All of lore.kernel.org
 help / color / mirror / Atom feed
From: Santosh Shukla <sshukla@mvista.com>
To: dev@dpdk.org
Subject: [PATCH v6 4/8] virtio: Introduce config RTE_VIRTIO_INC_VECTOR
Date: Fri, 29 Jan 2016 23:51:53 +0530	[thread overview]
Message-ID: <1454091717-32251-4-git-send-email-sshukla@mvista.com> (raw)
In-Reply-To: <1454091717-32251-1-git-send-email-sshukla@mvista.com>

- virtio_recv_pkts_vec and other virtio vector friend apis are written for
  sse/avx instructions. For arm64 in particular, virtio vector implementation
  does not exist(todo).

So virtio pmd driver wont build for targets like i686, arm64.  By making
RTE_VIRTIO_INC_VECTOR=n, Driver can build for non-sse/avx targets and will work
in non-vectored virtio mode.

Disabling RTE_VIRTIO_INC_VECTOR config for :

- i686 arch as i686 target config says:
  config/defconfig_i686-native-linuxapp-gcc says "Vectorized PMD is not
  supported on 32-bit".

- armv7/v8 arch.

Signed-off-by: Santosh Shukla <sshukla@mvista.com>
---
v4--> v5:
- squashed v4's RTE_VIRTIO_INC_VECTOR patches into one patch.
- Added ifdefs RTE_xx_xx_INC_VECTOR across _simple_rx_tx flag occurance in code.


 config/common_linuxapp                     |    1 +
 config/defconfig_arm-armv7a-linuxapp-gcc   |    4 +++-
 config/defconfig_arm64-armv8a-linuxapp-gcc |    4 +++-
 config/defconfig_i686-native-linuxapp-gcc  |    1 +
 config/defconfig_i686-native-linuxapp-icc  |    1 +
 drivers/net/virtio/Makefile                |    2 +-
 drivers/net/virtio/virtio_rxtx.c           |   16 +++++++++++++++-
 drivers/net/virtio/virtio_rxtx.h           |    2 ++
 8 files changed, 27 insertions(+), 4 deletions(-)

diff --git a/config/common_linuxapp b/config/common_linuxapp
index 74bc515..8677697 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -274,6 +274,7 @@ CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
+CONFIG_RTE_VIRTIO_INC_VECTOR=y
 
 #
 # Compile burst-oriented VMXNET3 PMD driver
diff --git a/config/defconfig_arm-armv7a-linuxapp-gcc b/config/defconfig_arm-armv7a-linuxapp-gcc
index cbebd64..9f852ce 100644
--- a/config/defconfig_arm-armv7a-linuxapp-gcc
+++ b/config/defconfig_arm-armv7a-linuxapp-gcc
@@ -43,6 +43,9 @@ CONFIG_RTE_FORCE_INTRINSICS=y
 CONFIG_RTE_TOOLCHAIN="gcc"
 CONFIG_RTE_TOOLCHAIN_GCC=y
 
+# Disable VIRTIO VECTOR support
+CONFIG_RTE_VIRTIO_INC_VECTOR=n
+
 # ARM doesn't have support for vmware TSC map
 CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=n
 
@@ -70,7 +73,6 @@ CONFIG_RTE_LIBRTE_I40E_PMD=n
 CONFIG_RTE_LIBRTE_IXGBE_PMD=n
 CONFIG_RTE_LIBRTE_MLX4_PMD=n
 CONFIG_RTE_LIBRTE_MPIPE_PMD=n
-CONFIG_RTE_LIBRTE_VIRTIO_PMD=n
 CONFIG_RTE_LIBRTE_VMXNET3_PMD=n
 CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
 CONFIG_RTE_LIBRTE_PMD_BNX2X=n
diff --git a/config/defconfig_arm64-armv8a-linuxapp-gcc b/config/defconfig_arm64-armv8a-linuxapp-gcc
index 504f3ed..1a638b3 100644
--- a/config/defconfig_arm64-armv8a-linuxapp-gcc
+++ b/config/defconfig_arm64-armv8a-linuxapp-gcc
@@ -45,8 +45,10 @@ CONFIG_RTE_TOOLCHAIN_GCC=y
 
