From: Tony Lindgren <tony@atomide.com> To: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Sricharan R <r.sricharan@ti.com>, Ming Lei <tom.leiming@gmail.com>, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Mike Turquette <mturquette@linaro.org> Subject: Re: [PATCH 2/6] ARM: OMAP2+: Remove board-omap4panda.c Date: Wed, 19 Jun 2013 02:58:37 -0700 [thread overview] Message-ID: <20130619095837.GY5523@atomide.com> (raw) In-Reply-To: <8761xaqvrn.fsf@lebrac.rtp-net.org> * Arnaud Patard <arnaud.patard@rtp-net.org> [130619 02:52]: > Tony Lindgren <tony@atomide.com> writes: > > Hi, > > > * Tony Lindgren <tony@atomide.com> [130617 03:32]: > >> * Arnaud Patard <arnaud.patard@rtp-net.org> [130617 02:52]: > >> > Tony Lindgren <tony@atomide.com> writes: > >> > > >> > I understand your concerns but, please, cope with reality: the clock > >> > work is not in -next so this tends to make me think it won't reach > >> > 3.11. We're at -rc6 after all. Telling users that their system doesn't > >> > have any network because it was easier to maintain, is not something > >> > they will understand imho. > >> > >> Right, like I said: the idea is to have it usable with DT. And USB and > >> Ethernet certainly are part of what I call usable. So is MMC, WLAN and > >> DSS. I've certainly spent quite a bit of time on making sure panda works > >> with DT, and I can assure you that fixing the USB extclock is easier than > >> supporting the legacy boot with DT :) > >> > >> This issue can also be fixed with a clock alias if we don't have DT > >> defined clocks ready for v3.11. It may take a few days for us to have > >> the solution. But get getting a clock to a driver certainly is not a > >> showstopper here. After all, that's what all drivers already do. > > > > Care to test the last patch just posted by Roger in thread > > " [PATCH 0/4] ARM: OMAP4: Panda USB Host support and DVI EDID fix"? > > I tried to test them but they don't apply on linux-next due to some > pinctrl changes probably missing: > Error: arch/arm/boot/dts/omap4-panda-common.dtsi:177.14-15 syntax error > > which corresponds to : > 0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4) Oops, right, that's in Benoit's branch too for the .dts preprocessing. Until it is merged, maybe try with Roger's earlier version of that patch that did not yet use the macros? > Also, the patch 3 (ARM: dts: omap5-uevm: Provide USB Host PHY clock) > doesn't apply as the omap5-uevm.dts doesn't exist. OK that's in Benoit's branch. But you won't need that one. > Which tree should I use to test the patches if it's not linux-next ? > > Also, you might want to know that drivers/usb/musb/omap2430.c doesn't > build due to some typos (musb_resources vs musb_resouces). Thanks, I think Felipe is already aware of that. Regards, Tony
