[v3 13/17] arm: socfpga: Add SPL for Intel N5X device

[Siew Chin Lim <elly.siew.chin.lim@intel.com>]

Add SPL for N5X.

Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
---
 .../mach-socfpga/{spl_agilex.c => spl_n5x.c}  | 37 +++++++++++--------
 1 file changed, 22 insertions(+), 15 deletions(-)
 copy arch/arm/mach-socfpga/{spl_agilex.c => spl_n5x.c} (83%)

diff --git a/arch/arm/mach-socfpga/spl_agilex.c b/arch/arm/mach-socfpga/spl_n5x.c
similarity index 83%
copy from arch/arm/mach-socfpga/spl_agilex.c
copy to arch/arm/mach-socfpga/spl_n5x.c
index ee5a9dc1e2..d056871d29 100644
--- a/arch/arm/mach-socfpga/spl_agilex.c
+++ b/arch/arm/mach-socfpga/spl_n5x.c
@@ -1,27 +1,26 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2019 Intel Corporation <www.intel.com>
+ * Copyright (C) 2020-2021 Intel Corporation <www.intel.com>
  *
  */
 
-#include <init.h>
-#include <log.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/u-boot.h>
-#include <asm/utils.h>
 #include <common.h>
-#include <hang.h>
-#include <image.h>
-#include <spl.h>
 #include <asm/arch/clock_manager.h>
 #include <asm/arch/firewall.h>
 #include <asm/arch/mailbox_s10.h>
 #include <asm/arch/misc.h>
 #include <asm/arch/reset_manager.h>
 #include <asm/arch/system_manager.h>
-#include <watchdog.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/u-boot.h>
+#include <asm/utils.h>
 #include <dm/uclass.h>
+#include <hang.h>
+#include <image.h>
+#include <init.h>
+#include <spl.h>
+#include <watchdog.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -54,27 +53,35 @@ void board_init_f(ulong dummy)
 
 	sysmgr_pinmux_init();
 
+	preloader_console_init();
+
 	ret = uclass_get_device(UCLASS_CLK, 0, &dev);
 	if (ret) {
-		debug("Clock init failed: %d\n", ret);
+		printf("Clock init failed: %d\n", ret);
+		hang();
+	}
+
+	ret = uclass_get_device(UCLASS_CLK, 1, &dev);
+	if (ret) {
+		printf("Memory clock init failed: %d\n", ret);
 		hang();
 	}
 
-	preloader_console_init();
 	print_reset_info();
 	cm_print_clock_quick_summary();
 
 	firewall_setup();
+
 	ret = uclass_get_device(UCLASS_CACHE, 0, &dev);
 	if (ret) {
-		debug("CCU init failed: %d\n", ret);
+		printf("CCU init failed: %d\n", ret);
 		hang();
 	}
 
 #if CONFIG_IS_ENABLED(ALTERA_SDRAM)
 	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
 	if (ret) {
-		debug("DRAM init failed: %d\n", ret);
+		printf("DRAM init failed: %d\n", ret);
 		hang();
 	}
 #endif
-- 
2.19.0