all, >> >> We are pleased to announce another update of Intel GVT-g for Xen. >> >> Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT). >> >> >> Repositories >> ------------------------- >> >> Kernel: https://github.com/01org/igvtg-kernel (2016q1-4.3.0 branch) >> Xen: https://github.com/01org/igvtg-xen (2016q1-4.6 branch) >> Qemu: https://github.com/01org/igvtg-qemu (2016q1-2.3.0 branch) >> >> This update consists of: >> - Windows 10 guest is preliminarily supported in this release. >> - Implemented vgtbuffer(Indirect display) feature on SKL platform. >> - Backward compatibility support 5th generation (Broadwell) >> - Increased VGT stability on SKL platform >> - Kernel updated from drm-intel 4.2.0 to drm-intel 4.3.0 >> - Xen updated from Xen 4.5.0 to Xen 4.6.0 >> - Qemu updated from 1.6 to 2.3 >> >> Known issues: >> - At least 2GB memory is suggested for VM(win7-32/64, win8.1 64) to run most 3D workloads. >> - Windows 7 GFX driver upgrading only works on Safe mode. >> - Some media decode can't work well (will be resolved in the next version Windows GFX driver). >> - Windows8 and later Windows fast boot is not supported, whose workaround is to disable power S3/S4 in HVM file by adding "acpi_s3=0, acpi_s4=0" >> - Sometimes when dom0 and guest have heavy workload, i915 in dom0 will trigger a false graphics reset. The workaround is to disable dom0 hangcheck in dom0 grub file by adding "i915.enable_hangcheck=0" >> >> Next update will be around early July, 2016. >> >> GVT-g project portal: >> https://01.org/igvt-g >> >> Please subscribe the mailing list: >> https://lists.01.org/mailman/listinfo/igvt-g >> >> >> More information about background, architecture and others about Intel GVT-g, can be found at: >> >> https://01.org/igvt-g >> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-REWRITE%203RD%20v4.pdf >> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >> >> >> Note: The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. >> >> >> -- >> Thanks, >> Jike >> >> On 01/27/2016 02:21 PM, Jike Song wrote: >>> Hi all, >>> >>> We are pleased to announce another update of Intel GVT-g for Xen. >>> >>> Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT). >>> >>> Repositories >>> ------------------------- >>> >>> Kernel: https://github.com/01org/igvtg-kernel (2015q4-4.2.0 branch) >>> Xen: https://github.com/01org/igvtg-xen (2015q4-4.5 branch) >>> Qemu: https://github.com/01org/igvtg-qemu (xengt_public2015q4 branch) >>> >>> This update consists of: >>> >>> - 6th generation Intel Core Processor (code name: Skylake) is preliminarily supported in this release. Users could start run multiple Windows / Linux virtual machines simultaneously, and switch display among them. >>> - Backward compatibility support 4th generation Intel Core Processor (code name: Haswell) and 5th generation Intel Core Processor (code name: Broadwell). >>> - Kernel update from drm-intel 3.18.0 to drm-intel 4.2.0. >>> >>> Known issues: >>> - At least 2GB memory is suggested for a VM to run most 3D workloads. >>> - Keymap might be incorrect in guest. Config file may need to explicitly specify "keymap='en-us'". Although it looks like the default value, earlier we saw the problem of wrong keymap code if it is not explicitly set. >>> - Cannot move mouse pointer smoothly in guest by default launched by VNC mode. Configuration file need to explicitly specify "usb=1" to enable a USB bus, and "usbdevice='tablet'" to add pointer device using absolute coordinates. >>> - Running heavy 3D workloads in multiple guests for couple of hours may cause stability issue. >>> - There are still stability issues on Skylake >>> >>> >>> Next update will be around early April, 2016. >>> >>> GVT-g project portal: https://01.org/igvt-g >>> Please subscribe mailing list: https://lists.01.org/mailman/listinfo/igvt-g >>> >>> >>> More information about background, architecture and others about Intel GVT-g, can be found at: >>> >>> https://01.org/igvt-g >>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-REWRITE%203RD%20v4.pdf >>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>> >>> >>> Note: The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. >>> >>> >>> -- >>> Thanks, >>> Jike >>> >>> On 10/27/2015 05:25 PM, Jike Song wrote: >>>> Hi all, >>>> >>>> We are pleased to announce another update of Intel GVT-g for Xen. >>>> >>>> Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT); and the core logic can be easily ported to other hypervisors. >>>> >>>> >>>> Repositories >>>> >>>> Kernel: https://github.com/01org/igvtg-kernel (2015q3-3.18.0 branch) >>>> Xen: https://github.com/01org/igvtg-xen (2015q3-4.5 branch) >>>> Qemu: https://github.com/01org/igvtg-qemu (xengt_public2015q3 branch) >>>> >>>> >>>> This update consists of: >>>> >>>> - XenGT is now merged with KVMGT in unified repositories(kernel and qemu), but currently >>>> different branches for qemu. XenGT and KVMGT share same iGVT-g core logic. >>>> - fix sysfs/debugfs access seldom crash issue >>>> - fix a BUG in XenGT I/O emulation logic >>>> - improve 3d workload stability >>>> >>>> Next update will be around early Jan, 2016. >>>> >>>> >>>> Known issues: >>>> >>>> - At least 2GB memory is suggested for VM to run most 3D workloads. >>>> - Keymap might be incorrect in guest. Config file may need to explicitly specify "keymap='en-us'". Although it looks like the default value, earlier we saw the problem of wrong keymap code if it is not explicitly set. >>>> - When using three monitors, doing hotplug between Guest pause/unpause may not be able to lightup all monitors automatically. Some specific monitor issues. >>>> - Cannot move mouse pointer smoothly in guest by default launched by VNC mode. Configuration file need to explicitly specify "usb=1" to enable a USB bus, and "usbdevice='tablet'" to add pointer device using absolute coordinates. >>>> - Resume dom0 from S3 may cause some error message. >>>> - i915 unload/reload cannot works well with less than 3 vcpu when upowerd service was running >>>> - Unigen Tropics running in multiple guests will cause dom0 and guests tdr. >>>> >>>> >>>> Please subscribe the mailing list to report BUGs, discuss, and/or contribute: >>>> >>>> https://lists.01.org/mailman/listinfo/igvt-g >>>> >>>> >>>> More information about Intel GVT-g background, architecture, etc can be found at(may not be up-to-date): >>>> >>>> https://01.org/igvt-g >>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-REWRITE%203RD%20v4.pdf >>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>> >>>> >>>> Note: >>>> >>>> The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. >>>> >>>> >>>> -- >>>> Thanks, >>>> Jike >>>> >>>> On 07/07/2015 10:49 AM, Jike Song wrote: >>>>> Hi all, >>>>> >>>>> We're pleased to announce a public update to Intel Graphics Virtualization Technology(Intel GVT-g, formerly known as XenGT). >>>>> >>>>> Intel GVT-g is a full GPU virtualization solution with mediated pass-through, starting from 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Xen is currently supported on Intel Processor Graphics (a.k.a. XenGT); and the core logic can be easily ported to other hypervisors, for example, the experimental code has been released to support GVT-g running on a KVM hypervisor (a.k.a KVMGT). >>>>> >>>>> Tip of repositories >>>>> ------------------------- >>>>> >>>>> Kernel: 5b73653d5ca, Branch: master-2015Q2-3.18.0 >>>>> Qemu: 2a75bbff62c1, Branch: master >>>>> Xen: 38c36f0f511b1, Branch: master-2015Q2-4.5 >>>>> >>>>> This update consists of: >>>>> - Change time based scheduler timer to be configurable to enhance stability >>>>> - Fix stability issues that VM/Dom0 got tdr when hang up at some specific instruction on BDW >>>>> - Optimize the emulation of el_status register to enhance stability >>>>> - 2D/3D performance in linux VMs has been improved about 50% on BDW >>>>> - Fix abnormal idle power consumption issue due to wrong forcewake policy >>>>> - Fix tdr issue when running 2D/3D/Media workloads in Windows VMs simultaneously >>>>> - KVM support is still in a separate branch as prototype work. We plan to integrate KVM/Xen support together in the future releases >>>>> - Next update will be around early Oct, 2015 >>>>> >>>>> Notice that this release can support both Intel 4th generation Core CPU(code name: Haswell) and Intel 5th generation Core CPU (code name: Broadwell), while the limitation of the latter include: >>>>> * 3D conformance may have some failure >>>>> * Under high demand 3D workloads, stability issues are detected >>>>> * Multi-monitor scenario is not fully tested, while single monitor of VGA/HDMI/DP/eDP should just work >>>>> * Hotplug DP may cause black screen even on native environment >>>>> >>>>> Where to get >>>>> >>>>> kernel: https://github.com/01org/XenGT-Preview-kernel.git >>>>> xen: https://github.com/01org/XenGT-Preview-xen.git >>>>> qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>>> >>>>> >>>>> We have a mailing list for GVT-g development, bug report and technical discussion: >>>>> >>>>> https://lists.01.org/mailman/listinfo/igvt-g >>>>> >>>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>>> >>>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>>> >>>>> >>>>> Note: The XenGT project should be considered a work in progress. As such it is not a complete product nor should it be considered one. Extra care should be taken when testing and configuring a system to use the XenGT project. >>>>> >>>>> >>>>> -- >>>>> Thanks, >>>>> Jike >>>>> >>>>> On 04/10/2015 09:23 PM, Jike Song wrote: >>>>>> Hi all, >>>>>> >>>>>> We're pleased to announce a public update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >>>>>> >>>>>> Tip of repositories >>>>>> ------------------------- >>>>>> >>>>>> Kernel: a011c9f953e, Branch: master-2015Q1-3.18.0 >>>>>> Qemu: 2a75bbff62c1, Branch: master >>>>>> Xen: 38c36f0f511b1, Branch: master-2015Q1-4.5 >>>>>> >>>>>> Summary this update >>>>>> ------------------------- >>>>>> - Preliminary Broadwell support. >>>>>> - kernel update from drm-intel 3.17.0 to drm-intel 3.18.0(tag: drm-intel-next-fixes-2014-12-17, notice that i915 driver code is much newer than kernel stable version). >>>>>> - Next update will be around early July, 2015. >>>>>> - KVM support is still in a separate branch as prototype work. We plan to integrate KVM/Xen support together in future releases. >>>>>> >>>>>> This update consists of: >>>>>> - gvt-g core logic code was moved into i915 driver directory. >>>>>> - Host mediation is used for dom0 i915 driver access, instead of de-privileged dom0. >>>>>> - The Xen-specific code was separated from vgt core logic into a new file "driver/xen/xengt.c". >>>>>> - Broadwell is preliminarily supported in this release. Users could start multiple linux/windows 64-bit virtual machines simultaneously, and perform display switch among them. >>>>>> >>>>>> Notice that it is still preliminary release for BDW, which is not yet in the same level of HSW release. Differences include: >>>>>> * Power/performance tuning on BDW is not yet done. >>>>>> * Stability needs to be improved. >>>>>> * No 32-bit guest OS support. >>>>>> * Multi-monitor scenario is not fully tested, while single monitor of VGA/HDMI/DP/eDP should just work. >>>>>> >>>>>> >>>>>> Where to get: >>>>>> ----------------- >>>>>> kerenl: https://github.com/01org/XenGT-Preview-kernel.git >>>>>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>>>>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>>>> >>>>>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>>>>> https://github.com/01org/XenGT-Preview-kernel/blob/master-2015Q1-3.18.0/XenGT_Setup_Guide_2015Q1.pdf >>>>>> >>>>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>>>> >>>>>> The previous update can be found here: >>>>>> http://lists.xen.org/archives/html/xen-devel/2014-12/msg00474.html >>>>>> >>>>>> >>>>>> Note >>>>>> --------------- >>>>>> The XenGT project should be considered a work in progress, As such it is not a complete product nor should it be considered one., Extra care