* [Xen-devel] [PATCH 0/3] docs: Fix our url schemes to use https
@ 2020-03-30 13:57 Ian Jackson
2020-03-30 13:57 ` [Xen-devel] [PATCH 1/3] docs etc.: https: Fix references to wiki.xen[project.org Ian Jackson
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Ian Jackson @ 2020-03-30 13:57 UTC (permalink / raw)
To: xen-devel
Cc: Juergen Gross, Kevin Tian, Stefano Stabellini, Julien Grall,
Jun Nakajima, Wei Liu, Konrad Rzeszutek Wilk, Andrew Cooper,
Ross Lagerwall, ian.jackson, George Dunlap, Anthony PERARD,
Yang Hongyang, Jan Beulich, Shriram Rajagopalan, Samuel Thibault,
Daniel De Graaf, Roger Pau Monné
Obviously we should be publishing https: URLs instead of http: ones
where possible. I have not changed URLs referring to other projects
at this stage because that would have involved checking whether
https:// works for them.
Ian Jackson (3):
docs etc.: https: Fix references to wiki.xen[project.org
docs etc.: https: Fix references to other Xen pages
docs/README: Fix a broken url
README | 24 ++++++++++++------------
SUPPORT.md | 2 +-
config/Paths.mk.in | 2 +-
configure | 6 +++---
configure.ac | 2 +-
docs/README.colo | 2 +-
docs/README.remus | 2 +-
docs/configure | 6 +++---
docs/configure.ac | 2 +-
docs/misc/9pfs.pandoc | 4 ++--
docs/misc/livepatch.pandoc | 4 ++--
docs/misc/pvcalls.pandoc | 6 +++---
docs/misc/stubdom.txt | 2 +-
docs/misc/vtd.txt | 2 +-
docs/misc/xen-command-line.pandoc | 4 ++--
docs/misc/xenstore-paths.pandoc | 22 +++++++++++-----------
docs/misc/xenstore.txt | 2 +-
docs/misc/xsm-flask.txt | 4 ++--
docs/process/branching-checklist.txt | 2 +-
stubdom/configure | 6 +++---
stubdom/configure.ac | 2 +-
tools/configure | 6 +++---
tools/configure.ac | 2 +-
tools/libxl/libxlu_cfg.c | 2 +-
xen/arch/x86/hvm/vmx/vmx.c | 2 +-
xen/include/public/io/blkif.h | 2 +-
26 files changed, 61 insertions(+), 61 deletions(-)
--
2.11.0
Ian Jackson (3):
docs etc.: https: Fix references to wiki.xen[project.org
docs etc.: https: Fix references to other Xen pages
docs/README: Fix a broken url
README | 24 ++++++++++++------------
SUPPORT.md | 2 +-
config/Paths.mk.in | 2 +-
configure | 6 +++---
configure.ac | 2 +-
docs/README.colo | 2 +-
docs/README.remus | 2 +-
docs/configure | 6 +++---
docs/configure.ac | 2 +-
docs/misc/9pfs.pandoc | 4 ++--
docs/misc/livepatch.pandoc | 4 ++--
docs/misc/pvcalls.pandoc | 6 +++---
docs/misc/stubdom.txt | 2 +-
docs/misc/vtd.txt | 2 +-
docs/misc/xen-command-line.pandoc | 4 ++--
docs/misc/xenstore-paths.pandoc | 22 +++++++++++-----------
docs/misc/xenstore.txt | 2 +-
docs/misc/xsm-flask.txt | 4 ++--
docs/process/branching-checklist.txt | 2 +-
stubdom/configure | 6 +++---
stubdom/configure.ac | 2 +-
tools/configure | 6 +++---
tools/configure.ac | 2 +-
tools/libxl/libxlu_cfg.c | 2 +-
xen/arch/x86/hvm/vmx/vmx.c | 2 +-
xen/include/public/io/blkif.h | 2 +-
26 files changed, 61 insertions(+), 61 deletions(-)
--
2.11.0
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Xen-devel] [PATCH 1/3] docs etc.: https: Fix references to wiki.xen[project.org
2020-03-30 13:57 [Xen-devel] [PATCH 0/3] docs: Fix our url schemes to use https Ian Jackson
@ 2020-03-30 13:57 ` Ian Jackson
2020-03-30 14:06 ` Julien Grall
2020-03-30 13:57 ` [Xen-devel] [PATCH 2/3] docs etc.: https: Fix references to other Xen pages Ian Jackson
2020-03-30 13:57 ` [Xen-devel] [PATCH 3/3] docs/README: Fix a broken url Ian Jackson
2 siblings, 1 reply; 8+ messages in thread
From: Ian Jackson @ 2020-03-30 13:57 UTC (permalink / raw)
To: xen-devel
Cc: Stefano Stabellini, Julien Grall, Wei Liu, Andrew Cooper,
ian.jackson, George Dunlap, Anthony PERARD, Yang Hongyang,
Jan Beulich, Shriram Rajagopalan
Change the url scheme to https. This is all in-tree references to the
Xen wiki.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
---
README | 16 ++++++++--------
config/Paths.mk.in | 2 +-
docs/README.colo | 2 +-
docs/README.remus | 2 +-
docs/misc/stubdom.txt | 2 +-
docs/misc/vtd.txt | 2 +-
docs/misc/xen-command-line.pandoc | 2 +-
docs/misc/xenstore.txt | 2 +-
tools/libxl/libxlu_cfg.c | 2 +-
9 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/README b/README
index 92b1de9938..712d05d69d 100644
--- a/README
+++ b/README
@@ -21,15 +21,15 @@ development community, spearheaded by xen.org (http://www.xen.org).
This file contains some quick-start instructions to install Xen on
your system. For more information see http:/www.xen.org/ and
-http://wiki.xen.org/
+https://wiki.xen.org/
Quick-Start Guide
=================
First, this is just a quick-start guide. For more comprehensive
information see the INSTALL file and the Xen wiki at
-http://wiki.xenproject.org and in particular
-http://wiki.xenproject.org/wiki/Getting_Started.
+https://wiki.xenproject.org and in particular
+https://wiki.xenproject.org/wiki/Getting_Started.
Second, there are a number of prerequisites for building a Xen source
release. Make sure you have all the following installed, either by
@@ -88,10 +88,10 @@ disabled at compile time:
Second, you need to acquire a suitable kernel for use in domain 0. If
possible you should use a kernel provided by your OS distributor. If
no suitable kernel is available from your OS distributor then refer to
-http://wiki.xen.org/wiki/XenDom0Kernels for suggestions for
+https://wiki.xen.org/wiki/XenDom0Kernels for suggestions for
suitable kernels to use.
If you are looking to compile a Dom0 kernel from source, please refer to
-http://wiki.xen.org/wiki/XenParavirtOps.
+https://wiki.xen.org/wiki/XenParavirtOps.
[NB. Unless noted otherwise, all the following steps should be
performed with root privileges.]
@@ -168,9 +168,9 @@ You can change the preferred xenstored you want to use in the configuration
but since we cannot stop the daemon a reboot will be required to make the
change take effect.
-[0] http://wiki.xen.org/wiki/XenStore
-[1] http://wiki.xen.org/wiki/XenStoreReference
-[2] http://wiki.xen.org/wiki/Xenstored
+[0] https://wiki.xen.org/wiki/XenStore
+[1] https://wiki.xen.org/wiki/XenStoreReference
+[2] https://wiki.xen.org/wiki/Xenstored
Python Runtime Libraries
========================
diff --git a/config/Paths.mk.in b/config/Paths.mk.in
index dc9d0c0353..416fc7aab9 100644
--- a/config/Paths.mk.in
+++ b/config/Paths.mk.in
@@ -10,7 +10,7 @@
#
# For more documentation you can refer to the wiki:
#
-# http://wiki.xen.org/wiki/Category:Host_Configuration#System_wide_xen_configuration
+# https://wiki.xen.org/wiki/Category:Host_Configuration#System_wide_xen_configuration
PACKAGE_TARNAME := @PACKAGE_TARNAME@
prefix := @prefix@
diff --git a/docs/README.colo b/docs/README.colo
index 466eb72152..acb4ee5a0a 100644
--- a/docs/README.colo
+++ b/docs/README.colo
@@ -5,5 +5,5 @@ response in parallel too. If the response packets from PVM and SVM are
identical, they are released immediately. Otherwise, a VM checkpoint (on demand)
is conducted.
