xen-devel.lists.xenproject.org archive mirror
 help / color / mirror / Atom feed
From: Dushyant Behl <myselfdushyantbehl@gmail.com>
To: Ian Campbell <ijc@hellion.org.uk>
Cc: sstabellini@kernel.org, Wei Liu <wei.liu2@citrix.com>,
	Stefano Stabellini <stefano.stabellini@eu.citrix.com>,
	Dushyant K Behl <dushyantbehl@in.ibm.com>,
	Xen Devel <xen-devel@lists.xen.org>,
	Julien Grall <julien.grall@arm.com>,
	Meng Xu <xumengpanda@gmail.com>
Subject: Re: Running Xen on Nvidia Jetson-TK1
Date: Thu, 14 Apr 2016 21:24:18 +0530	[thread overview]
Message-ID: <CAHF350JdJDA3w4AgWk1V5TMwW2WE_wjxBrEVUmZ9sn1+X6kSvA@mail.gmail.com> (raw)
In-Reply-To: <1460118423.1749.13.camel@hellion.org.uk>

Hi Everyone,

On Fri, Apr 8, 2016 at 5:57 PM, Ian Campbell <ijc@hellion.org.uk> wrote:
>> > In your patch for *Hacky* support for Jetsok-TK1 you said that you
>> > were able to run guests on
>> > Jetson-tk1 board with Xen. Can I know which kernel version you used as
>> > dom0 (and possibly domU guests)?
>
> I'm afraid I don't remember. It would probably either have been some
> current-ish upstream kernel from the time, or possibly a Debian kernel
> from around the time. So maybe something 3.16-ish?

@Ian Thanks for the Reply.

@Julien, Thanks a lot, your patch for GIC dtb node worked and the
linux kernel is now able to enable the arch timer.
(Although I needed to modify the code manually as the tree I'm using
is older Xen-4.6, and maybe the patch was against the latest version
of xen).

The kernel is able to initialize itself but it fails while initializing some
nvidia devices in the boot process. I've posted the log here,
Could this also be an issue with the device tree or this is something
related to the kernel?

- UART enabled -
- CPU 00000000 booting -
- Xen starting in Hyp mode -
- Zero BSS -
- Setting up control registers -
- Turning on paging -
- Ready -
(XEN) Checking for initrd in /chosen
(XEN) RAM: 0000000080000000 - 00000000ffefffff
(XEN)
(XEN) MODULE[0]: 0000000082000000 - 0000000082010000 Device Tree
(XEN) MODULE[1]: 0000000081000000 - 00000000815443f0 Kernel
console=hvc0 root=/dev/mmcblk0p1 rw rootwait
(XEN)  RESVD[0]: 0000000082000000 - 0000000082010000
(XEN)
(XEN) Command line: console=dtuart dtuart=serial0 dom0_mem=512M
sync_console log_lvl=all guest_loglvl=all
(XEN) Placing Xen at 0x00000000ffc00000-0x00000000ffe00000
(XEN) Update BOOTMOD_XEN from 00000000fd000000-00000000fd0f9701 =>
00000000ffc00000-00000000ffcf9701
(XEN) Xen heap: 00000000fa000000-00000000fe000000 (16384 pages)
(XEN) Dom heap: 507648 pages
(XEN) Domain heap initialised
(XEN) Platform: TEGRA124
(XEN) Looking for dtuart at "s Xen 4.6-unstable
(XEN) Xen version 4.6-unstable (root@) (arm-linux-gnueabihf-gcc
(Ubuntu/Linaro 4.7.3-11ubuntu1) 4.7.3) debug=y Mon Apr 11 09:20:25 UTC
2016
(XEN) Latest ChangeSet:
(XEN) Console output is synchronous.
