All of lore.kernel.org
 help / color / mirror / Atom feed
From: Joshua Clayton <stillcompiling@gmail.com>
To: Alexandre Belloni <alexandre.belloni@free-electrons.com>,
	Alessandro Zummo <a.zummo@towertech.it>
Cc: rtc-linux@googlegroups.com, linux-kernel@vger.kernel.org,
	Joshua Clayton <stillcompiling@gmail.com>
Subject: [PATCH v2 3/8] rtc-pcf2123: clean up writes to the rtc chip
Date: Mon,  4 Jan 2016 10:31:21 -0800	[thread overview]
Message-ID: <82c777d8bdfba44a20358fb77e68a08f6dc55bab.1451929910.git.stillcompiling@gmail.com> (raw)
In-Reply-To: <cover.1451928661.git.stillcompiling@gmail.com>
In-Reply-To: <0000-cover-letter.patch>

Add new functions pcf2123_write(), and pcf2123_write_reg().
Use named defines for the values being written.

This improves modularity and readability, and reduces lines of code.

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
---
 drivers/rtc/rtc-pcf2123.c | 67 ++++++++++++++++++++++-------------------------
 1 file changed, 32 insertions(+), 35 deletions(-)

diff --git a/drivers/rtc/rtc-pcf2123.c b/drivers/rtc/rtc-pcf2123.c
index 4c4b3fc..0f2ce45 100644
--- a/drivers/rtc/rtc-pcf2123.c
+++ b/drivers/rtc/rtc-pcf2123.c
@@ -140,6 +140,27 @@ static int pcf2123_read(struct device *dev, u8 reg, u8 *rxbuf, size_t size)
 	return ret;
 }
 
+static int pcf2123_write(struct device *dev, u8 *txbuf, size_t size)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	int ret;
+
+	txbuf[0] |= PCF2123_WRITE;
+	ret = spi_write(spi, txbuf, size);
+	pcf2123_delay_trec();
+
+	return ret;
+}
+
+static int pcf2123_write_reg(struct device *dev, u8 reg, u8 val)
+{
+	u8 txbuf[2];
+
+	txbuf[0] = reg;
+	txbuf[1] = val;
+	return pcf2123_write(dev, txbuf, sizeof(txbuf));
+}
+
 static ssize_t pcf2123_show(struct device *dev, struct device_attribute *attr,
 			    char *buffer)
 {
@@ -163,9 +184,7 @@ static ssize_t pcf2123_show(struct device *dev, struct device_attribute *attr,
 
 static ssize_t pcf2123_store(struct device *dev, struct device_attribute *attr,
 			     const char *buffer, size_t count) {
-	struct spi_device *spi = to_spi_device(dev);
 	struct pcf2123_sysfs_reg *r;
-	u8 txbuf[2];
 	unsigned long reg;
 	unsigned long val;
 
@@ -181,12 +200,9 @@ static ssize_t pcf2123_store(struct device *dev, struct device_attribute *attr,
 	if (ret)
 		return ret;
 
-	txbuf[0] = PCF2123_WRITE | reg;
-	txbuf[1] = val;
-	ret = spi_write(spi, txbuf, sizeof(txbuf));
+	pcf2123_write_reg(dev, reg, val);
 	if (ret < 0)
 		return -EIO;
-	pcf2123_delay_trec();
 	return count;
 }
 
@@ -220,7 +236,6 @@ static int pcf2123_rtc_read_time(struct device *dev, struct rtc_time *tm)
 
 static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
-	struct spi_device *spi = to_spi_device(dev);
 	u8 txbuf[8];
 	int ret;
 
@@ -231,15 +246,12 @@ static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
 			tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
 
 	/* Stop the counter first */
-	txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
-	txbuf[1] = 0x20;
-	ret = spi_write(spi, txbuf, 2);
+	ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_STOP);
 	if (ret < 0)
 		return ret;
-	pcf2123_delay_trec();
 
