All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-marvell/master
Date: Tue, 19 Mar 2019 13:49:46 +0100	[thread overview]
Message-ID: <03c97d82-e240-943f-7f0c-8c6f25cfb7d2@denx.de> (raw)

Hi Tom,

please pull the following Marvell related patches, mostly fixes
which should go into the upcoming release:

----------------------------------------------------------------
- Enable network interface on clearfog_gt_8k (Baruch)
- Fix dreamplug boot by adding an spi0 alias to the DT (Chris)
- Fix / enhance Marvell ddr3 setup / parameters (Chris)
- Change CONFIG_SYS_MALLOC_F_LEN to 0x2000 on db-88f6820-amc (Chris)
- Enable SPL_FLASH_BAR on db-88f6820-amc (Chris)
- Use correct pcie controller name in Armada-38x dts files (Chris)
- Disable d-cache on Kirkwood platforms as currently needed (Chris)
- Add a more descriptive comment to pci_mvebu.c (Stefan)
- Update Marvell maintainers entry (Stefan)
----------------------------------------------------------------

Thanks,
Stefan


The following changes since commit 374bf7af033aa326a9585c5ff878d206e90c0c1c:

   Prepare v2019.04-rc4 (2019-03-18 21:14:02 -0400)

are available in the Git repository at:

   git://www.denx.de/git/u-boot-marvell.git

for you to fetch changes up to 599f7aa541bb5a658cbfd2af73bd9d2f6e828d43:

   ARM: kirkwood: disable dcache for Kirkwood boards (2019-03-19 09:22:05 +0100)

----------------------------------------------------------------
Baruch Siach (1):
       configs/clearfog_gt_8k: add network interface support

Chris Packham (7):
       ARM: kirkwood: add spi0 alias for dreamplug
       mv_ddr: ddr3: fix tRAS timimg parameter
       mv_ddr: ddr3: only use active chip-selects when tuning ODT
       ARM: mvebu: set CONFIG_SYS_MALLOC_F_LEN to 0x2000
       ARM: mvebu: db-88f6820-amc: enable SPI_FLASH_BAR
       ARM: mvebu: use correct name for pcie controller
       ARM: kirkwood: disable dcache for Kirkwood boards

Stefan Roese (2):
       pci: pci_mvebu: Add comment about missing of_n_addr_cells() call
       MAINTAINERS: Update u-boot-marvell entry

  MAINTAINERS                                      | 11 +++++++----
  arch/arm/dts/armada-385-amc.dts                  |  2 +-
  arch/arm/dts/armada-385-turris-omnia.dts         |  2 +-
  arch/arm/dts/armada-388-clearfog.dts             |  2 +-
  arch/arm/dts/armada-388-gp.dts                   |  2 +-
  arch/arm/dts/armada-38x-controlcenterdc.dts      |  2 +-
  arch/arm/dts/kirkwood-dreamplug.dts              |  4 ++++
  arch/arm/mach-kirkwood/include/mach/config.h     |  6 ++++++
  configs/clearfog_gt_8k_defconfig                 |  4 +++-
  configs/db-88f6820-amc_defconfig                 |  2 ++
  drivers/ddr/marvell/a38x/ddr3_training_db.c      |  8 ++++----
  drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c |  3 ++-
  drivers/pci/pci_mvebu.c                          |  6 ++++++
  13 files changed, 39 insertions(+), 15 deletions(-)

             reply	other threads:[~2019-03-19 12:49 UTC|newest]