-See the website at http://wiki.xen.org/wiki/COLO_-_Coarse_Grain_Lock_Stepping
+See the website at https://wiki.xen.org/wiki/COLO_-_Coarse_Grain_Lock_Stepping
for details.
diff --git a/docs/README.remus b/docs/README.remus
index 20783c93da..e41e045a10 100644
--- a/docs/README.remus
+++ b/docs/README.remus
@@ -1,7 +1,7 @@
Remus provides fault tolerance for virtual machines by sending continuous
checkpoints to a backup, which will activate if the target VM fails.
-See the website at http://wiki.xen.org/wiki/Remus for details.
+See the website at https://wiki.xen.org/wiki/Remus for details.
Using Remus with libxl on Xen 4.5 and higher:
To enable network buffering, you need libnl 3.2.8
diff --git a/docs/misc/stubdom.txt b/docs/misc/stubdom.txt
index de7b6c7d96..882a18cab4 100644
--- a/docs/misc/stubdom.txt
+++ b/docs/misc/stubdom.txt
@@ -19,7 +19,7 @@ config:
device_model_stubdomain_override = 1
See xl.cfg(5) for more details of the xl domain configuration syntax
-and http://wiki.xen.org/wiki/Device_Model_Stub_Domains for more
+and https://wiki.xen.org/wiki/Device_Model_Stub_Domains for more
information on device model stub domains
diff --git a/docs/misc/vtd.txt b/docs/misc/vtd.txt
index 88b2102e3e..89076a0776 100644
--- a/docs/misc/vtd.txt
+++ b/docs/misc/vtd.txt
@@ -208,7 +208,7 @@ http://www.dell.com/content/products/category.aspx/optix?c=us&cs=555&l=en&s=biz
- HP Compaq: DC7800
http://h10010.www1.hp.com/wwpc/us/en/en/WF04a/12454-12454-64287-321860-3328898.html
-For more information, pls refer to http://wiki.xen.org/wiki/VTdHowTo.
+For more information, pls refer to https://wiki.xen.org/wiki/VTdHowTo.
Assigning devices to HVM domains
diff --git a/docs/misc/xen-command-line.pandoc b/docs/misc/xen-command-line.pandoc
index 02432bdb25..6ff317d15d 100644
--- a/docs/misc/xen-command-line.pandoc
+++ b/docs/misc/xen-command-line.pandoc
@@ -843,7 +843,7 @@ So `<sz>` being `1G+25%` on a 256 GB host would result in 65 GB.
If you use this option then it is highly recommended that you disable
any dom0 autoballooning feature present in your toolstack. See the
_xl.conf(5)_ man page or [Xen Best
-Practices](http://wiki.xen.org/wiki/Xen_Best_Practices#Xen_dom0_dedicated_memory_and_preventing_dom0_memory_ballooning).
+Practices](https://wiki.xen.org/wiki/Xen_Best_Practices#Xen_dom0_dedicated_memory_and_preventing_dom0_memory_ballooning).
This option doesn't have effect if pv-shim mode is enabled.
diff --git a/docs/misc/xenstore.txt b/docs/misc/xenstore.txt
index 7f2b388dd5..04ce0ba607 100644
--- a/docs/misc/xenstore.txt
+++ b/docs/misc/xenstore.txt
@@ -168,7 +168,7 @@ SET_PERMS <path>|<perm-as-string>|+?
r<domid> read only
b<domid> both read and write
n<domid> no access
- See http://wiki.xen.org/wiki/XenBus section
+ See https://wiki.xen.org/wiki/XenBus section
`Permissions' for details of the permissions system.
---------- Watches ----------
diff --git a/tools/libxl/libxlu_cfg.c b/tools/libxl/libxlu_cfg.c
index cafc632fc1..f9e8aa2f3a 100644
--- a/tools/libxl/libxlu_cfg.c
+++ b/tools/libxl/libxlu_cfg.c
@@ -74,7 +74,7 @@ static void parse(CfgParseContext *ctx) {
fputs(
"warning: Config file looks like it contains Python code.\n"
"warning: Arbitrary Python is no longer supported.\n"
- "warning: See http://wiki.xen.org/wiki/PythonInXlConfig\n",
+ "warning: See https://wiki.xen.org/wiki/PythonInXlConfig\n",
ctx->cfg->report);
}
}
--
2.11.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [Xen-devel] [PATCH 2/3] docs etc.: https: Fix references to other Xen pages
2020-03-30 13:57 [Xen-devel] [PATCH 0/3] docs: Fix our url schemes to use https Ian Jackson
2020-03-30 13:57 ` [Xen-devel] [PATCH 1/3] docs etc.: https: Fix references to wiki.xen[project.org Ian Jackson
@ 2020-03-30 13:57 ` Ian Jackson
2020-03-30 14:08 ` Julien Grall
2020-03-30 13:57 ` [Xen-devel] [PATCH 3/3] docs/README: Fix a broken url Ian Jackson
2 siblings, 1 reply; 8+ messages in thread
From: Ian Jackson @ 2020-03-30 13:57 UTC (permalink / raw)
To: xen-devel
Cc: Juergen Gross, Kevin Tian, Stefano Stabellini, Julien Grall,
Jun Nakajima, Wei Liu, Konrad Rzeszutek Wilk, Andrew Cooper,
ian.jackson, George Dunlap, Ross Lagerwall, Jan Beulich,
Samuel Thibault, Daniel De Graaf, Roger Pau Monné
Change the url scheme to https. This is all in-tree references to
xenbits and the main website except for those in Config.mk.
We leave Config.mk alone for now because those urls are used by CI
systems and we need to check that nothing breaks when we change the
download method.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
---
README | 8 ++++----
SUPPORT.md | 2 +-
configure | 6 +++---
configure.ac | 2 +-
docs/configure | 6 +++---
docs/configure.ac | 2 +-
docs/misc/9pfs.pandoc | 4 ++--
docs/misc/livepatch.pandoc | 4 ++--
docs/misc/pvcalls.pandoc | 6 +++---
docs/misc/xen-command-line.pandoc | 2 +-
docs/misc/xenstore-paths.pandoc | 22 +++++++++++-----------
docs/misc/xsm-flask.txt | 4 ++--
docs/process/branching-checklist.txt | 2 +-
stubdom/configure | 6 +++---
stubdom/configure.ac | 2 +-
tools/configure | 6 +++---
tools/configure.ac | 2 +-
xen/arch/x86/hvm/vmx/vmx.c | 2 +-
xen/include/public/io/blkif.h | 2 +-
19 files changed, 45 insertions(+), 45 deletions(-)
diff --git a/README b/README
index 712d05d69d..555f3415fa 100644
--- a/README
+++ b/README
@@ -7,7 +7,7 @@
#################################
-http://www.xen.org/
+https://www.xen.org/
What is Xen?
============
@@ -17,10 +17,10 @@ Systems Research Group of the University of Cambridge Computer
Laboratory, as part of the UK-EPSRC funded XenoServers project. Xen
is freely-distributable Open Source software, released under the GNU
GPL. Since its initial public release, Xen has grown a large
-development community, spearheaded by xen.org (http://www.xen.org).
+development community, spearheaded by xen.org (https://www.xen.org).
This file contains some quick-start instructions to install Xen on
-your system. For more information see http:/www.xen.org/ and
+your system. For more information see https:/www.xen.org/ and
https://wiki.xen.org/
Quick-Start Guide
@@ -99,7 +99,7 @@ performed with root privileges.]
1. Download and untar the source tarball file. This will be a
file named xen-unstable-src.tgz, or xen-$version-src.tgz.
You can also pull the current version from the git or mercurial
- repositories at http://xenbits.xen.org/
+ repositories at https://xenbits.xen.org/
# tar xzf xen-unstable-src.tgz
diff --git a/SUPPORT.md b/SUPPORT.md
index 169b6f8fcf..7270c9b021 100644
--- a/SUPPORT.md
+++ b/SUPPORT.md
@@ -627,7 +627,7 @@ Virtual Performance Management Unit for HVM guests
Status, x86: Supported, Not security supported
Disabled by default (enable with hypervisor command line option).
-This feature is not security supported: see http://xenbits.xen.org/xsa/advisory-163.html
+This feature is not security supported: see https://xenbits.xen.org/xsa/advisory-163.html
### Argo: Inter-domain message delivery by hypercall
diff --git a/configure b/configure
index 83f84b049f..9da3970cef 100755
--- a/configure
+++ b/configure
@@ -582,7 +582,7 @@ PACKAGE_TARNAME='xen'
PACKAGE_VERSION='4.14'
PACKAGE_STRING='Xen Hypervisor 4.14'
PACKAGE_BUGREPORT='xen-devel@lists.xen.org'
-PACKAGE_URL='http://www.xen.org/'
+PACKAGE_URL='https://www.xen.org/'
ac_unique_file="./xen/common/kernel.c"
enable_option_checking=no
@@ -1336,7 +1336,7 @@ Optional Packages:
[PREFIX/lib/debug]
Report bugs to <xen-devel@lists.xen.org>.