 	/* Set the new time */
-	txbuf[0] = PCF2123_WRITE | PCF2123_REG_SC;
+	txbuf[0] = PCF2123_REG_SC;
 	txbuf[1] = bin2bcd(tm->tm_sec & 0x7F);
 	txbuf[2] = bin2bcd(tm->tm_min & 0x7F);
 	txbuf[3] = bin2bcd(tm->tm_hour & 0x3F);
@@ -248,18 +260,14 @@ static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	txbuf[6] = bin2bcd((tm->tm_mon + 1) & 0x1F); /* rtc mn 1-12 */
 	txbuf[7] = bin2bcd(tm->tm_year < 100 ? tm->tm_year : tm->tm_year - 100);
 
-	ret = spi_write(spi, txbuf, sizeof(txbuf));
+	ret = pcf2123_write(dev, txbuf, sizeof(txbuf));
 	if (ret < 0)
 		return ret;
-	pcf2123_delay_trec();
 
 	/* Start the counter */
-	txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
-	txbuf[1] = 0x00;
-	ret = spi_write(spi, txbuf, 2);
+	ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_CLEAR);
 	if (ret < 0)
 		return ret;
-	pcf2123_delay_trec();
 
 	return 0;
 }
@@ -273,7 +281,7 @@ static int pcf2123_probe(struct spi_device *spi)
 {
 	struct rtc_device *rtc;
 	struct pcf2123_plat_data *pdata;
-	u8 txbuf[2], rxbuf[2];
+	u8  rxbuf[2];
 	int ret, i;
 
 	pdata = devm_kzalloc(&spi->dev, sizeof(struct pcf2123_plat_data),
@@ -283,24 +291,16 @@ static int pcf2123_probe(struct spi_device *spi)
 	spi->dev.platform_data = pdata;
 
 	/* Send a software reset command */
-	txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
-	txbuf[1] = 0x58;
-	dev_dbg(&spi->dev, "resetting RTC (0x%02X 0x%02X)\n",
-			txbuf[0], txbuf[1]);
-	ret = spi_write(spi, txbuf, 2 * sizeof(u8));
+	dev_dbg(&spi->dev, "resetting RTC\n");
+	ret = pcf2123_write_reg(&spi->dev, PCF2123_REG_CTRL1, CTRL1_SW_RESET);
 	if (ret < 0)
 		goto kfree_exit;
-	pcf2123_delay_trec();
 
 	/* Stop the counter */
-	txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
-	txbuf[1] = 0x20;
-	dev_dbg(&spi->dev, "stopping RTC (0x%02X 0x%02X)\n",
-			txbuf[0], txbuf[1]);
-	ret = spi_write(spi, txbuf, 2 * sizeof(u8));
+	dev_dbg(&spi->dev, "stopping RTC\n");
+	ret = pcf2123_write_reg(&spi->dev, PCF2123_REG_CTRL1, CTRL1_STOP);
 	if (ret < 0)
 		goto kfree_exit;
-	pcf2123_delay_trec();
 
 	/* See if the counter was actually stopped */
 	dev_dbg(&spi->dev, "checking for presence of RTC\n");
@@ -321,12 +321,9 @@ static int pcf2123_probe(struct spi_device *spi)
 			(spi->max_speed_hz + 500) / 1000);
 
 	/* Start the counter */
-	txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
-	txbuf[1] = 0x00;
-	ret = spi_write(spi, txbuf, sizeof(txbuf));
+	ret = pcf2123_write_reg(&spi->dev, PCF2123_REG_CTRL1, CTRL1_CLEAR);
 	if (ret < 0)
 		goto kfree_exit;
-	pcf2123_delay_trec();
 
 	/* Finalize the initialization */
 	rtc = devm_rtc_device_register(&spi->dev, pcf2123_driver.driver.name,
-- 
2.5.0