should be taken when testing and configuring a system to use the XenGT project. >>>>>> >>>>>> >>>>>> -- >>>>>> Thanks, >>>>>> Jike >>>>>> >>>>>> On 01/09/2015 04:51 PM, Jike Song wrote: >>>>>>> Hi all, >>>>>>> >>>>>>> We're pleased to announce a public update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. The XenGT project should be considered a work in progress, As such it is not a complete product nor should it be considered one., Extra care should be taken when testing and configuring a system to use the XenGT project. >>>>>>> >>>>>>> The news of this update: >>>>>>> >>>>>>> - kernel update from 3.14.1 to drm-intel 3.17.0. >>>>>>> - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet. >>>>>>> - Next update will be around early Apr, 2015. >>>>>>> >>>>>>> This update consists of: >>>>>>> >>>>>>> - Including some bug fixes and stability enhancement. >>>>>>> - Making XenGT device model to be aware of Broadwell. In this version BDW is not yet functioning. >>>>>>> - Available Fence registers number is changed to 32 from 16 to align with HSW hardware. >>>>>>> - New cascade interrupt framework for supporting interrupt virtualization on both Haswell and Broadwell. >>>>>>> - Add back the gem_vgtbuffer. The previous release did not build that module for 3.14 kernel. In this release, the module is back and rebased to 3.17. >>>>>>> - Enable the irq based context switch in vgt driver, which will help reduce the cpu utilization while doing context switch, it is enabled by default, and can be turn off by kernel flag irq_based_ctx_switch. >>>>>>> >>>>>>> >>>>>>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>>>>>> >>>>>>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >>>>>>> >>>>>>> The new source codes are available at the updated github repos: >>>>>>> >>>>>>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>>>>>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>>>>>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>>>>> >>>>>>> >>>>>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>>>>> >>>>>>> >>>>>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>>>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>>>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>>>>> >>>>>>> >>>>>>> >>>>>>> The previous update can be found here: >>>>>>> >>>>>>> >>>>>>> http://lists.xen.org/archives/html/xen-devel/2014-12/msg00474.html >>>>>>> >>>>>>> >>>>>>> >>>>>>> Appreciate your comments! >>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Thanks, >>>>>>> Jike >>>>>>> >>>>>>> >>>>>>> On 12/04/2014 10:45 AM, Jike Song wrote: >>>>>>>> Hi all, >>>>>>>> >>>>>>>> We're pleased to announce a public release to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >>>>>>>> >>>>>>>> >>>>>>>> The news of this update: >>>>>>>> >>>>>>>> >>>>>>>> - kernel update from 3.11.6 to 3.14.1 >>>>>>>> >>>>>>>> - We plan to integrate Intel GVT-g as a feature in i915 driver. That effort is still under review, not included in this update yet >>>>>>>> >>>>>>>> - Next update will be around early Jan, 2015 >>>>>>>> >>>>>>>> >>>>>>>> This update consists of: >>>>>>>> >>>>>>>> - Windows HVM support with driver version 15.33.3910 >>>>>>>> >>>>>>>> - Stability fixes, e.g. stabilize GPU, the GPU hang occurrence rate becomes rare now >>>>>>>> >>>>>>>> - Hardware Media Acceleration for Decoding/Encoding/Transcoding, VC1, H264 etc. format supporting >>>>>>>> >>>>>>>> - Display enhancements, e.g. DP type is supported for virtual PORT >>>>>>>> >>>>>>>> - Display port capability virtualization: with this feature, dom0 manager could freely assign virtual DDI ports to VM, not necessary to check whether the corresponding physical DDI ports are available >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>>>>>>> >>>>>>>> >>>>>>>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> The new source codes are available at the updated github repos: >>>>>>>> >>>>>>>> >>>>>>>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>>>>>>> >>>>>>>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>>>>>>> >>>>>>>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>>>>>> >>>>>>>> >>>>>>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>>>>>> >>>>>>>> >>>>>>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>>>>>> >>>>>>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>>>>>> >>>>>>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>>>>>> >>>>>>>> >>>>>>>> The previous update can be found here: >>>>>>>> >>>>>>>> >>>>>>>> http://lists.xen.org/archives/html/xen-devel/2014-07/msg03248.html >>>>>>>> >>>>>>>> >>>>>>>> Appreciate your comments! >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> Thanks, >>>>>>>> Jike >>>>>>>> >>>>>>>> On 07/25/2014 04:31 PM, Jike Song wrote: >>>>>>>>> Hi all, >>>>>>>>> >>>>>>>>> We're pleased to announce an update to Intel Graphics Virtualization Technology (Intel GVT-g, formerly known as XenGT). Intel GVT-g is a complete vGPU solution with mediated pass-through, supported today on 4th generation Intel Core(TM) processors with Intel Graphics processors. A virtual GPU instance is maintained for each VM, with part of performance critical resources directly assigned. The capability of running native graphics driver inside a VM, without hypervisor intervention in performance critical paths, achieves a good balance among performance, feature, and sharing capability. Though we only support Xen on Intel Processor Graphics so far, the core logic can be easily ported to other hypervisors. >>>>>>>>> >>>>>>>>> The news of this update: >>>>>>>>> >>>>>>>>> - Project code name is "XenGT", now official name is Intel Graphics Virtualization Technology (Intel GVT-g) >>>>>>>>> - Currently Intel GVT-g supports Intel Processor Graphics built into 4th generation Intel Core processors - Haswell platform >>>>>>>>> - Moving forward, XenGT will change to quarterly release cadence. Next update will be around early October, 2014. >>>>>>>>> >>>>>>>>> This update consists of: >>>>>>>>> >>>>>>>>> - Stability fixes, e.g. stable DP support >>>>>>>>> - Display enhancements, e.g. virtual monitor support. Users can define a virtual monitor type with customized EDID for virtual machines, not necessarily the same as physical monitors. >>>>>>>>> - Improved support for GPU recovery >>>>>>>>> - Experimental Windows HVM support. To download the experimental version, see setup guide for details >>>>>>>>> - Experimental Hardware Media Acceleration for decoding. >>>>>>>>> >>>>>>>>> >>>>>>>>> Please refer to the new setup guide, which provides step-to-step details about building/configuring/running Intel GVT-g: >>>>>>>>> >>>>>>>>> https://github.com/01org/XenGT-Preview-kernel/blob/master/XenGT_Setup_Guide.pdf >>>>>>>>> >>>>>>>>> >>>>>>>>> The new source codes are available at the updated github repos: >>>>>>>>> >>>>>>>>> Linux: https://github.com/01org/XenGT-Preview-kernel.git >>>>>>>>> Xen: https://github.com/01org/XenGT-Preview-xen.git >>>>>>>>> Qemu: https://github.com/01org/XenGT-Preview-qemu.git >>>>>>>>> >>>>>>>>> >>>>>>>>> More information about Intel GVT-g background, architecture, etc can be found at: >>>>>>>>> >>>>>>>>> https://www.usenix.org/conference/atc14/technical-sessions/presentation/tian >>>>>>>>> http://events.linuxfoundation.org/sites/events/files/slides/XenGT-Xen%20Summit-v7_0.pdf >>>>>>>>> https://01.org/xen/blogs/srclarkx/2013/graphics-virtualization-xengt >>>>>>>>> >>>>>>>>> The previous update can be found here: >>>>>>>>> >>>>>>>>> http://lists.xen.org/archives/html/xen-devel/2014-02/msg01848.html >>>>>>>>> >>>>>>>>> Appreciate your comments! >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Thanks, >>>>>>>>> Jike >>>>>>>>> _______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org https://lists.xen.org/xen-devel ^ permalink raw reply [flat|nested] 49+ messages in thread
end of thread, other threads:[~2016-11-06 14:59 UTC | newest]
Thread overview: 49+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <53D215D3.50608@intel.com>
