From: Fredrik Noring <noring@nocrew.org>
To: "Jürgen Urban" <JuergenUrban@gmx.de>
Cc: "Maciej W. Rozycki" <macro@mips.com>, linux-mips@linux-mips.org
Subject: [RFC] MIPS: R5900: Workaround where MSB must be 0 for the instruction cache
Date: Sun, 18 Feb 2018 10:26:46 +0100 [thread overview]
Message-ID: <20180218092645.GB2577@localhost.localdomain> (raw)
In-Reply-To: <alpine.DEB.2.00.1801312259410.4191@tp.orcam.me.uk>
Hi Jürgen,
Would you know if this R5900 bug is documented in Sony's Linux Toolkit
Restriction manual or in the TX79 manual?
Fredrik
diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h
index 2c905dbe6464..4a4f552f6885 100644
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -28,7 +28,12 @@
* - We need a properly sign extended address for 64-bit code. To get away
* without ifdefs we let the compiler do it by a type cast.
*/
+#ifdef CONFIG_CPU_R5900
+/* CPU has a bug MSB must be 0 for instruction cache. */
+#define INDEX_BASE 0
+#else
#define INDEX_BASE CKSEG0
+#endif
#define cache_op_s(op,addr) \
__asm__ __volatile__( \
next prev parent reply other threads:[~2018-02-18 9:27 UTC|newest]
Thread overview: 117+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-27 13:23 [PATCH] MIPS: Add basic R5900 support Fredrik Noring
2017-08-28 13:53 ` Ralf Baechle
2017-08-28 17:11 ` Maciej W. Rozycki
2017-08-29 17:33 ` Fredrik Noring
2017-08-29 17:24 ` Maciej W. Rozycki
2017-08-29 17:24 ` Maciej W. Rozycki
2017-08-30 13:23 ` Fredrik Noring
2017-08-31 15:11 ` Maciej W. Rozycki
2017-08-31 15:11 ` Maciej W. Rozycki
2017-09-02 10:28 ` Fredrik Noring
2017-09-09 10:13 ` Maciej W. Rozycki
2017-09-09 10:13 ` Maciej W. Rozycki
2017-09-11 5:21 ` Maciej W. Rozycki
2017-09-11 5:21 ` Maciej W. Rozycki
2017-09-12 17:59 ` Fredrik Noring
2017-09-15 11:12 ` Maciej W. Rozycki
2017-09-15 11:12 ` Maciej W. Rozycki
2017-09-15 13:19 ` Fredrik Noring
2017-09-15 18:28 ` Maciej W. Rozycki
2017-09-15 18:28 ` Maciej W. Rozycki
2017-09-02 14:10 ` [PATCH v2] " Fredrik Noring
2017-09-11 5:18 ` Maciej W. Rozycki
2017-09-11 5:18 ` Maciej W. Rozycki
2017-09-11 15:17 ` Fredrik Noring
2017-09-14 13:50 ` Maciej W. Rozycki
2017-09-14 13:50 ` Maciej W. Rozycki
2017-09-16 13:34 ` Fredrik Noring
2017-09-18 17:05 ` Maciej W. Rozycki
2017-09-18 17:05 ` Maciej W. Rozycki
2017-09-18 19:24 ` Fredrik Noring
2017-09-19 12:44 ` Maciej W. Rozycki
2017-09-19 12:44 ` Maciej W. Rozycki
2017-09-20 14:54 ` Fredrik Noring
2017-09-26 11:50 ` Maciej W. Rozycki
2017-09-26 11:50 ` Maciej W. Rozycki
2017-09-27 17:21 ` Fredrik Noring
2017-09-28 12:13 ` Maciej W. Rozycki
2017-09-28 12:13 ` Maciej W. Rozycki
2017-09-30 6:56 ` Fredrik Noring
2017-10-02 9:05 ` Maciej W. Rozycki
2017-10-02 9:05 ` Maciej W. Rozycki
2017-10-02 16:33 ` Fredrik Noring
2017-10-29 17:20 ` Fredrik Noring
2017-11-10 23:34 ` Maciej W. Rozycki
2017-11-10 23:34 ` Maciej W. Rozycki
2017-11-11 16:04 ` Fredrik Noring
2018-01-29 20:27 ` Fredrik Noring
2018-01-31 23:01 ` Maciej W. Rozycki
2018-02-11 7:29 ` [RFC] MIPS: R5900: Workaround for the short loop bug Fredrik Noring
2018-02-12 9:25 ` Maciej W. Rozycki
2018-02-12 15:22 ` Fredrik Noring
