All of lore.kernel.org
 help / color / mirror / Atom feed
From: Siew Chin Lim <elly.siew.chin.lim@intel.com>
To: u-boot@lists.denx.de
Subject: [v2, 16/16] configs: socfpga: Add defconfig for Agilex and Stratix 10 with ATF support
Date: Thu,  1 Oct 2020 02:16:14 -0700	[thread overview]
Message-ID: <20201001091614.184612-17-elly.siew.chin.lim@intel.com> (raw)
In-Reply-To: <20201001091614.184612-1-elly.siew.chin.lim@intel.com>

From: Chee Hong Ang <chee.hong.ang@intel.com>

Booting Agilex and Stratix 10 with ATF support.

SPL now loads ATF (BL31), U-Boot proper and DTB from FIT
image. The new boot flow with ATF support is as follow:

SPL -> ATF (BL31) -> U-Boot proper -> OS (Linux)

U-Boot proper now starts at 0x200000 (CONFIG_SYS_TEXT_BASE).
ATF will occupy the address range starting from 0x1000.

Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>

---
v2:
- Add CONFIG_SPL_LOAD_FIT_ADDRESS=0x02000000
- Move board/altera/soc64/fit_spl_atf.sh to
  board/intel/soc64/fit_spl_atf.sh
---
 configs/socfpga_agilex_atf_defconfig    | 72 ++++++++++++++++++++++++++++++++
 configs/socfpga_stratix10_atf_defconfig | 74 +++++++++++++++++++++++++++++++++
 2 files changed, 146 insertions(+)
 create mode 100644 configs/socfpga_agilex_atf_defconfig
 create mode 100644 configs/socfpga_stratix10_atf_defconfig

diff --git a/configs/socfpga_agilex_atf_defconfig b/configs/socfpga_agilex_atf_defconfig
new file mode 100644
index 0000000000..73ca8d1cca
--- /dev/null
+++ b/configs/socfpga_agilex_atf_defconfig
@@ -0,0 +1,72 @@
+CONFIG_ARM=y
+CONFIG_ARM_SMCCC=y
+CONFIG_SPL_LDSCRIPT="arch/arm/mach-socfpga/u-boot-spl-soc64.lds"
+CONFIG_ARCH_SOCFPGA=y
+CONFIG_SYS_TEXT_BASE=0x200000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ENV_SIZE=0x1000
+CONFIG_ENV_OFFSET=0x200
+CONFIG_DM_GPIO=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_TARGET_SOCFPGA_AGILEX_SOCDK=y
+CONFIG_IDENT_STRING="socfpga_agilex"
+CONFIG_SPL_FS_FAT=y
+CONFIG_SPL_TEXT_BASE=0xFFE00000
+CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x02000000
+CONFIG_SPL_FIT_GENERATOR="board/intel/soc64/fit_spl_atf.sh"
+CONFIG_BOOTDELAY=5
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="earlycon"
+CONFIG_SPL_CACHE=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x02000000
+CONFIG_SPL_ATF=y
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="SOCFPGA_AGILEX # "
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_DEFAULT_DEVICE_TREE="socfpga_agilex_socdk"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_ALTERA_SDRAM=y
+CONFIG_DWAPB_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_DW=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_DW=y
+CONFIG_MTD=y
+CONFIG_SF_DEFAULT_MODE=0x2003
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_MII=y
+CONFIG_DM_RESET=y
+CONFIG_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_DESIGNWARE_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_STORAGE=y
+CONFIG_DESIGNWARE_WATCHDOG=y
+CONFIG_WDT=y
+# CONFIG_SPL_USE_TINY_PRINTF is not set
+CONFIG_PANIC_HANG=y
diff --git a/configs/socfpga_stratix10_atf_defconfig b/configs/socfpga_stratix10_atf_defconfig
new file mode 100644
index 0000000000..e0b9c6964c
--- /dev/null
+++ b/configs/socfpga_stratix10_atf_defconfig
@@ -0,0 +1,74 @@
+CONFIG_ARM=y
+CONFIG_ARM_SMCCC=y
+CONFIG_SPL_LDSCRIPT="arch/arm/mach-socfpga/u-boot-spl-soc64.lds"
+CONFIG_ARCH_SOCFPGA=y
+CONFIG_SYS_TEXT_BASE=0x200000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ENV_SIZE=0x1000
+CONFIG_ENV_OFFSET=0x200
+CONFIG_DM_GPIO=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_TARGET_SOCFPGA_STRATIX10_SOCDK=y
+CONFIG_IDENT_STRING="socfpga_stratix10"
+CONFIG_SPL_FS_FAT=y
+CONFIG_SPL_TEXT_BASE=0xFFE00000
+CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x02000000
+CONFIG_SPL_FIT_GENERATOR="board/intel/soc64/fit_spl_atf.sh"
+CONFIG_BOOTDELAY=5
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="earlycon"
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x02000000
+CONFIG_SPL_ATF=y
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="SOCFPGA_STRATIX10 # "
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_DEFAULT_DEVICE_TREE="socfpga_stratix10_socdk"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_ALTERA_SDRAM=y
+CONFIG_FPGA_INTEL_PR=y
+CONFIG_DWAPB_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_DW=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_DW=y
+CONFIG_MTD=y
+CONFIG_SF_DEFAULT_MODE=0x2003
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_MII=y
+CONFIG_DM_RESET=y
+CONFIG_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_DESIGNWARE_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_STORAGE=y
+CONFIG_DESIGNWARE_WATCHDOG=y
+CONFIG_WDT=y
+# CONFIG_SPL_USE_TINY_PRINTF is not set
+CONFIG_PANIC_HANG=y
-- 
2.13.0

