linux-leds.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Cc: mazziesaccount@gmail.com,
	"Jacek Anaszewski" <jacek.anaszewski@gmail.com>,
	"Pavel Machek" <pavel@ucw.cz>, "Dan Murphy" <dmurphy@ti.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"Lee Jones" <lee.jones@linaro.org>,
	"Liam Girdwood" <lgirdwood@gmail.com>,
	"Mark Brown" <broonie@kernel.org>,
	"Jonathan Corbet" <corbet@lwn.net>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Stephen Boyd" <sboyd@kernel.org>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Bartosz Golaszewski" <bgolaszewski@baylibre.com>,
	"Alessandro Zummo" <a.zummo@towertech.it>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Arnd Bergmann" <arnd@arndb.de>,
	"Mauro Carvalho Chehab" <mchehab+samsung@kernel.org>,
	"Wolfram Sang" <wsa+renesas@sang-engineering.com>,
	"Phil Edworthy" <phil.edworthy@renesas.com>,
	"Noralf Trønnes" <noralf@tronnes.org>,
	linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-rtc@vger.kernel.org
Subject: Re: [PATCH v6 12/15] rtc: bd70528 add BD71828 support
Date: Wed, 11 Dec 2019 12:38:28 +0100	[thread overview]
Message-ID: <20191211113828.GW1463890@piout.net> (raw)
In-Reply-To: <16a2492d4c70a80628dbf1a64a85c5b554c7f6e4.1576054779.git.matti.vaittinen@fi.rohmeurope.com>

Hi,

I just realised the subject is missing a colon, it should be:

rtc: bd70528: add BD71828 support

Please fix it in case you ever have to resend for another reason.

On 11/12/2019 11:48:35+0200, Matti Vaittinen wrote:
> ROHM BD71828 PMIC RTC block is from many parts similar to one
> on BD70528. Support BD71828 RTC using BD70528 RTC driver and
> avoid re-inventing the wheel.
> 
> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> 
> ---
> Changes since v5:
> - Added missing blank line
> 
>  drivers/rtc/Kconfig              |   3 +-
>  drivers/rtc/rtc-bd70528.c        | 168 ++++++++++++++++++++++++++++---
>  include/linux/mfd/rohm-bd70528.h |  13 +--
>  include/linux/mfd/rohm-bd71828.h |   4 +-
>  include/linux/mfd/rohm-shared.h  |  27 +++++
>  5 files changed, 186 insertions(+), 29 deletions(-)
>  create mode 100644 include/linux/mfd/rohm-shared.h
> 
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index d77515d8382c..df7a3843069d 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -498,12 +498,13 @@ config RTC_DRV_M41T80_WDT
>  	help
>  	  If you say Y here you will get support for the
>  	  watchdog timer in the ST M41T60 and M41T80 RTC chips series.
> +
>  config RTC_DRV_BD70528
>  	tristate "ROHM BD70528 PMIC RTC"
>  	depends on MFD_ROHM_BD70528 && (BD70528_WATCHDOG || !BD70528_WATCHDOG)
>  	help
>  	  If you say Y here you will get support for the RTC
> -	  on ROHM BD70528 Power Management IC.
> +	  block on ROHM BD70528 and BD71828 Power Management IC.
>  
>  	  This driver can also be built as a module. If so, the module
>  	  will be called rtc-bd70528.
> diff --git a/drivers/rtc/rtc-bd70528.c b/drivers/rtc/rtc-bd70528.c
> index 627037aa66a8..2ce202040556 100644
> --- a/drivers/rtc/rtc-bd70528.c
> +++ b/drivers/rtc/rtc-bd70528.c
> @@ -6,6 +6,7 @@
>  
>  #include <linux/bcd.h>
>  #include <linux/mfd/rohm-bd70528.h>
> +#include <linux/mfd/rohm-bd71828.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/platform_device.h>
> @@ -15,7 +16,7 @@
>  /*
>   * We read regs RTC_SEC => RTC_YEAR
>   * this struct is ordered according to chip registers.
