From: Kars de Jong <jongk@linux-m68k.org>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Andreas 'count' Kotes"
<count-vger.kernel.org+linux-m68k@flatline.de>,
linux-m68k <linux-m68k@vger.kernel.org>
Subject: Re: Amiga PCMCIA network card support
Date: Tue, 29 Oct 2019 10:40:06 +0100 [thread overview]
Message-ID: <CACz-3rhJQ7JOpbfpR260RV0coRZui=yiyDFp7im1=QtPGgraMA@mail.gmail.com> (raw)
In-Reply-To: <CAMuHMdWdvHZ97Wh4PBfdO-Lz4QM3_ZoGah5p0SBJr8V-EcULGA@mail.gmail.com>
Hi Geert!
Op di 29 okt. 2019 om 10:00 schreef Geert Uytterhoeven <geert@linux-m68k.org>:
>
> Hi Kars,
>
> On Mon, Oct 28, 2019 at 8:02 PM Kars de Jong <jongk@linux-m68k.org> wrote:
> > I've dusted it off and powered it on this weekend. It still works (RTC
> > needs a new battery though), and the 2.6.18 kernel that I modified
> > many years ago still works fine with the pcnet_cs driver and my
> > Dynalink L10C card.
>
> You may want to have a close look at the electrolytic capacitors.
> A few months ago I had to repair some of the damage done by
> a leaking capacitor. Fortunately I don't need the signals on the
> parallel port, but I do use the serial console, and thus had to fix
> the eaten RXD trace.
Hmm, good one. I'll check them out.
Thanks,
Kars.
next prev parent reply other threads:[~2019-10-29 9:40 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-24 20:56 Amiga PCMCIA network card support Andreas 'count' Kotes
2019-10-25 7:25 ` Kars de Jong
2019-10-25 11:49 ` Andreas 'count' Kotes
2019-10-28 9:19 ` Kars de Jong
2019-10-28 11:08 ` John Paul Adrian Glaubitz
2019-10-28 13:00 ` Kars de Jong
2019-10-28 13:20 ` John Paul Adrian Glaubitz
2019-10-28 15:39 ` ESP SCSI driver (was: Amiga PCMCIA network card support) Kars de Jong
2019-10-28 18:32 ` Michael Schmitz
2019-10-29 9:37 ` Kars de Jong
2019-10-29 20:20 ` ESP SCSI driver Michael Schmitz
2019-10-29 22:05 ` [PATCH] esp_scsi: Add support for FSC chip Kars de Jong
2019-10-30 0:23 ` Michael Schmitz
2019-10-30 7:11 ` Kars de Jong
2019-10-30 18:42 ` Michael Schmitz
2019-10-30 0:31 ` Finn Thain
2019-10-30 1:06 ` Michael Schmitz
2019-10-30 7:25 ` Kars de Jong
2019-10-30 8:45 ` Geert Uytterhoeven
2019-10-30 9:08 ` Kars de Jong
2019-10-30 18:34 ` Michael Schmitz
2019-10-30 18:52 ` Brad Boyer
2019-10-30 7:22 ` Kars de Jong
2019-10-30 23:15 ` Finn Thain
2019-11-12 18:57 ` [PATCH 0/2] Some esp_scsi updates Kars de Jong
2019-11-12 18:57 ` [PATCH 1/2] esp_scsi: Correct ordering of PCSCSI definition in esp_rev enum Kars de Jong
2019-11-12 23:07 ` Finn Thain
2019-11-13 8:00 ` Kars de Jong
2019-11-13 22:25 ` Finn Thain
2019-11-13 14:22 ` Christoph Hellwig
2019-11-13 15:03 ` Kars de Jong
2019-11-12 18:57 ` [PATCH 2/2] esp_scsi: Add support for FSC chip Kars de Jong
2019-11-12 23:18 ` Finn Thain
2019-11-12 23:57 ` Finn Thain
2019-11-13 9:30 ` Kars de Jong
2019-11-13 22:24 ` Finn Thain
2019-11-14 21:59 ` [PATCH v2 0/2] Some esp_scsi updates Kars de Jong
2019-11-14 21:59 ` [PATCH 1/2] esp_scsi: Correct ordering of PCSCSI definition in esp_rev enum Kars de Jong
2019-11-14 22:06 ` Kars de Jong
2019-11-14 21:59 ` [PATCH 2/2] esp_scsi: Add support for FSC chip Kars de Jong
2019-11-14 22:07 ` Kars de Jong
2019-11-14 22:25 ` [PATCH v3 0/2] Some esp_scsi updates Kars de Jong
2019-11-14 22:25 ` [PATCH v2 1/2] esp_scsi: Correct ordering of PCSCSI definition in esp_rev enum Kars de Jong
2019-11-15 2:13 ` Finn Thain
2019-11-15 7:04 ` Kars de Jong
2019-11-14 22:25 ` [PATCH v3 2/2] esp_scsi: Add support for FSC chip Kars de Jong
2019-11-15 2:09 ` Finn Thain
2019-11-18 13:27 ` Kars de Jong
2019-11-09 19:14 ` [PATCH] zorro_esp: increase maximum dma length to 65536 bytes Kars de Jong
2019-11-09 20:12 ` James Bottomley
2019-11-10 2:36 ` Michael Schmitz
2019-11-10 9:01 ` Kars de Jong
2019-11-10 19:26 ` Michael Schmitz
2019-11-11 8:47 ` Kars de Jong
2019-11-10 19:35 ` James Bottomley
2019-11-12 17:55 ` [PATCH v2] zorro_esp: Limit DMA transfers to 65536 bytes (except on Fastlane) Kars de Jong
2019-11-12 22:46 ` Finn Thain
2019-11-13 2:27 ` Martin K. Petersen
2019-11-12 9:34 ` [PATCH] zorro_esp: increase maximum dma length to 65536 bytes Kars de Jong
2019-11-09 22:53 ` Finn Thain
2019-11-10 9:06 ` Kars de Jong
2019-10-28 23:38 ` ESP SCSI driver (was: Amiga PCMCIA network card support) Finn Thain
2019-10-29 11:52 ` Kars de Jong
2019-10-29 20:16 ` ESP SCSI driver Michael Schmitz
2019-10-28 22:31 ` Amiga PCMCIA network card support Finn Thain
2019-10-29 8:56 ` FOSDEM (was: Re: Amiga PCMCIA network card support) Geert Uytterhoeven
2019-10-29 9:13 ` John Paul Adrian Glaubitz
2019-10-28 22:08 ` Amiga PCMCIA network card support Finn Thain
2019-10-29 9:00 ` Geert Uytterhoeven
2019-10-29 9:12 ` John Paul Adrian Glaubitz
2019-10-29 9:14 ` Geert Uytterhoeven
2019-10-29 9:20 ` John Paul Adrian Glaubitz
2019-10-29 9:40 ` Kars de Jong [this message]
2019-10-28 6:57 ` Michael Schmitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CACz-3rhJQ7JOpbfpR260RV0coRZui=yiyDFp7im1=QtPGgraMA@mail.gmail.com' \
--to=jongk@linux-m68k.org \
--cc=count-vger.kernel.org+linux-m68k@flatline.de \
--cc=geert@linux-m68k.org \
--cc=linux-m68k@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).