From: Jean-Jacques Hiblot <jjhiblot@ti.com> To: jacek.anaszewski@gmail.com, pavel@ucw.cz, dmurphy@ti.com Cc: linux-leds@vger.kernel.org, linux-kernel@vger.kernel.org, tomi.valkeinen@ti.com, Jean-Jacques Hiblot <jjhiblot@ti.com> Subject: [PATCH v2 1/2] leds: tlc591xx: simplify driver by using the managed led API Date: Mon, 8 Jul 2019 12:06:19 +0200 [thread overview] Message-ID: <20190708100620.22388-2-jjhiblot@ti.com> (raw) In-Reply-To: <20190708100620.22388-1-jjhiblot@ti.com> Use the managed API of the LED class (devm_led_classdev_register() instead of led_classdev_register()). This allows us to remove the code used to track-and-destroy the LED devices Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> --- drivers/leds/leds-tlc591xx.c | 79 +++++++++--------------------------- 1 file changed, 20 insertions(+), 59 deletions(-) diff --git a/drivers/leds/leds-tlc591xx.c b/drivers/leds/leds-tlc591xx.c index 59ff088c7d75..3d5a4b92f016 100644 --- a/drivers/leds/leds-tlc591xx.c +++ b/drivers/leds/leds-tlc591xx.c @@ -128,51 +128,6 @@ tlc591xx_brightness_set(struct led_classdev *led_cdev, return err; } -static void -tlc591xx_destroy_devices(struct tlc591xx_priv *priv, unsigned int j) -{ - int i = j; - - while (--i >= 0) { - if (priv->leds[i].active) - led_classdev_unregister(&priv->leds[i].ldev); - } -} - -static int -tlc591xx_configure(struct device *dev, - struct tlc591xx_priv *priv, - const struct tlc591xx *tlc591xx) -{ - unsigned int i; - int err = 0; - - tlc591xx_set_mode(priv->regmap, MODE2_DIM); - for (i = 0; i < TLC591XX_MAX_LEDS; i++) { - struct tlc591xx_led *led = &priv->leds[i]; - - if (!led->active) - continue; - - led->priv = priv; - led->led_no = i; - led->ldev.brightness_set_blocking = tlc591xx_brightness_set; - led->ldev.max_brightness = LED_FULL; - err = led_classdev_register(dev, &led->ldev); - if (err < 0) { - dev_err(dev, "couldn't register LED %s\n", - led->ldev.name); - goto exit; - } - } - - return 0; - -exit: - tlc591xx_destroy_devices(priv, i); - return err; -} - static const struct regmap_config tlc591xx_regmap = { .reg_bits = 8, .val_bits = 8, @@ -225,7 +180,11 @@ tlc591xx_probe(struct i2c_client *client, i2c_set_clientdata(client, priv); + tlc591xx_set_mode(priv->regmap, MODE2_DIM); + for_each_child_of_node(np, child) { + struct tlc591xx_led *led; + err = of_property_read_u32(child, "reg", ®); if (err) { of_node_put(child); @@ -236,22 +195,25 @@ tlc591xx_probe(struct i2c_client *client, of_node_put(child); return -EINVAL; } - priv->leds[reg].active = true; - priv->leds[reg].ldev.name = + led = &priv->leds[reg]; + + led->active = true; + led->ldev.name = of_get_property(child, "label", NULL) ? : child->name; - priv->leds[reg].ldev.default_trigger = + led->ldev.default_trigger = of_get_property(child, "linux,default-trigger", NULL); - } - return tlc591xx_configure(dev, priv, tlc591xx); -} - -static int -tlc591xx_remove(struct i2c_client *client) -{ - struct tlc591xx_priv *priv = i2c_get_clientdata(client); - - tlc591xx_destroy_devices(priv, TLC591XX_MAX_LEDS); + led->priv = priv; + led->led_no = reg; + led->ldev.brightness_set_blocking = tlc591xx_brightness_set; + led->ldev.max_brightness = LED_FULL; + err = devm_led_classdev_register(dev, &led->ldev); + if (err < 0) { + dev_err(dev, "couldn't register LED %s\n", + led->ldev.name); + return err; + } + } return 0; } @@ -268,7 +230,6 @@ static struct i2c_driver tlc591xx_driver = { .of_match_table = of_match_ptr(of_tlc591xx_leds_match), }, .probe = tlc591xx_probe, - .remove = tlc591xx_remove, .id_table = tlc591xx_id, }; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Jean-Jacques Hiblot <jjhiblot@ti.com> To: <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>, <dmurphy@ti.com> Cc: <linux-leds@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <tomi.valkeinen@ti.com>, Jean-Jacques Hiblot <jjhiblot@ti.com> Subject: [PATCH v2 1/2] leds: tlc591xx: simplify driver by using the managed led API Date: Mon, 8 Jul 2019 12:06:19 +0200 [thread overview] Message-ID: <20190708100620.22388-2-jjhiblot@ti.com> (raw) Message-ID: <20190708100619.BZXHwcxSslbhRwi3j37yp7uX864D9X_etS08Rgt3hN4@z> (raw) In-Reply-To: <20190708100620.22388-1-jjhiblot@ti.com> Use the managed API