-Xen Hypervisor home page: <http://www.xen.org/>.
+Xen Hypervisor home page: <https://www.xen.org/>.
_ACEOF
ac_status=$?
fi
@@ -2904,7 +2904,7 @@ Configuration files:
$config_files
Report bugs to <xen-devel@lists.xen.org>.
-Xen Hypervisor home page: <http://www.xen.org/>."
+Xen Hypervisor home page: <https://www.xen.org/>."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
diff --git a/configure.ac b/configure.ac
index 7388b282f9..3aea407153 100644
--- a/configure.ac
+++ b/configure.ac
@@ -3,7 +3,7 @@
AC_PREREQ([2.67])
AC_INIT([Xen Hypervisor], m4_esyscmd([./version.sh ./xen/Makefile]),
- [xen-devel@lists.xen.org], [xen], [http://www.xen.org/])
+ [xen-devel@lists.xen.org], [xen], [https://www.xen.org/])
AC_CONFIG_SRCDIR([./xen/common/kernel.c])
AC_CONFIG_FILES([
config/Toplevel.mk
diff --git a/docs/configure b/docs/configure
index fdfc110311..9e3ed60462 100755
--- a/docs/configure
+++ b/docs/configure
@@ -582,7 +582,7 @@ PACKAGE_TARNAME='xen'
PACKAGE_VERSION='4.14'
PACKAGE_STRING='Xen Hypervisor Documentation 4.14'
PACKAGE_BUGREPORT='xen-devel@lists.xen.org'
-PACKAGE_URL='http://www.xen.org/'
+PACKAGE_URL='https://www.xen.org/'
ac_unique_file="misc/xen-command-line.pandoc"
ac_subst_vars='LTLIBOBJS
@@ -1320,7 +1320,7 @@ Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
Report bugs to <xen-devel@lists.xen.org>.
-Xen Hypervisor Documentation home page: <http://www.xen.org/>.
+Xen Hypervisor Documentation home page: <https://www.xen.org/>.
_ACEOF
ac_status=$?
fi
@@ -2857,7 +2857,7 @@ Configuration files:
$config_files
Report bugs to <xen-devel@lists.xen.org>.
-Xen Hypervisor Documentation home page: <http://www.xen.org/>."
+Xen Hypervisor Documentation home page: <https://www.xen.org/>."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
diff --git a/docs/configure.ac b/docs/configure.ac
index e795bec04c..cb5a6eaa4c 100644
--- a/docs/configure.ac
+++ b/docs/configure.ac
@@ -3,7 +3,7 @@
AC_PREREQ([2.67])
AC_INIT([Xen Hypervisor Documentation], m4_esyscmd([../version.sh ../xen/Makefile]),
- [xen-devel@lists.xen.org], [xen], [http://www.xen.org/])
+ [xen-devel@lists.xen.org], [xen], [https://www.xen.org/])
AC_CONFIG_SRCDIR([misc/xen-command-line.pandoc])
AC_CONFIG_FILES([
../config/Docs.mk
diff --git a/docs/misc/9pfs.pandoc b/docs/misc/9pfs.pandoc
index a4dc86f639..b034fb5fa6 100644
--- a/docs/misc/9pfs.pandoc
+++ b/docs/misc/9pfs.pandoc
@@ -415,5 +415,5 @@ the *size* field of the 9pfs header.
[paper]: https://www.usenix.org/legacy/event/usenix05/tech/freenix/full_papers/hensbergen/hensbergen.pdf
[website]: https://github.com/chaos/diod/blob/master/protocol.md
-[XenbusStateInitialising]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xenbus.h.html
-[ring.h]: http://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=xen/include/public/io/ring.h;hb=HEAD
+[XenbusStateInitialising]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xenbus.h.html
+[ring.h]: https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=xen/include/public/io/ring.h;hb=HEAD
diff --git a/docs/misc/livepatch.pandoc b/docs/misc/livepatch.pandoc
index 9473ad5991..d38e4ce074 100644
--- a/docs/misc/livepatch.pandoc
+++ b/docs/misc/livepatch.pandoc
@@ -88,7 +88,7 @@ mechanism. See `Trampoline (e9 opcode)` section for more details.
### Example of trampoline and in-place splicing
As example we will assume the hypervisor does not have XSA-132 (see
-[domctl/sysctl: don't leak hypervisor stack to toolstacks](http://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=4ff3449f0e9d175ceb9551d3f2aecb59273f639d))
+[domctl/sysctl: don't leak hypervisor stack to toolstacks](https://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=4ff3449f0e9d175ceb9551d3f2aecb59273f639d))
and we would like to binary patch the hypervisor with it. The original code
looks as so:
@@ -157,7 +157,7 @@ CPU branching logic (I-cache, but it is just one unconditional jump).
For this example we will assume that the hypervisor has not been compiled with
XSA-125 (see
-[pre-fill structures for certain HYPERVISOR_xen_version sub-ops](http://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=fe2e079f642effb3d24a6e1a7096ef26e691d93e))
+[pre-fill structures for certain HYPERVISOR_xen_version sub-ops](https://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=fe2e079f642effb3d24a6e1a7096ef26e691d93e))
which mem-sets an structure in `xen_version` hypercall. This function is not
called **anywhere** in the hypervisor (it is called by the guest) but
referenced in the `compat_hypercall_table` and `hypercall_table` (and
diff --git a/docs/misc/pvcalls.pandoc b/docs/misc/pvcalls.pandoc
index 729cf97bdf..665dad556c 100644
--- a/docs/misc/pvcalls.pandoc
+++ b/docs/misc/pvcalls.pandoc
@@ -1078,8 +1078,8 @@ only as many bytes as available in the buffer up to *[in|out]_prod*.
reading from the socket.
-[xenstore]: http://xenbits.xen.org/docs/unstable/misc/xenstore.txt
-[XenbusStateInitialising]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xenbus.h.html
+[xenstore]: https://xenbits.xen.org/docs/unstable/misc/xenstore.txt
+[XenbusStateInitialising]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xenbus.h.html
[address]: http://pubs.opengroup.org/onlinepubs/7908799/xns/syssocket.h.html
[in]: http://pubs.opengroup.org/onlinepubs/000095399/basedefs/netinet/in.h.html
[socket]: http://pubs.opengroup.org/onlinepubs/009695399/functions/socket.html
@@ -1089,4 +1089,4 @@ reading from the socket.
[listen]: http://pubs.opengroup.org/onlinepubs/7908799/xns/listen.html
[accept]: http://pubs.opengroup.org/onlinepubs/7908799/xns/accept.html
[poll]: http://pubs.opengroup.org/onlinepubs/7908799/xsh/poll.html
-[ring.h]: http://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=xen/include/public/io/ring.h;hb=HEAD
+[ring.h]: https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=xen/include/public/io/ring.h;hb=HEAD
diff --git a/docs/misc/xen-command-line.pandoc b/docs/misc/xen-command-line.pandoc
index 6ff317d15d..acd0b3d994 100644
--- a/docs/misc/xen-command-line.pandoc
+++ b/docs/misc/xen-command-line.pandoc
@@ -2294,7 +2294,7 @@ provide access to a wealth of low level processor information.
*Warning:*
As the virtualisation is not 100% safe, don't use the vpmu flag on
-production systems (see http://xenbits.xen.org/xsa/advisory-163.html)!
+production systems (see https://xenbits.xen.org/xsa/advisory-163.html)!
### vwfi (arm)
> `= trap | native`
diff --git a/docs/misc/xenstore-paths.pandoc b/docs/misc/xenstore-paths.pandoc
index ff3ca04069..a152f5ea68 100644
--- a/docs/misc/xenstore-paths.pandoc
+++ b/docs/misc/xenstore-paths.pandoc
@@ -636,14 +636,14 @@ for the toolstack to obtain e.g. the domain id of a xenstore domain.
Domain Id of the xenstore domain in case xenstore is provided via a
domain instead of a daemon in dom0.