 CONFIG_RTE_CACHE_LINE_SIZE=64
 
+# Disable VIRTIO VECTOR support
+CONFIG_RTE_VIRTIO_INC_VECTOR=n
+
 CONFIG_RTE_IXGBE_INC_VECTOR=n
-CONFIG_RTE_LIBRTE_VIRTIO_PMD=n
 CONFIG_RTE_LIBRTE_IVSHMEM=n
 CONFIG_RTE_LIBRTE_FM10K_PMD=n
 CONFIG_RTE_LIBRTE_I40E_PMD=n
diff --git a/config/defconfig_i686-native-linuxapp-gcc b/config/defconfig_i686-native-linuxapp-gcc
index a90de9b..a4b1c49 100644
--- a/config/defconfig_i686-native-linuxapp-gcc
+++ b/config/defconfig_i686-native-linuxapp-gcc
@@ -49,3 +49,4 @@ CONFIG_RTE_LIBRTE_KNI=n
 # Vectorized PMD is not supported on 32-bit
 #
 CONFIG_RTE_IXGBE_INC_VECTOR=n
+CONFIG_RTE_VIRTIO_INC_VECTOR=n
diff --git a/config/defconfig_i686-native-linuxapp-icc b/config/defconfig_i686-native-linuxapp-icc
index c021321..f8eb6ad 100644
--- a/config/defconfig_i686-native-linuxapp-icc
+++ b/config/defconfig_i686-native-linuxapp-icc
@@ -49,3 +49,4 @@ CONFIG_RTE_LIBRTE_KNI=n
 # Vectorized PMD is not supported on 32-bit
 #
 CONFIG_RTE_IXGBE_INC_VECTOR=n
+CONFIG_RTE_VIRTIO_INC_VECTOR=n
diff --git a/drivers/net/virtio/Makefile b/drivers/net/virtio/Makefile
index 43835ba..25a842d 100644
--- a/drivers/net/virtio/Makefile
+++ b/drivers/net/virtio/Makefile
@@ -50,7 +50,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += virtqueue.c
 SRCS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += virtio_pci.c
 SRCS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += virtio_rxtx.c
 SRCS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += virtio_ethdev.c
-SRCS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += virtio_rxtx_simple.c
+SRCS-$(CONFIG_RTE_VIRTIO_INC_VECTOR) += virtio_rxtx_simple.c
 
 # this lib depends upon:
 DEPDIRS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += lib/librte_eal lib/librte_ether
diff --git a/drivers/net/virtio/virtio_rxtx.c b/drivers/net/virtio/virtio_rxtx.c
index 41a1366..d8169d1 100644
--- a/drivers/net/virtio/virtio_rxtx.c
+++ b/drivers/net/virtio/virtio_rxtx.c
@@ -67,7 +67,9 @@
 #define VIRTIO_SIMPLE_FLAGS ((uint32_t)ETH_TXQ_FLAGS_NOMULTSEGS | \
 	ETH_TXQ_FLAGS_NOOFFLOADS)
 
+#ifdef RTE_VIRTIO_INC_VECTOR
 static int use_simple_rxtx;
+#endif
 
 static void
 vq_ring_free_chain(struct virtqueue *vq, uint16_t desc_idx)
@@ -307,12 +309,13 @@ virtio_dev_vring_start(struct virtqueue *vq, int queue_type)
 		nbufs = 0;
 		error = ENOSPC;
 