(XEN) Processor: 413fc0f3: "ARM Limited", variant: 0x3, part 0xc0f, rev 0x3
(XEN) 32-bit Execution:
(XEN)   Processor Features: 00001131:00011011
(XEN)     Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jazelle
(XEN)     Extensions: GenericTimer Security
(XEN)   Debug Features: 02010555
(XEN)   Auxiliary Features: 00000000
(XEN)   Memory Model Features: 10201105 40000000 01240000 02102211
(XEN)  ISA Features: 02101110 13112111 21232041 11112131 10011142 00000000
(XEN) Using PSCI-0.1 for SMP bringup
(XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 12000 KHz
(XEN) GICv2 initialization:
(XEN)         gic_dist_addr=0000000050041000
(XEN)         gic_cpu_addr=0000000050042000
(XEN)         gic_hyp_addr=0000000050044000
(XEN)         gic_vcpu_addr=0000000050046000
(XEN)         gic_maintenance_irq=25
(XEN) GICv2: 192 lines, 4 cpus, secure (IID 0000043b).
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) I/O virtualisation disabled
(XEN) Allocated console ring of 32 KiB.
(XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0
(XEN) Bringing up CPU1
- CPU 00000001 booting -
- Xen starting in Hyp mode -
- Setting up control registers -
- Turning on paging -
- Ready -
(XEN) CPU 1 booted.
(XEN) Bringing up CPU2
- CPU 00000002 booting -
- Xen starting in Hyp mode -
- Setting up control registers -
- Turning on paging -
- Ready -
(XEN) CPU 2 booted.
(XEN) Bringing up CPU3
- CPU 00000003 booting -
- Xen starting in Hyp mode -
- Setting up control registers -
- Turning on paging -
- Ready -
(XEN) CPU 3 booted.
(XEN) Brought up 4 CPUs
(XEN) P2M: 40-bit IPA
(XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Loading kernel from boot module @ 0000000081000000
(XEN) zImage: no appended dtb
(XEN) zImage32 Probe successful
(XEN) Allocating 1:1 mappings totalling 512MB for dom0:
(XEN) BANK[0] 0x000000a0000000-0x000000c0000000 (512MB)
(XEN) Additional MMIO 40000-40040 (IRAM)
(XEN) Additional MMIO 54200-54240 (Display A)
(XEN) Additional MMIO 54240-54280 (Display B)
(XEN) Additional MMIO 6000f-60010 (EXCEPTION VECTORS)
(XEN) Additional MMIO 6000c-6000d (SYSREG)
(XEN) Additional MMIO 1000-1001 (PCI CFG0)
(XEN) Additional MMIO 1001-1002 (PCI CFG1)
(XEN) Additional MMIO 12000-12010 (PCI IO)
(XEN) Additional MMIO 13000-20000 (PCI MEM)
(XEN) Additional MMIO 20000-40000 (PCI MEM (PREFETCH))
(XEN) Additional IRQ 105 (DISPLAY)
(XEN) TEGRA: Routing IRQ105 to dom0, ICTLR2, mask 0x000200
(XEN) Additional IRQ 106 (DISPLAY B)
(XEN) TEGRA: Routing IRQ106 to dom0, ICTLR2, mask 0x000400
(XEN) Loading zImage from 0000000081000000 to 00000000a7a00000-00000000a7f443f0
(XEN) Allocating PPI 16 for event channel interrupt
(XEN) Loading dom0 DTB to 0x00000000a8000000-0x00000000a800f1d0
(XEN) Scrubbing Free RAM on 1 nodes using 4 CPUs
(XEN) ....done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen)
(XEN) Freed 272kB init memory.
