From: Jon Hunter <jonathanh@nvidia.com>
To: Joseph Lo <josephl@nvidia.com>,
Thierry Reding <thierry.reding@gmail.com>,
Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: linux-tegra@vger.kernel.org, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 16/19] arm64: dts: tegra210-p2371-2180: enable DFLL clock
Date: Fri, 7 Dec 2018 14:57:55 +0000 [thread overview]
Message-ID: <827e05c8-13b9-fb5e-7bca-1a34b81763b1@nvidia.com> (raw)
In-Reply-To: <20181204092548.3038-17-josephl@nvidia.com>
On 04/12/2018 09:25, Joseph Lo wrote:
> Enable DFLL clock for Jetson TX1 platform.
>
> Signed-off-by: Joseph Lo <josephl@nvidia.com>
> ---
> .../boot/dts/nvidia/tegra210-p2371-2180.dts | 20 +++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
> index 37e3c46e753f..53f497c2b3ff 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
> @@ -78,4 +78,24 @@
> };
> };
> };
> +
> + clock@70110000 {
> + status = "okay";
> + nvidia,pwm-to-pmic;
> + nvidia,init-uv = <1000000>;
> + nvidia,align-offset-uv = <708000>;
> + nvidia,align-step-uv = <19200>;
> + nvidia,sample-rate = <25000>;
> + nvidia,droop-ctrl = <0x00000f00>;
> + nvidia,force-mode = <1>;
> + nvidia,cf = <6>;
> + nvidia,ci = <0>;
> + nvidia,cg = <2>;
> + nvidia,idle-override;
> + nvidia,one-shot-calibrate;
I don't see any Documentation for or usage of the above two properties.
Jon
--
nvpublic
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2018-12-07 14:58 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-04 9:25 [PATCH 00/19] Tegra210 DFLL support Joseph Lo
2018-12-04 9:25 ` [PATCH 01/19] dt-bindings: clock: tegra124-dfll: Update DFLL binding for PWM regulator Joseph Lo
2018-12-07 13:41 ` Jon Hunter
2018-12-10 8:49 ` Joseph Lo
2018-12-10 8:59 ` Jon Hunter
2018-12-10 9:31 ` Joseph Lo
2018-12-10 9:44 ` Jon Hunter
2018-12-11 1:28 ` Joseph Lo
2018-12-11 9:16 ` Peter De Schrijver
2018-12-11 9:36 ` Joseph Lo
2018-12-11 9:15 ` Peter De Schrijver
2018-12-11 11:52 ` Jon Hunter
2018-12-12 1:52 ` Joseph Lo
2018-12-04 9:25 ` [PATCH 02/19] dt-bindings: clock: tegra124-dfll: add Tegra210 support Joseph Lo
2018-12-07 13:50 ` Jon Hunter
2018-12-04 9:25 ` [PATCH 03/19] dt-bindings: cpufreq: tegra124: remove vdd-cpu-supply from required properties Joseph Lo
2018-12-04 15:36 ` Peter De Schrijver
2018-12-05 3:05 ` Joseph Lo
2018-12-05 9:37 ` Peter De Schrijver
2018-12-07 13:52 ` Jon Hunter
2018-12-04 9:25 ` [PATCH 04/19] dt-bindings: cpufreq: tegra124: remove cpu_lp clock " Joseph Lo
2018-12-04 15:37 ` Peter De Schrijver
2018-12-05 3:10 ` Joseph Lo
2018-12-07 13:53 ` Jon Hunter
2018-12-04 9:25 ` [PATCH 05/19] clk: tegra: dfll: registration for multiple SoCs Joseph Lo
2018-12-07 13:55 ` Jon Hunter
2018-12-04 9:25 ` [PATCH 06/19] clk: tegra: dfll: CVB calculation alignment with the regulator Joseph Lo
2018-12-07 14:10 ` Jon Hunter
2018-12-11 6:23 ` Joseph Lo
2018-12-04 9:25 ` [PATCH 07/19] clk: tegra: dfll: support PWM regulator control Joseph Lo
2018-12-04 15:53 ` Peter De Schrijver
2018-12-05 6:14 ` Joseph Lo
2018-12-07 14:26 ` Jon Hunter
2018-12-11 6:36 ` Joseph Lo
2018-12-07 15:09 ` Jon Hunter
2018-12-11 6:37 ` Joseph Lo
2018-12-04 9:25 ` [PATCH 08/19] clk: tegra: dfll: round down voltages based on alignment Joseph Lo
2018-12-04 15:46 ` Peter De Schrijver
2018-12-05 6:20 ` Joseph Lo
2018-12-05 6:51 ` Joseph Lo
2018-12-05 9:11 ` Peter De Schrijver
2018-12-05 9:30 ` Joseph Lo
2018-12-07 14:34 ` Jon Hunter
2018-12-04 9:25 ` [PATCH 09/19] clk: tegra: dfll: add CVB tables for Tegra210 Joseph Lo
2018-12-07 14:39 ` Jon Hunter
2018-12-11 7:34 ` Joseph Lo
2018-12-04 9:25 ` [PATCH 10/19] clk: tegra: dfll: build clk-dfll.c for Tegra124 and Tegra210 Joseph Lo
2018-12-07 14:40 ` Jon Hunter
2018-12-04 9:25 ` [PATCH 11/19] cpufreq: tegra124: do not handle the CPU rail Joseph Lo
2018-12-07 14:49 ` Jon Hunter
2018-12-11 8:48 ` Joseph Lo
2018-12-04 9:25 ` [PATCH 12/19] cpufreq: tegra124: extend to support Tegra210 Joseph Lo
2018-12-04 9:30 ` Viresh Kumar
2018-12-04 11:22 ` Dmitry Osipenko
2018-12-05 3:25 ` Joseph Lo
2018-12-07 14:50 ` Jon Hunter
2018-12-04 9:25 ` [PATCH 13/19] arm64: dts: tegra210: add DFLL clock Joseph Lo
2018-12-07 14:54 ` Jon Hunter
2018-12-04 9:25 ` [PATCH 14/19] arm64: dts: tegra210: add CPU clocks Joseph Lo
2018-12-07 14:54 ` Jon Hunter
2018-12-04 9:25 ` [PATCH 15/19] arm64: dts: tegra210-p2597: add pinmux for PWM-based DFLL support Joseph Lo
2018-12-07 14:55 ` Jon Hunter
2018-12-04 9:25 ` [PATCH 16/19] arm64: dts: tegra210-p2371-2180: enable DFLL clock Joseph Lo
2018-12-07 14:57 ` Jon Hunter [this message]
2018-12-11 8:52 ` Joseph Lo
2018-12-04 9:25 ` [PATCH 17/19] arm64: dts: tegra210-smaug: add CPU power rail regulator Joseph Lo
2018-12-07 15:03 ` Jon Hunter
2018-12-04 9:25 ` [PATCH 18/19] arm64: dts: tegra210-smaug: enable DFLL clock Joseph Lo
2018-12-07 15:03 ` Jon Hunter
2018-12-04 9:25 ` [PATCH 19/19] arm64: defconfig: Enable MAX8973 regulator Joseph Lo
2018-12-07 15:04 ` Jon Hunter
2018-12-04 15:10 ` [PATCH 00/19] Tegra210 DFLL support Thierry Reding
2018-12-05 6:11 ` Joseph Lo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=827e05c8-13b9-fb5e-7bca-1a34b81763b1@nvidia.com \
--to=jonathanh@nvidia.com \
--cc=josephl@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=pdeschrijver@nvidia.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).