+#ifdef RTE_VIRTIO_INC_VECTOR
 		if (use_simple_rxtx)
 			for (i = 0; i < vq->vq_nentries; i++) {
 				vq->vq_ring.avail->ring[i] = i;
 				vq->vq_ring.desc[i].flags = VRING_DESC_F_WRITE;
 			}
-
+#endif
 		memset(&vq->fake_mbuf, 0, sizeof(vq->fake_mbuf));
 		for (i = 0; i < RTE_PMD_VIRTIO_RX_MAX_BURST; i++)
 			vq->sw_ring[vq->vq_nentries + i] = &vq->fake_mbuf;
@@ -325,9 +328,11 @@ virtio_dev_vring_start(struct virtqueue *vq, int queue_type)
 			/******************************************
 			*         Enqueue allocated buffers        *
 			*******************************************/
+#ifdef RTE_VIRTIO_INC_VECTOR
 			if (use_simple_rxtx)
 				error = virtqueue_enqueue_recv_refill_simple(vq, m);
 			else
+#endif
 				error = virtqueue_enqueue_recv_refill(vq, m);
 			if (error) {
 				rte_pktmbuf_free(m);
@@ -340,6 +345,7 @@ virtio_dev_vring_start(struct virtqueue *vq, int queue_type)
 
 		PMD_INIT_LOG(DEBUG, "Allocated %d bufs", nbufs);
 	} else if (queue_type == VTNET_TQ) {
+#ifdef RTE_VIRTIO_INC_VECTOR
 		if (use_simple_rxtx) {
 			int mid_idx  = vq->vq_nentries >> 1;
 			for (i = 0; i < mid_idx; i++) {
@@ -357,6 +363,7 @@ virtio_dev_vring_start(struct virtqueue *vq, int queue_type)
 			for (i = mid_idx; i < vq->vq_nentries; i++)
 				vq->vq_ring.avail->ring[i] = i;
 		}
+#endif
 	}
 }
 
@@ -423,7 +430,9 @@ virtio_dev_rx_queue_setup(struct rte_eth_dev *dev,
 
 	dev->data->rx_queues[queue_idx] = vq;
 
+#ifdef RTE_VIRTIO_INC_VECTOR
 	virtio_rxq_vec_setup(vq);
+#endif
 
 	return 0;
 }
@@ -449,7 +458,10 @@ virtio_dev_tx_queue_setup(struct rte_eth_dev *dev,
 			const struct rte_eth_txconf *tx_conf)
 {
 	uint8_t vtpci_queue_idx = 2 * queue_idx + VTNET_SQ_TQ_QUEUE_IDX;
+
+#ifdef RTE_VIRTIO_INC_VECTOR
 	struct virtio_hw *hw = dev->data->dev_private;
+#endif
 	struct virtqueue *vq;
 	uint16_t tx_free_thresh;
 	int ret;
@@ -462,6 +474,7 @@ virtio_dev_tx_queue_setup(struct rte_eth_dev *dev,
 		return -EINVAL;
 	}
 
+#ifdef RTE_VIRTIO_INC_VECTOR
 	/* Use simple rx/tx func if single segment and no offloads */
 	if ((tx_conf->txq_flags & VIRTIO_SIMPLE_FLAGS) == VIRTIO_SIMPLE_FLAGS &&
 	     !vtpci_with_feature(hw, VIRTIO_NET_F_MRG_RXBUF)) {
@@ -470,6 +483,7 @@ virtio_dev_tx_queue_setup(struct rte_eth_dev *dev,
 		dev->rx_pkt_burst = virtio_recv_pkts_vec;
 		use_simple_rxtx = 1;
 	}
+#endif
 
 	ret = virtio_dev_queue_setup(dev, VTNET_TQ, queue_idx, vtpci_queue_idx,
 			nb_desc, socket_id, &vq);
diff --git a/drivers/net/virtio/virtio_rxtx.h b/drivers/net/virtio/virtio_rxtx.h
index 831e492..9be1378 100644
--- a/drivers/net/virtio/virtio_rxtx.h
+++ b/drivers/net/virtio/virtio_rxtx.h
@@ -33,7 +33,9 @@
 