-[BLKIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,blkif.h.html
-[FBIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,fbif.h.html
-[HVMPARAMS]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,hvm,params.h.html
-[KBDIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,kbdif.h.html
-[LIBXLMEM]: http://xenbits.xen.org/docs/unstable/misc/libxl_memory.txt
-[NETIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,netif.h.html
-[SCSIIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,vscsiif.h.html
-[SI]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,xen.h.html#Struct_start_info
-[USBIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,usbif.h.html
-[VCPU]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,vcpu.h.html
-[XSWIRE]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xs_wire.h.html
+[BLKIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,blkif.h.html
+[FBIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,fbif.h.html
+[HVMPARAMS]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,hvm,params.h.html
+[KBDIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,kbdif.h.html
+[LIBXLMEM]: https://xenbits.xen.org/docs/unstable/misc/libxl_memory.txt
+[NETIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,netif.h.html
+[SCSIIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,vscsiif.h.html
+[SI]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,xen.h.html#Struct_start_info
+[USBIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,usbif.h.html
+[VCPU]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,vcpu.h.html
+[XSWIRE]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xs_wire.h.html
diff --git a/docs/misc/xsm-flask.txt b/docs/misc/xsm-flask.txt
index 40e5fc845e..2419c5cf29 100644
--- a/docs/misc/xsm-flask.txt
+++ b/docs/misc/xsm-flask.txt
@@ -49,13 +49,13 @@ driver domains, or stub xenstored - even if those bugs do no worse
than reduce the security of such a system to one whose device models,
backend drivers, or xenstore, run in dom0.
-For more information see http://xenbits.xen.org/xsa/advisory-77.html.
+For more information see https://xenbits.xen.org/xsa/advisory-77.html.
The following interfaces are covered by this statement. Interfaces
not listed here are considered safe for disaggregation, security
issues found in interfaces not listed here will be handled according
to the normal security problem response policy
-http://www.xenproject.org/security-policy.html.
+https://www.xenproject.org/security-policy.html.
__HYPERVISOR_domctl (xen/include/public/domctl.h)
diff --git a/docs/process/branching-checklist.txt b/docs/process/branching-checklist.txt
index 1dfa1a2ec7..e286e65962 100644
--- a/docs/process/branching-checklist.txt
+++ b/docs/process/branching-checklist.txt
@@ -25,7 +25,7 @@ ov=4.0
# update xendocs@xenbits docs generator to generate new stable branch
# docs too. commit to git.
-* make 13:37 <ijc> http://xenbits.xen.org/docs/4.2-testing/ is now live true
+* make 13:37 <ijc> https://xenbits.xen.org/docs/4.2-testing/ is now live true
#14:17 <ijc> HOWTO: login to xenbits. become "xendocs" . cd cronjobs . edit
# xenbits-docs-all.sh in the obvious way. git commit
ssh root@xenbits.xen.org
diff --git a/stubdom/configure b/stubdom/configure
index 8f0bdcf191..da03da535a 100755
--- a/stubdom/configure
+++ b/stubdom/configure
@@ -582,7 +582,7 @@ PACKAGE_TARNAME='xen'
PACKAGE_VERSION='4.14'
PACKAGE_STRING='Xen Hypervisor Stub Domains 4.14'
PACKAGE_BUGREPORT='xen-devel@lists.xen.org'
-PACKAGE_URL='http://www.xen.org/'
+PACKAGE_URL='https://www.xen.org/'
ac_unique_file="xenstore-minios.cfg"
ac_subst_vars='LTLIBOBJS
@@ -1376,7 +1376,7 @@ Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
Report bugs to <xen-devel@lists.xen.org>.
-Xen Hypervisor Stub Domains home page: <http://www.xen.org/>.
+Xen Hypervisor Stub Domains home page: <https://www.xen.org/>.
_ACEOF
ac_status=$?
fi
@@ -4296,7 +4296,7 @@ Configuration files:
$config_files
Report bugs to <xen-devel@lists.xen.org>.
-Xen Hypervisor Stub Domains home page: <http://www.xen.org/>."
+Xen Hypervisor Stub Domains home page: <https://www.xen.org/>."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
diff --git a/stubdom/configure.ac b/stubdom/configure.ac
index 9066dfaaa7..a2d514c021 100644
--- a/stubdom/configure.ac
+++ b/stubdom/configure.ac
@@ -3,7 +3,7 @@
AC_PREREQ([2.67])
AC_INIT([Xen Hypervisor Stub Domains], m4_esyscmd([../version.sh ../xen/Makefile]),
- [xen-devel@lists.xen.org], [xen], [http://www.xen.org/])
+ [xen-devel@lists.xen.org], [xen], [https://www.xen.org/])
AC_CONFIG_SRCDIR([xenstore-minios.cfg])
AC_CONFIG_FILES([../config/Stubdom.mk])
AC_CONFIG_AUX_DIR([../])
diff --git a/tools/configure b/tools/configure
index 13ee7f135c..4fa5f7b937 100755
--- a/tools/configure
+++ b/tools/configure
@@ -583,7 +583,7 @@ PACKAGE_TARNAME='xen'
PACKAGE_VERSION='4.14'
PACKAGE_STRING='Xen Hypervisor Tools 4.14'
PACKAGE_BUGREPORT='xen-devel@lists.xen.org'
-PACKAGE_URL='http://www.xen.org/'
+PACKAGE_URL='https://www.xen.org/'
ac_unique_file="libxl/libxl.c"
# Factoring default headers for most tests.
@@ -1611,7 +1611,7 @@ Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
Report bugs to <xen-devel@lists.xen.org>.
-Xen Hypervisor Tools home page: <http://www.xen.org/>.
+Xen Hypervisor Tools home page: <https://www.xen.org/>.
_ACEOF
ac_status=$?
fi
@@ -10373,7 +10373,7 @@ Configuration headers:
$config_headers
Report bugs to <xen-devel@lists.xen.org>.
-Xen Hypervisor Tools home page: <http://www.xen.org/>."
+Xen Hypervisor Tools home page: <https://www.xen.org/>."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
diff --git a/tools/configure.ac b/tools/configure.ac
index f288d2cc3f..ea0272766f 100644
--- a/tools/configure.ac
+++ b/tools/configure.ac
@@ -3,7 +3,7 @@
AC_PREREQ([2.67])
AC_INIT([Xen Hypervisor Tools], m4_esyscmd([../version.sh ../xen/Makefile]),
- [xen-devel@lists.xen.org], [xen], [http://www.xen.org/])
+ [xen-devel@lists.xen.org], [xen], [https://www.xen.org/])
AC_CONFIG_SRCDIR([libxl/libxl.c])
AC_CONFIG_FILES([
../config/Tools.mk
diff --git a/xen/arch/x86/hvm/vmx/vmx.c b/xen/arch/x86/hvm/vmx/vmx.c
index d265ed46ad..1c398fdb6e 100644
--- a/xen/arch/x86/hvm/vmx/vmx.c
+++ b/xen/arch/x86/hvm/vmx/vmx.c
@@ -2490,7 +2490,7 @@ const struct hvm_function_table * __init start_vmx(void)
/*
* Do not enable EPT when (!cpu_has_vmx_pat), to prevent security hole
- * (refer to http://xenbits.xen.org/xsa/advisory-60.html).
+ * (refer to https://xenbits.xen.org/xsa/advisory-60.html).
*/
if ( cpu_has_vmx_ept && (cpu_has_vmx_pat || opt_force_ept) )
{
diff --git a/xen/include/public/io/blkif.h b/xen/include/public/io/blkif.h
index d4a34de94c..4cdba79aba 100644
--- a/xen/include/public/io/blkif.h
+++ b/xen/include/public/io/blkif.h
@@ -118,7 +118,7 @@
*
* The underlying storage is not affected by the direct IO memory
* lifetime bug. See:
- * http://lists.xen.org/archives/html/xen-devel/2012-12/msg01154.html
+ * https://lists.xen.org/archives/html/xen-devel/2012-12/msg01154.html
*
* Therefore this option gives the backend permission to use
* O_DIRECT, notwithstanding that bug.
--
2.11.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [Xen-devel] [PATCH 3/3] docs/README: Fix a broken url
2020-03-30 13:57 [Xen-devel] [PATCH 0/3] docs: Fix our url schemes to use https Ian Jackson
2020-03-30 13:57 ` [Xen-devel] [PATCH 1/3] docs etc.: https: Fix references to wiki.xen[project.org Ian Jackson
2020-03-30 13:57 ` [Xen-devel] [PATCH 2/3] docs etc.: https: Fix references to other Xen pages Ian Jackson
@ 2020-03-30 13:57 ` Ian Jackson
2020-03-30 14:07 ` Julien Grall
2 siblings, 1 reply; 8+ messages in thread
From: Ian Jackson @ 2020-03-30 13:57 UTC (permalink / raw)
To: xen-devel
Cc: Stefano Stabellini, Julien Grall, Wei Liu, Andrew Cooper,
ian.jackson, George Dunlap, Jan Beulich
There was a / missing here.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
---
README | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/README b/README
index 555f3415fa..d0c87a78f0 100644
--- a/README
+++ b/README
@@ -20,7 +20,7 @@ GPL. Since its initial public release, Xen has grown a large
development community, spearheaded by xen.org (https://www.xen.org).