(XEN) DOM0: Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.0-196898-g2e68ed9-dirty
(root@ubuntu-server) (gcc version 4.7.3 (Ubuntu/Linaro
4.7.3-11ubuntu1) ) #3 SMP PREEMPT Wed Apr 13 08:28:23 UTC 2016
[    0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=30c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: NVIDIA Tegra124 Jetson TK1
[    0.000000] cma: Reserved 64 MiB at 0x00000000bc000000
[    0.000000] Forcing write-allocate cache policy for SMP
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] PERCPU: Embedded 12 pages/cpu @dbb77000 s19712 r8192
d21248 u49152
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 130048
[    0.000000] Kernel command line: console=hvc0 root=/dev/mmcblk0p1 rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 441884K/524288K available (7657K kernel code,
634K rwdata, 2584K rodata, 484K init, 383K bss, 16868K reserved,
65536K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0a08c10   (10244 kB)
[    0.000000]       .init : 0xc0a09000 - 0xc0a82000   ( 484 kB)
[    0.000000]       .data : 0xc0a82000 - 0xc0b20bec   ( 635 kB)
[    0.000000]        .bss : 0xc0b23000 - 0xc0b82ea0   ( 384 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] /interrupt-controller@60004000: 160 interrupts
forwarded to /interrupt-controller
[    0.000000] L2C: failed to init: -19
[    0.000000] Architected cp15 timer(s) running at 12.00MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff
max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
[    0.000005] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps
every 4398046511096ns
[    0.000018] Switching to timer-based delay loop, resolution 83ns
[    0.000500] Console: colour dummy device 80x30
[    0.000521] Calibrating delay loop (skipped), value calculated
using timer frequency.. 24.00 BogoMIPS (lpj=120000)
[    0.000536] pid_max: default: 32768 minimum: 301
[    0.000948] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000959] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.002350] Initializing cgroup subsys freezer
[    0.002376] Initializing cgroup subsys debug
[    0.002431] CPU: Testing write buffer coherency: ok
[    0.002752] /cpus/cpu@0 missing clock-frequency property
[    0.002794] /cpus/cpu@1 missing clock-frequency property
[    0.002835] /cpus/cpu@2 missing clock-frequency property
[    0.002877] /cpus/cpu@3 missing clock-frequency property
[    0.002890] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.003106] Xen 4.6 support found, events_irq=19
gnttab_frame=0x0000000068000000
[    0.003265] xen:grant_table: Grant tables using version 1 layout
[    0.003313] Grant table initialized
[    0.003378] xen:events: Using FIFO-based ABI
[    0.003398] Xen: initializing cpu0
[    0.003496] Setting up static identity map for 0xa0008480 - 0xa0008518
[    0.020405] Tegra Revision: A01 SKU: 129 CPU Process: 1 Core Process: 1
[    0.030786] Xen: initializing cpu1
[    0.030840] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.040798] Xen: initializing cpu2
[    0.040851] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.050839] Xen: initializing cpu3
[    0.050890] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.051037] Brought up 4 CPUs
[    0.051063] SMP: Total of 4 processors activated (96.00 BogoMIPS).
[    0.051071] CPU: All CPU(s) started in SVC mode.
[    0.052162] devtmpfs: initialized
[    0.100284] VFP support v0.3: implementor 41 architecture 4 part 30
variant f rev 0
[    0.101016] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.103189] pinctrl core: initialized pinctrl subsystem
[    0.105124] NET: Registered protocol family 16
[    0.106377] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.108915] xen:swiotlb_xen: Warning: only able to allocate 4 MB
for software IO TLB
[    0.110050] software IO TLB [mem 0xbac00000-0xbb000000] (4MB)
mapped at [dac00000-daffffff]
[    0.133440] hw-breakpoint: Failed to enable monitor mode on CPU 1.
[    0.183494] xen:balloon: Initialising balloon driver
[    0.184060] xen_balloon: Initialising balloon driver
[    0.187333] +USB0_VBUS_SW: Failed to request enable GPIO108: -517
[    0.187556] reg-fixed-voltage regulators:regulator@7: Failed to
register regulator: -517
[    0.188011] +5V_USB_HS: Failed to request enable GPIO109: -517
[    0.188224] reg-fixed-voltage regulators:regulator@8: Failed to
register regulator: -517
[    0.188785] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517
[    0.188995] reg-fixed-voltage regulators:regulator@11: Failed to