  parent reply	other threads:[~2020-10-01  9:16 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-01  9:15 [v2, 00/16] Enable ARM Trusted Firmware for U-Boot Siew Chin Lim
2020-10-01  9:15 ` [v2, 01/16] arm: socfpga: soc64: Remove CONFIG_OF_EMBED Siew Chin Lim
2020-10-01  9:16 ` [v2, 02/16] arm: socfpga: soc64: Add FIT generator script for pack itb with ATF Siew Chin Lim
2020-10-01  9:16 ` [v2, 03/16] arm: socfpga: Add function for checking description from FIT image Siew Chin Lim
2020-10-01  9:16 ` [v2, 04/16] arm: socfpga: soc64: Load FIT image with ATF support Siew Chin Lim
2020-10-01  9:16 ` [v2, 05/16] arm: socfpga: soc64: Override 'lowlevel_init' to support ATF Siew Chin Lim
2020-10-01  9:16 ` [v2, 06/16] arm: socfpga: Disable "spin-table" method for booting Linux Siew Chin Lim
2020-10-01  9:16 ` [v2, 07/16] arm: socfpga: soc64: Add SMC helper function for Intel SOCFPGA (64bits) Siew Chin Lim
2020-10-01  9:16 ` [v2, 08/16] arm: socfpga: soc64: Define SMC function identifiers for PSCI SiP services Siew Chin Lim
2020-10-01  9:16 ` [v2, 09/16] mmc: dwmmc: socfpga: Add ATF support for MMC driver Siew Chin Lim
2020-10-01  9:16 ` [v2, 10/16] net: designware: socfpga: Add ATF support for MAC driver Siew Chin Lim
2020-10-01  9:16 ` [v2, 11/16] arm: socfpga: soc64: Add ATF support for Reset Manager driver Siew Chin Lim
2020-10-01  9:16 ` [v2, 12/16] arm: socfpga: soc64: Add ATF support for FPGA reconfig driver Siew Chin Lim
2020-10-01  9:16 ` [v2, 13/16] arm: socfpga: mailbox: Add 'SYSTEM_RESET' PSCI support to mbox_reset_cold() Siew Chin Lim
2020-10-01  9:16 ` [v2, 14/16] arm: socfpga: soc64: SSBL shall not setup stack on OCRAM Siew Chin Lim
2020-10-01  9:16 ` [v2, 15/16] arm: socfpga: soc64: Skip handoff data access in SSBL Siew Chin Lim
2020-10-01  9:16 ` Siew Chin Lim [this message]
2020-10-01 16:52 ` [v2, 00/16] Enable ARM Trusted Firmware for U-Boot Michal Simek
2020-10-01 18:37   ` Simon Glass
2020-10-01 18:48     ` Marek Vasut
2020-10-01 20:33       ` Tom Rini
2020-10-01 21:46       ` Simon Glass

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201001091614.184612-17-elly.siew.chin.lim@intel.com \
    --to=elly.siew.chin.lim@intel.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.