All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-marvell/master
Date: Mon, 21 Jan 2019 11:52:54 +0100	[thread overview]
Message-ID: <8ff7f2b4-917b-8239-048c-3b00e944f963@denx.de> (raw)

Hi Tom,

please pull the first Marvell patches in this merge window with the
following changes:

----------------------------------------------------------------
- Sync Armada-38x dts with Linux 4.20 from Chris
- Misc changes and enhancements to Turris Mox (v4) from Marek
- Reserve PSCI area for Armada 8k from Heinrich
- New Allied Telesis x530 board (Armada-385) from Chris
- Misc minor changes (defconfig etc)
----------------------------------------------------------------

Thanks,
Stefan


The following changes since commit 2acc24fc28ef782f4baef1aa0193d520ee9610b9:

   Kconfig: Migrate BOUNCE_BUFFER (2019-01-19 09:49:26 -0500)

are available in the Git repository at:

   git://www.denx.de/git/u-boot-marvell.git

for you to fetch changes up to 0e31666dfa043ab71fb1fbbba4feacfe8af3e06b:

   ARM: mvebu: add support for Allied Telesis x530 (2019-01-21 11:39:50 +0100)

----------------------------------------------------------------
Baruch Siach (1):
       board: mvebu: drop unused ETH_PHY macro definitions

Chris Packham (2):
       ARM: mvebu: sync Armada-38x dts with Linux 4.20
       ARM: mvebu: add support for Allied Telesis x530

Heinrich Schuchardt (2):
       arm64: dts: marvell: armada-ap806: reserve PSCI area
       arm64: mvebu: defconfig: enable CONFIG_CMD_NVME

Marek Behún (10):
       arm: mvebu: turris_mox: Cosmetic restructurization
       arm: mvebu: turris_mox: Change SERDES map depending on module topology
       arm: mvebu: turris_mox: Check and configure modules
       arm: mvebu: dts: Fix Turris Mox device tree
       arm: mvebu: turris_mox: Update defconfig
       watchdog: armada_37xx: Fix compliance with kernel's driver
       MAINTAINERS: Add entry for CZ.NIC's Turris project
       arm: mvebu: turris_mox: Read info (and ethaddrs) from OTP
       arm: mvebu: turris_mox: Support 1 GB version of Turris Mox
       arm: mvebu: configs: turris_mox: Add 64 MiB of boot memory

