* run xen on hikey board
@ 2016-04-14 11:39 Safa Hamza
2016-04-14 19:13 ` Julien Grall
0 siblings, 1 reply; 4+ messages in thread
From: Safa Hamza @ 2016-04-14 11:39 UTC (permalink / raw)
To: Xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 211 bytes --]
hello
to build xen on hikey board ..only should i write
make dist-xen XEN_TARGET_ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
there is no CONFIG_EARLY_PRINTK like other board (omap5432 , cubie ..)
Regards
[-- Attachment #1.2: Type: text/html, Size: 924 bytes --]
[-- Attachment #2: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: run xen on hikey board
2016-04-14 11:39 run xen on hikey board Safa Hamza
@ 2016-04-14 19:13 ` Julien Grall
2016-04-15 8:42 ` Safa Hamza
0 siblings, 1 reply; 4+ messages in thread
From: Julien Grall @ 2016-04-14 19:13 UTC (permalink / raw)
To: Safa Hamza, Xen-devel
On 14/04/2016 12:39, Safa Hamza wrote:
> hello
Hello,
> to build xen on hikey board ..only should i write
>
> make dist-xen XEN_TARGET_ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
>
>
>
> there is no CONFIG_EARLY_PRINTK like other board (omap5432 , cubie ..)
Nobody adds earlyprintk support for the hikey board. Feel free to send a
patch for it.
However, CONFIG_EARLY_PRINTK should not be necessary unless you are
trying to debug early boot.
Regards,
--
Julien Grall
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: run xen on hikey board
2016-04-14 19:13 ` Julien Grall
@ 2016-04-15 8:42 ` Safa Hamza
2016-04-15 9:19 ` Julien Grall
0 siblings, 1 reply; 4+ messages in thread
From: Safa Hamza @ 2016-04-15 8:42 UTC (permalink / raw)
To: Julien Grall; +Cc: Xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 850 bytes --]
thanks for your reply
can you explain more .. which patch you mean..
writing " make dist-xen XEN_TARGET_ARCH=arm64
CROSS_COMPILE=aarch64-linux-gnu-"
is not enough for building xen on hikey board !!
because i didn't find any patch for xen
Regards
On Thu, Apr 14, 2016 at 9:13 PM, Julien Grall <julien.grall@arm.com> wrote:
> On 14/04/2016 12:39, Safa Hamza wrote:
>
>> hello
>>
>
> Hello,
>
> to build xen on hikey board ..only should i write
>>
>> make dist-xen XEN_TARGET_ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
>>
>>
>>
>> there is no CONFIG_EARLY_PRINTK like other board (omap5432 , cubie ..)
>>
>
> Nobody adds earlyprintk support for the hikey board. Feel free to send a
> patch for it.
>
> However, CONFIG_EARLY_PRINTK should not be necessary unless you are trying
> to debug early boot.
>
> Regards,
>
> --
> Julien Grall
>
[-- Attachment #1.2: Type: text/html, Size: 2248 bytes --]
[-- Attachment #2: Type: text/plain, Size: 126 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: run xen on hikey board
2016-04-15 8:42 ` Safa Hamza
@ 2016-04-15 9:19 ` Julien Grall
0 siblings, 0 replies; 4+ messages in thread
From: Julien Grall @ 2016-04-15 9:19 UTC (permalink / raw)
To: Safa Hamza; +Cc: Xen-devel
Hello,
Please avoid top-posting on the mailing list.
On 15/04/16 09:42, Safa Hamza wrote:
> thanks for your reply
>
> can you explain more .. which patch you mean..
> writing " make dist-xen XEN_TARGET_ARCH=arm64
> CROSS_COMPILE=aarch64-linux-gnu-"
I meant adding earlyprintk support for the hikey board.
>
> is not enough for building xen on hikey board !!
> because i didn't find any patch for xen
There is no patch needed for Xen unless you want to use earlyprintk for
early debugging.
There is a wiki page to boot Xen on the hikey [1]. Please follow it and
ask your questions on xen-users as this is not an hypervisor issue.
> Regards
Regards,
[1] http://wiki.xenproject.org/wiki/HiKey
--
Julien Grall
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-04-15 9:19 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-14 11:39 run xen on hikey board Safa Hamza
2016-04-14 19:13 ` Julien Grall
2016-04-15 8:42 ` Safa Hamza
2016-04-15 9:19 ` Julien Grall
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).