Thread overview: 130+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-19 12:49 Stefan Roese [this message]
2019-03-20 13:46 ` [U-Boot] Please pull u-boot-marvell/master Tom Rini
  -- strict thread matches above, loose matches on Subject: below --
2019-11-14  7:39 Stefan Roese
2019-11-18  2:14 ` Tom Rini
2019-08-12 12:08 Stefan Roese
2019-08-13 16:50 ` Tom Rini
2019-07-11 16:01 Stefan Roese
2019-07-12 13:32 ` Tom Rini
2019-06-04  6:39 Stefan Roese
2019-06-05 14:24 ` Tom Rini
2019-05-27 11:35 Stefan Roese
2019-05-27 18:35 ` Tom Rini
2019-05-20  7:59 Stefan Roese
2019-05-20 17:53 ` Tom Rini
2019-05-09 10:08 Stefan Roese
2019-05-09 22:25 ` Tom Rini
2019-05-03 11:49 Stefan Roese
2019-05-04 17:01 ` Tom Rini
2019-04-26 10:58 Stefan Roese
2019-04-27 14:48 ` Tom Rini
2019-04-11 12:34 Stefan Roese
2019-04-11 14:49 ` Tom Rini
2019-04-11 14:51   ` Stefan Roese
2019-04-11 14:52     ` Tom Rini
2019-02-11 12:34 Stefan Roese
2019-02-11 22:41 ` Tom Rini
2019-02-05 13:36 Stefan Roese
2019-02-08  3:13 ` Tom Rini
2019-01-21 10:52 Stefan Roese
2019-01-22  2:29 ` Tom Rini
2018-12-21 15:31 Stefan Roese
2018-12-23 17:31 ` Tom Rini
2018-12-09 10:15 Stefan Roese
2018-12-09 21:44 ` Chris Packham
2018-12-09 22:11 ` Tom Rini
2018-11-30 14:45 Stefan Roese
2018-11-30 22:09 ` Tom Rini
2018-11-20 12:15 Stefan Roese
2018-11-20 21:48 ` Tom Rini
2018-09-19 15:12 Stefan Roese
2018-09-20 13:24 ` Tom Rini
2018-08-07 13:10 Stefan Roese
2018-08-08  1:35 ` Tom Rini
2018-06-05  9:33 Stefan Roese
2018-06-05 14:14 ` Tom Rini
2018-05-16 12:05 Stefan Roese
2018-05-16 15:37 ` Tom Rini
2018-05-17  8:36   ` Chris Packham
2018-05-17  8:45     ` Chris Packham
2018-05-17  8:48       ` Stefan Roese
2018-05-17  9:06         ` Chris Packham
2018-05-14 11:58 Stefan Roese
2018-05-14 15:11 ` Tom Rini
2018-05-14 15:16   ` Stefan Roese
2018-05-15  1:23     ` Chris Packham
2018-04-17  8:53 Stefan Roese
2018-04-17 19:39 ` Tom Rini
2018-01-29 12:42 Stefan Roese
2018-01-29 16:55 ` Tom Rini
2018-01-20  9:01 Stefan Roese
2018-01-20 16:58 ` Tom Rini
2018-01-10 11:40 Stefan Roese
2018-01-10 16:42 ` Tom Rini
2017-11-30 12:33 Stefan Roese
2017-11-30 18:45 ` Tom Rini
2017-11-16 13:09 Stefan Roese
2017-11-17  1:52 ` Tom Rini
2017-09-26  8:55 Stefan Roese
2017-09-27  2:45 ` Tom Rini
2017-08-30  8:06 Stefan Roese
2017-09-01 16:42 ` Tom Rini
2017-08-21  9:43 Stefan Roese
2017-08-22 20:53 ` Tom Rini
2017-08-10  8:26 Stefan Roese
2017-08-10 20:17 ` Tom Rini
2017-08-08 12:26 Stefan Roese
2017-08-09 15:26 ` Tom Rini
2017-07-12  6:00 Stefan Roese
2017-07-12 14:25 ` Tom Rini
2017-06-23  8:42 Stefan Roese
2017-06-23 13:22 ` Tom Rini
2017-05-31  9:02 Stefan Roese
2017-06-01 12:10 ` Tom Rini
2017-05-09 14:45 Stefan Roese
2017-05-09 23:49 ` Tom Rini
2017-03-29  9:24 Stefan Roese
2017-04-04 20:00 ` Tom Rini
2017-03-24  5:58 Stefan Roese
2017-03-24 17:36 ` Tom Rini
2017-02-17 11:15 Stefan Roese
2017-02-17 22:56 ` Tom Rini
2017-02-01 11:46 Stefan Roese
2017-02-01 21:33 ` Tom Rini
2017-01-25  7:46 Stefan Roese
2017-01-27  1:43 ` Tom Rini
2016-12-21  9:56 Stefan Roese
2016-12-21 13:06 ` Tom Rini
2016-12-12 10:47 Stefan Roese
2016-12-12 15:56 ` Tom Rini
2016-12-05 13:01 Stefan Roese
2016-12-05 16:01 ` Tom Rini
2016-12-01 12:57 Stefan Roese
2016-12-01 18:16 ` Tom Rini
2016-10-09  9:05 Stefan Roese
2016-10-13  0:48 ` Tom Rini
2016-09-27 15:33 Stefan Roese
2016-09-27 21:32 ` Tom Rini
2016-09-24  8:13 Stefan Roese
2016-09-24 16:04 ` Tom Rini
2016-08-26  6:46 Stefan Roese
2016-08-26 14:52 ` Tom Rini
2016-05-31  6:08 Stefan Roese
2016-05-31 14:50 ` Tom Rini
2016-05-20  9:10 Stefan Roese
2016-05-23 22:12 ` Tom Rini
2016-04-12  9:19 Stefan Roese
2016-04-12 17:23 ` Tom Rini
2016-04-12 17:23 ` Tom Rini
2016-04-06 13:47 Stefan Roese
2016-04-06 14:47 ` Tom Rini
2016-04-04 12:07 Stefan Roese
2016-04-05  0:01 ` Tom Rini
2016-03-24 10:09 Stefan Roese
2016-03-25 22:59 ` Tom Rini
2016-03-14 22:37 Luka Perkov
2016-03-15 11:52 ` Tom Rini
2016-01-27  6:58 Stefan Roese
2016-01-28 23:18 ` Tom Rini
2016-01-14 13:28 Stefan Roese
2016-01-14 18:04 ` Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=03c97d82-e240-943f-7f0c-8c6f25cfb7d2@denx.de \
    --to=sr@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.