This file contains some quick-start instructions to install Xen on
-your system. For more information see https:/www.xen.org/ and
+your system. For more information see https://www.xen.org/ and
https://wiki.xen.org/
Quick-Start Guide
--
2.11.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [Xen-devel] [PATCH 1/3] docs etc.: https: Fix references to wiki.xen[project.org
2020-03-30 13:57 ` [Xen-devel] [PATCH 1/3] docs etc.: https: Fix references to wiki.xen[project.org Ian Jackson
@ 2020-03-30 14:06 ` Julien Grall
2020-03-30 14:13 ` Ian Jackson
0 siblings, 1 reply; 8+ messages in thread
From: Julien Grall @ 2020-03-30 14:06 UTC (permalink / raw)
To: Ian Jackson, xen-devel
Cc: Stefano Stabellini, Wei Liu, Andrew Cooper, George Dunlap,
Anthony PERARD, Yang Hongyang, Jan Beulich, Shriram Rajagopalan
Hi Ian,
Title: Did you intend to use {,project} rather than [project?
Cheers,
On 30/03/2020 14:57, Ian Jackson wrote:
> Change the url scheme to https. This is all in-tree references to the
> Xen wiki.
>
> Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
> ---
> README | 16 ++++++++--------
> config/Paths.mk.in | 2 +-
> docs/README.colo | 2 +-
> docs/README.remus | 2 +-
> docs/misc/stubdom.txt | 2 +-
> docs/misc/vtd.txt | 2 +-
> docs/misc/xen-command-line.pandoc | 2 +-
> docs/misc/xenstore.txt | 2 +-
> tools/libxl/libxlu_cfg.c | 2 +-
> 9 files changed, 16 insertions(+), 16 deletions(-)
>
> diff --git a/README b/README
> index 92b1de9938..712d05d69d 100644
> --- a/README
> +++ b/README
> @@ -21,15 +21,15 @@ development community, spearheaded by xen.org (http://www.xen.org).
>
> This file contains some quick-start instructions to install Xen on
> your system. For more information see http:/www.xen.org/ and
> -http://wiki.xen.org/
> +https://wiki.xen.org/
>
> Quick-Start Guide
> =================
>
> First, this is just a quick-start guide. For more comprehensive
> information see the INSTALL file and the Xen wiki at
> -http://wiki.xenproject.org and in particular
> -http://wiki.xenproject.org/wiki/Getting_Started.
> +https://wiki.xenproject.org and in particular
> +https://wiki.xenproject.org/wiki/Getting_Started.
>
> Second, there are a number of prerequisites for building a Xen source
> release. Make sure you have all the following installed, either by
> @@ -88,10 +88,10 @@ disabled at compile time:
> Second, you need to acquire a suitable kernel for use in domain 0. If
> possible you should use a kernel provided by your OS distributor. If
> no suitable kernel is available from your OS distributor then refer to
> -http://wiki.xen.org/wiki/XenDom0Kernels for suggestions for
> +https://wiki.xen.org/wiki/XenDom0Kernels for suggestions for
> suitable kernels to use.
> If you are looking to compile a Dom0 kernel from source, please refer to
> -http://wiki.xen.org/wiki/XenParavirtOps.
> +https://wiki.xen.org/wiki/XenParavirtOps.
>
> [NB. Unless noted otherwise, all the following steps should be
> performed with root privileges.]
> @@ -168,9 +168,9 @@ You can change the preferred xenstored you want to use in the configuration
> but since we cannot stop the daemon a reboot will be required to make the
> change take effect.
>
> -[0] http://wiki.xen.org/wiki/XenStore
> -[1] http://wiki.xen.org/wiki/XenStoreReference
> -[2] http://wiki.xen.org/wiki/Xenstored
> +[0] https://wiki.xen.org/wiki/XenStore
> +[1] https://wiki.xen.org/wiki/XenStoreReference
> +[2] https://wiki.xen.org/wiki/Xenstored
>
> Python Runtime Libraries
> ========================
> diff --git a/config/Paths.mk.in b/config/Paths.mk.in
> index dc9d0c0353..416fc7aab9 100644
> --- a/config/Paths.mk.in
> +++ b/config/Paths.mk.in
> @@ -10,7 +10,7 @@
> #
> # For more documentation you can refer to the wiki:
> #
> -# http://wiki.xen.org/wiki/Category:Host_Configuration#System_wide_xen_configuration
> +# https://wiki.xen.org/wiki/Category:Host_Configuration#System_wide_xen_configuration
>
> PACKAGE_TARNAME := @PACKAGE_TARNAME@
> prefix := @prefix@
> diff --git a/docs/README.colo b/docs/README.colo
> index 466eb72152..acb4ee5a0a 100644
> --- a/docs/README.colo
> +++ b/docs/README.colo
> @@ -5,5 +5,5 @@ response in parallel too. If the response packets from PVM and SVM are
> identical, they are released immediately. Otherwise, a VM checkpoint (on demand)
> is conducted.
>
> -See the website at http://wiki.xen.org/wiki/COLO_-_Coarse_Grain_Lock_Stepping
> +See the website at https://wiki.xen.org/wiki/COLO_-_Coarse_Grain_Lock_Stepping
> for details.
> diff --git a/docs/README.remus b/docs/README.remus
> index 20783c93da..e41e045a10 100644
> --- a/docs/README.remus
> +++ b/docs/README.remus
> @@ -1,7 +1,7 @@
> Remus provides fault tolerance for virtual machines by sending continuous
> checkpoints to a backup, which will activate if the target VM fails.
>
> -See the website at http://wiki.xen.org/wiki/Remus for details.
> +See the website at https://wiki.xen.org/wiki/Remus for details.
>
> Using Remus with libxl on Xen 4.5 and higher:
> To enable network buffering, you need libnl 3.2.8
> diff --git a/docs/misc/stubdom.txt b/docs/misc/stubdom.txt
> index de7b6c7d96..882a18cab4 100644
> --- a/docs/misc/stubdom.txt
> +++ b/docs/misc/stubdom.txt
> @@ -19,7 +19,7 @@ config:
> device_model_stubdomain_override = 1
>
> See xl.cfg(5) for more details of the xl domain configuration syntax
> -and http://wiki.xen.org/wiki/Device_Model_Stub_Domains for more
> +and https://wiki.xen.org/wiki/Device_Model_Stub_Domains for more
> information on device model stub domains
>
>
> diff --git a/docs/misc/vtd.txt b/docs/misc/vtd.txt
> index 88b2102e3e..89076a0776 100644
> --- a/docs/misc/vtd.txt
> +++ b/docs/misc/vtd.txt
> @@ -208,7 +208,7 @@ http://www.dell.com/content/products/category.aspx/optix?c=us&cs=555&l=en&s=biz
> - HP Compaq: DC7800
> http://h10010.www1.hp.com/wwpc/us/en/en/WF04a/12454-12454-64287-321860-3328898.html
>
> -For more information, pls refer to http://wiki.xen.org/wiki/VTdHowTo.
> +For more information, pls refer to https://wiki.xen.org/wiki/VTdHowTo.
>
>
> Assigning devices to HVM domains
> diff --git a/docs/misc/xen-command-line.pandoc b/docs/misc/xen-command-line.pandoc
> index 02432bdb25..6ff317d15d 100644
> --- a/docs/misc/xen-command-line.pandoc
> +++ b/docs/misc/xen-command-line.pandoc
> @@ -843,7 +843,7 @@ So `<sz>` being `1G+25%` on a 256 GB host would result in 65 GB.
> If you use this option then it is highly recommended that you disable
> any dom0 autoballooning feature present in your toolstack. See the
> _xl.conf(5)_ man page or [Xen Best
> -Practices](http://wiki.xen.org/wiki/Xen_Best_Practices#Xen_dom0_dedicated_memory_and_preventing_dom0_memory_ballooning).
> +Practices](https://wiki.xen.org/wiki/Xen_Best_Practices#Xen_dom0_dedicated_memory_and_preventing_dom0_memory_ballooning).
>
> This option doesn't have effect if pv-shim mode is enabled.
>
> diff --git a/docs/misc/xenstore.txt b/docs/misc/xenstore.txt
> index 7f2b388dd5..04ce0ba607 100644
> --- a/docs/misc/xenstore.txt
> +++ b/docs/misc/xenstore.txt
> @@ -168,7 +168,7 @@ SET_PERMS <path>|<perm-as-string>|+?
> r<domid> read only
> b<domid> both read and write
> n<domid> no access
> - See http://wiki.xen.org/wiki/XenBus section
> + See https://wiki.xen.org/wiki/XenBus section
> `Permissions' for details of the permissions system.
