All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Kukjin Kim <kgene@kernel.org>,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>,
	Sylwester Nawrocki <s.nawrocki@samsung.com>,
	Tomasz Figa <tomasz.figa@gmail.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org
Cc: Javier Martinez Canillas <javier@osg.samsung.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH v5 20/22] ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi
Date: Sat, 28 May 2016 11:54:31 +0200	[thread overview]
Message-ID: <1464429273-23457-21-git-send-email-krzk@kernel.org> (raw)
In-Reply-To: <1464429273-23457-1-git-send-email-krzk@kernel.org>

The USI/HSI2C nodes can be mostly shared between Exynos5420 and
Exynos5410 so move them to common DTSI.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

Change since v4:
1. Remove the nodes in exynos5420.dtsi (before they were actually just
   copied instead of moving).
2. Use lower-case for hex.
---
 arch/arm/boot/dts/exynos5420.dtsi | 85 +++++++++++++--------------------------
 arch/arm/boot/dts/exynos54xx.dtsi | 41 +++++++++++++++++++
 2 files changed, 69 insertions(+), 57 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 8fa65eb8027d..8b1e706e9250 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -29,10 +29,6 @@
 		pinctrl2 = &pinctrl_2;
 		pinctrl3 = &pinctrl_3;
 		pinctrl4 = &pinctrl_4;
-		i2c4 = &hsi2c_4;
-		i2c5 = &hsi2c_5;
-		i2c6 = &hsi2c_6;
-		i2c7 = &hsi2c_7;
 		i2c8 = &hsi2c_8;
 		i2c9 = &hsi2c_9;
 		i2c10 = &hsi2c_10;
@@ -526,59 +522,6 @@
 			status = "disabled";
 		};
 
-		/* i2c_0-3 are defined in exynos5.dtsi */
-		hsi2c_4: i2c@12CA0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12CA0000 0x1000>;
-			interrupts = <0 60 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c4_hs_bus>;
-			clocks = <&clock CLK_USI0>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_5: i2c@12CB0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12CB0000 0x1000>;
-			interrupts = <0 61 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c5_hs_bus>;
-			clocks = <&clock CLK_USI1>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_6: i2c@12CC0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12CC0000 0x1000>;
-			interrupts = <0 62 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c6_hs_bus>;
-			clocks = <&clock CLK_USI2>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_7: i2c@12CD0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12CD0000 0x1000>;
-			interrupts = <0 63 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c7_hs_bus>;
-			clocks = <&clock CLK_USI3>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
 		hsi2c_8: i2c@12E00000 {
 			compatible = "samsung,exynos5250-hsi2c";
 			reg = <0x12E00000 0x1000>;
@@ -1022,6 +965,34 @@
 	pinctrl-0 = <&i2c3_bus>;
 };
 
+&hsi2c_4 {
+	clocks = <&clock CLK_USI0>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_hs_bus>;
+};
+
+&hsi2c_5 {
+	clocks = <&clock CLK_USI1>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_hs_bus>;
+};
+
+&hsi2c_6 {
+	clocks = <&clock CLK_USI2>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_hs_bus>;
+};
+
+&hsi2c_7 {
+	clocks = <&clock CLK_USI3>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_hs_bus>;
+};
+
 &mct {
 	clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 	clock-names = "fin_pll", "mct";
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index e01d068d4c38..44a8391c8524 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -21,6 +21,10 @@
 	compatible = "samsung,exynos5";
 
 	aliases {
+		i2c4 = &hsi2c_4;
+		i2c5 = &hsi2c_5;
+		i2c6 = &hsi2c_6;
+		i2c7 = &hsi2c_7;
 		usbdrdphy0 = &usbdrd_phy0;
 		usbdrdphy1 = &usbdrd_phy1;
 	};
@@ -70,6 +74,43 @@
 			};
 		};
 
+		/* i2c_0-3 are defined in exynos5.dtsi */
+		hsi2c_4: i2c@12ca0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12ca0000 0x1000>;
+			interrupts = <0 60 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_5: i2c@12cb0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cb0000 0x1000>;
+			interrupts = <0 61 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_6: i2c@12cc0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cc0000 0x1000>;
+			interrupts = <0 62 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_7: i2c@12cd0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cd0000 0x1000>;
+			interrupts = <0 63 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		usbdrd3_0: usb3-0 {
 			compatible = "samsung,exynos5250-dwusb3";
 			#address-cells = <1>;
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: krzk@kernel.org (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 20/22] ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi
Date: Sat, 28 May 2016 11:54:31 +0200	[thread overview]
Message-ID: <1464429273-23457-21-git-send-email-krzk@kernel.org> (raw)
In-Reply-To: <1464429273-23457-1-git-send-email-krzk@kernel.org>

The USI/HSI2C nodes can be mostly shared between Exynos5420 and
Exynos5410 so move them to common DTSI.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

Change since v4:
1. Remove the nodes in exynos5420.dtsi (before they were actually just
   copied instead of moving).
2. Use lower-case for hex.
---
 arch/arm/boot/dts/exynos5420.dtsi | 85 +++++++++++++--------------------------
 arch/arm/boot/dts/exynos54xx.dtsi | 41 +++++++++++++++++++
 2 files changed, 69 insertions(+), 57 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 8fa65eb8027d..8b1e706e9250 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -29,10 +29,6 @@
 		pinctrl2 = &pinctrl_2;
 		pinctrl3 = &pinctrl_3;
 		pinctrl4 = &pinctrl_4;
-		i2c4 = &hsi2c_4;
-		i2c5 = &hsi2c_5;
-		i2c6 = &hsi2c_6;
-		i2c7 = &hsi2c_7;
 		i2c8 = &hsi2c_8;
 		i2c9 = &hsi2c_9;
 		i2c10 = &hsi2c_10;
@@ -526,59 +522,6 @@
 			status = "disabled";
 		};
 