register regulator: -517
[    0.189447] +5V_HDMI_CON: Failed to request enable GPIO86: -517
[    0.189655] reg-fixed-voltage regulators:regulator@12: Failed to
register regulator: -517
[    0.190105] +5V_SATA: Failed to request enable GPIO242: -517
[    0.190352] reg-fixed-voltage regulators:regulator@13: Failed to
register regulator: -517
[    0.190806] +12V_SATA: Failed to request enable GPIO242: -517
[    0.191013] reg-fixed-voltage regulators:regulator@14: Failed to
register regulator: -517
[    0.192568] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x40201000, IAS 32
[    0.192786] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x40201000, IAS 36
[    0.192994] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x40201000, IAS 40
[    0.193217] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x40201000, IAS 42
[    0.193467] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x40201000, IAS 44
[    0.193673] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x40201000, IAS 48
[    0.193892] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x02004000, IAS 32
[    0.194553] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x02004000, IAS 36
[    0.195292] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x02004000, IAS 40
[    0.195949] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x02004000, IAS 42
[    0.196604] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x02004000, IAS 44
[    0.197262] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x02004000, IAS 48
[    0.197974] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x20010000, IAS 32
[    0.200524] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x20010000, IAS 36
[    0.203036] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x20010000, IAS 40
[    0.205604] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x20010000, IAS 42
[    0.208285] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x20010000, IAS 44
[    0.210797] arm-lpae io-pgtable: selftest: pgsize_bitmap 0x20010000, IAS 48
[    0.213295] arm-lpae io-pgtable: selftest: completed with 18 PASS 0 FAIL
[    0.214020] vgaarb: loaded
[    0.215731] SCSI subsystem initialized
[    0.216928] usbcore: registered new interface driver usbfs
[    0.217108] usbcore: registered new interface driver hub
[    0.217316] usbcore: registered new device driver usb
[    0.221769] Linux video capture interface: v2.00
[    0.221900] pps_core: LinuxPPS API ver. 1 registered
[    0.221908] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@linux.it>
[    0.221980] PTP clock support registered
[    0.223885] Advanced Linux Sound Architecture Driver Initialized.
[    0.225412] Bluetooth: Core ver 2.20
[    0.225493] NET: Registered protocol family 31
[    0.225502] Bluetooth: HCI device and connection manager initialized
[    0.225533] Bluetooth: HCI socket layer initialized
[    0.225555] Bluetooth: L2CAP socket layer initialized
[    0.225611] Bluetooth: SCO socket layer initialized
[    0.226236] cfg80211: Calling CRDA to update world regulatory domain
[    0.227195] clocksource: Switched to clocksource arch_sys_counter
[    0.362983] NET: Registered protocol family 2
[    0.364477] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.364539] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.364637] TCP: Hash tables configured (established 4096 bind 4096)
[    0.364907] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.364935] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.365428] NET: Registered protocol family 1
[    0.366382] RPC: Registered named UNIX socket transport module.
[    0.366392] RPC: Registered udp transport module.
[    0.366399] RPC: Registered tcp transport module.
[    0.366406] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.370824] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.374618] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.383547] io scheduler noop registered (default)
[    0.394250] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[    0.394303] tegra-pcie 1003000.pcie-controller: Failed to get
supply 'avddio-pex': -517
[    0.406173] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver
register 32 channels
[    0.406682] tegra-pmc 7000e400.pmc: emergency thermal reset enabled
[    0.408157] xen:xen_evtchn: Event-channel device installed
[    1.317385] console [hvc0] enabled
[    1.320937] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.333011] [drm] Initialized drm 1.1.0 20060810
[    1.368145] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