WARNING: multiple messages have this Message-ID (diff)
From: Joshua Clayton <stillcompiling@gmail.com>
To: Alexandre Belloni <alexandre.belloni@free-electrons.com>,
	Alessandro Zummo <a.zummo@towertech.it>
Cc: rtc-linux@googlegroups.com, linux-kernel@vger.kernel.org,
	Joshua Clayton <stillcompiling@gmail.com>
Subject: [rtc-linux] [PATCH v2 3/8] rtc-pcf2123: clean up writes to the rtc chip
Date: Mon,  4 Jan 2016 10:31:21 -0800	[thread overview]
Message-ID: <82c777d8bdfba44a20358fb77e68a08f6dc55bab.1451929910.git.stillcompiling@gmail.com> (raw)
In-Reply-To: <cover.1451928661.git.stillcompiling@gmail.com>
In-Reply-To: <0000-cover-letter.patch>

Add new functions pcf2123_write(), and pcf2123_write_reg().
Use named defines for the values being written.

This improves modularity and readability, and reduces lines of code.

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
---
 drivers/rtc/rtc-pcf2123.c | 67 ++++++++++++++++++++++-------------------------
 1 file changed, 32 insertions(+), 35 deletions(-)

diff --git a/drivers/rtc/rtc-pcf2123.c b/drivers/rtc/rtc-pcf2123.c
index 4c4b3fc..0f2ce45 100644
--- a/drivers/rtc/rtc-pcf2123.c
+++ b/drivers/rtc/rtc-pcf2123.c
@@ -140,6 +140,27 @@ static int pcf2123_read(struct device *dev, u8 reg, u8 *rxbuf, size_t size)
 	return ret;
 }
 
+static int pcf2123_write(struct device *dev, u8 *txbuf, size_t size)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	int ret;
+
+	txbuf[0] |= PCF2123_WRITE;
+	ret = spi_write(spi, txbuf, size);
+	pcf2123_delay_trec();
+
+	return ret;
+}
+
+static int pcf2123_write_reg(struct device *dev, u8 reg, u8 val)
+{
+	u8 txbuf[2];
+
+	txbuf[0] = reg;
+	txbuf[1] = val;
+	return pcf2123_write(dev, txbuf, sizeof(txbuf));
+}
+
 static ssize_t pcf2123_show(struct device *dev, struct device_attribute *attr,
 			    char *buffer)
 {
@@ -163,9 +184,7 @@ static ssize_t pcf2123_show(struct device *dev, struct device_attribute *attr,
 
 static ssize_t pcf2123_store(struct device *dev, struct device_attribute *attr,
 			     const char *buffer, size_t count) {
-	struct spi_device *spi = to_spi_device(dev);
 	struct pcf2123_sysfs_reg *r;
-	u8 txbuf[2];
 	unsigned long reg;
 	unsigned long val;
 
@@ -181,12 +200,9 @@ static ssize_t pcf2123_store(struct device *dev, struct device_attribute *attr,
 	if (ret)
 		return ret;
 
-	txbuf[0] = PCF2123_WRITE | reg;
-	txbuf[1] = val;
-	ret = spi_write(spi, txbuf, sizeof(txbuf));
+	pcf2123_write_reg(dev, reg, val);
 	if (ret < 0)
 		return -EIO;
-	pcf2123_delay_trec();
 	return count;
 }
 
@@ -220,7 +236,6 @@ static int pcf2123_rtc_read_time(struct device *dev, struct rtc_time *tm)
 
 static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
-	struct spi_device *spi = to_spi_device(dev);
 	u8 txbuf[8];
 	int ret;
 
@@ -231,15 +246,12 @@ static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
 			tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
 
 	/* Stop the counter first */
-	txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
-	txbuf[1] = 0x20;
-	ret = spi_write(spi, txbuf, 2);
+	ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_STOP);
 	if (ret < 0)
 		return ret;
-	pcf2123_delay_trec();
 
