From: "Nícolas F. R. A. Prado" <nfraprado@collabora.com>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: "Chen-Yu Tsai" <wenst@chromium.org>,
"AngeloGioacchino Del Regno"
<angelogioacchino.delregno@collabora.com>,
kernel@collabora.com,
"Nícolas F. R. A. Prado" <nfraprado@collabora.com>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Rob Herring" <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org
Subject: [PATCH 3/3] arm64: dts: mediatek: asurada: Enable internal display
Date: Thu, 8 Sep 2022 13:11:53 -0400 [thread overview]
Message-ID: <20220908171153.670762-4-nfraprado@collabora.com> (raw)
In-Reply-To: <20220908171153.670762-1-nfraprado@collabora.com>
The asurada platform has an ANX7625 bridge connecting the DSI's output
to the internal eDP panel. Add and enable these devices in order to get
a usable internal display.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
---
.../boot/dts/mediatek/mt8192-asurada.dtsi | 73 +++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index 33ef55b6dbe1..fde8548f67ae 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -200,6 +200,14 @@ wifi_restricted_dma_region: wifi@c0000000 {
};
};
+&dsi0 {
+ status = "okay";
+};
+
+&dsi_out {
+ remote-endpoint = <&anx7625_in>;
+};
+
&i2c0 {
status = "okay";
@@ -248,6 +256,53 @@ &i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
+
+ anx_bridge: anx7625@58 {
+ compatible = "analogix,anx7625";
+ reg = <0x58>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&anx7625_pins>;
+ enable-gpios = <&pio 41 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
+ vdd10-supply = <&pp1000_mipibrdg>;
+ vdd18-supply = <&pp1800_mipibrdg>;
+ vdd33-supply = <&pp3300_mipibrdg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ anx7625_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ anx7625_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ aux-bus {
+ panel: panel {
+ compatible = "edp-panel";
+ power-supply = <&pp3300_mipibrdg>;
+ backlight = <&backlight_lcd0>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&anx7625_out>;
+ };
+ };
+ };
+ };
+ };
};
&i2c7 {
@@ -258,6 +313,10 @@ &i2c7 {
pinctrl-0 = <&i2c7_pins>;
};
+&mipi_tx0 {
+ status = "okay";
+};
+
&mmc0 {
status = "okay";
@@ -589,6 +648,20 @@ &pio {
"AUD_DAT_MISO0",
"AUD_DAT_MISO1";
+ anx7625_pins: anx7625-default-pins {
+ pins-out {
+ pinmux = <PINMUX_GPIO41__FUNC_GPIO41>,
+ <PINMUX_GPIO42__FUNC_GPIO42>;
+ output-low;
+ };
+
+ pins-in {
+ pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
+ input-enable;
+ bias-pull-up;
+ };
+ };
+
cr50_int: cr50-irq-default-pins {
pins-gsc-ap-int-odl {
pinmux = <PINMUX_GPIO171__FUNC_GPIO171>;
--
2.37.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-08 17:14 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-08 17:11 [PATCH 0/3] arm64: dts: mediatek: asurada: Enable internal display Nícolas F. R. A. Prado
2022-09-08 17:11 ` [PATCH 1/3] arm64: dts: mediatek: asurada: Add display regulators Nícolas F. R. A. Prado
2022-09-09 7:46 ` AngeloGioacchino Del Regno
2022-09-21 13:48 ` Nícolas F. R. A. Prado
2022-09-21 13:58 ` AngeloGioacchino Del Regno
2022-09-21 14:20 ` Chen-Yu Tsai
2022-09-27 21:13 ` Nícolas F. R. A. Prado
2022-09-08 17:11 ` [PATCH 2/3] arm64: dts: mediatek: asurada: Add display backlight Nícolas F. R. A. Prado
2022-09-09 7:46 ` AngeloGioacchino Del Regno
2022-09-08 17:11 ` Nícolas F. R. A. Prado [this message]
2022-09-12 10:32 ` [PATCH 0/3] arm64: dts: mediatek: asurada: Enable internal display Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220908171153.670762-4-nfraprado@collabora.com \
--to=nfraprado@collabora.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@collabora.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=wenst@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).