>
> ---------- Watches ----------
> diff --git a/tools/libxl/libxlu_cfg.c b/tools/libxl/libxlu_cfg.c
> index cafc632fc1..f9e8aa2f3a 100644
> --- a/tools/libxl/libxlu_cfg.c
> +++ b/tools/libxl/libxlu_cfg.c
> @@ -74,7 +74,7 @@ static void parse(CfgParseContext *ctx) {
> fputs(
> "warning: Config file looks like it contains Python code.\n"
> "warning: Arbitrary Python is no longer supported.\n"
> - "warning: See http://wiki.xen.org/wiki/PythonInXlConfig\n",
> + "warning: See https://wiki.xen.org/wiki/PythonInXlConfig\n",
> ctx->cfg->report);
> }
> }
>
--
Julien Grall
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Xen-devel] [PATCH 3/3] docs/README: Fix a broken url
2020-03-30 13:57 ` [Xen-devel] [PATCH 3/3] docs/README: Fix a broken url Ian Jackson
@ 2020-03-30 14:07 ` Julien Grall
0 siblings, 0 replies; 8+ messages in thread
From: Julien Grall @ 2020-03-30 14:07 UTC (permalink / raw)
To: Ian Jackson, xen-devel
Cc: Andrew Cooper, Wei Liu, Stefano Stabellini, George Dunlap, Jan Beulich
Hi Ian,
On 30/03/2020 14:57, Ian Jackson wrote:
> There was a / missing here.
>
> Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Cheers,
> ---
> README | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/README b/README
> index 555f3415fa..d0c87a78f0 100644
> --- a/README
> +++ b/README
> @@ -20,7 +20,7 @@ GPL. Since its initial public release, Xen has grown a large
> development community, spearheaded by xen.org (https://www.xen.org).
>
> This file contains some quick-start instructions to install Xen on
> -your system. For more information see https:/www.xen.org/ and
> +your system. For more information see https://www.xen.org/ and
> https://wiki.xen.org/
>
> Quick-Start Guide
>
--
Julien Grall
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Xen-devel] [PATCH 2/3] docs etc.: https: Fix references to other Xen pages
2020-03-30 13:57 ` [Xen-devel] [PATCH 2/3] docs etc.: https: Fix references to other Xen pages Ian Jackson
@ 2020-03-30 14:08 ` Julien Grall
0 siblings, 0 replies; 8+ messages in thread
From: Julien Grall @ 2020-03-30 14:08 UTC (permalink / raw)
To: Ian Jackson, xen-devel
Cc: Juergen Gross, Kevin Tian, Stefano Stabellini, Jun Nakajima,
Wei Liu, Konrad Rzeszutek Wilk, Andrew Cooper, George Dunlap,
Ross Lagerwall, Jan Beulich, Samuel Thibault, Daniel De Graaf,
Roger Pau Monné
Hi Ian,
On 30/03/2020 14:57, Ian Jackson wrote:
> Change the url scheme to https. This is all in-tree references to
> xenbits and the main website except for those in Config.mk.
>
> We leave Config.mk alone for now because those urls are used by CI
> systems and we need to check that nothing breaks when we change the
> download method.
>
> Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Cheers,
> ---
> README | 8 ++++----
> SUPPORT.md | 2 +-
> configure | 6 +++---
> configure.ac | 2 +-
> docs/configure | 6 +++---
> docs/configure.ac | 2 +-
> docs/misc/9pfs.pandoc | 4 ++--
> docs/misc/livepatch.pandoc | 4 ++--
> docs/misc/pvcalls.pandoc | 6 +++---
> docs/misc/xen-command-line.pandoc | 2 +-
> docs/misc/xenstore-paths.pandoc | 22 +++++++++++-----------
> docs/misc/xsm-flask.txt | 4 ++--
> docs/process/branching-checklist.txt | 2 +-
> stubdom/configure | 6 +++---
> stubdom/configure.ac | 2 +-
> tools/configure | 6 +++---
> tools/configure.ac | 2 +-
> xen/arch/x86/hvm/vmx/vmx.c | 2 +-
> xen/include/public/io/blkif.h | 2 +-
> 19 files changed, 45 insertions(+), 45 deletions(-)
>
> diff --git a/README b/README
> index 712d05d69d..555f3415fa 100644
> --- a/README
> +++ b/README
> @@ -7,7 +7,7 @@
>
> #################################
>
> -http://www.xen.org/
> +https://www.xen.org/
>
> What is Xen?
> ============
> @@ -17,10 +17,10 @@ Systems Research Group of the University of Cambridge Computer
> Laboratory, as part of the UK-EPSRC funded XenoServers project. Xen
> is freely-distributable Open Source software, released under the GNU
> GPL. Since its initial public release, Xen has grown a large
> -development community, spearheaded by xen.org (http://www.xen.org).
> +development community, spearheaded by xen.org (https://www.xen.org).
>
> This file contains some quick-start instructions to install Xen on
> -your system. For more information see http:/www.xen.org/ and
> +your system. For more information see https:/www.xen.org/ and
> https://wiki.xen.org/
>
> Quick-Start Guide
> @@ -99,7 +99,7 @@ performed with root privileges.]
> 1. Download and untar the source tarball file. This will be a
> file named xen-unstable-src.tgz, or xen-$version-src.tgz.
> You can also pull the current version from the git or mercurial
> - repositories at http://xenbits.xen.org/
> + repositories at https://xenbits.xen.org/
>
> # tar xzf xen-unstable-src.tgz
>
> diff --git a/SUPPORT.md b/SUPPORT.md
> index 169b6f8fcf..7270c9b021 100644
> --- a/SUPPORT.md
> +++ b/SUPPORT.md
> @@ -627,7 +627,7 @@ Virtual Performance Management Unit for HVM guests
> Status, x86: Supported, Not security supported
>
> Disabled by default (enable with hypervisor command line option).
> -This feature is not security supported: see http://xenbits.xen.org/xsa/advisory-163.html
> +This feature is not security supported: see https://xenbits.xen.org/xsa/advisory-163.html
>
> ### Argo: Inter-domain message delivery by hypercall
>
> diff --git a/configure b/configure
> index 83f84b049f..9da3970cef 100755
> --- a/configure
> +++ b/configure
> @@ -582,7 +582,7 @@ PACKAGE_TARNAME='xen'
> PACKAGE_VERSION='4.14'
> PACKAGE_STRING='Xen Hypervisor 4.14'
> PACKAGE_BUGREPORT='xen-devel@lists.xen.org'
> -PACKAGE_URL='http://www.xen.org/'
> +PACKAGE_URL='https://www.xen.org/'
>
> ac_unique_file="./xen/common/kernel.c"
> enable_option_checking=no
> @@ -1336,7 +1336,7 @@ Optional Packages:
> [PREFIX/lib/debug]
>
> Report bugs to <xen-devel@lists.xen.org>.
> -Xen Hypervisor home page: <http://www.xen.org/>.
> +Xen Hypervisor home page: <https://www.xen.org/>.
> _ACEOF
> ac_status=$?
> fi
> @@ -2904,7 +2904,7 @@ Configuration files:
> $config_files
>
> Report bugs to <xen-devel@lists.xen.org>.
> -Xen Hypervisor home page: <http://www.xen.org/>."
> +Xen Hypervisor home page: <https://www.xen.org/>."
>
> _ACEOF
> cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
> diff --git a/configure.ac b/configure.ac
> index 7388b282f9..3aea407153 100644
> --- a/configure.ac
> +++ b/configure.ac
> @@ -3,7 +3,7 @@
>
> AC_PREREQ([2.67])
> AC_INIT([Xen Hypervisor], m4_esyscmd([./version.sh ./xen/Makefile]),
> - [xen-devel@lists.xen.org], [xen], [http://www.xen.org/])
> + [xen-devel@lists.xen.org], [xen], [https://www.xen.org/])
> AC_CONFIG_SRCDIR([./xen/common/kernel.c])
> AC_CONFIG_FILES([
> config/Toplevel.mk
> diff --git a/docs/configure b/docs/configure
> index fdfc110311..9e3ed60462 100755
> --- a/docs/configure
> +++ b/docs/configure
> @@ -582,7 +582,7 @@ PACKAGE_TARNAME='xen'
> PACKAGE_VERSION='4.14'
> PACKAGE_STRING='Xen Hypervisor Documentation 4.14'
> PACKAGE_BUGREPORT='xen-devel@lists.xen.org'
> -PACKAGE_URL='http://www.xen.org/'
> +PACKAGE_URL='https://www.xen.org/'
>
> ac_unique_file="misc/xen-command-line.pandoc"
> ac_subst_vars='LTLIBOBJS
> @@ -1320,7 +1320,7 @@ Use these variables to override the choices made by `configure' or to help
> it to find libraries and programs with nonstandard names/locations.
