From: "Nícolas F. R. A. Prado" <nfraprado@collabora.com>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: "Chen-Yu Tsai" <wenst@chromium.org>,
"AngeloGioacchino Del Regno"
<angelogioacchino.delregno@collabora.com>,
kernel@collabora.com,
"Nícolas F. R. A. Prado" <nfraprado@collabora.com>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Rob Herring" <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org
Subject: [PATCH 1/3] arm64: dts: mediatek: asurada: Add display regulators
Date: Thu, 8 Sep 2022 13:11:51 -0400 [thread overview]
Message-ID: <20220908171153.670762-2-nfraprado@collabora.com> (raw)
In-Reply-To: <20220908171153.670762-1-nfraprado@collabora.com>
Add the regulators present on the Asurada platform that are used to
power the internal and external displays.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
---
.../boot/dts/mediatek/mt8192-asurada.dtsi | 114 ++++++++++++++++++
1 file changed, 114 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index 4b314435f8fd..1d99e470ea1a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -23,6 +23,42 @@ memory@40000000 {
reg = <0 0x40000000 0 0x80000000>;
};
+ pp1000_dpbrdg: regulator-1v0-dpbrdg {
+ compatible = "regulator-fixed";
+ regulator-name = "pp1000_dpbrdg";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pp1000_dpbrdg_en_pins>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ enable-active-high;
+ regulator-boot-on;
+ gpio = <&pio 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ pp1000_mipibrdg: regulator-1v0-mipibrdg {
+ compatible = "regulator-fixed";
+ regulator-name = "pp1000_mipibrdg";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pp1000_mipibrdg_en_pins>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ enable-active-high;
+ regulator-boot-on;
+ gpio = <&pio 129 GPIO_ACTIVE_HIGH>;
+ };
+
+ pp1800_dpbrdg: regulator-1v8-dpbrdg {
+ compatible = "regulator-fixed";
+ regulator-name = "pp1800_dpbrdg";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pp1800_dpbrdg_en_pins>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ regulator-boot-on;
+ gpio = <&pio 126 GPIO_ACTIVE_HIGH>;
+ };
+
/* system wide LDO 1.8V power rail */
pp1800_ldo_g: regulator-1v8-g {
compatible = "regulator-fixed";
@@ -34,6 +70,30 @@ pp1800_ldo_g: regulator-1v8-g {
vin-supply = <&pp3300_g>;
};
+ pp1800_mipibrdg: regulator-1v8-mipibrdg {
+ compatible = "regulator-fixed";
+ regulator-name = "pp1800_mipibrdg";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pp1800_mipibrdg_en_pins>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ regulator-boot-on;
+ gpio = <&pio 128 GPIO_ACTIVE_HIGH>;
+ };
+
+ pp3300_dpbrdg: regulator-3v3-dpbrdg {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_dpbrdg";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pp3300_dpbrdg_en_pins>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ regulator-boot-on;
+ gpio = <&pio 26 GPIO_ACTIVE_HIGH>;
+ };
+
/* system wide switching 3.3V power rail */
pp3300_g: regulator-3v3-g {
compatible = "regulator-fixed";
@@ -56,6 +116,18 @@ pp3300_ldo_z: regulator-3v3-z {
vin-supply = <&ppvar_sys>;
};
+ pp3300_mipibrdg: regulator-3v3-mipibrdg {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_mipibrdg";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pp3300_mipibrdg_en_pins>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ regulator-boot-on;
+ gpio = <&pio 127 GPIO_ACTIVE_HIGH>;
+ };
+
/* separately switched 3.3V power rail */
pp3300_u: regulator-3v3-u {
compatible = "regulator-fixed";
@@ -719,6 +791,48 @@ pins-wifi-kill {
};
};
+ pp1000_dpbrdg_en_pins: pp1000-dpbrdg-en-pins {
+ pins-en {
+ pinmux = <PINMUX_GPIO19__FUNC_GPIO19>;
+ output-low;
+ };
+ };
+
+ pp1000_mipibrdg_en_pins: pp1000-mipibrdg-en-pins {
+ pins-en {
+ pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
+ output-low;
+ };
+ };
+
+ pp1800_dpbrdg_en_pins: pp1800-dpbrdg-en-pins {
+ pins-en {
+ pinmux = <PINMUX_GPIO126__FUNC_GPIO126>;
+ output-low;
+ };
+ };
+
+ pp1800_mipibrdg_en_pins: pp1800-mipibrd-en-pins {
+ pins-en {
+ pinmux = <PINMUX_GPIO128__FUNC_GPIO128>;
+ output-low;
+ };
+ };
+
+ pp3300_dpbrdg_en_pins: pp3300-dpbrdg-en-pins {
+ pins-en {
+ pinmux = <PINMUX_GPIO26__FUNC_GPIO26>;
+ output-low;
+ };
+ };
+
+ pp3300_mipibrdg_en_pins: pp3300-mipibrdg-en-pins {
+ pins-en {
+ pinmux = <PINMUX_GPIO127__FUNC_GPIO127>;
+ output-low;
+ };
+ };
+
pp3300_wlan_pins: pp3300-wlan-pins {
pins-pcie-en-pp3300-wlan {
pinmux = <PINMUX_GPIO143__FUNC_GPIO143>;
--
2.37.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-08 17:13 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-08 17:11 [PATCH 0/3] arm64: dts: mediatek: asurada: Enable internal display Nícolas F. R. A. Prado
2022-09-08 17:11 ` Nícolas F. R. A. Prado [this message]
2022-09-09 7:46 ` [PATCH 1/3] arm64: dts: mediatek: asurada: Add display regulators AngeloGioacchino Del Regno
2022-09-21 13:48 ` Nícolas F. R. A. Prado
2022-09-21 13:58 ` AngeloGioacchino Del Regno
2022-09-21 14:20 ` Chen-Yu Tsai
2022-09-27 21:13 ` Nícolas F. R. A. Prado
2022-09-08 17:11 ` [PATCH 2/3] arm64: dts: mediatek: asurada: Add display backlight Nícolas F. R. A. Prado
2022-09-09 7:46 ` AngeloGioacchino Del Regno
2022-09-08 17:11 ` [PATCH 3/3] arm64: dts: mediatek: asurada: Enable internal display Nícolas F. R. A. Prado
2022-09-12 10:32 ` [PATCH 0/3] " Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220908171153.670762-2-nfraprado@collabora.com \
--to=nfraprado@collabora.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@collabora.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=wenst@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).