-		/* i2c_0-3 are defined in exynos5.dtsi */
-		hsi2c_4: i2c at 12CA0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12CA0000 0x1000>;
-			interrupts = <0 60 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c4_hs_bus>;
-			clocks = <&clock CLK_USI0>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_5: i2c at 12CB0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12CB0000 0x1000>;
-			interrupts = <0 61 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c5_hs_bus>;
-			clocks = <&clock CLK_USI1>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_6: i2c at 12CC0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12CC0000 0x1000>;
-			interrupts = <0 62 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c6_hs_bus>;
-			clocks = <&clock CLK_USI2>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_7: i2c at 12CD0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12CD0000 0x1000>;
-			interrupts = <0 63 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c7_hs_bus>;
-			clocks = <&clock CLK_USI3>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
 		hsi2c_8: i2c at 12E00000 {
 			compatible = "samsung,exynos5250-hsi2c";
 			reg = <0x12E00000 0x1000>;
@@ -1022,6 +965,34 @@
 	pinctrl-0 = <&i2c3_bus>;
 };
 
+&hsi2c_4 {
+	clocks = <&clock CLK_USI0>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_hs_bus>;
+};
+
+&hsi2c_5 {
+	clocks = <&clock CLK_USI1>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_hs_bus>;
+};
+
+&hsi2c_6 {
+	clocks = <&clock CLK_USI2>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_hs_bus>;
+};
+
+&hsi2c_7 {
+	clocks = <&clock CLK_USI3>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_hs_bus>;
+};
+
 &mct {
 	clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 	clock-names = "fin_pll", "mct";
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index e01d068d4c38..44a8391c8524 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -21,6 +21,10 @@
 	compatible = "samsung,exynos5";
 
 	aliases {
+		i2c4 = &hsi2c_4;
+		i2c5 = &hsi2c_5;
+		i2c6 = &hsi2c_6;
+		i2c7 = &hsi2c_7;
 		usbdrdphy0 = &usbdrd_phy0;
 		usbdrdphy1 = &usbdrd_phy1;
 	};
@@ -70,6 +74,43 @@
 			};
 		};
 
+		/* i2c_0-3 are defined in exynos5.dtsi */
+		hsi2c_4: i2c at 12ca0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12ca0000 0x1000>;
+			interrupts = <0 60 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_5: i2c at 12cb0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cb0000 0x1000>;
+			interrupts = <0 61 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_6: i2c at 12cc0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cc0000 0x1000>;
+			interrupts = <0 62 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_7: i2c at 12cd0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cd0000 0x1000>;
+			interrupts = <0 63 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		usbdrd3_0: usb3-0 {
 			compatible = "samsung,exynos5250-dwusb3";
 			#address-cells = <1>;
-- 
2.7.4

  parent reply	other threads:[~2016-05-28  9:56 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-28  9:54 [PATCH v5 00/22] ARM: dts: exynos: Add initial support for Odroid XU Krzysztof Kozlowski
2016-05-28  9:54 ` Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 01/22] dt-bindings: clock: Add license and reformat Exynos5410 clock IDs Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 02/22] dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410 Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 03/22] clk: samsung: exynos5410: Add serial3, USB and PWM clocks Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 04/22] ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl nodes Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 05/22] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 06/22] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 07/22] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 08/22] ARM: dts: exynos: Move common nodes to exynos5.dtsi Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 09/22] ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 10/22] ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 11/22] ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 12/22] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 13/22] ARM: dts: exynos: Enable UART3 on Exynos5410 Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-06-01 19:57   ` Kevin Hilman
2016-06-01 19:57     ` Kevin Hilman
2016-06-01 20:06     ` Krzysztof Kozlowski
2016-06-01 20:06       ` Krzysztof Kozlowski
2016-06-01 20:52       ` Javier Martinez Canillas
2016-06-01 20:52         ` Javier Martinez Canillas
2016-06-01 20:54         ` Javier Martinez Canillas
2016-06-01 20:54           ` Javier Martinez Canillas
2016-06-02  4:17           ` Krzysztof Kozlowski
2016-06-02  4:17             ` Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 14/22] ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 15/22] ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 16/22] ARM: dts: exynos: Add USB to Exynos5410 Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 17/22] ARM: dts: exynos: Add initial support for Odroid XU board Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 18/22] dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410 Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 19/22] clk: samsung: exynos5410: Add I2C, HSI2C and RTC clocks Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-06-01 22:15   ` Stephen Boyd
2016-06-01 22:15     ` Stephen Boyd
2016-05-28  9:54 ` Krzysztof Kozlowski [this message]
2016-05-28  9:54   ` [PATCH v5 20/22] ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 21/22] ARM: dts: exynos: Add I2C, PWM and UART pinctrl to Exynos5410 Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-05-28  9:54 ` [PATCH v5 22/22] ARM: dts: exynos: Add RTC and I2C " Krzysztof Kozlowski
2016-05-28  9:54   ` Krzysztof Kozlowski
2016-05-30 15:27 ` [PATCH v5 00/22] ARM: dts: exynos: Add initial support for Odroid XU Sylwester Nawrocki
2016-05-30 15:27   ` Sylwester Nawrocki
2016-05-31  9:12   ` Krzysztof Kozlowski
2016-05-31  9:12     ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1464429273-23457-21-git-send-email-krzk@kernel.org \
    --to=krzk@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=javier@osg.samsung.com \
    --cc=k.kozlowski@samsung.com \
    --cc=kgene@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=s.nawrocki@samsung.com \
    --cc=sboyd@codeaurora.org \
    --cc=tomasz.figa@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.