 	/* Set the new time */
-	txbuf[0] = PCF2123_WRITE | PCF2123_REG_SC;
+	txbuf[0] = PCF2123_REG_SC;
 	txbuf[1] = bin2bcd(tm->tm_sec & 0x7F);
 	txbuf[2] = bin2bcd(tm->tm_min & 0x7F);
 	txbuf[3] = bin2bcd(tm->tm_hour & 0x3F);
@@ -248,18 +260,14 @@ static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	txbuf[6] = bin2bcd((tm->tm_mon + 1) & 0x1F); /* rtc mn 1-12 */
 	txbuf[7] = bin2bcd(tm->tm_year < 100 ? tm->tm_year : tm->tm_year - 100);
 
-	ret = spi_write(spi, txbuf, sizeof(txbuf));
+	ret = pcf2123_write(dev, txbuf, sizeof(txbuf));
 	if (ret < 0)
 		return ret;
-	pcf2123_delay_trec();
 
 	/* Start the counter */
-	txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
-	txbuf[1] = 0x00;
-	ret = spi_write(spi, txbuf, 2);
+	ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_CLEAR);
 	if (ret < 0)
 		return ret;
-	pcf2123_delay_trec();
 
 	return 0;
 }
@@ -273,7 +281,7 @@ static int pcf2123_probe(struct spi_device *spi)
 {
 	struct rtc_device *rtc;
 	struct pcf2123_plat_data *pdata;
-	u8 txbuf[2], rxbuf[2];
+	u8  rxbuf[2];
 	int ret, i;
 
 	pdata = devm_kzalloc(&spi->dev, sizeof(struct pcf2123_plat_data),
@@ -283,24 +291,16 @@ static int pcf2123_probe(struct spi_device *spi)
 	spi->dev.platform_data = pdata;
 
 	/* Send a software reset command */
-	txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
-	txbuf[1] = 0x58;
-	dev_dbg(&spi->dev, "resetting RTC (0x%02X 0x%02X)\n",
-			txbuf[0], txbuf[1]);
-	ret = spi_write(spi, txbuf, 2 * sizeof(u8));
+	dev_dbg(&spi->dev, "resetting RTC\n");
+	ret = pcf2123_write_reg(&spi->dev, PCF2123_REG_CTRL1, CTRL1_SW_RESET);
 	if (ret < 0)
 		goto kfree_exit;
-	pcf2123_delay_trec();
 
 	/* Stop the counter */
-	txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
-	txbuf[1] = 0x20;
-	dev_dbg(&spi->dev, "stopping RTC (0x%02X 0x%02X)\n",
-			txbuf[0], txbuf[1]);
-	ret = spi_write(spi, txbuf, 2 * sizeof(u8));
+	dev_dbg(&spi->dev, "stopping RTC\n");
+	ret = pcf2123_write_reg(&spi->dev, PCF2123_REG_CTRL1, CTRL1_STOP);
 	if (ret < 0)
 		goto kfree_exit;
-	pcf2123_delay_trec();
 
 	/* See if the counter was actually stopped */
 	dev_dbg(&spi->dev, "checking for presence of RTC\n");
@@ -321,12 +321,9 @@ static int pcf2123_probe(struct spi_device *spi)
 			(spi->max_speed_hz + 500) / 1000);
 
 	/* Start the counter */
-	txbuf[0] = PCF2123_WRITE | PCF2123_REG_CTRL1;
-	txbuf[1] = 0x00;
-	ret = spi_write(spi, txbuf, sizeof(txbuf));
+	ret = pcf2123_write_reg(&spi->dev, PCF2123_REG_CTRL1, CTRL1_CLEAR);
 	if (ret < 0)
 		goto kfree_exit;
-	pcf2123_delay_trec();
 
 	/* Finalize the initialization */
 	rtc = devm_rtc_device_register(&spi->dev, pcf2123_driver.driver.name,
-- 
2.5.0