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/6] ARM: OMAP2+: Remove board-omap4panda.c Date: Wed, 19 Jun 2013 02:58:37 -0700 [thread overview] Message-ID: <20130619095837.GY5523@atomide.com> (raw) In-Reply-To: <8761xaqvrn.fsf@lebrac.rtp-net.org> * Arnaud Patard <arnaud.patard@rtp-net.org> [130619 02:52]: > Tony Lindgren <tony@atomide.com> writes: > > Hi, > > > * Tony Lindgren <tony@atomide.com> [130617 03:32]: > >> * Arnaud Patard <arnaud.patard@rtp-net.org> [130617 02:52]: > >> > Tony Lindgren <tony@atomide.com> writes: > >> > > >> > I understand your concerns but, please, cope with reality: the clock > >> > work is not in -next so this tends to make me think it won't reach > >> > 3.11. We're at -rc6 after all. Telling users that their system doesn't > >> > have any network because it was easier to maintain, is not something > >> > they will understand imho. > >> > >> Right, like I said: the idea is to have it usable with DT. And USB and > >> Ethernet certainly are part of what I call usable. So is MMC, WLAN and > >> DSS. I've certainly spent quite a bit of time on making sure panda works > >> with DT, and I can assure you that fixing the USB extclock is easier than > >> supporting the legacy boot with DT :) > >> > >> This issue can also be fixed with a clock alias if we don't have DT > >> defined clocks ready for v3.11. It may take a few days for us to have > >> the solution. But get getting a clock to a driver certainly is not a > >> showstopper here. After all, that's what all drivers already do. > > > > Care to test the last patch just posted by Roger in thread > > " [PATCH 0/4] ARM: OMAP4: Panda USB Host support and DVI EDID fix"? > > I tried to test them but they don't apply on linux-next due to some > pinctrl changes probably missing: > Error: arch/arm/boot/dts/omap4-panda-common.dtsi:177.14-15 syntax error > > which corresponds to : > 0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4) Oops, right, that's in Benoit's branch too for the .dts preprocessing. Until it is merged, maybe try with Roger's earlier version of that patch that did not yet use the macros? > Also, the patch 3 (ARM: dts: omap5-uevm: Provide USB Host PHY clock) > doesn't apply as the omap5-uevm.dts doesn't exist. OK that's in Benoit's branch. But you won't need that one. > Which tree should I use to test the patches if it's not linux-next ? > > Also, you might want to know that drivers/usb/musb/omap2430.c doesn't > build due to some typos (musb_resources vs musb_resouces). Thanks, I think Felipe is already aware of that. Regards, Tony
next prev parent reply other threads:[~2013-06-19 9:58 UTC|newest] Thread overview: 100+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-05-17 19:17 [PATCH 0/6] Drop legacy booting for omap4 for v3.11, boot with device tree only Tony Lindgren 2013-05-17 19:17 ` Tony Lindgren 2013-05-17 19:17 ` [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c Tony Lindgren 2013-05-17 19:17 ` Tony Lindgren 2013-05-20 9:54 ` Russell King - ARM Linux 2013-05-20 9:54 ` Russell King - ARM Linux 2013-05-20 17:10 ` Tony Lindgren 2013-05-20 17:10 ` Tony Lindgren 2013-07-06 13:10 ` Russell King - ARM Linux 2013-07-06 13:10 ` Russell King - ARM Linux 2013-07-06 13:36 ` Russell King - ARM Linux 2013-07-06 13:36 ` Russell King - ARM Linux 2013-07-08 9:34 ` Tony Lindgren 2013-07-08 9:34 ` Tony Lindgren 2013-07-08 14:21 ` Russell King - ARM Linux 2013-07-08 14:21 ` Russell King - ARM Linux 2013-07-09 8:23 ` Tony Lindgren 2013-07-09 8:23 ` Tony Lindgren 2013-07-12 9:09 ` Peter Ujfalusi 2013-07-12 9:09 ` Peter Ujfalusi 2013-07-22 9:40 ` Tomi Valkeinen 2013-07-22 9:40 ` Tomi Valkeinen 2013-10-27 13:26 ` Javier Martinez Canillas 2013-10-27 13:26 ` Javier Martinez Canillas 