From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-marvell/master
Date: Thu, 14 Jan 2016 14:28:20 +0100 [thread overview]
Message-ID: <5697A274.1020103@denx.de> (raw)
Hi Tom,
please pull all the pending Marvell patches, mostly Armada
XP and 38x related.
Thanks,
Stefan
The following changes since commit d29892ba854f40980b84f86566cd0c2308c66afe:
part_dos.c: Don't wrap to negative after 2G sectors (2016-01-13 16:33:20 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to f822d8578ba395d9af1cc315a2fb87b1eed3d355:
MAINTAINERS: Update Marvell custodianship (2016-01-14 14:17:36 +0100)
----------------------------------------------------------------
Phil Sutter (10):
drivers/pci: Fix for debug builds without CONFIG_PCI_ENUM_ONLY
README: Review the u-boot porting guide list
axp: Fix debugging support in DDR3 write leveling
drivers/pci/pci_mvebu: Fix for boards with X4 lanes
mvebu: axp: refactor board_sat_r_get() and caller
mvebu: Introduce kconfig symbols for SoC variants
mvebu: axp: Rename MV_DDR_32BIT to CONFIG_DDR_32BIT
mvebu: Add rudimental MV78230 support
mvebu: Support Synology DS414
mvebu: ds414: Implement Synology specific command set
Stefan Roese (34):
arm: mvebu/kirkwood: Use common timer functions
arm: mvebu: ddr: Fix compilation warning
arm: mvebu: Add DM and OF_CONTROL support to SPL
spi: kirkwood_spi.c: Prepare for driver model support
spi: kirkwood_spi.c: Add driver model support
arm: mvebu: Add SPI driver model support
arm: mvebu: Add armada-xp-maxbcm.dts for maxbcm board
arm: mvebu: armada-388-gp.dts: Add ethernet aliases
net: mvneta: Convert to driver model
arm: mvebu: Move some defines to common include file
arm: mvebu: Add SolidRun ClearFog Armada 38x initial support
arm: mvebu: db-mv784mp-gp: Switch from IDE to SATA support
arm: mvebu: db-mv784mp-gp: Enable common file-system support
arm: mvebu: db-mv784mp-gp: Enable cache command
arm: mvebu: Enable L2 cache on Armada XP
arm: mvebu: Add v7_outer_cache_disable function for AXP & A38x
arm: mvebu: Don't call arch_cpu_init() from SPL at all
arm: mvebu: Remove SYS_MALLOC_CLEAR_ON_INIT from DB-MV784MP-GP AXP board
arm: mvebu: Don't disable cache at startup on Armada XP at all
arm: mvebu: Simplify code in setup_usb_phys() a bit
arm: mvebu: Don't use 0 as board ID as its used for the custom boards
arm: mvebu: Add support for MV78260
arm: mvebu: Make ECC support configurable on Armada XP
arm: mvebu: Don't include "netdev.h" in cpu.c
arm: mvebu: Make serdes setup on Armada XP less noisy
arm: mvebu: Print CPU and SDRAM frequency upon startup
arm: mvebu: Consolidate board Kconfig options into one file
arm: mvebu: Move SoC selection (A38X vs AXP) into Kconfig
arm: mvebu: Remove leftover Makefile
arm: mvebu: Move SAR register defines into header
arm: mvebu: Make local structs static const
