From: Jagan Teki <jagan@amarulasolutions.com>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>
Cc: linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-sunxi <linux-sunxi@googlegroups.com>,
Jagan Teki <jagan@amarulasolutions.com>,
Michael Trimarchi <michael@amarulasolutions.com>,
linux-amarula@amarulasolutions.com, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 13/17] drm/sun4i: sun6i_mipi_dsi: Add support for VCC-DSI voltage regulator
Date: Mon, 10 Dec 2018 21:47:25 +0530 [thread overview]
Message-ID: <20181210161729.29720-14-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20181210161729.29720-1-jagan@amarulasolutions.com>
Some boards have VCC-DSI pin connected to voltage regulator which may
not be turned on by default.
Add support for such boards by adding voltage regulator handling code to
MIPI DSI driver.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 14 ++++++++++++++
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 3 +++
2 files changed, 17 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index cbcef7bf7681..a87b65fff0e0 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -1023,6 +1023,12 @@ static int sun6i_dsi_probe(struct platform_device *pdev)
return PTR_ERR(base);
}
+ dsi->regulator = devm_regulator_get(dev, "vcc-dsi");
+ if (IS_ERR(dsi->regulator)) {
+ dev_err(dev, "Couldn't get VCC-DSI supply\n");
+ return PTR_ERR(dsi->regulator);
+ }
+
dsi->regs = devm_regmap_init_mmio_clk(dev, "bus", base,
&sun6i_dsi_regmap_config);
if (IS_ERR(dsi->regs)) {
@@ -1104,6 +1110,13 @@ static int sun6i_dsi_remove(struct platform_device *pdev)
static int __maybe_unused sun6i_dsi_runtime_resume(struct device *dev)
{
struct sun6i_dsi *dsi = dev_get_drvdata(dev);
+ int err;
+
+ err = regulator_enable(dsi->regulator);
+ if (err) {
+ dev_err(dsi->dev, "failed to enable VCC-DSI supply: %d\n", err);
+ return err;
+ }
reset_control_deassert(dsi->reset);
if (dsi->variant->has_mod_clk)
@@ -1138,6 +1151,7 @@ static int __maybe_unused sun6i_dsi_runtime_suspend(struct device *dev)
if (dsi->variant->has_mod_clk)
clk_disable_unprepare(dsi->mod_clk);
reset_control_assert(dsi->reset);
+ regulator_disable(dsi->regulator);
return 0;
}
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
index 597b62227019..0df60f84bab3 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
@@ -13,6 +13,8 @@
#include <drm/drm_encoder.h>
#include <drm/drm_mipi_dsi.h>
+#include <linux/regulator/consumer.h>
+
struct sun6i_dphy {
struct clk *bus_clk;
struct clk *mod_clk;
@@ -32,6 +34,7 @@ struct sun6i_dsi {
struct clk *bus_clk;
struct clk *mod_clk;
struct regmap *regs;
+ struct regulator *regulator;
struct reset_control *reset;
struct sun6i_dphy *dphy;
--
2.18.0.321.gffc6fa0e3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2018-12-10 16:21 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-10 16:17 [PATCH v5 00/17] drm/sun4i: Allwinner A64 MIPI-DSI support Jagan Teki
2018-12-10 16:17 ` [PATCH v5 01/17] clk: sunxi-ng: Add check for minimal rate to NKM PLLs Jagan Teki
2018-12-10 16:17 ` [PATCH v5 02/17] drm/sun4i: sun6i_mipi_dsi: Add has_mod_clk quirk Jagan Teki
2018-12-10 16:17 ` [PATCH v5 03/17] drm/sun4i: sun6i_mipi_dsi: Add Allwinner A64 MIPI DSI support Jagan Teki
2018-12-10 16:17 ` [PATCH v5 04/17] dt-bindings: sun6i-dsi: Add compatible for A64 MIPI DSI Jagan Teki
2018-12-10 16:17 ` [PATCH v5 05/17] drm/sun4i: sun6i_mipi_dsi: Add DSI Generic short write 2 param transfer Jagan Teki
2018-12-10 16:17 ` [PATCH v5 06/17] drm/sun4i: sun6i_mipi_dsi: Fix TCON DRQ set bits Jagan Teki
2018-12-10 16:17 ` [PATCH v5 07/17] drm/sun4i: sun6i_mipi_dsi: Refactor vertical video start delay Jagan Teki
2018-12-11 16:49 ` Maxime Ripard
2018-12-11 17:00 ` Jagan Teki
2018-12-12 19:43 ` Jagan Teki
2018-12-19 15:50 ` Maxime Ripard
2018-12-20 20:56 ` Jagan Teki
2019-01-06 16:29 ` Jagan Teki
2019-01-07 14:11 ` Maxime Ripard
2019-01-07 15:18 ` Jagan Teki
2019-01-08 8:58 ` Maxime Ripard
[not found] ` <CAMty3ZC9OQtwT-iH=S1LhHsBPc_jFKGAnCYYeR9nuKuDWSKLQw@mail.gmail.com>
2019-01-12 16:43 ` Maxime Ripard
2019-01-12 19:37 ` Jagan Teki
2019-01-16 19:17 ` Maxime Ripard
2019-01-17 4:32 ` Jagan Teki
2019-01-18 15:44 ` Jagan Teki
2019-01-22 11:11 ` Maxime Ripard
2019-01-22 11:51 ` Jagan Teki
2019-01-25 21:21 ` Maxime Ripard
2019-01-22 11:14 ` Maxime Ripard
2018-12-10 16:17 ` [PATCH v5 08/17] drm/sun4i: sun6i_mipi_dsi: Fix DSI hbp timing value Jagan Teki
2018-12-10 16:17 ` [PATCH v5 09/17] drm/sun4i: sun6i_mipi_dsi: Fix DSI hblk timing calculation Jagan Teki
2018-12-10 16:17 ` [PATCH v5 10/17] drm/sun4i: sun6i_mipi_dsi: Add DSI hblk packet overhead Jagan Teki
2018-12-10 16:17 ` [PATCH v5 11/17] drm/sun4i: sun6i_mipi_dsi: Fix DSI hfp timing value Jagan Teki
2018-12-10 16:17 ` [PATCH v5 12/17] drm/sun4i: sun6i_mipi_dsi: Set proper vblk timing calculation Jagan Teki
2018-12-10 16:17 ` Jagan Teki [this message]
2018-12-10 16:17 ` [PATCH v5 14/17] dt-bindings: sun6i-dsi: Add VCC-DSI supply property Jagan Teki
2018-12-10 16:17 ` [PATCH v5 15/17] clk: sunxi-ng: a64: Add minimum rate for PLL_MIPI Jagan Teki
2018-12-11 16:32 ` Maxime Ripard
2018-12-11 16:35 ` [linux-sunxi] " Jagan Teki
2018-12-11 16:50 ` Maxime Ripard
2018-12-10 16:17 ` [PATCH v5 16/17] dt-bindings: sun6i-dsi: Add A64 DPHY compatible (w/ A31 fallback) Jagan Teki
2018-12-10 16:17 ` [PATCH v5 17/17] arm64: dts: allwinner: a64: Add DSI pipeline Jagan Teki
2018-12-11 16:34 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181210161729.29720-14-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@bootlin.com \
--cc=michael@amarulasolutions.com \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).