[    1.388139] loop: module loaded
[    1.390403] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write
[    2.387235] tegra-i2c 7000d000.i2c: i2c transfer timed out
[    2.390845] as3722 4-0040: ASIC_ID1 read failed: -110
[    2.396044] as3722: probe of 4-0040 failed with error -110
[    2.402569] tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
[    2.408180] tegra-ahci 70027000.sata: Failed to get regulators
[    3.387251] cfg80211: Calling CRDA to update world regulatory domain
[    3.417234] ------------[ cut here ]------------
[    3.419967] WARNING: CPU: 1 PID: 1 at
drivers/spi/spi-tegra114.c:838
tegra_spi_transfer_one_message+0x410/0x438()
[    3.430302] Modules linked in:
[    3.433392] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
4.1.0-196898-g2e68ed9-dirty #3
[    3.441203] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
[    3.447560] [<c00177d8>] (unwind_backtrace) from [<c0013040>]
(show_stack+0x10/0x14)
[    3.455327] [<c0013040>] (show_stack) from [<c073b7e8>]
(dump_stack+0x84/0xd0)
[    3.462622] [<c073b7e8>] (dump_stack) from [<c0028b84>]
(warn_slowpath_common+0x78/0xb4)
[    3.470766] [<c0028b84>] (warn_slowpath_common) from [<c0028bdc>]
(warn_slowpath_null+0x1c/0x24)
[    3.479606] [<c0028bdc>] (warn_slowpath_null) from [<c03ed068>]
(tegra_spi_transfer_one_message+0x410/0x438)
[    3.489485] [<c03ed068>] (tegra_spi_transfer_one_message) from
[<c03e9d68>] (__spi_pump_messages+0x36c/0x674)
[    3.499462] [<c03e9d68>] (__spi_pump_messages) from [<c03ea194>]
(__spi_sync+0x124/0x1a8)
[    3.507701] [<c03ea194>] (__spi_sync) from [<c03ea2ec>]
(spi_write_then_read+0xc4/0x174)
[    3.515814] [<c03ea2ec>] (spi_write_then_read) from [<c03e6904>]
(m25p80_read_reg+0x34/0x64)
[    3.524321] [<c03e6904>] (m25p80_read_reg) from [<c03e6fec>]
(spi_nor_read_id+0x20/0xa8)
[    3.532483] [<c03e6fec>] (spi_nor_read_id) from [<c03e7ac8>]
(spi_nor_scan+0x2a8/0x80c)
[    3.540524] [<c03e7ac8>] (spi_nor_scan) from [<c03e6840>]
(m25p_probe+0xb0/0x140)
[    3.548065] [<c03e6840>] (m25p_probe) from [<c03e96c8>]
(spi_drv_probe+0x5c/0x74)
[    3.555600] [<c03e96c8>] (spi_drv_probe) from [<c037db44>]
(driver_probe_device+0x1c8/0x26c)
[    3.564106] [<c037db44>] (driver_probe_device) from [<c037c244>]
(bus_for_each_drv+0x44/0x8c)
[    3.572684] [<c037c244>] (bus_for_each_drv) from [<c037d904>]
(__device_attach+0x88/0xd8)
[    3.580917] [<c037d904>] (__device_attach) from [<c037d0bc>]
(bus_probe_device+0x84/0x8c)
[    3.589149] [<c037d0bc>] (bus_probe_device) from [<c037b5fc>]
(device_add+0x33c/0x524)
[    3.597110] [<c037b5fc>] (device_add) from [<c03e9540>]
(spi_add_device+0x88/0x130)
[    3.604835] [<c03e9540>] (spi_add_device) from [<c03eab64>]
(of_register_spi_device+0x208/0x2f8)
[    3.613676] [<c03eab64>] (of_register_spi_device) from [<c03eb034>]
(spi_register_master+0x214/0x444)
[    3.622950] [<c03eb034>] (spi_register_master) from [<c03eb290>]
(devm_spi_register_master+0x2c/0x68)
[    3.632222] [<c03eb290>] (devm_spi_register_master) from
[<c03ebdc8>] (tegra_spi_probe+0x29c/0x350)
[    3.641322] [<c03ebdc8>] (tegra_spi_probe) from [<c037f230>]
(platform_drv_probe+0x48/0xa4)
[    3.649728] [<c037f230>] (platform_drv_probe) from [<c037db44>]
(driver_probe_device+0x1c8/0x26c)
[    3.658671] [<c037db44>] (driver_probe_device) from [<c037dc74>]
(__driver_attach+0x8c/0x90)
[    3.667135] [<c037dc74>] (__driver_attach) from [<c037c2e0>]
(bus_for_each_dev+0x54/0x88)
[    3.675382] [<c037c2e0>] (bus_for_each_dev) from [<c037d2a0>]
(bus_add_driver+0xe8/0x1f4)
[    3.683622] [<c037d2a0>] (bus_add_driver) from [<c037e6a0>]
(driver_register+0x78/0xf4)
[    3.691693] [<c037e6a0>] (driver_register) from [<c00096c4>]
(do_one_initcall+0x80/0x1d0)
[    3.699908] [<c00096c4>] (do_one_initcall) from [<c0a09dc8>]
(kernel_init_freeable+0x110/0x1dc)
[    3.708663] [<c0a09dc8>] (kernel_init_freeable) from [<c0736770>]
(kernel_init+0x8/0xec)
[    3.716795] [<c0736770>] (kernel_init) from [<c000fde8>]
(ret_from_fork+0x14/0x2c)
[    3.724439] ---[ end trace e92698c5376bfefb ]---
[    3.729108] spi-tegra114 7000da00.spi: spi trasfer timeout, err 0
[    3.735272] spi_master spi32765: failed to transfer one message from queue
[    3.742195] m25p80 spi32765.0: error -5 reading 9f
[    3.747049] m25p80: probe of spi32765.0 failed with error -5
[    3.754768] CAN device driver interface
[    3.756829] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
[    3.763827] igb: Copyright (c) 2007-2014 Intel Corporation.