arm: mvebu: Add runtime boot-device detection
arm: mvebu: Add runtime detection of UART (xmodem) boot-mode
MAINTAINERS: Update Marvell custodianship
Tor Krill (1):
sata: Add SATA driver with DMA support for Marvell Kirkwood and Armada XP
MAINTAINERS | 4 +-
Makefile | 10 -
README | 11 +-
arch/arm/Kconfig | 9 +-
arch/arm/Makefile | 2 +-
arch/arm/dts/Makefile | 5 +-
arch/arm/dts/armada-370-xp.dtsi | 1 +
arch/arm/dts/armada-388-clearfog.dts | 509 ++++++++++
arch/arm/dts/armada-388-gp.dts | 9 +
arch/arm/dts/armada-38x.dtsi | 2 +
arch/arm/dts/armada-xp-gp.dts | 7 +
arch/arm/dts/armada-xp-maxbcm.dts | 249 +++++
arch/arm/dts/armada-xp-synology-ds414.dts | 337 +++++++
arch/arm/dts/armada-xp.dtsi | 1 +
arch/arm/mach-kirkwood/include/mach/config.h | 5 +
arch/arm/mach-mvebu/Kconfig | 63 +-
arch/arm/mach-mvebu/Makefile | 8 +-
arch/arm/mach-mvebu/cpu.c | 207 ++--
arch/arm/mach-mvebu/dram.c | 20 +-
arch/arm/mach-mvebu/include/mach/config.h | 26 +-
arch/arm/mach-mvebu/include/mach/cpu.h | 10 +
arch/arm/mach-mvebu/include/mach/soc.h | 63 +-
arch/arm/mach-mvebu/lowlevel_spl.S | 6 -
arch/arm/mach-mvebu/mbus.c | 2 +-
arch/arm/mach-mvebu/serdes/axp/board_env_spec.h | 4 +-
.../arm/mach-mvebu/serdes/axp/high_speed_env_lib.c | 88 +-
arch/arm/mach-mvebu/spl.c | 87 +-
arch/arm/mach-mvebu/timer.c | 136 +--
arch/arm/mach-mvebu/u-boot-spl.lds | 57 --
arch/arm/mvebu-common/Makefile | 14 -
board/Marvell/db-88f6820-gp/Kconfig | 12 -
board/Marvell/db-88f6820-gp/kwbimage.cfg | 2 +-
board/Marvell/db-mv784mp-gp/Kconfig | 12 -
board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c | 32 +-
board/Marvell/db-mv784mp-gp/kwbimage.cfg | 2 +-
board/Synology/common/Makefile | 7 +
board/Synology/common/cmd_syno.c | 227 +++++
board/Synology/ds414/Makefile | 7 +
board/Synology/ds414/ds414.c | 185 ++++
board/Synology/ds414/kwbimage.cfg | 12 +
board/maxbcm/Kconfig | 9 -
board/maxbcm/kwbimage.cfg | 2 +-
board/maxbcm/maxbcm.c | 20 +-
board/solidrun/clearfog/MAINTAINERS | 6 +
board/solidrun/clearfog/Makefile | 7 +
board/solidrun/clearfog/README | 18 +
board/solidrun/clearfog/clearfog.c | 156 +++
board/solidrun/clearfog/kwbimage.cfg | 12 +
configs/clearfog_defconfig | 21 +
configs/db-88f6820-gp_defconfig | 6 +
configs/db-mv784mp-gp_defconfig | 7 +
configs/ds414_defconfig | 18 +
configs/maxbcm_defconfig | 8 +-
drivers/Makefile | 4 +-
drivers/block/Makefile | 1 +
drivers/block/mvsata_ide.c | 6 +-
drivers/block/sata_mv.c | 1045 ++++++++++++++++++++
drivers/ddr/marvell/a38x/ddr3_debug.c | 15 -
drivers/ddr/marvell/a38x/ddr3_training_ip.h | 2 -
drivers/ddr/marvell/axp/ddr3_axp.h | 3 +
drivers/ddr/marvell/axp/ddr3_axp_config.h | 7 +-
drivers/ddr/marvell/axp/ddr3_axp_mc_static.h | 20 +-
drivers/ddr/marvell/axp/ddr3_write_leveling.c | 4 +-
drivers/i2c/mvtwsi.c | 2 +-
drivers/net/mvneta.c | 230 +++--
