From: Ken Sloat <KSloat@aampglobal.com>
To: "eugen.hristev@microchip.com" <eugen.hristev@microchip.com>
Cc: "mchehab@kernel.org" <mchehab@kernel.org>,
"nicolas.ferre@microchip.com" <nicolas.ferre@microchip.com>,
"alexandre.belloni@bootlin.com" <alexandre.belloni@bootlin.com>,
"ludovic.desroches@microchip.com"
<ludovic.desroches@microchip.com>,
"linux-media@vger.kernel.org" <linux-media@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>
Subject: [PATCH v2 1/2] media: atmel-isc: Add support for BT656 with CRC decoding
Date: Fri, 18 Jan 2019 14:28:16 +0000 [thread overview]
Message-ID: <20190118142803.70160-1-ksloat@aampglobal.com> (raw)
From: Ken Sloat <ksloat@aampglobal.com>
The ISC driver currently supports ITU-R 601 encoding which
utilizes the external hysync and vsync signals. ITU-R 656
format removes the need for these pins by embedding the
sync pulses within the data packet.
To support this feature, enable necessary register bits
when this feature is enabled via device tree.
Signed-off-by: Ken Sloat <ksloat@aampglobal.com>
---
drivers/media/platform/atmel/atmel-isc-regs.h | 2 ++
drivers/media/platform/atmel/atmel-isc.c | 7 ++++++-
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/atmel/atmel-isc-regs.h b/drivers/media/platform/atmel/atmel-isc-regs.h
index 2aadc19235ea..d730693f299c 100644
--- a/drivers/media/platform/atmel/atmel-isc-regs.h
+++ b/drivers/media/platform/atmel/atmel-isc-regs.h
@@ -24,6 +24,8 @@
#define ISC_PFE_CFG0_HPOL_LOW BIT(0)
#define ISC_PFE_CFG0_VPOL_LOW BIT(1)
#define ISC_PFE_CFG0_PPOL_LOW BIT(2)
+#define ISC_PFE_CFG0_CCIR656 BIT(9)
+#define ISC_PFE_CFG0_CCIR_CRC BIT(10)
#define ISC_PFE_CFG0_MODE_PROGRESSIVE (0x0 << 4)
#define ISC_PFE_CFG0_MODE_MASK GENMASK(6, 4)
diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
index 50178968b8a6..9a399aa7ca92 100644
--- a/drivers/media/platform/atmel/atmel-isc.c
+++ b/drivers/media/platform/atmel/atmel-isc.c
@@ -1095,7 +1095,8 @@ static int isc_configure(struct isc_device *isc)
pfe_cfg0 |= subdev->pfe_cfg0 | ISC_PFE_CFG0_MODE_PROGRESSIVE;
mask = ISC_PFE_CFG0_BPS_MASK | ISC_PFE_CFG0_HPOL_LOW |
ISC_PFE_CFG0_VPOL_LOW | ISC_PFE_CFG0_PPOL_LOW |
- ISC_PFE_CFG0_MODE_MASK;
+ ISC_PFE_CFG0_MODE_MASK | ISC_PFE_CFG0_CCIR_CRC |
+ ISC_PFE_CFG0_CCIR656;
regmap_update_bits(regmap, ISC_PFE_CFG0, mask, pfe_cfg0);
@@ -2084,6 +2085,10 @@ static int isc_parse_dt(struct device *dev, struct isc_device *isc)
if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_PPOL_LOW;
+ if (v4l2_epn.bus_type == V4L2_MBUS_BT656)
+ subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_CCIR_CRC |
+ ISC_PFE_CFG0_CCIR656;
+
subdev_entity->asd->match_type = V4L2_ASYNC_MATCH_FWNODE;
subdev_entity->asd->match.fwnode =
of_fwnode_handle(rem);
--
2.17.1
next reply other threads:[~2019-01-18 14:29 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-18 14:28 Ken Sloat [this message]
2019-01-18 14:28 ` [PATCH v2 2/2] media: atmel-isc: Update device tree binding documentation Ken Sloat
2019-01-18 14:39 ` Eugen.Hristev
2019-01-18 18:05 ` Ken Sloat
2019-01-21 7:43 ` Eugen.Hristev
2019-01-23 12:45 ` Sakari Ailus
2019-01-29 20:22 ` Ken Sloat
2019-01-30 10:51 ` Sakari Ailus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190118142803.70160-1-ksloat@aampglobal.com \
--to=ksloat@aampglobal.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=eugen.hristev@microchip.com \
--cc=linux-media@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=mchehab@kernel.org \
--cc=nicolas.ferre@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).