All of lore.kernel.org
 help / color / mirror / Atom feed
From: Luca Weiss <luca@z3ntu.xyz>
To: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	"moderated list:ARM/Allwinner sunXi SoC support" 
	<linux-arm-kernel@lists.infradead.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] arm64: dts: allwinner: a64: Add lradc node
Date: Mon, 03 Jun 2019 17:20:51 +0200	[thread overview]
Message-ID: <3880268.VpfjThaCW4@g550jk> (raw)
In-Reply-To: <20190603074247.hlayod2pxq55f6ci@flea>

[-- Attachment #1: Type: text/plain, Size: 2020 bytes --]

On Montag, 3. Juni 2019 09:42:47 CEST Maxime Ripard wrote:
> Hi,
> 
> On Fri, May 31, 2019 at 12:27:55PM +0200, Luca Weiss wrote:
> > On Freitag, 24. Mai 2019 11:20:01 CEST Maxime Ripard wrote:
> > > It would be great to drop the -keys from the compatible, and to
> > > document the bindings
> > > 
> > > Looks good otherwise
> > > 
> > > Maxime
> > 
> > So I should just document the "allwinner,sun50i-a64-lradc" string in
> > Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt ? Don't I
> > also
> > have to add the compatible to the driver code then? Just adding the a64
> > compatible to a dts wouldn't work without that.
> 
> What I meant was that you needed both, something like:
> 
> compatible = "allwinner,sun50i-a64-lradc", "allwinner,sun8i-a83t-lradc";
> 
> That way, the OS will try to match a driver for the A64 compatible if
> any, and fallback to the A83's otherwise. And since we don't have any
> quirk at the moment, there's no change needed to the driver.
> 
> Maxime
> 
> --
> Maxime Ripard, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com

Hi Maxime,
sorry for the long back and forth, I hope I understood you correctly now.
Here's what I would submit as v2 then (I'll split the two files into seperate 
patches as the devicetree documentation suggests)

Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt:
  - compatible: should be one of the following string:
                "allwinner,sun4i-a10-lradc-keys"
                "allwinner,sun8i-a83t-r-lradc"
+               "allwinner,sun50i-a64-lradc", "allwinner,sun8i-a83t-r-lradc"

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi:
+               lradc: lradc@1c21800 {
+                       compatible = "allwinner,sun50i-a64-lradc",
+                                    "allwinner,sun8i-a83t-r-lradc";
+                       reg = <0x01c21800 0x400>;
+                       interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+                       status = "disabled";
+               };
+

Thanks,
Luca

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

WARNING: multiple messages have this Message-ID (diff)
From: Luca Weiss <luca@z3ntu.xyz>
To: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>,
	Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
	"moderated list:ARM/Allwinner sunXi SoC support"
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH] arm64: dts: allwinner: a64: Add lradc node
Date: Mon, 03 Jun 2019 17:20:51 +0200	[thread overview]
Message-ID: <3880268.VpfjThaCW4@g550jk> (raw)
In-Reply-To: <20190603074247.hlayod2pxq55f6ci@flea>


[-- Attachment #1.1: Type: text/plain, Size: 2020 bytes --]

On Montag, 3. Juni 2019 09:42:47 CEST Maxime Ripard wrote:
> Hi,
> 
> On Fri, May 31, 2019 at 12:27:55PM +0200, Luca Weiss wrote:
> > On Freitag, 24. Mai 2019 11:20:01 CEST Maxime Ripard wrote:
> > > It would be great to drop the -keys from the compatible, and to
> > > document the bindings
> > > 
> > > Looks good otherwise
> > > 
> > > Maxime
> > 
> > So I should just document the "allwinner,sun50i-a64-lradc" string in
> > Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt ? Don't I
> > also
> > have to add the compatible to the driver code then? Just adding the a64
> > compatible to a dts wouldn't work without that.
> 
> What I meant was that you needed both, something like:
> 
> compatible = "allwinner,sun50i-a64-lradc", "allwinner,sun8i-a83t-lradc";
> 
> That way, the OS will try to match a driver for the A64 compatible if
> any, and fallback to the A83's otherwise. And since we don't have any
> quirk at the moment, there's no change needed to the driver.
> 
> Maxime
> 
> --
> Maxime Ripard, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com

Hi Maxime,
sorry for the long back and forth, I hope I understood you correctly now.
Here's what I would submit as v2 then (I'll split the two files into seperate 
patches as the devicetree documentation suggests)

Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt:
  - compatible: should be one of the following string:
                "allwinner,sun4i-a10-lradc-keys"
                "allwinner,sun8i-a83t-r-lradc"
+               "allwinner,sun50i-a64-lradc", "allwinner,sun8i-a83t-r-lradc"

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi:
+               lradc: lradc@1c21800 {
+                       compatible = "allwinner,sun50i-a64-lradc",
+                                    "allwinner,sun8i-a83t-r-lradc";
+                       reg = <0x01c21800 0x400>;
+                       interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+                       status = "disabled";
+               };
+

Thanks,
Luca

[-- Attachment #1.2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-06-03 15:21 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-18 17:09 [PATCH] arm64: dts: allwinner: a64: Add lradc node Luca Weiss
2019-05-18 17:09 ` Luca Weiss
2019-05-18 17:09 ` Luca Weiss
2019-05-20 11:07 ` Maxime Ripard
2019-05-20 11:07   ` Maxime Ripard
2019-05-20 11:07   ` Maxime Ripard
2019-05-21  6:43   ` luca
2019-05-21  6:43     ` luca
2019-05-21  6:43     ` luca
2019-05-21 13:09     ` Maxime Ripard
2019-05-21 13:09       ` Maxime Ripard
2019-05-21 13:09       ` Maxime Ripard
2019-05-21 13:52       ` luca
2019-05-21 13:52         ` luca
2019-05-21 13:52         ` luca
2019-05-21 14:25         ` Maxime Ripard
2019-05-21 14:25           ` Maxime Ripard
2019-05-21 14:25           ` Maxime Ripard
2019-05-24  8:35           ` Luca Weiss
2019-05-24  8:35             ` Luca Weiss
2019-05-24  8:35             ` Luca Weiss
2019-05-24  9:20             ` Maxime Ripard
2019-05-24  9:20               ` Maxime Ripard
2019-05-24  9:20               ` Maxime Ripard
2019-05-31 10:27               ` Luca Weiss
2019-05-31 10:27                 ` Luca Weiss
2019-05-31 10:27                 ` Luca Weiss
2019-06-03  7:42                 ` Maxime Ripard
2019-06-03  7:42                   ` Maxime Ripard
2019-06-03  7:42                   ` Maxime Ripard
2019-06-03 15:20                   ` Luca Weiss [this message]
2019-06-03 15:20                     ` Luca Weiss
2019-06-03 15:20                     ` Luca Weiss
2019-06-04  8:28                     ` Maxime Ripard
2019-06-04  8:28                       ` Maxime Ripard
2019-06-04  8:28                       ` Maxime Ripard
2019-06-04 14:42 Luca Weiss
2019-06-04 14:42 ` Luca Weiss
2019-06-04 14:42 ` Luca Weiss
2019-06-04 14:59 ` Maxime Ripard
2019-06-04 14:59   ` Maxime Ripard
2019-06-04 14:59   ` Maxime Ripard
2019-06-04 15:07   ` Luca Weiss
2019-06-04 15:07     ` Luca Weiss
2019-06-04 15:07     ` Luca Weiss

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3880268.VpfjThaCW4@g550jk \
    --to=luca@z3ntu.xyz \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.