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

  parent reply	other threads:[~2016-01-04 18:33 UTC|newest]

Thread overview: 85+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-04 18:31 [PATCH v2 0/8] rtc: enable adjustment of clock offset Joshua Clayton
2016-01-04 18:31 ` [rtc-linux] " Joshua Clayton
     [not found] ` <0000-cover-letter.patch>
2016-01-04 18:31   ` [PATCH v2 1/8] rtc-pcf2123: define registers and bit macros Joshua Clayton
2016-01-04 18:31     ` [rtc-linux] " Joshua Clayton
2016-01-04 18:31   ` [PATCH v2 2/8] rtc-pcf2123: clean up reads from the chip Joshua Clayton
2016-01-04 18:31     ` [rtc-linux] " Joshua Clayton
2016-01-04 18:31   ` Joshua Clayton [this message]
2016-01-04 18:31     ` [rtc-linux] [PATCH v2 3/8] rtc-pcf2123: clean up writes to the rtc chip Joshua Clayton
2016-01-04 18:31   ` [PATCH v2 4/8] rtc-pcf2123: refactor chip reset into a function Joshua Clayton
2016-01-04 18:31     ` [rtc-linux] " Joshua Clayton
2016-01-04 18:31   ` [PATCH v2 5/8] rtc-pcf2123: avoid resetting the clock if possible Joshua Clayton
2016-01-04 18:31     ` [rtc-linux] " Joshua Clayton
2016-01-04 18:31   ` [PATCH v2 6/8] rtc: Add functions to set and read clock offset Joshua Clayton
2016-01-04 18:31     ` [rtc-linux] " Joshua Clayton
2016-01-04 18:31   ` [PATCH v2 7/8] rtc: implement a sysfs interface for " Joshua Clayton
2016-01-04 18:31     ` [rtc-linux] " Joshua Clayton
2016-01-31 11:41     ` Alexandre Belloni
2016-01-31 11:41       ` [rtc-linux] " Alexandre Belloni
2016-02-01 20:56       ` Joshua Clayton
2016-02-01 20:56         ` [rtc-linux] " Joshua Clayton
2016-02-02 10:41         ` Alexandre Belloni
2016-02-02 10:41           ` [rtc-linux] " Alexandre Belloni
2016-02-03 17:16           ` [PATCH v3 1/3] rtc: Add functions to set and read rtc offset Joshua Clayton
2016-02-03 17:16             ` [rtc-linux] " Joshua Clayton
2016-02-04 22:07             ` Alexandre Belloni
2016-02-04 22:07               ` [rtc-linux] " Alexandre Belloni
2016-02-04 23:32               ` Joshua Clayton
2016-02-04 23:32                 ` [rtc-linux] " Joshua Clayton
2016-02-05 14:39                 ` Alexandre Belloni
2016-02-05 14:39                   ` [rtc-linux] " Alexandre Belloni
2016-02-05 20:41                   ` [PATCH v4 " Joshua Clayton
2016-02-05 20:41                     ` [rtc-linux] " Joshua Clayton
2016-02-05 20:41                     ` [PATCH v4 2/3] rtc: implement a sysfs interface for clock offset Joshua Clayton
2016-02-05 20:41                       ` [rtc-linux] " Joshua Clayton
2016-02-05 20:41                     ` [PATCH v4 3/3] rtc-pcf2123: implement read_offset and set_offset Joshua Clayton
2016-02-05 20:41                       ` [rtc-linux] " Joshua Clayton
2016-02-23 18:47                     ` [PATCH v4 1/3] rtc: Add functions to set and read rtc offset Joshua Clayton
2016-02-23 18:47                       ` [rtc-linux] " Joshua Clayton
2016-02-23 21:44                       ` Alexandre Belloni
2016-02-23 21:44                         ` [rtc-linux] " Alexandre Belloni
2016-02-03 17:16           ` [PATCH v3 2/3] rtc: implement a sysfs interface for clock offset Joshua Clayton