> - * Keep it u8 only to avoid padding issues.
> + * Keep it u8 only (or packed) to avoid padding issues.
>   */
>  struct bd70528_rtc_day {
>  	u8 sec;
> @@ -36,6 +37,13 @@ struct bd70528_rtc_wake {
>  	u8 ctrl;
>  } __packed;
>  
> +struct bd71828_rtc_alm {
> +	struct bd70528_rtc_data alm0;
> +	struct bd70528_rtc_data alm1;
> +	u8 alm_mask;
> +	u8 alm1_mask;
> +} __packed;
> +
>  struct bd70528_rtc_alm {
>  	struct bd70528_rtc_data data;
>  	u8 alm_mask;
> @@ -45,6 +53,8 @@ struct bd70528_rtc_alm {
>  struct bd70528_rtc {
>  	struct rohm_regmap_dev *mfd;
>  	struct device *dev;
> +	u8 reg_time_start;
> +	bool has_rtc_timers;
>  };
>  
>  static int bd70528_set_wake(struct rohm_regmap_dev *bd70528,
> @@ -152,12 +162,18 @@ static int bd70528_set_rtc_based_timers(struct bd70528_rtc *r, int new_state,
>  static int bd70528_re_enable_rtc_based_timers(struct bd70528_rtc *r,
>  					      int old_state)
>  {
> +	if (!r->has_rtc_timers)
> +		return 0;
> +
>  	return bd70528_set_rtc_based_timers(r, old_state, NULL);
>  }
>  
>  static int bd70528_disable_rtc_based_timers(struct bd70528_rtc *r,
>  					    int *old_state)
>  {
> +	if (!r->has_rtc_timers)
> +		return 0;
> +
>  	return bd70528_set_rtc_based_timers(r, 0, old_state);
>  }
>  
> @@ -213,6 +229,36 @@ static inline void rtc2tm(struct bd70528_rtc_data *r, struct rtc_time *t)
>  	t->tm_wday = bcd2bin(r->week & BD70528_MASK_RTC_WEEK);
>  }
>  
> +static int bd71828_set_alarm(struct device *dev, struct rtc_wkalrm *a)
> +{
> +	int ret;
> +	struct bd71828_rtc_alm alm;
> +	struct bd70528_rtc *r = dev_get_drvdata(dev);
> +	struct rohm_regmap_dev *bd71828 = r->mfd;
> +
> +	ret = regmap_bulk_read(bd71828->regmap, BD71828_REG_RTC_ALM_START,
> +			       &alm, sizeof(alm));
> +	if (ret) {
> +		dev_err(dev, "Failed to read alarm regs\n");
> +		return ret;
> +	}
> +
> +	tm2rtc(&a->time, &alm.alm0);
> +
> +	if (!a->enabled)
> +		alm.alm_mask &= ~BD70528_MASK_ALM_EN;
> +	else
> +		alm.alm_mask |= BD70528_MASK_ALM_EN;
> +
> +	ret = regmap_bulk_write(bd71828->regmap, BD71828_REG_RTC_ALM_START,
> +				&alm, sizeof(alm));
> +	if (ret)
> +		dev_err(dev, "Failed to set alarm time\n");
> +
> +	return ret;
> +
> +}
> +
>  static int bd70528_set_alarm(struct device *dev, struct rtc_wkalrm *a)
>  {
>  	struct bd70528_rtc_wake wake;
> @@ -261,6 +307,30 @@ static int bd70528_set_alarm(struct device *dev, struct rtc_wkalrm *a)
>  	return ret;
>  }
>  
> +static int bd71828_read_alarm(struct device *dev, struct rtc_wkalrm *a)
> +{
> +	int ret;
> +	struct bd71828_rtc_alm alm;
> +	struct bd70528_rtc *r = dev_get_drvdata(dev);
> +	struct rohm_regmap_dev *bd71828 = r->mfd;
> +
> +	ret = regmap_bulk_read(bd71828->regmap, BD71828_REG_RTC_ALM_START,
> +			       &alm, sizeof(alm));
> +	if (ret) {
> +		dev_err(dev, "Failed to read alarm regs\n");
> +		return ret;
