All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: dri-devel@lists.freedesktop.org
Cc: Marek Vasut <marex@denx.de>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Sam Ravnborg <sam@ravnborg.org>,
	Jagan Teki <jagan@amarulasolutions.com>,
	Robert Foss <robert.foss@linaro.org>
Subject: [PATCH 02/14] drm: bridge: icn6211: Fix HFP_HSW_HBP_HI and HFP_MIN handling
Date: Fri, 14 Jan 2022 04:48:26 +0100	[thread overview]
Message-ID: <20220114034838.546267-2-marex@denx.de> (raw)
In-Reply-To: <20220114034838.546267-1-marex@denx.de>

The HFP_HSW_HBP_HI register must be programmed with 2 LSbits of each
Horizontal Front Porch/Sync/Back Porch. Currently the driver programs
this register to 0, which breaks displays with either value above 255.

The HFP_MIN register must be set to the same value as HFP_LI, otherwise
there is visible image distortion, usually in the form of missing lines
at the bottom of the panel.

Fix this by correctly programming the HFP_HSW_HBP_HI and HFP_MIN registers.

Fixes: ce517f18944e3 ("drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
---
 drivers/gpu/drm/bridge/chipone-icn6211.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/bridge/chipone-icn6211.c b/drivers/gpu/drm/bridge/chipone-icn6211.c
index eb26615b2993a..d7eedf35e8415 100644
--- a/drivers/gpu/drm/bridge/chipone-icn6211.c
+++ b/drivers/gpu/drm/bridge/chipone-icn6211.c
@@ -34,6 +34,9 @@
 #define HSYNC_LI		0x24
 #define HBP_LI			0x25
 #define HFP_HSW_HBP_HI		0x26
+#define HFP_HSW_HBP_HI_HFP(n)		(((n) & 0x300) >> 4)
+#define HFP_HSW_HBP_HI_HS(n)		(((n) & 0x300) >> 6)
+#define HFP_HSW_HBP_HI_HBP(n)		(((n) & 0x300) >> 8)
 #define VFP			0x27
 #define VSYNC			0x28
 #define VBP			0x29
@@ -165,6 +168,7 @@ static void chipone_enable(struct drm_bridge *bridge)
 {
 	struct chipone *icn = bridge_to_chipone(bridge);
 	struct drm_display_mode *mode = bridge_to_mode(bridge);
+	u16 hfp, hbp, hsync;
 
 	ICN6211_DSI(icn, MIPI_CFG_PW, MIPI_CFG_PW_CONFIG_DSI);
 
@@ -180,13 +184,18 @@ static void chipone_enable(struct drm_bridge *bridge)
 		    ((mode->hdisplay >> 8) & 0xf) |
 		    (((mode->vdisplay >> 8) & 0xf) << 4));
 
-	ICN6211_DSI(icn, HFP_LI, mode->hsync_start - mode->hdisplay);
+	hfp = mode->hsync_start - mode->hdisplay;
+	hsync = mode->hsync_end - mode->hsync_start;
+	hbp = mode->htotal - mode->hsync_end;
 
-	ICN6211_DSI(icn, HSYNC_LI, mode->hsync_end - mode->hsync_start);
-
-	ICN6211_DSI(icn, HBP_LI, mode->htotal - mode->hsync_end);
-
-	ICN6211_DSI(icn, HFP_HSW_HBP_HI, 0x00);
+	ICN6211_DSI(icn, HFP_LI, hfp & 0xff);
+	ICN6211_DSI(icn, HSYNC_LI, hsync & 0xff);
+	ICN6211_DSI(icn, HBP_LI, hbp & 0xff);
+	/* Top two bits of Horizontal Front porch/Sync/Back porch */
+	ICN6211_DSI(icn, HFP_HSW_HBP_HI,
+		    HFP_HSW_HBP_HI_HFP(hfp) |
+		    HFP_HSW_HBP_HI_HS(hsync) |
+		    HFP_HSW_HBP_HI_HBP(hbp));
 
 	ICN6211_DSI(icn, VFP, mode->vsync_start - mode->vdisplay);
 
@@ -196,7 +205,7 @@ static void chipone_enable(struct drm_bridge *bridge)
 
 	/* dsi specific sequence */
 	ICN6211_DSI(icn, SYNC_EVENT_DLY, 0x80);
-	ICN6211_DSI(icn, HFP_MIN, 0x28);
+	ICN6211_DSI(icn, HFP_MIN, hfp & 0xff);
 	ICN6211_DSI(icn, MIPI_PD_CK_LANE, 0xa0);
 	ICN6211_DSI(icn, PLL_CTRL(12), 0xff);
 	ICN6211_DSI(icn, BIST_POL, BIST_POL_DE_POL);
-- 
2.34.1


  reply	other threads:[~2022-01-14  3:49 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-14  3:48 [PATCH 01/14] drm: bridge: icn6211: Fix register layout Marek Vasut
2022-01-14  3:48 ` Marek Vasut [this message]
2022-01-14  3:48 ` [PATCH 03/14] drm: bridge: icn6211: Switch to atomic operations Marek Vasut
2022-01-14  3:48 ` [PATCH 04/14] drm: bridge: icn6211: Implement atomic_get_input_bus_fmts Marek Vasut
2022-01-14  3:48 ` [PATCH 05/14] drm: bridge: icn6211: Retrieve the display mode from the state Marek Vasut
2022-02-03 12:09   ` Maxime Ripard
2022-02-16 20:13     ` Marek Vasut
2022-01-14  3:48 ` [PATCH 06/14] drm: bridge: icn6211: Add HS/VS/DE polarity handling Marek Vasut
2022-01-14  3:48 ` [PATCH 07/14] drm: bridge: icn6211: Add DSI lane count DT property parsing Marek Vasut
2022-02-03 12:13   ` Maxime Ripard
2022-02-16 20:24     ` Marek Vasut
2022-01-14  3:48 ` [PATCH 08/14] drm: bridge: icn6211: Add generic DSI-to-DPI PLL configuration Marek Vasut
2022-01-14  3:48 ` [PATCH 09/14] drm: bridge: icn6211: Use DSI burst mode without EoT and with LP command mode Marek Vasut
2022-01-14  3:48 ` [PATCH 10/14] drm: bridge: icn6211: Disable DPI color swap Marek Vasut
2022-01-14  3:48 ` [PATCH 11/14] drm: bridge: icn6211: Set SYS_CTRL_1 to value used in examples Marek Vasut
2022-01-14  3:48 ` [PATCH 12/14] drm: bridge: icn6211: Add I2C configuration support Marek Vasut
2022-01-14 10:24   ` kernel test robot
2022-01-14 10:24     ` kernel test robot
2022-02-03 12:17   ` Maxime Ripard
2022-01-14  3:48 ` [PATCH 13/14] drm: bridge: icn6211: Rename ICN6211_DSI to chipone_writeb Marek Vasut
2022-01-14  3:48 ` [PATCH 14/14] drm: bridge: icn6211: Read and validate chip IDs before configuration Marek Vasut
2022-01-14  8:16 ` [PATCH 01/14] drm: bridge: icn6211: Fix register layout Jagan Teki
2022-01-14 14:33   ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220114034838.546267-2-marex@denx.de \
    --to=marex@denx.de \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jagan@amarulasolutions.com \
    --cc=robert.foss@linaro.org \
    --cc=sam@ravnborg.org \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.