  MAINTAINERS                                   |   8 +
  arch/arm/dts/Makefile                         |   4 +-
  arch/arm/dts/armada-3720-turris-mox.dts       |  23 +-
  arch/arm/dts/armada-380.dtsi                  |  44 +--
  arch/arm/dts/armada-385-atl-x530-u-boot.dtsi  |  13 +
  arch/arm/dts/armada-385-atl-x530.dts          |  50 +++
  arch/arm/dts/armada-385-atl-x530.dtsi         | 266 +++++++++++++++
  arch/arm/dts/armada-385-atl-x530DP.dts        |  51 +++
  arch/arm/dts/armada-385-atl-x530DP.dtsi       | 149 +++++++++
  arch/arm/dts/armada-385.dtsi                  |  63 +---
  arch/arm/dts/armada-388-clearfog.dts          |  25 +-
  arch/arm/dts/armada-388.dtsi                  |  43 +--
  arch/arm/dts/armada-38x-controlcenterdc.dts   |  68 ++--
  arch/arm/dts/armada-38x.dtsi                  | 283 +++++++++-------
  arch/arm/dts/armada-ap806.dtsi                |  11 +
  arch/arm/mach-mvebu/Kconfig                   |   7 +
  arch/arm/mach-mvebu/arm64-common.c            |   4 +-
  board/CZ.NIC/turris_mox/Makefile              |   2 +-
  board/CZ.NIC/turris_mox/mox_sp.c              | 136 ++++++++
  board/CZ.NIC/turris_mox/mox_sp.h              |  15 +
  board/CZ.NIC/turris_mox/turris_mox.c          | 462 +++++++++++++++++++++++---
  board/Marvell/db-88f6820-amc/db-88f6820-amc.c |   4 -
  board/Marvell/db-88f6820-gp/db-88f6820-gp.c   |   4 -
  board/alliedtelesis/common/gpio_hog.c         |  36 ++
  board/alliedtelesis/common/gpio_hog.h         |  13 +
  board/alliedtelesis/x530/MAINTAINERS          |  12 +
  board/alliedtelesis/x530/Makefile             |   9 +
  board/alliedtelesis/x530/kwbimage.cfg         |  12 +
  board/alliedtelesis/x530/x530.c               | 161 +++++++++
  board/gdsys/a38x/controlcenterdc.c            |   4 -
  board/kobol/helios4/helios4.c                 |   4 -
  board/solidrun/clearfog/clearfog.c            |   4 -
  configs/clearfog_gt_8k_defconfig              |   2 +
  configs/mvebu_db_armada8k_defconfig           |   2 +
  configs/mvebu_mcbin-88f8040_defconfig         |   2 +
  configs/turris_mox_defconfig                  |   6 +
  configs/x530_defconfig                        |  71 ++++
  drivers/watchdog/armada-37xx-wdt.c            | 109 +++---
  include/configs/turris_mox.h                  |   2 +
  include/configs/x530.h                        | 134 ++++++++
  40 files changed, 1918 insertions(+), 400 deletions(-)
  create mode 100644 arch/arm/dts/armada-385-atl-x530-u-boot.dtsi
  create mode 100644 arch/arm/dts/armada-385-atl-x530.dts
  create mode 100644 arch/arm/dts/armada-385-atl-x530.dtsi
  create mode 100644 arch/arm/dts/armada-385-atl-x530DP.dts
  create mode 100644 arch/arm/dts/armada-385-atl-x530DP.dtsi
  create mode 100644 board/CZ.NIC/turris_mox/mox_sp.c
  create mode 100644 board/CZ.NIC/turris_mox/mox_sp.h
  create mode 100644 board/alliedtelesis/common/gpio_hog.c
  create mode 100644 board/alliedtelesis/common/gpio_hog.h
  create mode 100644 board/alliedtelesis/x530/MAINTAINERS
  create mode 100644 board/alliedtelesis/x530/Makefile
  create mode 100644 board/alliedtelesis/x530/kwbimage.cfg
  create mode 100644 board/alliedtelesis/x530/x530.c
  create mode 100644 configs/x530_defconfig
  create mode 100644 include/configs/x530.h

             reply	other threads:[~2019-01-21 10:52 UTC|newest]