> +	}
> +
> +	rtc2tm(&alm.alm0, &a->time);
> +	a->time.tm_mday = -1;
> +	a->time.tm_mon = -1;
> +	a->time.tm_year = -1;
> +	a->enabled = !!(alm.alm_mask & BD70528_MASK_ALM_EN);
> +	a->pending = 0;
> +
> +	return 0;
> +}
> +
>  static int bd70528_read_alarm(struct device *dev, struct rtc_wkalrm *a)
>  {
>  	struct bd70528_rtc_alm alm;
> @@ -297,7 +367,7 @@ static int bd70528_set_time_locked(struct device *dev, struct rtc_time *t)
>  		return ret;
>  
>  	tmpret = regmap_bulk_read(bd70528->regmap,
> -				  BD70528_REG_RTC_START, &rtc_data,
> +				  r->reg_time_start, &rtc_data,
>  				  sizeof(rtc_data));
>  	if (tmpret) {
>  		dev_err(dev, "Failed to read RTC time registers\n");
> @@ -306,7 +376,7 @@ static int bd70528_set_time_locked(struct device *dev, struct rtc_time *t)
>  	tm2rtc(t, &rtc_data);
>  
>  	tmpret = regmap_bulk_write(bd70528->regmap,
> -				   BD70528_REG_RTC_START, &rtc_data,
> +				   r->reg_time_start, &rtc_data,
>  				   sizeof(rtc_data));
>  	if (tmpret) {
>  		dev_err(dev, "Failed to set RTC time\n");
> @@ -321,6 +391,11 @@ static int bd70528_set_time_locked(struct device *dev, struct rtc_time *t)
>  	return ret;
>  }
>  
> +static int bd71828_set_time(struct device *dev, struct rtc_time *t)
> +{
> +	return bd70528_set_time_locked(dev, t);
> +}
> +
>  static int bd70528_set_time(struct device *dev, struct rtc_time *t)
>  {
>  	int ret;
> @@ -341,7 +416,7 @@ static int bd70528_get_time(struct device *dev, struct rtc_time *t)
>  
>  	/* read the RTC date and time registers all at once */
>  	ret = regmap_bulk_read(bd70528->regmap,
> -			       BD70528_REG_RTC_START, &rtc_data,
> +			       r->reg_time_start, &rtc_data,
>  			       sizeof(rtc_data));
>  	if (ret) {
>  		dev_err(dev, "Failed to read RTC time (err %d)\n", ret);
> @@ -378,6 +453,23 @@ static int bd70528_alm_enable(struct device *dev, unsigned int enabled)
>  	return ret;
>  }
>  
> +static int bd71828_alm_enable(struct device *dev, unsigned int enabled)
> +{
> +	int ret;
> +	struct bd70528_rtc *r = dev_get_drvdata(dev);
> +	unsigned int enableval = BD70528_MASK_ALM_EN;
> +
> +	if (!enabled)
> +		enableval = 0;
> +
> +	ret = regmap_update_bits(r->mfd->regmap, BD71828_REG_RTC_ALM0_MASK,
> +				 BD70528_MASK_ALM_EN, enableval);
> +	if (ret)
> +		dev_err(dev, "Failed to change alarm state\n");
> +
> +	return ret;
> +}
> +
>  static const struct rtc_class_ops bd70528_rtc_ops = {
>  	.read_time		= bd70528_get_time,
>  	.set_time		= bd70528_set_time,
> @@ -386,6 +478,14 @@ static const struct rtc_class_ops bd70528_rtc_ops = {
>  	.alarm_irq_enable	= bd70528_alm_enable,
>  };
>  
> +static const struct rtc_class_ops bd71828_rtc_ops = {
> +	.read_time		= bd70528_get_time,
> +	.set_time		= bd71828_set_time,
> +	.read_alarm		= bd71828_read_alarm,
> +	.set_alarm		= bd71828_set_alarm,
