From: Andre Przywara <andre.przywara@arm.com>
To: Andrew Jones <drjones@redhat.com>, Paolo Bonzini <pbonzini@redhat.com>
Cc: Marc Zyngier <maz@kernel.org>,
kvmarm@lists.cs.columbia.edu,
linux-arm-kernel@lists.infradead.org, kvm@vger.kernel.org
Subject: [kvm-unit-tests PATCH 08/17] arm: gic: Add simple SPI MP test
Date: Fri, 8 Nov 2019 14:42:31 +0000 [thread overview]
Message-ID: <20191108144240.204202-9-andre.przywara@arm.com> (raw)
In-Reply-To: <20191108144240.204202-1-andre.przywara@arm.com>
Shared Peripheral Interrupts (SPI) can target a specific CPU. Test this
feature by routing the test SPI to each of the vCPUs, then triggering it
and confirm its reception on that requested core.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
arm/gic.c | 31 ++++++++++++++++++++++++++++++-
1 file changed, 30 insertions(+), 1 deletion(-)
diff --git a/arm/gic.c b/arm/gic.c
index 63aa9f4..304b7b9 100644
--- a/arm/gic.c
+++ b/arm/gic.c
@@ -620,16 +620,45 @@ static void spi_test_single(void)
check_acked("now enabled SPI fires", &cpumask);
}
+static void spi_test_smp(void)
+{
+ int cpu;
+ int cores = 1;
+
+ wait_on_ready();
+ for_each_present_cpu(cpu) {
+ if (cpu == smp_processor_id())
+ continue;
+ spi_configure_irq(SPI_IRQ, cpu);
+ if (trigger_and_check_spi(NULL, IRQ_STAT_IRQ, cpu))
+ cores++;
+ else
+ report_info("SPI delivery failed on core %d", cpu);
+ }
+ report("SPI delievered on all cores", cores == nr_cpus);
+}
+
static void spi_send(void)
{
irqs_enable();
spi_test_single();
+ if (nr_cpus > 1)
+ spi_test_smp();
+
check_spurious();
exit(report_summary());
}
+static void spi_test(void *data __unused)
+{
+ if (smp_processor_id() == 0)
+ spi_send();
+ else
+ irq_recv();
+}
+
int main(int argc, char **argv)
{
if (!gic_init()) {
@@ -663,7 +692,7 @@ int main(int argc, char **argv)
report_prefix_pop();
} else if (strcmp(argv[1], "irq") == 0) {
report_prefix_push(argv[1]);
- spi_send();
+ on_cpus(spi_test, NULL);
report_prefix_pop();
} else {
report_abort("Unknown subtest '%s'", argv[1]);
--
2.17.1
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
next prev parent reply other threads:[~2019-11-08 14:43 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-08 14:42 [kvm-unit-tests PATCH 00/17] arm: gic: Test SPIs and interrupt groups Andre Przywara
2019-11-08 14:42 ` [kvm-unit-tests PATCH 01/17] arm: gic: Enable GIC MMIO tests for GICv3 as well Andre Przywara
2019-11-08 17:28 ` Alexandru Elisei
2019-11-12 12:49 ` Auger Eric
2019-11-08 14:42 ` [kvm-unit-tests PATCH 02/17] arm: gic: Generalise function names Andre Przywara
2019-11-12 11:11 ` Alexandru Elisei
2019-11-12 12:49 ` Auger Eric
2019-11-08 14:42 ` [kvm-unit-tests PATCH 03/17] arm: gic: Provide per-IRQ helper functions Andre Przywara
2019-11-12 12:51 ` Alexandru Elisei
2019-11-12 15:53 ` Auger Eric
2019-11-12 16:53 ` Alexandru Elisei
2019-11-12 13:49 ` Auger Eric
2019-11-08 14:42 ` [kvm-unit-tests PATCH 04/17] arm: gic: Support no IRQs test case Andre Przywara
2019-11-12 13:26 ` Alexandru Elisei
2019-11-12 21:14 ` Auger Eric
2019-11-08 14:42 ` [kvm-unit-tests PATCH 05/17] arm: gic: Prepare IRQ handler for handling SPIs Andre Przywara
2019-11-12 13:36 ` Alexandru Elisei
2019-11-12 20:56 ` Auger Eric
2019-11-08 14:42 ` [kvm-unit-tests PATCH 06/17] arm: gic: Add simple shared IRQ test Andre Przywara
2019-11-12 13:54 ` Alexandru Elisei
2019-11-08 14:42 ` [kvm-unit-tests PATCH 07/17] arm: gic: Extend check_acked() to allow silent call Andre Przywara
2019-11-12 15:23 ` Alexandru Elisei
2019-11-14 12:32 ` Andrew Jones
2019-11-15 11:32 ` Alexandru Elisei
2019-11-08 14:42 ` Andre Przywara [this message]
2019-11-12 15:41 ` [kvm-unit-tests PATCH 08/17] arm: gic: Add simple SPI MP test Alexandru Elisei
2019-11-08 14:42 ` [kvm-unit-tests PATCH 09/17] arm: gic: Add test for flipping GICD_CTLR.DS Andre Przywara
2019-11-12 16:42 ` Alexandru Elisei
2019-11-14 13:39 ` Vladimir Murzin
2019-11-14 14:17 ` Andre Przywara
2019-11-14 14:50 ` Vladimir Murzin
2019-11-14 15:21 ` Alexandru Elisei
2019-11-14 15:27 ` Peter Maydell
2019-11-14 15:47 ` Alexandru Elisei
2019-11-14 15:56 ` Peter Maydell
2019-11-08 14:42 ` [kvm-unit-tests PATCH 10/17] arm: gic: Check for writable IGROUPR registers Andre Przywara
2019-11-12 16:51 ` Alexandru Elisei
2019-11-08 14:42 ` [kvm-unit-tests PATCH 11/17] arm: gic: Check for validity of both group enable bits Andre Przywara
2019-11-12 16:58 ` Alexandru Elisei
2019-11-08 14:42 ` [kvm-unit-tests PATCH 12/17] arm: gic: Change gic_read_iar() to take group parameter Andre Przywara
2019-11-12 17:19 ` Alexandru Elisei
2019-11-14 12:50 ` Andrew Jones
2019-11-08 14:42 ` [kvm-unit-tests PATCH 13/17] arm: gic: Change write_eoir() " Andre Przywara
2019-11-08 14:42 ` [kvm-unit-tests PATCH 14/17] arm: gic: Prepare for receiving GIC group 0 interrupts via FIQs Andre Przywara
2019-11-12 17:30 ` Alexandru Elisei
2019-11-08 14:42 ` [kvm-unit-tests PATCH 15/17] arm: gic: Provide FIQ handler Andre Przywara
2019-11-13 10:14 ` Alexandru Elisei
2019-11-08 14:42 ` [kvm-unit-tests PATCH 16/17] arm: gic: Prepare interrupt statistics for both groups Andre Przywara
2019-11-13 10:44 ` Alexandru Elisei
2019-11-08 14:42 ` [kvm-unit-tests PATCH 17/17] arm: gic: Test Group0 SPIs Andre Przywara
2019-11-13 11:26 ` Alexandru Elisei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191108144240.204202-9-andre.przywara@arm.com \
--to=andre.przywara@arm.com \
--cc=drjones@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=maz@kernel.org \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).