>
> Report bugs to <xen-devel@lists.xen.org>.
> -Xen Hypervisor Documentation home page: <http://www.xen.org/>.
> +Xen Hypervisor Documentation home page: <https://www.xen.org/>.
> _ACEOF
> ac_status=$?
> fi
> @@ -2857,7 +2857,7 @@ Configuration files:
> $config_files
>
> Report bugs to <xen-devel@lists.xen.org>.
> -Xen Hypervisor Documentation home page: <http://www.xen.org/>."
> +Xen Hypervisor Documentation home page: <https://www.xen.org/>."
>
> _ACEOF
> cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
> diff --git a/docs/configure.ac b/docs/configure.ac
> index e795bec04c..cb5a6eaa4c 100644
> --- a/docs/configure.ac
> +++ b/docs/configure.ac
> @@ -3,7 +3,7 @@
>
> AC_PREREQ([2.67])
> AC_INIT([Xen Hypervisor Documentation], m4_esyscmd([../version.sh ../xen/Makefile]),
> - [xen-devel@lists.xen.org], [xen], [http://www.xen.org/])
> + [xen-devel@lists.xen.org], [xen], [https://www.xen.org/])
> AC_CONFIG_SRCDIR([misc/xen-command-line.pandoc])
> AC_CONFIG_FILES([
> ../config/Docs.mk
> diff --git a/docs/misc/9pfs.pandoc b/docs/misc/9pfs.pandoc
> index a4dc86f639..b034fb5fa6 100644
> --- a/docs/misc/9pfs.pandoc
> +++ b/docs/misc/9pfs.pandoc
> @@ -415,5 +415,5 @@ the *size* field of the 9pfs header.
>
> [paper]: https://www.usenix.org/legacy/event/usenix05/tech/freenix/full_papers/hensbergen/hensbergen.pdf
> [website]: https://github.com/chaos/diod/blob/master/protocol.md
> -[XenbusStateInitialising]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xenbus.h.html
> -[ring.h]: http://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=xen/include/public/io/ring.h;hb=HEAD
> +[XenbusStateInitialising]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xenbus.h.html
> +[ring.h]: https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=xen/include/public/io/ring.h;hb=HEAD
> diff --git a/docs/misc/livepatch.pandoc b/docs/misc/livepatch.pandoc
> index 9473ad5991..d38e4ce074 100644
> --- a/docs/misc/livepatch.pandoc
> +++ b/docs/misc/livepatch.pandoc
> @@ -88,7 +88,7 @@ mechanism. See `Trampoline (e9 opcode)` section for more details.
> ### Example of trampoline and in-place splicing
>
> As example we will assume the hypervisor does not have XSA-132 (see
> -[domctl/sysctl: don't leak hypervisor stack to toolstacks](http://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=4ff3449f0e9d175ceb9551d3f2aecb59273f639d))
> +[domctl/sysctl: don't leak hypervisor stack to toolstacks](https://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=4ff3449f0e9d175ceb9551d3f2aecb59273f639d))
> and we would like to binary patch the hypervisor with it. The original code
> looks as so:
>
> @@ -157,7 +157,7 @@ CPU branching logic (I-cache, but it is just one unconditional jump).
>
> For this example we will assume that the hypervisor has not been compiled with
> XSA-125 (see
> -[pre-fill structures for certain HYPERVISOR_xen_version sub-ops](http://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=fe2e079f642effb3d24a6e1a7096ef26e691d93e))
> +[pre-fill structures for certain HYPERVISOR_xen_version sub-ops](https://xenbits.xen.org/gitweb/?p=xen.git;a=commitdiff;h=fe2e079f642effb3d24a6e1a7096ef26e691d93e))
> which mem-sets an structure in `xen_version` hypercall. This function is not
> called **anywhere** in the hypervisor (it is called by the guest) but
> referenced in the `compat_hypercall_table` and `hypercall_table` (and
> diff --git a/docs/misc/pvcalls.pandoc b/docs/misc/pvcalls.pandoc
> index 729cf97bdf..665dad556c 100644
> --- a/docs/misc/pvcalls.pandoc
> +++ b/docs/misc/pvcalls.pandoc
> @@ -1078,8 +1078,8 @@ only as many bytes as available in the buffer up to *[in|out]_prod*.
> reading from the socket.
>
>
> -[xenstore]: http://xenbits.xen.org/docs/unstable/misc/xenstore.txt
> -[XenbusStateInitialising]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xenbus.h.html
> +[xenstore]: https://xenbits.xen.org/docs/unstable/misc/xenstore.txt
> +[XenbusStateInitialising]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xenbus.h.html
> [address]: http://pubs.opengroup.org/onlinepubs/7908799/xns/syssocket.h.html
> [in]: http://pubs.opengroup.org/onlinepubs/000095399/basedefs/netinet/in.h.html
> [socket]: http://pubs.opengroup.org/onlinepubs/009695399/functions/socket.html
> @@ -1089,4 +1089,4 @@ reading from the socket.
> [listen]: http://pubs.opengroup.org/onlinepubs/7908799/xns/listen.html
> [accept]: http://pubs.opengroup.org/onlinepubs/7908799/xns/accept.html
> [poll]: http://pubs.opengroup.org/onlinepubs/7908799/xsh/poll.html
> -[ring.h]: http://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=xen/include/public/io/ring.h;hb=HEAD
> +[ring.h]: https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=xen/include/public/io/ring.h;hb=HEAD
> diff --git a/docs/misc/xen-command-line.pandoc b/docs/misc/xen-command-line.pandoc
> index 6ff317d15d..acd0b3d994 100644
> --- a/docs/misc/xen-command-line.pandoc
> +++ b/docs/misc/xen-command-line.pandoc
> @@ -2294,7 +2294,7 @@ provide access to a wealth of low level processor information.
>
> *Warning:*
> As the virtualisation is not 100% safe, don't use the vpmu flag on
> -production systems (see http://xenbits.xen.org/xsa/advisory-163.html)!
> +production systems (see https://xenbits.xen.org/xsa/advisory-163.html)!
>
> ### vwfi (arm)
> > `= trap | native`
> diff --git a/docs/misc/xenstore-paths.pandoc b/docs/misc/xenstore-paths.pandoc
> index ff3ca04069..a152f5ea68 100644
> --- a/docs/misc/xenstore-paths.pandoc
> +++ b/docs/misc/xenstore-paths.pandoc
> @@ -636,14 +636,14 @@ for the toolstack to obtain e.g. the domain id of a xenstore domain.
> Domain Id of the xenstore domain in case xenstore is provided via a
> domain instead of a daemon in dom0.
>
> -[BLKIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,blkif.h.html
> -[FBIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,fbif.h.html
> -[HVMPARAMS]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,hvm,params.h.html
> -[KBDIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,kbdif.h.html
> -[LIBXLMEM]: http://xenbits.xen.org/docs/unstable/misc/libxl_memory.txt
> -[NETIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,netif.h.html
> -[SCSIIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,vscsiif.h.html
> -[SI]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,xen.h.html#Struct_start_info
> -[USBIF]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,usbif.h.html
> -[VCPU]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,vcpu.h.html
> -[XSWIRE]: http://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xs_wire.h.html
> +[BLKIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,blkif.h.html
> +[FBIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,fbif.h.html
> +[HVMPARAMS]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,hvm,params.h.html
> +[KBDIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,kbdif.h.html
> +[LIBXLMEM]: https://xenbits.xen.org/docs/unstable/misc/libxl_memory.txt
> +[NETIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,netif.h.html
> +[SCSIIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,vscsiif.h.html
> +[SI]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,xen.h.html#Struct_start_info
> +[USBIF]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,usbif.h.html
> +[VCPU]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,vcpu.h.html
> +[XSWIRE]: https://xenbits.xen.org/docs/unstable/hypercall/x86_64/include,public,io,xs_wire.h.html
> diff --git a/docs/misc/xsm-flask.txt b/docs/misc/xsm-flask.txt
> index 40e5fc845e..2419c5cf29 100644
> --- a/docs/misc/xsm-flask.txt
> +++ b/docs/misc/xsm-flask.txt
> @@ -49,13 +49,13 @@ driver domains, or stub xenstored - even if those bugs do no worse
> than reduce the security of such a system to one whose device models,
> backend drivers, or xenstore, run in dom0.
>
> -For more information see http://xenbits.xen.org/xsa/advisory-77.html.
> +For more information see https://xenbits.xen.org/xsa/advisory-77.html.