> +	.alarm_irq_enable	= bd71828_alm_enable,
> +};
> +
>  static irqreturn_t alm_hndlr(int irq, void *data)
>  {
>  	struct rtc_device *rtc = data;
> @@ -397,11 +497,16 @@ static irqreturn_t alm_hndlr(int irq, void *data)
>  static int bd70528_probe(struct platform_device *pdev)
>  {
>  	struct bd70528_rtc *bd_rtc;
> +	const struct rtc_class_ops *rtc_ops;
>  	struct rohm_regmap_dev *mfd;
> +	const char *irq_name;
>  	int ret;
>  	struct rtc_device *rtc;
>  	int irq;
>  	unsigned int hr;
> +	bool enable_main_irq = false;
> +	u8 hour_reg;
> +	enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data;
>  
>  	mfd = dev_get_drvdata(pdev->dev.parent);
>  	if (!mfd) {
> @@ -415,13 +520,36 @@ static int bd70528_probe(struct platform_device *pdev)
>  	bd_rtc->mfd = mfd;
>  	bd_rtc->dev = &pdev->dev;
>  
> -	irq = platform_get_irq_byname(pdev, "bd70528-rtc-alm");
> -	if (irq < 0)
> +	switch (chip) {
> +	case ROHM_CHIP_TYPE_BD70528:
> +		irq_name = "bd70528-rtc-alm";
> +		bd_rtc->has_rtc_timers = true;
> +		bd_rtc->reg_time_start = BD70528_REG_RTC_START;
> +		hour_reg = BD70528_REG_RTC_HOUR;
> +		enable_main_irq = true;
> +		rtc_ops = &bd70528_rtc_ops;
> +		break;
> +	case ROHM_CHIP_TYPE_BD71828:
> +		irq_name = "bd71828-rtc-alm-0";
> +		bd_rtc->reg_time_start = BD71828_REG_RTC_START;
> +		hour_reg = BD71828_REG_RTC_HOUR;
> +		rtc_ops = &bd71828_rtc_ops;
> +		break;
> +	default:
> +		dev_err(&pdev->dev, "Unknown chip\n");
> +		return -ENOENT;
> +	}
> +
> +	irq = platform_get_irq_byname(pdev, irq_name);
> +
> +	if (irq < 0) {
> +		dev_err(&pdev->dev, "Failed to get irq\n");
>  		return irq;
> +	}
>  
>  	platform_set_drvdata(pdev, bd_rtc);
>  
> -	ret = regmap_read(mfd->regmap, BD70528_REG_RTC_HOUR, &hr);
> +	ret = regmap_read(mfd->regmap, hour_reg, &hr);
>  
>  	if (ret) {
>  		dev_err(&pdev->dev, "Failed to reag RTC clock\n");
> @@ -431,10 +559,10 @@ static int bd70528_probe(struct platform_device *pdev)
>  	if (!(hr & BD70528_MASK_RTC_HOUR_24H)) {
>  		struct rtc_time t;
>  
> -		ret = bd70528_get_time(&pdev->dev, &t);
> +		ret = rtc_ops->read_time(&pdev->dev, &t);
>  
>  		if (!ret)
> -			ret = bd70528_set_time(&pdev->dev, &t);
> +			ret = rtc_ops->set_time(&pdev->dev, &t);
>  
>  		if (ret) {
>  			dev_err(&pdev->dev,
> @@ -454,7 +582,7 @@ static int bd70528_probe(struct platform_device *pdev)
>  
>  	rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
>  	rtc->range_max = RTC_TIMESTAMP_END_2099;
> -	rtc->ops = &bd70528_rtc_ops;
> +	rtc->ops = rtc_ops;
>  
>  	/* Request alarm IRQ prior to registerig the RTC */
>  	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, &alm_hndlr,
> @@ -468,27 +596,37 @@ static int bd70528_probe(struct platform_device *pdev)
>  	 *  leave them enabled as irq-controller should disable irqs
>  	 *  from sub-registers when IRQ is disabled or freed.