2018-02-11 7:46 ` [RFC] MIPS: R5900: Use SYNC.L for data cache and SYNC.P for instruction cache Fredrik Noring
2018-02-11 7:56 ` [RFC] MIPS: R5900: Workaround exception NOP execution bug (FLX05) Fredrik Noring
2018-02-12 9:28 ` Maciej W. Rozycki
2018-02-15 19:15 ` [RFC v2] " Fredrik Noring
2018-02-15 20:49 ` Maciej W. Rozycki
2018-02-17 11:16 ` Fredrik Noring
2018-02-17 11:57 ` Maciej W. Rozycki
2018-02-17 13:38 ` Fredrik Noring
2018-02-17 15:03 ` Maciej W. Rozycki
2018-02-17 20:04 ` Fredrik Noring
2018-02-20 14:09 ` Maciej W. Rozycki
2018-02-22 17:04 ` Fredrik Noring
2018-02-18 8:47 ` Fredrik Noring
2018-02-20 14:41 ` Maciej W. Rozycki
2018-02-22 17:27 ` Fredrik Noring
2018-02-11 8:01 ` [RFC] MIPS: R5900: Workaround for CACHE instruction near branch delay slot Fredrik Noring
2018-02-11 11:16 ` Aw: " "Jürgen Urban"
2018-02-11 8:09 ` [RFC] MIPS: R5900: The ERET instruction has issues with delay slot and CACHE Fredrik Noring
2018-02-11 11:07 ` Aw: " "Jürgen Urban"
2018-02-11 8:29 ` [RFC] MIPS: R5900: Use mandatory SYNC.L in exception handlers Fredrik Noring
2018-02-11 10:33 ` Aw: " "Jürgen Urban"
2018-02-12 9:22 ` Maciej W. Rozycki
2018-02-12 9:22 ` Maciej W. Rozycki
2018-02-18 10:30 ` Fredrik Noring
2018-02-17 14:43 ` [RFC] MIPS: R5900: Workaround for saving and restoring FPU registers Fredrik Noring
2018-02-17 15:18 ` Maciej W. Rozycki
2018-02-17 17:47 ` Fredrik Noring
2018-02-17 19:33 ` Maciej W. Rozycki
2018-02-18 9:26 ` Fredrik Noring [this message]
2018-02-18 11:08 ` [RFC] MIPS: R5900: Add mandatory SYNC.P to all M[FT]C0 instructions Fredrik Noring
2018-03-03 12:26 ` [RFC] MIPS: PS2: Interrupt request (IRQ) support Fredrik Noring
2018-03-03 13:09 ` Maciej W. Rozycki
2018-03-03 14:14 ` Fredrik Noring
2018-04-09 15:51 ` Fredrik Noring
2018-03-18 10:45 ` Fredrik Noring
2018-03-19 19:15 ` Thomas Gleixner
2018-06-18 18:52 ` [RFC v2] " Fredrik Noring
2017-10-30 17:55 ` [PATCH v2] MIPS: Add basic R5900 support Fredrik Noring
2017-11-24 10:26 ` Maciej W. Rozycki
2017-11-24 10:26 ` Maciej W. Rozycki
2017-11-24 10:39 ` Maciej W. Rozycki
2017-11-24 10:39 ` Maciej W. Rozycki
2017-09-20 14:07 ` Fredrik Noring
2017-09-21 21:07 ` Maciej W. Rozycki
2017-09-21 21:07 ` Maciej W. Rozycki
2017-09-22 16:37 ` Fredrik Noring
2017-09-22 16:37 ` Fredrik Noring
2017-09-29 23:55 ` Maciej W. Rozycki
2017-09-29 23:55 ` Maciej W. Rozycki
2017-09-30 18:26 ` Fredrik Noring
2017-10-02 9:11 ` Maciej W. Rozycki
2017-10-02 9:11 ` Maciej W. Rozycki
2017-10-03 19:49 ` Fredrik Noring
2017-10-05 19:04 ` Fredrik Noring
2017-10-06 20:28 ` Fredrik Noring
2017-10-15 16:39 ` Fredrik Noring
2017-10-17 12:23 ` Maciej W. Rozycki
2017-10-17 12:23 ` Maciej W. Rozycki
2017-10-21 18:00 ` Fredrik Noring
2017-10-23 16:10 ` Maciej W. Rozycki
2017-10-23 16:10 ` Maciej W. Rozycki
2017-09-21 18:11 ` Paul Burton
2017-09-21 18:11 ` Paul Burton
2017-09-21 19:48 ` Maciej W. Rozycki
2017-09-21 19:48 ` Maciej W. Rozycki
2017-10-29 18:42 ` Fredrik Noring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180218092645.GB2577@localhost.localdomain \
--to=noring@nocrew.org \
--cc=JuergenUrban@gmx.de \
--cc=linux-mips@linux-mips.org \
--cc=macro@mips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.