 #define RTE_PMD_VIRTIO_RX_MAX_BURST 64
 
+#ifdef RTE_VIRTIO_INC_VECTOR
 int virtio_rxq_vec_setup(struct virtqueue *rxq);
 
 int virtqueue_enqueue_recv_refill_simple(struct virtqueue *vq,
 	struct rte_mbuf *m);
+#endif
-- 
1.7.9.5

  parent reply	other threads:[~2016-01-29 18:23 UTC|newest]

Thread overview: 85+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-04 18:31 [PATCH v2 0/8] rtc: enable adjustment of clock offset Joshua Clayton
2016-01-04 18:31 ` [rtc-linux] " Joshua Clayton
     [not found] ` <0000-cover-letter.patch>
2016-01-04 18:31   ` [PATCH v2 1/8] rtc-pcf2123: define registers and bit macros Joshua Clayton
2016-01-04 18:31     ` [rtc-linux] " Joshua Clayton
2016-01-04 18:31   ` [PATCH v2 2/8] rtc-pcf2123: clean up reads from the chip Joshua Clayton
2016-01-04 18:31     ` [rtc-linux] " Joshua Clayton
2016-01-04 18:31   ` [PATCH v2 3/8] rtc-pcf2123: clean up writes to the rtc chip Joshua Clayton
2016-01-04 18:31     ` [rtc-linux] " Joshua Clayton
2016-01-04 18:31   ` [PATCH v2 4/8] rtc-pcf2123: refactor chip reset into a function Joshua Clayton
2016-01-04 18:31     ` [rtc-linux] " Joshua Clayton
2016-01-04 18:31   ` [PATCH v2 5/8] rtc-pcf2123: avoid resetting the clock if possible Joshua Clayton
2016-01-04 18:31     ` [rtc-linux] " Joshua Clayton
2016-01-04 18:31   ` [PATCH v2 6/8] rtc: Add functions to set and read clock offset Joshua Clayton
2016-01-04 18:31     ` [rtc-linux] " Joshua Clayton
2016-01-04 18:31   ` [PATCH v2 7/8] rtc: implement a sysfs interface for " Joshua Clayton
2016-01-04 18:31     ` [rtc-linux] " Joshua Clayton
2016-01-31 11:41     ` Alexandre Belloni
2016-01-31 11:41       ` [rtc-linux] " Alexandre Belloni
2016-02-01 20:56       ` Joshua Clayton
2016-02-01 20:56         ` [rtc-linux] " Joshua Clayton
2016-02-02 10:41         ` Alexandre Belloni
2016-02-02 10:41           ` [rtc-linux] " Alexandre Belloni
2016-02-03 17:16           ` [PATCH v3 1/3] rtc: Add functions to set and read rtc offset Joshua Clayton
2016-02-03 17:16             ` [rtc-linux] " Joshua Clayton
2016-02-04 22:07             ` Alexandre Belloni
2016-02-04 22:07               ` [rtc-linux] " Alexandre Belloni
2016-02-04 23:32               ` Joshua Clayton
2016-02-04 23:32                 ` [rtc-linux] " Joshua Clayton
2016-02-05 14:39                 ` Alexandre Belloni
2016-02-05 14:39                   ` [rtc-linux] " Alexandre Belloni
2016-02-05 20:41                   ` [PATCH v4 " Joshua Clayton
2016-02-05 20:41                     ` [rtc-linux] " Joshua Clayton
2016-02-05 20:41                     ` [PATCH v4 2/3] rtc: implement a sysfs interface for clock offset Joshua Clayton
2016-02-05 20:41                       ` [rtc-linux] " Joshua Clayton
2016-02-05 20:41                     ` [PATCH v4 3/3] rtc-pcf2123: implement read_offset and set_offset Joshua Clayton
2016-02-05 20:41                       ` [rtc-linux] " Joshua Clayton
2016-02-23 18:47                     ` [PATCH v4 1/3] rtc: Add functions to set and read rtc offset Joshua Clayton
2016-02-23 18:47                       ` [rtc-linux] " Joshua Clayton
