From: Richard Zhu <hongxing.zhu@nxp.com>
To: l.stach@pengutronix.de, bhelgaas@google.com, robh+dt@kernel.org,
broonie@kernel.org, lorenzo.pieralisi@arm.com,
jingoohan1@gmail.com, festevam@gmail.com,
francesco.dolcini@toradex.com
Cc: hongxing.zhu@nxp.com, linux-pci@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
linux-imx@nxp.com
Subject: [PATCH v9 5/8] PCI: imx6: Refine the regulator usage
Date: Fri, 6 May 2022 09:47:06 +0800 [thread overview]
Message-ID: <1651801629-30223-6-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1651801629-30223-1-git-send-email-hongxing.zhu@nxp.com>
The driver should undo any enables it did itself. The regulator disable
shouldn't be basing decisions on regulator_is_enabled().
To keep the balance of the regulator usage counter, disable the regulator
just behind of imx6_pcie_assert_core_reset() in resume and shutdown.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 19 +++++++------------
1 file changed, 7 insertions(+), 12 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 7005a7910003..3ce3993d5797 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -369,8 +369,6 @@ static int imx6_pcie_attach_pd(struct device *dev)
static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
{
- struct device *dev = imx6_pcie->pci->dev;
-
switch (imx6_pcie->drvdata->variant) {
case IMX7D:
case IMX8MQ:
@@ -400,14 +398,6 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
break;
}
-
- if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
- int ret = regulator_disable(imx6_pcie->vpcie);
-
- if (ret)
- dev_err(dev, "failed to disable vpcie regulator: %d\n",
- ret);
- }
}
static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
@@ -580,7 +570,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
struct device *dev = pci->dev;
int ret, err;
- if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
+ if (imx6_pcie->vpcie) {
ret = regulator_enable(imx6_pcie->vpcie);
if (ret) {
dev_err(dev, "failed to enable vpcie regulator: %d\n",
@@ -653,7 +643,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
return 0;
err_clks:
- if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
+ if (imx6_pcie->vpcie) {
ret = regulator_disable(imx6_pcie->vpcie);
if (ret)
dev_err(dev, "failed to disable vpcie regulator: %d\n",
@@ -1026,6 +1016,9 @@ static int imx6_pcie_resume_noirq(struct device *dev)
return 0;
imx6_pcie_assert_core_reset(imx6_pcie);
+ if (imx6_pcie->vpcie)
+ regulator_disable(imx6_pcie->vpcie);
+
imx6_pcie_init_phy(imx6_pcie);
imx6_pcie_deassert_core_reset(imx6_pcie);
dw_pcie_setup_rc(pp);
@@ -1259,6 +1252,8 @@ static void imx6_pcie_shutdown(struct platform_device *pdev)
/* bring down link, so bootloader gets clean state in case of reboot */
imx6_pcie_assert_core_reset(imx6_pcie);
+ if (imx6_pcie->vpcie)
+ regulator_disable(imx6_pcie->vpcie);
}
static const struct imx6_pcie_drvdata drvdata[] = {
--
2.25.1
next prev parent reply other threads:[~2022-05-06 1:59 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-06 1:47 [PATCH v9 0/8] PCI: imx6: refine codes and add compliance tests mode support Richard Zhu
2022-05-06 1:47 ` [PATCH v9 1/8] PCI: imx6: Encapsulate the clock enable into one standalone function Richard Zhu
2022-06-08 18:51 ` Bjorn Helgaas
2022-06-09 6:18 ` Hongxing Zhu
2022-05-06 1:47 ` [PATCH v9 2/8] PCI: imx6: Add the error propagation from host_init Richard Zhu
2022-06-08 18:53 ` Bjorn Helgaas
2022-06-09 6:19 ` Hongxing Zhu
2022-05-06 1:47 ` [PATCH v9 3/8] PCI: imx6: Move imx6_pcie_clk_disable() earlier Richard Zhu
2022-06-08 7:14 ` Lucas Stach
2022-05-06 1:47 ` [PATCH v9 4/8] PCI: imx6: Disable iMX6QDL PCIe REF clock when disable PCIe clocks Richard Zhu
2022-06-08 7:18 ` Lucas Stach
2022-05-06 1:47 ` Richard Zhu [this message]
2022-06-08 7:26 ` [PATCH v9 5/8] PCI: imx6: Refine the regulator usage Lucas Stach
2022-06-09 6:17 ` Hongxing Zhu
2022-06-09 7:47 ` Lucas Stach
2022-06-09 7:54 ` Hongxing Zhu
2022-06-08 18:54 ` Bjorn Helgaas
2022-06-09 6:19 ` Hongxing Zhu
2022-06-09 17:20 ` Bjorn Helgaas
2022-06-10 7:09 ` Hongxing Zhu
2022-05-06 1:47 ` [PATCH v9 6/8] PCI: imx6: Disable clocks and regulators after link is down Richard Zhu
2022-06-08 7:35 ` Lucas Stach
2022-06-09 6:17 ` Hongxing Zhu
2022-06-09 7:53 ` Francesco Dolcini
2022-06-09 8:36 ` Hongxing Zhu
2022-06-09 7:55 ` Lucas Stach
2022-06-09 8:30 ` Hongxing Zhu
2022-05-06 1:47 ` [PATCH v9 7/8] PCI: imx6: Move the phy driver callbacks to the proper places Richard Zhu
2022-06-08 7:44 ` Lucas Stach
2022-06-09 6:18 ` Hongxing Zhu
2022-06-08 18:57 ` Bjorn Helgaas
2022-06-09 6:20 ` Hongxing Zhu
2022-06-09 16:25 ` Bjorn Helgaas
2022-06-10 6:51 ` Hongxing Zhu
2022-05-06 1:47 ` [PATCH v9 8/8] PCI: imx6: Add compliance tests mode support Richard Zhu
2022-06-08 7:48 ` Lucas Stach
2022-06-09 6:18 ` Hongxing Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1651801629-30223-6-git-send-email-hongxing.zhu@nxp.com \
--to=hongxing.zhu@nxp.com \
--cc=bhelgaas@google.com \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=francesco.dolcini@toradex.com \
--cc=jingoohan1@gmail.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).