>  	 */
> -	ret = regmap_update_bits(mfd->regmap,
> +	if (enable_main_irq) {
> +		ret = regmap_update_bits(mfd->regmap,
>  				 BD70528_REG_INT_MAIN_MASK,
>  				 BD70528_INT_RTC_MASK, 0);
> -	if (ret) {
> -		dev_err(&pdev->dev, "Failed to enable RTC interrupts\n");
> -		return ret;
> +		if (ret) {
> +			dev_err(&pdev->dev, "Failed to enable RTC interrupts\n");
> +			return ret;
> +		}
>  	}
>  
>  	return rtc_register_device(rtc);
>  }
>  
> +static const struct platform_device_id bd718x7_rtc_id[] = {
> +	{ "bd70528-rtc", ROHM_CHIP_TYPE_BD70528 },
> +	{ "bd71828-rtc", ROHM_CHIP_TYPE_BD71828 },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(platform, bd718x7_rtc_id);
> +
>  static struct platform_driver bd70528_rtc = {
>  	.driver = {
>  		.name = "bd70528-rtc"
>  	},
>  	.probe = bd70528_probe,
> +	.id_table = bd718x7_rtc_id,
>  };
>  
>  module_platform_driver(bd70528_rtc);
>  
>  MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
> -MODULE_DESCRIPTION("BD70528 RTC driver");
> +MODULE_DESCRIPTION("ROHM BD70528 and BD71828 PMIC RTC driver");
>  MODULE_LICENSE("GPL");
>  MODULE_ALIAS("platform:bd70528-rtc");
> diff --git a/include/linux/mfd/rohm-bd70528.h b/include/linux/mfd/rohm-bd70528.h
> index 2ad2320d0a96..a57af878fd0c 100644
> --- a/include/linux/mfd/rohm-bd70528.h
> +++ b/include/linux/mfd/rohm-bd70528.h
> @@ -7,6 +7,7 @@
>  #include <linux/bits.h>
>  #include <linux/device.h>
>  #include <linux/mfd/rohm-generic.h>
> +#include <linux/mfd/rohm-shared.h>
>  #include <linux/regmap.h>
>  
>  enum {
> @@ -307,17 +308,6 @@ enum {
>  
>  /* RTC masks to mask out reserved bits */
>  
> -#define BD70528_MASK_RTC_SEC		0x7f
> -#define BD70528_MASK_RTC_MINUTE		0x7f
> -#define BD70528_MASK_RTC_HOUR_24H	0x80
> -#define BD70528_MASK_RTC_HOUR_PM	0x20
> -#define BD70528_MASK_RTC_HOUR		0x1f
> -#define BD70528_MASK_RTC_DAY		0x3f
> -#define BD70528_MASK_RTC_WEEK		0x07
> -#define BD70528_MASK_RTC_MONTH		0x1f
> -#define BD70528_MASK_RTC_YEAR		0xff
> -#define BD70528_MASK_RTC_COUNT_L	0x7f
> -
>  #define BD70528_MASK_ELAPSED_TIMER_EN	0x1
>  /* Mask second, min and hour fields
>   * HW would support ALM irq for over 24h
> @@ -326,7 +316,6 @@ enum {
>   * wake-up we limit ALM to 24H and only
>   * unmask sec, min and hour
>   */
> -#define BD70528_MASK_ALM_EN		0x7
>  #define BD70528_MASK_WAKE_EN		0x1
>  