Thread overview: 130+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-21 10:52 Stefan Roese [this message]
2019-01-22  2:29 ` [U-Boot] Please pull u-boot-marvell/master Tom Rini
  -- strict thread matches above, loose matches on Subject: below --
2019-11-14  7:39 Stefan Roese
2019-11-18  2:14 ` Tom Rini
2019-08-12 12:08 Stefan Roese
2019-08-13 16:50 ` Tom Rini
2019-07-11 16:01 Stefan Roese
2019-07-12 13:32 ` Tom Rini
2019-06-04  6:39 Stefan Roese
2019-06-05 14:24 ` Tom Rini
2019-05-27 11:35 Stefan Roese
2019-05-27 18:35 ` Tom Rini
2019-05-20  7:59 Stefan Roese
2019-05-20 17:53 ` Tom Rini
2019-05-09 10:08 Stefan Roese
2019-05-09 22:25 ` Tom Rini
2019-05-03 11:49 Stefan Roese
2019-05-04 17:01 ` Tom Rini
2019-04-26 10:58 Stefan Roese
2019-04-27 14:48 ` Tom Rini
2019-04-11 12:34 Stefan Roese
2019-04-11 14:49 ` Tom Rini
2019-04-11 14:51   ` Stefan Roese
2019-04-11 14:52     ` Tom Rini
2019-03-19 12:49 Stefan Roese
2019-03-20 13:46 ` Tom Rini
2019-02-11 12:34 Stefan Roese
2019-02-11 22:41 ` Tom Rini
2019-02-05 13:36 Stefan Roese
2019-02-08  3:13 ` Tom Rini
2018-12-21 15:31 Stefan Roese
2018-12-23 17:31 ` Tom Rini
2018-12-09 10:15 Stefan Roese
2018-12-09 21:44 ` Chris Packham
2018-12-09 22:11 ` Tom Rini
2018-11-30 14:45 Stefan Roese
2018-11-30 22:09 ` Tom Rini
2018-11-20 12:15 Stefan Roese
2018-11-20 21:48 ` Tom Rini
2018-09-19 15:12 Stefan Roese
2018-09-20 13:24 ` Tom Rini
2018-08-07 13:10 Stefan Roese
2018-08-08  1:35 ` Tom Rini
2018-06-05  9:33 Stefan Roese
2018-06-05 14:14 ` Tom Rini
2018-05-16 12:05 Stefan Roese
2018-05-16 15:37 ` Tom Rini
2018-05-17  8:36   ` Chris Packham
2018-05-17  8:45     ` Chris Packham
2018-05-17  8:48       ` Stefan Roese
2018-05-17  9:06         ` Chris Packham
2018-05-14 11:58 Stefan Roese
2018-05-14 15:11 ` Tom Rini
2018-05-14 15:16   ` Stefan Roese
2018-05-15  1:23     ` Chris Packham
2018-04-17  8:53 Stefan Roese
2018-04-17 19:39 ` Tom Rini
2018-01-29 12:42 Stefan Roese
2018-01-29 16:55 ` Tom Rini
2018-01-20  9:01 Stefan Roese
2018-01-20 16:58 ` Tom Rini
2018-01-10 11:40 Stefan Roese
2018-01-10 16:42 ` Tom Rini
2017-11-30 12:33 Stefan Roese
2017-11-30 18:45 ` Tom Rini
2017-11-16 13:09 Stefan Roese
2017-11-17  1:52 ` Tom Rini
2017-09-26  8:55 Stefan Roese
2017-09-27  2:45 ` Tom Rini
2017-08-30  8:06 Stefan Roese
2017-09-01 16:42 ` Tom Rini
2017-08-21  9:43 Stefan Roese
2017-08-22 20:53 ` Tom Rini
2017-08-10  8:26 Stefan Roese
2017-08-10 20:17 ` Tom Rini
2017-08-08 12:26 Stefan Roese
2017-08-09 15:26 ` Tom Rini
2017-07-12  6:00 Stefan Roese
2017-07-12 14:25 ` Tom Rini
2017-06-23  8:42 Stefan Roese
2017-06-23 13:22 ` Tom Rini
2017-05-31  9:02 Stefan Roese
2017-06-01 12:10 ` Tom Rini
2017-05-09 14:45 Stefan Roese
2017-05-09 23:49 ` Tom Rini
2017-03-29  9:24 Stefan Roese
2017-04-04 20:00 ` Tom Rini
2017-03-24  5:58 Stefan Roese
2017-03-24 17:36 ` Tom Rini
2017-02-17 11:15 Stefan Roese
2017-02-17 22:56 ` Tom Rini
2017-02-01 11:46 Stefan Roese
2017-02-01 21:33 ` Tom Rini
2017-01-25  7:46 Stefan Roese
2017-01-27  1:43 ` Tom Rini
2016-12-21  9:56 Stefan Roese
2016-12-21 13:06 ` Tom Rini
2016-12-12 10:47 Stefan Roese
2016-12-12 15:56 ` Tom Rini
2016-12-05 13:01 Stefan Roese
2016-12-05 16:01 ` Tom Rini
2016-12-01 12:57 Stefan Roese
2016-12-01 18:16 ` Tom Rini
2016-10-09  9:05 Stefan Roese
2016-10-13  0:48 ` Tom Rini
2016-09-27 15:33 Stefan Roese
2016-09-27 21:32 ` Tom Rini
2016-09-24  8:13 Stefan Roese
2016-09-24 16:04 ` Tom Rini
2016-08-26  6:46 Stefan Roese
2016-08-26 14:52 ` Tom Rini
2016-05-31  6:08 Stefan Roese
2016-05-31 14:50 ` Tom Rini
2016-05-20  9:10 Stefan Roese
2016-05-23 22:12 ` Tom Rini
2016-04-12  9:19 Stefan Roese
2016-04-12 17:23 ` Tom Rini
2016-04-12 17:23 ` Tom Rini
2016-04-06 13:47 Stefan Roese
2016-04-06 14:47 ` Tom Rini
2016-04-04 12:07 Stefan Roese
2016-04-05  0:01 ` Tom Rini
2016-03-24 10:09 Stefan Roese
2016-03-25 22:59 ` Tom Rini
2016-03-14 22:37 Luka Perkov
2016-03-15 11:52 ` Tom Rini
2016-01-27  6:58 Stefan Roese
2016-01-28 23:18 ` Tom Rini
2016-01-14 13:28 Stefan Roese
2016-01-14 18:04 ` Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8ff7f2b4-917b-8239-048c-3b00e944f963@denx.de \
    --to=sr@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.