drivers/pci/pci_auto_old.c | 2 +-
drivers/pci/pci_mvebu.c | 14 +
drivers/spi/kirkwood_spi.c | 217 +++-
include/configs/clearfog.h | 176 ++++
include/configs/db-88f6820-gp.h | 25 +-
include/configs/db-mv784mp-gp.h | 60 +-
include/configs/ds414.h | 162 +++
include/configs/maxbcm.h | 15 +-
tools/Makefile | 2 +-
tools/kwboot.c | 14 +-
75 files changed, 4047 insertions(+), 719 deletions(-)
create mode 100644 arch/arm/dts/armada-388-clearfog.dts
create mode 100644 arch/arm/dts/armada-xp-maxbcm.dts
create mode 100644 arch/arm/dts/armada-xp-synology-ds414.dts
delete mode 100644 arch/arm/mach-mvebu/u-boot-spl.lds
delete mode 100644 arch/arm/mvebu-common/Makefile
delete mode 100644 board/Marvell/db-88f6820-gp/Kconfig
delete mode 100644 board/Marvell/db-mv784mp-gp/Kconfig
create mode 100644 board/Synology/common/Makefile
create mode 100644 board/Synology/common/cmd_syno.c
create mode 100644 board/Synology/ds414/Makefile
create mode 100644 board/Synology/ds414/ds414.c
create mode 100644 board/Synology/ds414/kwbimage.cfg
delete mode 100644 board/maxbcm/Kconfig
create mode 100644 board/solidrun/clearfog/MAINTAINERS
create mode 100644 board/solidrun/clearfog/Makefile
create mode 100644 board/solidrun/clearfog/README
create mode 100644 board/solidrun/clearfog/clearfog.c
create mode 100644 board/solidrun/clearfog/kwbimage.cfg
create mode 100644 configs/clearfog_defconfig
create mode 100644 configs/ds414_defconfig
create mode 100644 drivers/block/sata_mv.c
create mode 100644 include/configs/clearfog.h
create mode 100644 include/configs/ds414.h
next reply other threads:[~2016-01-14 13:28 UTC|newest]
Thread overview: 130+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-14 13:28 Stefan Roese [this message]
2016-01-14 18:04 ` [U-Boot] Please pull u-boot-marvell/master Tom Rini
2016-01-27 6:58 Stefan Roese
2016-01-28 23:18 ` Tom Rini
2016-03-14 22:37 Luka Perkov
2016-03-15 11:52 ` Tom Rini
2016-03-24 10:09 Stefan Roese
2016-03-25 22:59 ` Tom Rini
2016-04-04 12:07 Stefan Roese
2016-04-05 0:01 ` Tom Rini
2016-04-06 13:47 Stefan Roese
2016-04-06 14:47 ` Tom Rini
2016-04-12 9:19 Stefan Roese
2016-04-12 17:23 ` Tom Rini
2016-04-12 17:23 ` Tom Rini
2016-05-20 9:10 Stefan Roese
2016-05-23 22:12 ` Tom Rini
2016-05-31 6:08 Stefan Roese
2016-05-31 14:50 ` Tom Rini
2016-08-26 6:46 Stefan Roese
2016-08-26 14:52 ` Tom Rini
2016-09-24 8:13 Stefan Roese
2016-09-24 16:04 ` Tom Rini
2016-09-27 15:33 Stefan Roese
2016-09-27 21:32 ` Tom Rini
2016-10-09 9:05 Stefan Roese
2016-10-13 0:48 ` Tom Rini
2016-12-01 12:57 Stefan Roese
2016-12-01 18:16 ` Tom Rini
2016-12-05 13:01 Stefan Roese
2016-12-05 16:01 ` Tom Rini
2016-12-12 10:47 Stefan Roese
2016-12-12 15:56 ` Tom Rini
2016-12-21 9:56 Stefan Roese
2016-12-21 13:06 ` Tom Rini
2017-01-25 7:46 Stefan Roese
2017-01-27 1:43 ` Tom Rini
