From: <Ajay.Kathat@microchip.com> To: <linux-wireless@vger.kernel.org> Cc: <devel@driverdev.osuosl.org>, <gregkh@linuxfoundation.org>, <johannes@sipsolutions.net>, <Nicolas.Ferre@microchip.com>, <Claudiu.Beznea@microchip.com>, <Sripad.Balwadgi@microchip.com>, <Venkateswara.Kaja@microchip.com>, <Ajay.Kathat@microchip.com> Subject: [PATCH v7 16/17] dt: bindings: net: add microchip,wilc1000.yaml Date: Tue, 23 Jun 2020 11:00:14 +0000 [thread overview] Message-ID: <20200623110000.31559-17-ajay.kathat@microchip.com> (raw) In-Reply-To: <20200623110000.31559-1-ajay.kathat@microchip.com> From: Ajay Singh <ajay.kathat@microchip.com> This file describes the binding details to connect wilc1000 device. It's moved from staging to 'Documentation/devicetree/bindings/net/wireless' path. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> --- This patch was reviewed earlier with previous version[v6] of series [1]. [1]. https://lore.kernel.org/linux-wireless/20200405013235.GA24105@bogus .../net/wireless/microchip,wilc1000.yaml | 71 +++++++++++++++++++ 1 file changed, 71 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml new file mode 100644 index 000000000000..2c320eb2a8c4 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip WILC wireless devicetree bindings + +maintainers: + - Adham Abozaeid <adham.abozaeid@microchip.com> + - Ajay Singh <ajay.kathat@microchip.com> + +description: + The wilc1000 chips can be connected via SPI or SDIO. This document + describes the binding to connect wilc devices. + +properties: + compatible: + const: microchip,wilc1000 + + spi-max-frequency: true + + interrupts: + maxItems: 1 + + clocks: + description: phandle to the clock connected on rtc clock line. + maxItems: 1 + + clock-names: + const: rtc + +required: + - compatible + - interrupts + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + wifi@0 { + compatible = "microchip,wilc1000"; + spi-max-frequency = <48000000>; + reg = <0>; + interrupt-parent = <&pioC>; + interrupts = <27 0>; + clocks = <&pck1>; + clock-names = "rtc"; + }; + }; + + - | + mmc { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; + non-removable; + vmmc-supply = <&vcc_mmc1_reg>; + vqmmc-supply = <&vcc_3v3_reg>; + bus-width = <4>; + wifi@0 { + compatible = "microchip,wilc1000"; + reg = <0>; + interrupt-parent = <&pioC>; + interrupts = <27 0>; + clocks = <&pck1>; + clock-names = "rtc"; + }; + }; -- 2.24.0
WARNING: multiple messages have this Message-ID (diff)
From: <Ajay.Kathat@microchip.com> To: <linux-wireless@vger.kernel.org> Cc: devel@driverdev.osuosl.org, Ajay.Kathat@microchip.com, Venkateswara.Kaja@microchip.com, gregkh@linuxfoundation.org, Nicolas.Ferre@microchip.com, johannes@sipsolutions.net, Sripad.Balwadgi@microchip.com Subject: [PATCH v7 16/17] dt: bindings: net: add microchip,wilc1000.yaml Date: Tue, 23 Jun 2020 11:00:14 +0000 [thread overview] Message-ID: <20200623110000.31559-17-ajay.kathat@microchip.com> (raw) In-Reply-To: <20200623110000.31559-1-ajay.kathat@microchip.com> From: Ajay Singh <ajay.kathat@microchip.com> This file describes the binding details to connect wilc1000 device. It's moved from staging to 'Documentation/devicetree/bindings/net/wireless' path. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> --- This patch was reviewed earlier with previous version[v6] of series [1]. [1]. https://lore.kernel.org/linux-wireless/20200405013235.GA24105@bogus .../net/wireless/microchip,wilc1000.yaml | 71 +++++++++++++++++++ 1 file changed, 71 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml new file mode 100644 index 000000000000..2c320eb2a8c4 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip WILC wireless devicetree bindings + +maintainers: + - Adham Abozaeid <adham.abozaeid@microchip.com> + - Ajay Singh <ajay.kathat@microchip.com> + +description: + The wilc1000 chips can be connected via SPI or SDIO. This document + describes the binding to connect wilc devices. + +properties: + compatible: + const: microchip,wilc1000 + + spi-max-frequency: true + + interrupts: + maxItems: 1 + + clocks: + description: phandle to the clock connected on rtc clock line. + maxItems: 1 + + clock-names: + const: rtc + +required: + - compatible + - interrupts + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + wifi@0 { + compatible = "microchip,wilc1000"; + spi-max-frequency = <48000000>; + reg = <0>; + interrupt-parent = <&pioC>; + interrupts = <27 0>; + clocks = <&pck1>; + clock-names = "rtc"; + }; + }; + + - | + mmc { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; + non-removable; + vmmc-supply = <&vcc_mmc1_reg>; + vqmmc-supply = <&vcc_3v3_reg>; + bus-width = <4>; + wifi@0 { + compatible = "microchip,wilc1000"; + reg = <0>; + interrupt-parent = <&pioC>; + interrupts = <27 0>; + clocks = <&pck1>; + clock-names = "rtc"; + }; + }; -- 2.24.0 _______________________________________________ devel mailing list devel@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
next prev parent reply other threads:[~2020-06-23 11:00 UTC|newest] Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-06-23 11:00 [PATCH v7 00/17] wilc1000: move out of staging Ajay.Kathat 2020-06-23 11:00 ` Ajay.Kathat 2020-06-23 11:00 ` [PATCH v7 01/17] wilc1000: add hif.h Ajay.Kathat 2020-06-23 11:00 ` Ajay.Kathat 2020-06-23 11:00 ` [PATCH v7 02/17] wilc1000: add hif.c Ajay.Kathat 2020-06-23 11:00 ` Ajay.Kathat 2020-06-23 11:00 ` [PATCH v7 03/17] wilc1000: add wlan_if.h Ajay.Kathat 2020-06-23 11:00 ` Ajay.Kathat 2020-06-23 11:00 ` [PATCH v7 04/17] wilc1000: add wlan_cfg.h Ajay.Kathat 2020-06-23 11:00 ` Ajay.Kathat 2020-06-23 11:00 ` [PATCH v7 05/17] wilc1000: add wlan_cfg.c Ajay.Kathat 2020-06-23 11:00 ` Ajay.Kathat 2020-06-23 11:00 ` [PATCH v7 06/17] wilc1000: add cfg80211.c Ajay.Kathat 2020-06-23 11:00 ` Ajay.Kathat 2020-06-24 9:00 ` Johannes Berg 2020-06-24 9:00 ` Johannes Berg 2020-06-23 11:00 ` [PATCH v7 07/17] wilc1000: add cfg80211.h Ajay.Kathat 2020-06-23 11:00 ` Ajay.Kathat 2020-06-23 11:00 ` [PATCH v7 08/17] wilc1000: add netdev.h Ajay.Kathat 2020-06-23 11:00 ` Ajay.Kathat 2020-06-23 11:00 ` [PATCH v7 09/17] wilc1000: add netdev.c Ajay.Kathat 2020-06-23 11:00 ` Ajay.Kathat 2020-06-23 11:00 ` [PATCH v7 10/17] wilc1000: add mon.c Ajay.Kathat 2020-06-23 11:00 ` Ajay.Kathat 2020-06-23 11:00 ` [PATCH v7 12/17] wilc1000: add wlan.h Ajay.Kathat 2020-06-23 11:00 ` Ajay.Kathat 2020-06-23 11:00 ` [PATCH v7 11/17] wilc1000: add spi.c Ajay.Kathat 2020-06-23 11:00 ` Ajay.Kathat 2020-06-23 11:00 ` [PATCH v7 13/17] wilc1000: add wlan.c Ajay.Kathat 2020-06-23 11:00 ` Ajay.Kathat 2020-06-23 11:00 ` [PATCH v7 15/17] wilc1000: add fw.h Ajay.Kathat 2020-06-23 11:00 ` Ajay.Kathat 2020-06-23 11:00 ` [PATCH v7 14/17] wilc1000: add sdio.c Ajay.Kathat 2020-06-23 11:00 ` Ajay.Kathat 2020-06-23 11:00 ` [PATCH v7 17/17] wilc1000: add Makefile and Kconfig files for wilc1000 compilation Ajay.Kathat 2020-06-23 11:00 ` Ajay.Kathat 2020-06-23 14:52 ` kernel test robot 2020-06-23 14:52 ` kernel test robot 2020-06-23 14:52 ` kernel test robot 2020-06-24 5:26 ` Ajay.Kathat 2020-06-24 5:26 ` Ajay.Kathat 2020-06-24 5:26 ` Ajay.Kathat 2020-06-23 11:00 ` Ajay.Kathat [this message] 2020-06-23 11:00 ` [PATCH v7 16/17] dt: bindings: net: add microchip,wilc1000.yaml Ajay.Kathat 2020-06-24 8:50 ` [PATCH v7 00/17] wilc1000: move out of staging Kalle Valo 2020-06-24 8:50 ` Kalle Valo 2020-06-24 9:10 ` Greg KH 2020-06-24 9:10 ` Greg KH 2020-06-24 9:49 ` Kalle Valo 2020-06-24 9:49 ` Kalle Valo 2020-06-24 14:52 ` Greg KH 2020-06-24 14:52 ` Greg KH 2020-06-26 5:34 ` Kalle Valo 2020-06-26 5:34 ` Kalle Valo 2020-06-26 13:46 ` Greg KH 2020-06-26 13:46 ` Greg KH 2020-07-02 7:05 ` Kalle Valo 2020-07-02 7:05 ` Kalle Valo 2020-06-29 13:26 ` Pali Rohár 2020-06-29 13:26 ` Pali Rohár 2020-06-30 3:17 ` Ajay.Kathat 2020-06-30 3:17 ` Ajay.Kathat 2020-07-01 7:55 ` Pali Rohár 2020-07-01 7:55 ` Pali Rohár 2020-07-01 7:56 ` Pali Rohár 2020-07-01 7:56 ` Pali Rohár 2020-07-06 8:12 ` Ulf Hansson 2020-07-06 8:12 ` Ulf Hansson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200623110000.31559-17-ajay.kathat@microchip.com \ --to=ajay.kathat@microchip.com \ --cc=Claudiu.Beznea@microchip.com \ --cc=Nicolas.Ferre@microchip.com \ --cc=Sripad.Balwadgi@microchip.com \ --cc=Venkateswara.Kaja@microchip.com \ --cc=devel@driverdev.osuosl.org \ --cc=gregkh@linuxfoundation.org \ --cc=johannes@sipsolutions.net \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.