[    3.769830] xen_netfront: Initialising Xen virtual ethernet driver
[    3.776009] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB
Ethernet driver
[    3.783289] usbcore: registered new interface driver pegasus
[    3.789058] usbcore: registered new interface driver asix
[    3.794455] usbcore: registered new interface driver ax88179_178a
[    3.800637] usbcore: registered new interface driver cdc_ether
[    3.806555] usbcore: registered new interface driver smsc75xx
[    3.812372] usbcore: registered new interface driver smsc95xx
[    3.818129] usbcore: registered new interface driver net1080
[    3.823837] usbcore: registered new interface driver cdc_subset
[    3.829849] usbcore: registered new interface driver zaurus
[    3.835520] usbcore: registered new interface driver cdc_ncm
[    3.841358] tegra-phy 7d004000.usb-phy: no vbus regulator
[    3.847023] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.853106] ehci-pci: EHCI PCI platform driver
[    3.857735] tegra-ehci: Tegra EHCI driver
[    3.862029] tegra-ehci 7d004000.usb: EHCI Host Controller
[    3.867164] tegra-ehci 7d004000.usb: new USB bus registered,
assigned bus number 1
[    3.875088] tegra-ehci 7d004000.usb: irq 342, io mem 0x7d004000
[    3.897244] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
[    3.903016] hub 1-0:1.0: USB hub found
[    3.905146] hub 1-0:1.0: 1 port detected
[    3.910543] usbcore: registered new interface driver cdc_acm
[    3.914781] cdc_acm: USB Abstract Control Model driver for USB
modems and ISDN adapters
[    3.923002] usbcore: registered new interface driver cdc_wdm
[    3.928802] usbcore: registered new interface driver usb-storage
[    3.935427] mousedev: PS/2 mouse device common for all mice
[    3.943355] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
[    3.948720] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
[    3.955257] i2c /dev entries driver
[    3.960738] usbcore: registered new interface driver uvcvideo
[    3.964583] USB Video Class driver (1.1.1)
[    3.968790] gspca_main: v2.14.0 registered
[    3.973727] 0-004c supply vcc not found, using dummy regulator
[    4.977235] tegra-i2c 7000c000.i2c: i2c transfer timed out
[    4.980846] lm90 0-004c: Register 0x4 read failed (-110)
[    4.986196] lm90 0-004c: Failed to read convrate register!
[    5.987234] tegra-i2c 7000c000.i2c: i2c transfer timed out
[    6.547246] cfg80211: Calling CRDA to update world regulatory domain
[    6.987237] tegra-i2c 7000c000.i2c: i2c transfer timed out
[    6.990842] lm90 0-004c: Register 0x3 read failed (-110)
[    6.996198] lm90 0-004c: Initialization failed!
[    7.002041] sdhci: Secure Digital Host Controller Interface driver
[    7.007027] sdhci: Copyright(c) Pierre Ossman
[    7.011481] sdhci-pltfm: SDHCI platform and OF driver helper
[    7.017580] sdhci-tegra 700b0400.sdhci: Got CD GPIO
[    7.022128] sdhci-tegra 700b0400.sdhci: Got WP GPIO
[    7.027105] mmc0: Unknown controller version (3). You may
experience problems.
[    7.034491] sdhci-tegra 700b0400.sdhci: No vmmc regulator found
[    7.040550] mmc0: Unknown controller version (3). You may
experience problems.