2017-02-01 11:46 Stefan Roese
2017-02-01 21:33 ` Tom Rini
2017-02-17 11:15 Stefan Roese
2017-02-17 22:56 ` Tom Rini
2017-03-24 5:58 Stefan Roese
2017-03-24 17:36 ` Tom Rini
2017-03-29 9:24 Stefan Roese
2017-04-04 20:00 ` Tom Rini
2017-05-09 14:45 Stefan Roese
2017-05-09 23:49 ` Tom Rini
2017-05-31 9:02 Stefan Roese
2017-06-01 12:10 ` Tom Rini
2017-06-23 8:42 Stefan Roese
2017-06-23 13:22 ` Tom Rini
2017-07-12 6:00 Stefan Roese
2017-07-12 14:25 ` Tom Rini
2017-08-08 12:26 Stefan Roese
2017-08-09 15:26 ` Tom Rini
2017-08-10 8:26 Stefan Roese
2017-08-10 20:17 ` Tom Rini
2017-08-21 9:43 Stefan Roese
2017-08-22 20:53 ` Tom Rini
2017-08-30 8:06 Stefan Roese
2017-09-01 16:42 ` Tom Rini
2017-09-26 8:55 Stefan Roese
2017-09-27 2:45 ` Tom Rini
2017-11-16 13:09 Stefan Roese
2017-11-17 1:52 ` Tom Rini
2017-11-30 12:33 Stefan Roese
2017-11-30 18:45 ` Tom Rini
2018-01-10 11:40 Stefan Roese
2018-01-10 16:42 ` Tom Rini
2018-01-20 9:01 Stefan Roese
2018-01-20 16:58 ` Tom Rini
2018-01-29 12:42 Stefan Roese
2018-01-29 16:55 ` Tom Rini
2018-04-17 8:53 Stefan Roese
2018-04-17 19:39 ` Tom Rini
2018-05-14 11:58 Stefan Roese
2018-05-14 15:11 ` Tom Rini
2018-05-14 15:16 ` Stefan Roese
2018-05-15 1:23 ` Chris Packham
2018-05-16 12:05 Stefan Roese
2018-05-16 15:37 ` Tom Rini
2018-05-17 8:36 ` Chris Packham
2018-05-17 8:45 ` Chris Packham
2018-05-17 8:48 ` Stefan Roese
2018-05-17 9:06 ` Chris Packham
2018-06-05 9:33 Stefan Roese
2018-06-05 14:14 ` Tom Rini
2018-08-07 13:10 Stefan Roese
2018-08-08 1:35 ` Tom Rini
2018-09-19 15:12 Stefan Roese
2018-09-20 13:24 ` Tom Rini
2018-11-20 12:15 Stefan Roese
2018-11-20 21:48 ` Tom Rini
2018-11-30 14:45 Stefan Roese
2018-11-30 22:09 ` Tom Rini
2018-12-09 10:15 Stefan Roese
2018-12-09 21:44 ` Chris Packham
2018-12-09 22:11 ` Tom Rini
2018-12-21 15:31 Stefan Roese
2018-12-23 17:31 ` Tom Rini
2019-01-21 10:52 Stefan Roese
2019-01-22 2:29 ` Tom Rini
2019-02-05 13:36 Stefan Roese
2019-02-08 3:13 ` Tom Rini
2019-02-11 12:34 Stefan Roese
2019-02-11 22:41 ` Tom Rini
2019-03-19 12:49 Stefan Roese
2019-03-20 13:46 ` Tom Rini
2019-04-11 12:34 Stefan Roese
2019-04-11 14:49 ` Tom Rini
2019-04-11 14:51 ` Stefan Roese
2019-04-11 14:52 ` Tom Rini
2019-04-26 10:58 Stefan Roese
2019-04-27 14:48 ` Tom Rini
2019-05-03 11:49 Stefan Roese
2019-05-04 17:01 ` Tom Rini
2019-05-09 10:08 Stefan Roese
2019-05-09 22:25 ` Tom Rini
2019-05-20 7:59 Stefan Roese
2019-05-20 17:53 ` Tom Rini
2019-05-27 11:35 Stefan Roese
2019-05-27 18:35 ` Tom Rini
2019-06-04 6:39 Stefan Roese
2019-06-05 14:24 ` Tom Rini
2019-07-11 16:01 Stefan Roese
2019-07-12 13:32 ` Tom Rini
2019-08-12 12:08 Stefan Roese
2019-08-13 16:50 ` Tom Rini
2019-11-14 7:39 Stefan Roese
2019-11-18 2:14 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5697A274.1020103@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.