of the LED class (devm_led_classdev_register() instead of led_classdev_register()). This allows us to remove the code used to track-and-destroy the LED devices Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> --- drivers/leds/leds-tlc591xx.c | 79 +++++++++--------------------------- 1 file changed, 20 insertions(+), 59 deletions(-) diff --git a/drivers/leds/leds-tlc591xx.c b/drivers/leds/leds-tlc591xx.c index 59ff088c7d75..3d5a4b92f016 100644 --- a/drivers/leds/leds-tlc591xx.c +++ b/drivers/leds/leds-tlc591xx.c @@ -128,51 +128,6 @@ tlc591xx_brightness_set(struct led_classdev *led_cdev, return err; } -static void -tlc591xx_destroy_devices(struct tlc591xx_priv *priv, unsigned int j) -{ - int i = j; - - while (--i >= 0) { - if (priv->leds[i].active) - led_classdev_unregister(&priv->leds[i].ldev); - } -} - -static int -tlc591xx_configure(struct device *dev, - struct tlc591xx_priv *priv, - const struct tlc591xx *tlc591xx) -{ - unsigned int i; - int err = 0; - - tlc591xx_set_mode(priv->regmap, MODE2_DIM); - for (i = 0; i < TLC591XX_MAX_LEDS; i++) { - struct tlc591xx_led *led = &priv->leds[i]; - - if (!led->active) - continue; - - led->priv = priv; - led->led_no = i; - led->ldev.brightness_set_blocking = tlc591xx_brightness_set; - led->ldev.max_brightness = LED_FULL; - err = led_classdev_register(dev, &led->ldev); - if (err < 0) { - dev_err(dev, "couldn't register LED %s\n", - led->ldev.name); - goto exit; - } - } - - return 0; - -exit: - tlc591xx_destroy_devices(priv, i); - return err; -} - static const struct regmap_config tlc591xx_regmap = { .reg_bits = 8, .val_bits = 8, @@ -225,7 +180,11 @@ tlc591xx_probe(struct i2c_client *client, i2c_set_clientdata(client, priv); + tlc591xx_set_mode(priv->regmap, MODE2_DIM); + for_each_child_of_node(np, child) { + struct tlc591xx_led *led; + err = of_property_read_u32(child, "reg", ®); if (err) { of_node_put(child); @@ -236,22 +195,25 @@ tlc591xx_probe(struct i2c_client *client, of_node_put(child); return -EINVAL; } - priv->leds[reg].active = true; - priv->leds[reg].ldev.name = + led = &priv->leds[reg]; + + led->active = true; + led->ldev.name = of_get_property(child, "label", NULL) ? : child->name; - priv->leds[reg].ldev.default_trigger = + led->ldev.default_trigger = of_get_property(child, "linux,default-trigger", NULL); - } - return tlc591xx_configure(dev, priv, tlc591xx); -} - -static int -tlc591xx_remove(struct i2c_client *client) -{ - struct tlc591xx_priv *priv = i2c_get_clientdata(client); - - tlc591xx_destroy_devices(priv, TLC591XX_MAX_LEDS); + led->priv = priv; + led->led_no = reg; + led->ldev.brightness_set_blocking = tlc591xx_brightness_set; + led->ldev.max_brightness = LED_FULL; + err = devm_led_classdev_register(dev, &led->ldev); + if (err < 0) { + dev_err(dev, "couldn't register LED %s\n", + led->ldev.name); + return err; + } + } return 0; } @@ -268,7 +230,6 @@ static struct i2c_driver tlc591xx_driver = { .of_match_table = of_match_ptr(of_tlc591xx_leds_match), }, .probe = tlc591xx_probe, - .remove = tlc591xx_remove, .id_table = tlc591xx_id, }; -- 2.17.1
next prev parent reply other threads:[~2019-07-08 10:06 UTC|newest] Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-07-08 10:06 [PATCH v2 0/2] leds: tlc591xx: switch to OF and managed API Jean-Jacques Hiblot 2019-07-08 10:06 ` Jean-Jacques Hiblot 2019-07-08 10:06 ` Jean-Jacques Hiblot [this message] 2019-07-08 10:06 ` [PATCH v2 1/2] leds: tlc591xx: simplify driver by using the managed led API Jean-Jacques Hiblot 2019-07-08 18:08 ` Dan Murphy 2019-07-08 18:08 ` Dan Murphy 2019-07-10 7:44 ` Jean-Jacques Hiblot 2019-07-10 7:44 ` Jean-Jacques Hiblot 2019-07-08 10:06 ` [PATCH v2 2/2] leds: tlc591xx: Use the OF version of the LED registration function Jean-Jacques Hiblot 2019-07-08 10:06 ` Jean-Jacques Hiblot 2019-07-31 13:14 ` [PATCH v2 0/2] leds: tlc591xx: switch to OF and managed API Tomi Valkeinen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190708100620.22388-2-jjhiblot@ti.com \ --to=jjhiblot@ti.com \ --cc=dmurphy@ti.com \ --cc=jacek.anaszewski@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-leds@vger.kernel.org \ --cc=pavel@ucw.cz \ --cc=tomi.valkeinen@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).