[    7.047721] sdhci-tegra 700b0600.sdhci: No vmmc regulator found
[    7.053570] sdhci-tegra 700b0600.sdhci: No vqmmc regulator found
[    7.059654] mmc0: Invalid maximum block size, assuming 512 bytes
[    7.117253] mmc0: SDHCI controller on 700b0600.sdhci
[700b0600.sdhci] using ADMA 64-bit
[    7.124468] usbcore: registered new interface driver usbhid
[    7.128999] usbhid: USB HID core driver
[    8.537237] tegra-i2c 7000c000.i2c: i2c transfer timed out
[    8.540847] rt5640 0-001c: Device with ID register c0af9d34 is not rt5640/39
[    8.551341] tegra30-i2s 70301100.i2s: DMA channels sourced from
device 70300000.ahub
[    8.557838] tegra-snd-rt5640 sound: ASoC: CODEC DAI rt5640-aif1 not
registered
[    8.564464] tegra-snd-rt5640 sound: snd_soc_register_card failed (-517)
[    8.573237] NET: Registered protocol family 10
[    8.577517] mip6: Mobile IPv6
[    8.578820] sit: IPv6 over IPv4 tunneling driver
[    8.586541] NET: Registered protocol family 17
[    8.589192] NET: Registered protocol family 15
[    8.593603] can: controller area network core (rev 20120528 abi 9)
[    8.600037] NET: Registered protocol family 29
[    8.604351] can: raw protocol (rev 20120528)
[    8.608697] can: broadcast manager protocol (rev 20120528 t)
[    8.614418] can: netlink gateway (rev 20130117) max_hops=1
[    8.620197] Bluetooth: RFCOMM socket layer initialized
[    8.625156] Bluetooth: RFCOMM ver 1.11
[    8.628991] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.634341] Bluetooth: BNEP socket layer initialized
[    8.639374] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    8.645349] Bluetooth: HIDP socket layer initialized
[    8.650678] Registering SWP/SWPB emulation handler
[    8.661218] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[    8.665886] tegra-pcie 1003000.pcie-controller: Failed to get
supply 'avddio-pex': -517
[    8.674354] +5V_SYS: supplied by +VDD_MUX
[    8.678090] +5V_HDMI_CON: supplied by +5V_SYS
[    8.682576] reg-fixed-voltage regulators:regulator@11: Failed to
resolve vin-supply for +1.05V_RUN_AVDD_HDMI_PLL
[    8.692649] tegra-hdmi 54280000.hdmi: failed to get PLL regulator
[    8.699325] tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
[    8.705454] tegra-ahci 70027000.sata: Failed to get regulators
[    8.711824] +5V_USB_HS: supplied by +5V_SYS
[    8.716182] tegra-ehci 7d008000.usb: EHCI Host Controller
[    8.721165] tegra-ehci 7d008000.usb: new USB bus registered,
assigned bus number 2
[    8.729155] tegra-ehci 7d008000.usb: irq 343, io mem 0x7d008000
[    8.747246] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
[    8.753009] hub 2-0:1.0: USB hub found
[    8.755139] hub 2-0:1.0: 1 port detected
[    8.760236] sdhci-tegra 700b0400.sdhci: Got CD GPIO
[    8.764021] sdhci-tegra 700b0400.sdhci: Got WP GPIO
[    8.769021] mmc1: Unknown controller version (3). You may
experience problems.
[    8.776370] sdhci-tegra 700b0400.sdhci: No vmmc regulator found
[    8.782726] tegra-snd-rt5640 sound: ASoC: CODEC DAI rt5640-aif1 not
registered
[    8.789521] tegra-snd-rt5640 sound: snd_soc_register_card failed (-517)
[    8.796977] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[    8.802818] tegra-pcie 1003000.pcie-controller: Failed to get
supply 'avddio-pex': -517
[    8.811291] reg-fixed-voltage regulators:regulator@11: Failed to
resolve vin-supply for +1.05V_RUN_AVDD_HDMI_PLL
[    8.821048] tegra-hdmi 54280000.hdmi: failed to get PLL regulator
[    8.827691] tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
[    8.833857] tegra-ahci 70027000.sata: Failed to get regulators
[    8.840805] input: gpio-keys as /devices/soc0/gpio-keys/input/input0
[    8.846820] hctosys: unable to open rtc device (rtc0)
[    8.847331] sdhci-tegra 700b0400.sdhci: Got CD GPIO
[    8.847369] sdhci-tegra 700b0400.sdhci: Got WP GPIO
[    8.847471] mmc1: Unknown controller version (3). You may
experience problems.
