* booting from nvme SSD
@ 2021-10-07 19:20 simon
0 siblings, 0 replies; only message in thread
From: simon @ 2021-10-07 19:20 UTC (permalink / raw)
To: yocto
Hi everyone,
I'm currently trying to move from an m.2 SATA SSD to an m.2 nvme SSD for
our project, without success.
I'm using an Intel NUC7 board that has an m.2 slot which should support
(from the datasheet) both SATA and nvme SSD.
I'm able to see the grub menu from the nvme drive but when I try to boot
to a partition I get stuck on a black screen.
Which makes me believe that the bios is able to access and read the nvme
SSD (or at least the boot partition)
I can't figure out if I'm missing a driver or if I need something
specific in our wks file to support nvme SSD
I have tested the nvme SSD with an external m.2 to USB adaptor to verify
that it's working properly
I would like to know if there's anything I should look into.
I'm currently on warrior but I believe i had a similar issue with
dunfell as well...
Smon
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2021-10-07 19:22 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-07 19:20 booting from nvme SSD simon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).