2014-07-29 10:09 ` [Intel-gfx] [Announcement] Updates to XenGT - a Mediated Graphics Passthrough Solution from Intel Dario Faggioli
[not found] ` <1406628570.4038.37.camel@Solace>
2014-07-30 9:39 ` Jike Song
[not found] ` <53D8BD5E.2090601@intel.com>
2014-07-31 13:58 ` Dario Faggioli
2014-12-04 2:45 ` [Intel-gfx] [Announcement] 2014-Q3 release of " Jike Song
[not found] ` <547FCAAD.2060406@intel.com>
2014-12-04 10:20 ` Fabio Fantoni
[not found] ` <5480355E.4050502@m2r.biz>
2014-12-04 10:26 ` Tian, Kevin
2015-01-09 8:51 ` [Intel-gfx] [Announcement] 2015-Q1 " Jike Song
[not found] ` <54AF967B.3060503@intel.com>
2015-01-12 3:04 ` [Intel-gfx] [Announcement] 2014-Q4 " Jike Song
2015-04-10 13:23 ` [Intel-gfx] [Announcement] 2015-Q1 " Jike Song
[not found] ` <5527CEC4.9080700@intel.com>
2015-07-07 2:49 ` [Intel-gfx] [Announcement] 2015-Q2 " Jike Song
[not found] ` <559B3E38.1080707@intel.com>
2015-10-27 9:25 ` [Intel-gfx] [Announcement] 2015-Q3 " Jike Song
[not found] ` <562F4311.9@intel.com>
2015-11-18 18:12 ` Alex Williamson
[not found] ` <1447870341.4697.92.camel@redhat.com>
2015-11-19 4:06 ` Tian, Kevin
[not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F7152DB@SHSMSX101.ccr.corp.intel.com>
2015-11-19 7:22 ` Jike Song
2015-11-19 8:40 ` Gerd Hoffmann
[not found] ` <564D78D0.80904@intel.com>
2015-11-19 15:32 ` Stefano Stabellini
[not found] ` <alpine.DEB.2.02.1511191529370.1107@kaball.uk.xensource.com>
2015-11-19 15:49 ` Paolo Bonzini
2015-11-19 15:52 ` Alex Williamson
[not found] ` <564DEF9A.3010901@redhat.com>
2015-11-19 16:12 ` Stefano Stabellini
[not found] ` <1447948366.4697.119.camel@redhat.com>
2015-11-20 2:58 ` Jike Song
[not found] ` <564E8C51.6070706@intel.com>
2015-11-20 4:22 ` Alex Williamson
[not found] ` <1447993371.4697.257.camel@redhat.com>
2015-11-20 5:51 ` Jike Song
[not found] ` <564EB4F2.9080605@intel.com>
2015-11-20 6:01 ` Tian, Kevin
2015-11-20 16:40 ` Alex Williamson
[not found] ` <1448037640.4697.266.camel@redhat.com>
2015-11-23 4:52 ` [Qemu-devel] " Jike Song
2015-11-19 20:02 ` Alex Williamson
[not found] ` <1447922452.25140.39.camel@redhat.com>
2015-11-19 11:09 ` Paolo Bonzini
[not found] ` <564DADCC.2030702@redhat.com>
2015-11-20 2:46 ` Jike Song
2015-11-20 6:12 ` Tian, Kevin
[not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F717718@SHSMSX101.ccr.corp.intel.com>
2015-11-20 8:26 ` Gerd Hoffmann
[not found] ` <1448007960.6904.22.camel@redhat.com>
2015-11-20 8:36 ` Tian, Kevin
[not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F717B17@SHSMSX101.ccr.corp.intel.com>
2015-11-20 8:46 ` Zhiyuan Lv
2015-12-03 6:57 ` Tian, Kevin
[not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F72B52A@SHSMSX101.ccr.corp.intel.com>
2015-12-04 10:13 ` Gerd Hoffmann
[not found] ` <1447963356.4697.184.camel@redhat.com>
2015-11-20 7:09 ` Tian, Kevin
2015-11-20 8:10 ` Tian, Kevin
[not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F717855@SHSMSX101.ccr.corp.intel.com>
2015-11-20 17:03 ` Alex Williamson
[not found] ` <AADFC41AFE54684AB9EE6CBC0274A5D15F717951@SHSMSX101.ccr.corp.intel.com>
2015-11-20 17:25 ` Alex Williamson
[not found] ` <1448040302.4697.300.camel@redhat.com>
2015-11-23 5:05 ` Jike Song
2015-11-24 11:19 ` Daniel Vetter
[not found] ` <20151124111917.GO17050@phenom.ffwll.local>
2015-11-24 11:49 ` Chris Wilson
2015-11-24 12:38 ` Gerd Hoffmann
[not found] ` <1448368735.27648.110.camel@redhat.com>
2015-11-24 13:31 ` Daniel Vetter
[not found] ` <20151124133135.GY17050@phenom.ffwll.local>
2015-11-24 14:12 ` Gerd Hoffmann
[not found] ` <1448374351.27648.128.camel@redhat.com>
2015-11-24 14:19 ` Daniel Vetter
2016-01-27 6:21 ` [Intel-gfx] [Announcement] 2015-Q4 " Jike Song
[not found] ` <56A861D3.5090007@intel.com>
2016-04-28 5:29 ` [Intel-gfx] [Announcement] 2016-Q1 " Jike Song
[not found] ` <57219F9F.9070602@intel.com>
2016-07-22 5:42 ` [Intel-gfx] [Announcement] 2016-Q2 " Jike Song
[not found] ` <5791B25C.8080109@intel.com>
2016-11-06 14:59 ` [Intel-gfx] [Announcement] 2016-Q3 " Jike Song
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).