[    8.851403] sdhci-tegra 700b0400.sdhci: No vmmc regulator found
[    8.852328] tegra-snd-rt5640 sound: ASoC: CODEC DAI rt5640-aif1 not
registered
[    8.852340] tegra-snd-rt5640 sound: snd_soc_register_card failed (-517)
[    8.854009] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
[    8.854062] tegra-pcie 1003000.pcie-controller: Failed to get
supply 'avddio-pex': -517
[    8.855019] reg-fixed-voltage regulators:regulator@11: Failed to
resolve vin-supply for +1.05V_RUN_AVDD_HDMI_PLL
[    8.855030] tegra-hdmi 54280000.hdmi: failed to get PLL regulator
[    8.856050] tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
[    8.856059] tegra-ahci 70027000.sata: Failed to get regulators
[    8.951051] +12V_SATA: disabling
[    8.952391] +5V_SATA: disabling
[    8.955596] +5V_HDMI_CON: disabling
[    8.959166] +1.05V_RUN_AVDD_HDMI_PLL: disabling
[    8.963742] +USB0_VBUS_SW: disabling
[    8.967400] +3.3V_AVDD_HDMI_

Thanks and Regards,
Dushyant

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

  reply	other threads:[~2016-04-14 15:54 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-08  8:23 Dushyant K Behl
2016-03-09 13:37 ` Wei Liu
2016-03-10  5:08   ` Julien Grall
2016-03-12 14:20     ` Dushyant Behl
2016-03-12 15:27       ` Meng Xu
2016-03-12 20:23         ` Dushyant Behl
2016-03-13  2:10           ` Meng Xu
2016-03-14  9:31             ` Dushyant Behl
2016-03-14 14:12               ` Konrad Rzeszutek Wilk
2016-03-14 14:19                 ` Dushyant Behl
2016-03-17 14:52                   ` Julien Grall
2016-03-18 15:01                     ` Dushyant Behl
2016-03-18 17:23                       ` Julien Grall
2016-03-21 10:12                         ` Dushyant Behl
2016-03-24 11:05                           ` Dushyant Behl
2016-03-29 19:01                             ` Julien Grall
2016-03-29 20:56                               ` Dushyant Behl
2016-04-01 10:04                                 ` Julien Grall
2016-04-07  7:48                                   ` Dushyant Behl
2016-04-08 10:10                                     ` Julien Grall
2016-04-08 12:27                                       ` Ian Campbell
2016-04-14 15:54                                         ` Dushyant Behl [this message]
2016-05-14 18:43                                           ` Meng Xu
2016-05-14 19:03                                             ` Dushyant Behl
2016-05-14  2:09                                       ` Meng Xu
2016-05-14 17:36                                         ` Dushyant Behl
2016-05-14 18:34                                           ` Meng Xu
2016-05-14 18:37                           ` Meng Xu
2016-05-14 18:58                             ` Dushyant Behl
2016-05-12  1:00 ` Meng Xu
2016-05-12  9:19   ` Dushyant Behl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAHF350JdJDA3w4AgWk1V5TMwW2WE_wjxBrEVUmZ9sn1+X6kSvA@mail.gmail.com \
    --to=myselfdushyantbehl@gmail.com \
    --cc=dushyantbehl@in.ibm.com \
    --cc=ijc@hellion.org.uk \
    --cc=julien.grall@arm.com \
    --cc=sstabellini@kernel.org \
    --cc=stefano.stabellini@eu.citrix.com \
    --cc=wei.liu2@citrix.com \
    --cc=xen-devel@lists.xen.org \
    --cc=xumengpanda@gmail.com \
    --subject='Re: Running Xen on Nvidia Jetson-TK1' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).