>  /* WDT masks */
> diff --git a/include/linux/mfd/rohm-bd71828.h b/include/linux/mfd/rohm-bd71828.h
> index d013e03f742d..017a4c01cb31 100644
> --- a/include/linux/mfd/rohm-bd71828.h
> +++ b/include/linux/mfd/rohm-bd71828.h
> @@ -5,6 +5,7 @@
>  #define __LINUX_MFD_BD71828_H__
>  
>  #include <linux/mfd/rohm-generic.h>
> +#include <linux/mfd/rohm-shared.h>
>  
>  /* Regulator IDs */
>  enum {
> @@ -160,6 +161,7 @@ enum {
>  #define BD71828_REG_RTC_YEAR		0x52
>  
>  #define BD71828_REG_RTC_ALM0_SEC	0x53
> +#define BD71828_REG_RTC_ALM_START	BD71828_REG_RTC_ALM0_SEC
>  #define BD71828_REG_RTC_ALM0_MINUTE	0x54
>  #define BD71828_REG_RTC_ALM0_HOUR	0x55
>  #define BD71828_REG_RTC_ALM0_WEEK	0x56
> @@ -178,6 +180,7 @@ enum {
>  #define BD71828_REG_RTC_ALM1_MASK	0x62
>  
>  #define BD71828_REG_RTC_ALM2		0x63
> +#define BD71828_REG_RTC_START		BD71828_REG_RTC_SEC
>  
>  /* Charger/Battey */
>  #define BD71828_REG_CHG_STATE		0x65
> @@ -204,7 +207,6 @@ enum {
>  #define BD71828_REG_INT_MASK_TEMP	0xdd
>  #define BD71828_REG_INT_MASK_RTC	0xde
>  
> -
>  #define BD71828_REG_INT_MAIN		0xdf
>  #define BD71828_REG_INT_BUCK		0xe0
>  #define BD71828_REG_INT_DCIN1		0xe1
> diff --git a/include/linux/mfd/rohm-shared.h b/include/linux/mfd/rohm-shared.h
> new file mode 100644
> index 000000000000..f16fc3b5000e
> --- /dev/null
> +++ b/include/linux/mfd/rohm-shared.h
> @@ -0,0 +1,27 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/* Copyright (C) 2018 ROHM Semiconductors */
> +
> +
> +#ifndef __LINUX_MFD_ROHM_SHARED_H__
> +#define __LINUX_MFD_ROHM_SHARED_H__
> +
> +/*
> + * RTC definitions shared between
> + *
> + * BD70528
> + * and BD71828
> + */
> +
> +
> +#define BD70528_MASK_RTC_SEC		0x7f
> +#define BD70528_MASK_RTC_MINUTE	0x7f
> +#define BD70528_MASK_RTC_HOUR_24H	0x80
> +#define BD70528_MASK_RTC_HOUR_PM	0x20
> +#define BD70528_MASK_RTC_HOUR		0x3f
> +#define BD70528_MASK_RTC_DAY		0x3f
> +#define BD70528_MASK_RTC_WEEK		0x07
> +#define BD70528_MASK_RTC_MONTH		0x1f
> +#define BD70528_MASK_RTC_YEAR		0xff
> +#define BD70528_MASK_ALM_EN		0x7
> +
> +#endif /* __LINUX_MFD_ROHM_SHARED_H__ */
> -- 
> 2.21.0
> 
> 
> -- 
> Matti Vaittinen, Linux device drivers
> ROHM Semiconductors, Finland SWDC
> Kiviharjunlenkki 1E
> 90220 OULU
> FINLAND
> 
> ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
> Simon says - in Latin please.
> ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
> Thanks to Simon Glass for the translation =] 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

  reply	other threads:[~2019-12-11 11:38 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-11  9:33 [PATCH v6 00/15] Support ROHM BD71828 PMIC Matti Vaittinen
2019-12-11  9:35 ` [PATCH v6 01/15] dt-bindings: regulator: Document ROHM BD71282 regulator bindings Matti Vaittinen
2019-12-17 12:39   ` Applied "dt-bindings: regulator: Document ROHM BD71282 regulator bindings" to the regulator tree Mark Brown
2019-12-11  9:36 ` [PATCH v6 02/15] dt-bindings: leds: ROHM BD71282 PMIC LED driver Matti Vaittinen
2019-12-18 18:07   ` Rob Herring
2019-12-11  9:37 ` [PATCH v6 03/15] dt-bindings: mfd: Document ROHM BD71828 bindings Matti Vaittinen
2019-12-18 18:08   ` Rob Herring
2019-12-11  9:39 ` [PATCH v6 04/15] mfd: rohm PMICs - use platform_device_id to match MFD sub-devices Matti Vaittinen
2019-12-16 16:41   ` Lee Jones
2019-12-11  9:42 ` [PATCH v6 05/15] mfd: bd71828: Support ROHM BD71828 PMIC - core Matti Vaittinen
2019-12-16 16:46   ` Lee Jones
2019-12-17  9:39     ` Vaittinen, Matti
2019-12-17 13:54       ` Lee Jones
2019-12-17 14:08         ` gregkh
2019-12-17 14:25           ` Lee Jones
2019-12-11  9:43 ` [PATCH v6 06/15] mfd: input: bd71828: Add power-key support Matti Vaittinen
2019-12-11  9:43 ` [PATCH v6 07/15] clk: bd718x7: Support ROHM BD71828 clk block Matti Vaittinen
2019-12-16 16:47   ` Lee Jones
2019-12-11  9:44 ` [PATCH v6 08/15] regulator: bd718x7: Split driver to common and bd718x7 specific parts Matti Vaittinen
2019-12-18 13:12   ` Mark Brown
2019-12-18 17:27   ` Mark Brown
2019-12-11  9:46 ` [PATCH v6 09/15] regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators Matti Vaittinen
2019-12-16 14:55   ` Mark Brown
2019-12-17  6:56     ` Vaittinen, Matti
2019-12-17  9:15     ` Vaittinen, Matti
2019-12-17 12:39   ` Applied "regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators" to the regulator tree Mark Brown
2019-12-18  8:06     ` Vaittinen, Matti
2019-12-18 13:17       ` Mark Brown
2019-12-18 13:33         ` Vaittinen, Matti
2019-12-18 14:01         ` Vaittinen, Matti
2019-12-18 17:24           ` Mark Brown
2019-12-11  9:47 ` [PATCH v6 10/15] gpio: devres: Add devm_gpiod_get_parent_array Matti Vaittinen
2019-12-16  8:29   ` Linus Walleij
2019-12-16  8:59     ` Vaittinen, Matti
2019-12-16 12:21       ` Linus Walleij
2019-12-11  9:47 ` [PATCH v6 11/15] docs: driver-model: Add missing managed GPIO array get functions Matti Vaittinen
2019-12-16  8:31   ` Linus Walleij
2019-12-11  9:48 ` [PATCH v6 12/15] rtc: bd70528 add BD71828 support Matti Vaittinen
2019-12-11 11:38   ` Alexandre Belloni [this message]
2019-12-11 11:48     ` Vaittinen, Matti
2019-12-11  9:49 ` [PATCH v6 13/15] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs Matti Vaittinen
2019-12-16  8:32   ` Linus Walleij
2019-12-11 10:00 ` [PATCH v6 14/15] leds: Add common LED binding parsing support to LED class/core Matti Vaittinen
2019-12-11 10:02 ` [PATCH v6 15/15] led: bd71828: Support LED outputs on ROHM BD71828 PMIC Matti Vaittinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191211113828.GW1463890@piout.net \
    --to=alexandre.belloni@bootlin.com \
    --cc=a.zummo@towertech.it \
    --cc=arnd@arndb.de \
    --cc=bgolaszewski@baylibre.com \
    --cc=broonie@kernel.org \
    --cc=corbet@lwn.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jacek.anaszewski@gmail.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=matti.vaittinen@fi.rohmeurope.com \
    --cc=mazziesaccount@gmail.com \
    --cc=mchehab+samsung@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=noralf@tronnes.org \
    --cc=pavel@ucw.cz \
    --cc=phil.edworthy@renesas.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=wsa+renesas@sang-engineering.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).