>
> The following interfaces are covered by this statement. Interfaces
> not listed here are considered safe for disaggregation, security
> issues found in interfaces not listed here will be handled according
> to the normal security problem response policy
> -http://www.xenproject.org/security-policy.html.
> +https://www.xenproject.org/security-policy.html.
>
> __HYPERVISOR_domctl (xen/include/public/domctl.h)
>
> diff --git a/docs/process/branching-checklist.txt b/docs/process/branching-checklist.txt
> index 1dfa1a2ec7..e286e65962 100644
> --- a/docs/process/branching-checklist.txt
> +++ b/docs/process/branching-checklist.txt
> @@ -25,7 +25,7 @@ ov=4.0
>
> # update xendocs@xenbits docs generator to generate new stable branch
> # docs too. commit to git.
> -* make 13:37 <ijc> http://xenbits.xen.org/docs/4.2-testing/ is now live true
> +* make 13:37 <ijc> https://xenbits.xen.org/docs/4.2-testing/ is now live true
> #14:17 <ijc> HOWTO: login to xenbits. become "xendocs" . cd cronjobs . edit
> # xenbits-docs-all.sh in the obvious way. git commit
> ssh root@xenbits.xen.org
> diff --git a/stubdom/configure b/stubdom/configure
> index 8f0bdcf191..da03da535a 100755
> --- a/stubdom/configure
> +++ b/stubdom/configure
> @@ -582,7 +582,7 @@ PACKAGE_TARNAME='xen'
> PACKAGE_VERSION='4.14'
> PACKAGE_STRING='Xen Hypervisor Stub Domains 4.14'
> PACKAGE_BUGREPORT='xen-devel@lists.xen.org'
> -PACKAGE_URL='http://www.xen.org/'
> +PACKAGE_URL='https://www.xen.org/'
>
> ac_unique_file="xenstore-minios.cfg"
> ac_subst_vars='LTLIBOBJS
> @@ -1376,7 +1376,7 @@ Use these variables to override the choices made by `configure' or to help
> it to find libraries and programs with nonstandard names/locations.
>
> Report bugs to <xen-devel@lists.xen.org>.
> -Xen Hypervisor Stub Domains home page: <http://www.xen.org/>.
> +Xen Hypervisor Stub Domains home page: <https://www.xen.org/>.
> _ACEOF
> ac_status=$?
> fi
> @@ -4296,7 +4296,7 @@ Configuration files:
> $config_files
>
> Report bugs to <xen-devel@lists.xen.org>.
> -Xen Hypervisor Stub Domains home page: <http://www.xen.org/>."
> +Xen Hypervisor Stub Domains home page: <https://www.xen.org/>."
>
> _ACEOF
> cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
> diff --git a/stubdom/configure.ac b/stubdom/configure.ac
> index 9066dfaaa7..a2d514c021 100644
> --- a/stubdom/configure.ac
> +++ b/stubdom/configure.ac
> @@ -3,7 +3,7 @@
>
> AC_PREREQ([2.67])
> AC_INIT([Xen Hypervisor Stub Domains], m4_esyscmd([../version.sh ../xen/Makefile]),
> - [xen-devel@lists.xen.org], [xen], [http://www.xen.org/])
> + [xen-devel@lists.xen.org], [xen], [https://www.xen.org/])
> AC_CONFIG_SRCDIR([xenstore-minios.cfg])
> AC_CONFIG_FILES([../config/Stubdom.mk])
> AC_CONFIG_AUX_DIR([../])
> diff --git a/tools/configure b/tools/configure
> index 13ee7f135c..4fa5f7b937 100755
> --- a/tools/configure
> +++ b/tools/configure
> @@ -583,7 +583,7 @@ PACKAGE_TARNAME='xen'
> PACKAGE_VERSION='4.14'
> PACKAGE_STRING='Xen Hypervisor Tools 4.14'
> PACKAGE_BUGREPORT='xen-devel@lists.xen.org'
> -PACKAGE_URL='http://www.xen.org/'
> +PACKAGE_URL='https://www.xen.org/'
>
> ac_unique_file="libxl/libxl.c"
> # Factoring default headers for most tests.
> @@ -1611,7 +1611,7 @@ Use these variables to override the choices made by `configure' or to help
> it to find libraries and programs with nonstandard names/locations.
>
> Report bugs to <xen-devel@lists.xen.org>.
> -Xen Hypervisor Tools home page: <http://www.xen.org/>.
> +Xen Hypervisor Tools home page: <https://www.xen.org/>.
> _ACEOF
> ac_status=$?
> fi
> @@ -10373,7 +10373,7 @@ Configuration headers:
> $config_headers
>
> Report bugs to <xen-devel@lists.xen.org>.
> -Xen Hypervisor Tools home page: <http://www.xen.org/>."
> +Xen Hypervisor Tools home page: <https://www.xen.org/>."
>
> _ACEOF
> cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
> diff --git a/tools/configure.ac b/tools/configure.ac
> index f288d2cc3f..ea0272766f 100644
> --- a/tools/configure.ac
> +++ b/tools/configure.ac
> @@ -3,7 +3,7 @@
>
> AC_PREREQ([2.67])
> AC_INIT([Xen Hypervisor Tools], m4_esyscmd([../version.sh ../xen/Makefile]),
> - [xen-devel@lists.xen.org], [xen], [http://www.xen.org/])
> + [xen-devel@lists.xen.org], [xen], [https://www.xen.org/])
> AC_CONFIG_SRCDIR([libxl/libxl.c])
> AC_CONFIG_FILES([
> ../config/Tools.mk
> diff --git a/xen/arch/x86/hvm/vmx/vmx.c b/xen/arch/x86/hvm/vmx/vmx.c
> index d265ed46ad..1c398fdb6e 100644
> --- a/xen/arch/x86/hvm/vmx/vmx.c
> +++ b/xen/arch/x86/hvm/vmx/vmx.c
> @@ -2490,7 +2490,7 @@ const struct hvm_function_table * __init start_vmx(void)
>
> /*
> * Do not enable EPT when (!cpu_has_vmx_pat), to prevent security hole
> - * (refer to http://xenbits.xen.org/xsa/advisory-60.html).
> + * (refer to https://xenbits.xen.org/xsa/advisory-60.html).
> */
> if ( cpu_has_vmx_ept && (cpu_has_vmx_pat || opt_force_ept) )
> {
> diff --git a/xen/include/public/io/blkif.h b/xen/include/public/io/blkif.h
> index d4a34de94c..4cdba79aba 100644
> --- a/xen/include/public/io/blkif.h
> +++ b/xen/include/public/io/blkif.h
> @@ -118,7 +118,7 @@
> *
> * The underlying storage is not affected by the direct IO memory
> * lifetime bug. See:
> - * http://lists.xen.org/archives/html/xen-devel/2012-12/msg01154.html
> + * https://lists.xen.org/archives/html/xen-devel/2012-12/msg01154.html
> *
> * Therefore this option gives the backend permission to use
> * O_DIRECT, notwithstanding that bug.
>
--
Julien Grall
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Xen-devel] [PATCH 1/3] docs etc.: https: Fix references to wiki.xen[project.org
2020-03-30 14:06 ` Julien Grall
@ 2020-03-30 14:13 ` Ian Jackson
0 siblings, 0 replies; 8+ messages in thread
From: Ian Jackson @ 2020-03-30 14:13 UTC (permalink / raw)
To: Julien Grall
Cc: Stefano Stabellini, Wei Liu, Andrew Cooper, George Dunlap,
Anthony Perard, Yang Hongyang, Jan Beulich, Shriram Rajagopalan,
xen-devel
Julien Grall writes ("Re: [PATCH 1/3] docs etc.: https: Fix references to wiki.xen[project.org"):
> Hi Ian,
>
> Title: Did you intend to use {,project} rather than [project?
I intended to use [project]. Will fix.
Ian.
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2020-03-30 14:14 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-30 13:57 [Xen-devel] [PATCH 0/3] docs: Fix our url schemes to use https Ian Jackson
2020-03-30 13:57 ` [Xen-devel] [PATCH 1/3] docs etc.: https: Fix references to wiki.xen[project.org Ian Jackson
2020-03-30 14:06 ` Julien Grall
2020-03-30 14:13 ` Ian Jackson
2020-03-30 13:57 ` [Xen-devel] [PATCH 2/3] docs etc.: https: Fix references to other Xen pages Ian Jackson
2020-03-30 14:08 ` Julien Grall
2020-03-30 13:57 ` [Xen-devel] [PATCH 3/3] docs/README: Fix a broken url Ian Jackson
2020-03-30 14:07 ` Julien Grall
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).