2016-02-23 21:44                       ` Alexandre Belloni
2016-02-23 21:44                         ` [rtc-linux] " Alexandre Belloni
2016-02-03 17:16           ` [PATCH v3 2/3] rtc: implement a sysfs interface for clock offset Joshua Clayton
2016-02-03 17:16             ` [rtc-linux] " Joshua Clayton
2016-02-04 22:12             ` Alexandre Belloni
2016-02-04 22:12               ` [rtc-linux] " Alexandre Belloni
2016-02-03 17:16           ` [PATCH v3 3/3] rtc-pcf2123: implement read_offset and set_offset Joshua Clayton
2016-02-03 17:16             ` [rtc-linux] " Joshua Clayton
2016-01-04 18:31   ` [PATCH v2 8/8] " Joshua Clayton
2016-01-04 18:31     ` [rtc-linux] " Joshua Clayton
2016-01-29 18:21   ` [PATCH v6 1/8] eal: pci: add api to rd/wr pci bar region Santosh Shukla
2016-01-29 18:21     ` [PATCH v6 2/8] linuxapp/vfio: ignore mapping for ioport region Santosh Shukla
2016-01-29 18:21     ` [PATCH v6 3/8] eal/linux: never check iopl for arm Santosh Shukla
2016-01-29 18:21     ` Santosh Shukla [this message]
2016-01-29 18:21     ` [PATCH v6 5/8] virtio: move io header and api from virtio_pci.h Santosh Shukla
2016-01-29 18:21     ` [PATCH v6 6/8] virtio: add vfio api to rd/wr ioport space Santosh Shukla
2016-02-01 12:48       ` Yuanhan Liu
2016-02-02  4:30         ` Santosh Shukla
2016-02-02  5:19           ` Yuanhan Liu
2016-02-02  6:02             ` Santosh Shukla
2016-01-29 18:21     ` [PATCH v6 7/8] virtio: extend pci rw api for vfio Santosh Shukla
2016-01-29 18:21     ` [PATCH v6 8/8] virtio: do not parse if interface is vfio Santosh Shukla
2016-02-01 13:48     ` [PATCH v6 1/8] eal: pci: add api to rd/wr pci bar region Yuanhan Liu
2016-02-02  4:14       ` Santosh Shukla
2016-02-02  5:43         ` Yuanhan Liu
2016-02-02  5:50           ` David Marchand
2016-02-02  8:49             ` Yuanhan Liu
2016-02-02 15:51               ` Santosh Shukla
2016-02-02 16:18                 ` Santosh Shukla
2016-02-03  9:50                   ` Santosh Shukla
2016-02-03 11:50                     ` Yuanhan Liu
2016-02-05 17:56                       ` David Marchand
2016-02-03 11:43                   ` Yuanhan Liu
2016-02-02  7:00           ` Santosh Shukla
2016-02-02  7:01             ` Santosh Shukla
2016-02-08 10:03   ` [PATCH v8 3/4] eal/linux: vfio: ignore mapping for ioport region Santosh Shukla
2016-02-08 10:03     ` [PATCH v8 4/4] eal/linux: vfio: add pci ioport support Santosh Shukla
2016-02-08 14:13       ` Burakov, Anatoly
2016-02-09  9:04         ` David Marchand
2016-02-18  5:25           ` Santosh Shukla
2016-02-18 14:00             ` Thomas Monjalon
2016-01-26 14:56 ` [PATCH v2 0/8] rtc: enable adjustment of clock offset Joshua Clayton
2016-01-26 14:56   ` [rtc-linux] " Joshua Clayton
2016-01-26 16:00   ` Alexandre Belloni
2016-01-26 16:00     ` [rtc-linux] " Alexandre Belloni
2016-01-31 11:29     ` Alexandre Belloni
2016-01-31 11:29       ` [rtc-linux] " Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1454091717-32251-4-git-send-email-sshukla@mvista.com \
    --to=sshukla@mvista.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.