2013-10-28 13:32 ` Tomi Valkeinen 2013-10-28 13:32 ` Tomi Valkeinen 2013-10-28 14:25 ` Javier Martinez Canillas 2013-10-28 14:25 ` Javier Martinez Canillas 2013-07-13 2:31 ` Olof Johansson 2013-07-13 2:31 ` Olof Johansson 2013-07-13 3:10 ` Olof Johansson 2013-07-13 3:10 ` Olof Johansson 2013-07-15 6:55 ` Tony Lindgren 2013-07-15 6:55 ` Tony Lindgren 2013-07-06 21:36 ` Arnd Bergmann 2013-07-06 21:36 ` Arnd Bergmann 2013-07-06 23:37 ` debugging options (was: Re: [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c) Russell King - ARM Linux 2013-07-06 23:37 ` Russell King - ARM Linux 2013-05-17 19:17 ` [PATCH 2/6] ARM: OMAP2+: Remove board-omap4panda.c Tony Lindgren 2013-05-17 19:17 ` Tony Lindgren 2013-06-03 15:28 ` Ming Lei 2013-06-03 15:28 ` Ming Lei 2013-06-12 16:31 ` Tony Lindgren 2013-06-12 16:31 ` Tony Lindgren 2013-06-12 17:14 ` Tony Lindgren 2013-06-12 17:14 ` Tony Lindgren 2013-06-13 9:21 ` Sricharan R 2013-06-13 9:21 ` Sricharan R 2013-06-13 10:12 ` Sricharan R 2013-06-13 10:12 ` Sricharan R 2013-06-13 11:05 ` Tony Lindgren 2013-06-13 11:05 ` Tony Lindgren 2013-06-13 13:36 ` Ming Lei 2013-06-13 13:36 ` Ming Lei 2013-06-14 13:31 ` Ming Lei 2013-06-14 13:31 ` Ming Lei 2013-06-14 13:58 ` Ming Lei 2013-06-14 13:58 ` Ming Lei 2013-06-17 7:42 ` Sricharan R 2013-06-17 7:42 ` Sricharan R 2013-06-17 8:06 ` Arnaud Patard 2013-06-17 8:06 ` Arnaud Patard (Rtp) 2013-06-17 8:16 ` Ming Lei 2013-06-17 8:16 ` Ming Lei 2013-06-17 8:27 ` Tony Lindgren 2013-06-17 8:27 ` Tony Lindgren 2013-06-17 8:41 ` Ming Lei 2013-06-17 8:41 ` Ming Lei 2013-06-17 8:49 ` Tony Lindgren 2013-06-17 8:49 ` Tony Lindgren 2013-06-17 8:24 ` Tony Lindgren 2013-06-17 8:24 ` Tony Lindgren 2013-06-17 9:46 ` Arnaud Patard 2013-06-17 9:46 ` Arnaud Patard (Rtp) 2013-06-17 10:26 ` Tony Lindgren 2013-06-17 10:26 ` Tony Lindgren 2013-06-18 11:27 ` Tony Lindgren 2013-06-18 11:27 ` Tony Lindgren 2013-06-19 9:45 ` Arnaud Patard 2013-06-19 9:45 ` Arnaud Patard (Rtp) 2013-06-19 9:58 ` Tony Lindgren [this message] 2013-06-19 9:58 ` Tony Lindgren 2013-06-20 7:29 ` Arnaud Patard 2013-06-20 7:29 ` Arnaud Patard (Rtp) 2013-06-21 6:01 ` Tony Lindgren 2013-06-21 6:01 ` Tony Lindgren 2013-05-17 19:17 ` [PATCH 3/6] ARM: OMAP2+: Remove legacy mux data for omap4 Tony Lindgren 2013-05-17 19:17 ` Tony Lindgren 2013-05-17 19:17 ` [PATCH 4/6] ARM: OMAP2+: Remove omap4 pdata from hsmmc.c Tony Lindgren 2013-05-17 19:17 ` Tony Lindgren 2013-05-17 19:18 ` [PATCH 5/6] ARM: OMAP2+: Remove omap4 pdata for USB Tony Lindgren 2013-05-17 19:18 ` Tony Lindgren 2013-05-17 19:18 ` [PATCH 6/6] ARM: OMAP2+: Remove omap4 ocp2scp pdata Tony Lindgren 2013-05-17 19:18 ` Tony Lindgren 2013-05-17 20:05 ` Felipe Balbi 2013-05-17 20:05 ` Felipe Balbi 2013-05-21 11:53 ` Kishon Vijay Abraham I 2013-05-21 11:53 ` Kishon Vijay Abraham I 2013-06-07 10:05 ` [PATCH 0/6] Drop legacy booting for omap4 for v3.11, boot with device tree only Tomi Valkeinen 2013-06-07 10:05 ` Tomi Valkeinen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20130619095837.GY5523@atomide.com \ --to=tony@atomide.com \ --cc=arnaud.patard@rtp-net.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=mturquette@linaro.org \ --cc=r.sricharan@ti.com \ --cc=tom.leiming@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.