2016-02-03 17:16             ` [rtc-linux] " Joshua Clayton
2016-02-04 22:12             ` Alexandre Belloni
2016-02-04 22:12               ` [rtc-linux] " Alexandre Belloni
2016-02-03 17:16           ` [PATCH v3 3/3] rtc-pcf2123: implement read_offset and set_offset Joshua Clayton
2016-02-03 17:16             ` [rtc-linux] " Joshua Clayton
2016-01-04 18:31   ` [PATCH v2 8/8] " Joshua Clayton
2016-01-04 18:31     ` [rtc-linux] " Joshua Clayton
2016-01-29 18:21   ` [PATCH v6 1/8] eal: pci: add api to rd/wr pci bar region Santosh Shukla
2016-01-29 18:21     ` [PATCH v6 2/8] linuxapp/vfio: ignore mapping for ioport region Santosh Shukla
2016-01-29 18:21     ` [PATCH v6 3/8] eal/linux: never check iopl for arm Santosh Shukla
2016-01-29 18:21     ` [PATCH v6 4/8] virtio: Introduce config RTE_VIRTIO_INC_VECTOR Santosh Shukla
2016-01-29 18:21     ` [PATCH v6 5/8] virtio: move io header and api from virtio_pci.h Santosh Shukla
2016-01-29 18:21     ` [PATCH v6 6/8] virtio: add vfio api to rd/wr ioport space Santosh Shukla
2016-02-01 12:48       ` Yuanhan Liu
2016-02-02  4:30         ` Santosh Shukla
2016-02-02  5:19           ` Yuanhan Liu
2016-02-02  6:02             ` Santosh Shukla
2016-01-29 18:21     ` [PATCH v6 7/8] virtio: extend pci rw api for vfio Santosh Shukla
2016-01-29 18:21     ` [PATCH v6 8/8] virtio: do not parse if interface is vfio Santosh Shukla
2016-02-01 13:48     ` [PATCH v6 1/8] eal: pci: add api to rd/wr pci bar region Yuanhan Liu
2016-02-02  4:14       ` Santosh Shukla
2016-02-02  5:43         ` Yuanhan Liu
2016-02-02  5:50           ` David Marchand
2016-02-02  8:49             ` Yuanhan Liu
2016-02-02 15:51               ` Santosh Shukla
2016-02-02 16:18                 ` Santosh Shukla
2016-02-03  9:50                   ` Santosh Shukla
2016-02-03 11:50                     ` Yuanhan Liu
2016-02-05 17:56                       ` David Marchand
2016-02-03 11:43                   ` Yuanhan Liu
2016-02-02  7:00           ` Santosh Shukla
2016-02-02  7:01             ` Santosh Shukla
2016-02-08 10:03   ` [PATCH v8 3/4] eal/linux: vfio: ignore mapping for ioport region Santosh Shukla
2016-02-08 10:03     ` [PATCH v8 4/4] eal/linux: vfio: add pci ioport support Santosh Shukla
2016-02-08 14:13       ` Burakov, Anatoly
2016-02-09  9:04         ` David Marchand
2016-02-18  5:25           ` Santosh Shukla
2016-02-18 14:00             ` Thomas Monjalon
2016-01-26 14:56 ` [PATCH v2 0/8] rtc: enable adjustment of clock offset Joshua Clayton
2016-01-26 14:56   ` [rtc-linux] " Joshua Clayton
2016-01-26 16:00   ` Alexandre Belloni
2016-01-26 16:00     ` [rtc-linux] " Alexandre Belloni
2016-01-31 11:29     ` Alexandre Belloni
2016-01-31 11:29       ` [rtc-linux] " Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=82c777d8bdfba44a20358fb77e68a08f6dc55bab.1451929910.git.stillcompiling@gmail.com \
    --to=stillcompiling@gmail.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@free-electrons.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rtc-linux@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.