linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hongxing Zhu <hongxing.zhu@nxp.com>
To: Lucas Stach <l.stach@pengutronix.de>,
	"bhelgaas@google.com" <bhelgaas@google.com>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"broonie@kernel.org" <broonie@kernel.org>,
	"lorenzo.pieralisi@arm.com" <lorenzo.pieralisi@arm.com>,
	"jingoohan1@gmail.com" <jingoohan1@gmail.com>,
	"festevam@gmail.com" <festevam@gmail.com>,
	"francesco.dolcini@toradex.com" <francesco.dolcini@toradex.com>
Cc: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"kernel@pengutronix.de" <kernel@pengutronix.de>,
	dl-linux-imx <linux-imx@nxp.com>
Subject: RE: [PATCH v9 5/8] PCI: imx6: Refine the regulator usage
Date: Thu, 9 Jun 2022 06:17:34 +0000	[thread overview]
Message-ID: <AS8PR04MB8676708D899DCE93F14A28DB8CA79@AS8PR04MB8676.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <2427cef355dc1b9d1667a2c80448d2e23b97c447.camel@pengutronix.de>

> -----Original Message-----
> From: Lucas Stach <l.stach@pengutronix.de>
> Sent: 2022年6月8日 15:27
> To: Hongxing Zhu <hongxing.zhu@nxp.com>; bhelgaas@google.com;
> robh+dt@kernel.org; broonie@kernel.org; lorenzo.pieralisi@arm.com;
> jingoohan1@gmail.com; festevam@gmail.com;
> francesco.dolcini@toradex.com
> Cc: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; kernel@pengutronix.de; dl-linux-imx
> <linux-imx@nxp.com>
> Subject: Re: [PATCH v9 5/8] PCI: imx6: Refine the regulator usage
> 
> Am Freitag, dem 06.05.2022 um 09:47 +0800 schrieb Richard Zhu:
> > The driver should undo any enables it did itself. The regulator
> > disable shouldn't be basing decisions on regulator_is_enabled().
> >
> > To keep the balance of the regulator usage counter, disable the
> > regulator just behind of imx6_pcie_assert_core_reset() in resume and
> shutdown.
> >
> > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> > ---
> >  drivers/pci/controller/dwc/pci-imx6.c | 19 +++++++------------
> >  1 file changed, 7 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-imx6.c
> > b/drivers/pci/controller/dwc/pci-imx6.c
> > index 7005a7910003..3ce3993d5797 100644
> > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > @@ -369,8 +369,6 @@ static int imx6_pcie_attach_pd(struct device *dev)
> >
> >  static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
> > {
> > -	struct device *dev = imx6_pcie->pci->dev;
> > -
> >  	switch (imx6_pcie->drvdata->variant) {
> >  	case IMX7D:
> >  	case IMX8MQ:
> > @@ -400,14 +398,6 @@ static void imx6_pcie_assert_core_reset(struct
> imx6_pcie *imx6_pcie)
> >  				   IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
> >  		break;
> >  	}
> > -
> > -	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
> > -		int ret = regulator_disable(imx6_pcie->vpcie);
> > -
> > -		if (ret)
> > -			dev_err(dev, "failed to disable vpcie regulator: %d\n",
> > -				ret);
> > -	}
> >  }
> >
> >  static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie
> > *imx6_pcie) @@ -580,7 +570,7 @@ static int
> imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> >  	struct device *dev = pci->dev;
> >  	int ret, err;
> >
> > -	if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
> > +	if (imx6_pcie->vpcie) {
> >  		ret = regulator_enable(imx6_pcie->vpcie);
> >  		if (ret) {
> >  			dev_err(dev, "failed to enable vpcie regulator: %d\n", @@
> -653,7
> > +643,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie
> *imx6_pcie)
> >  	return 0;
> >
> >  err_clks:
> > -	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
> > +	if (imx6_pcie->vpcie) {
> >  		ret = regulator_disable(imx6_pcie->vpcie);
> >  		if (ret)
> >  			dev_err(dev, "failed to disable vpcie regulator: %d\n", @@
> -1026,6
> > +1016,9 @@ static int imx6_pcie_resume_noirq(struct device *dev)
> >  		return 0;
> >
> >  	imx6_pcie_assert_core_reset(imx6_pcie);
> > +	if (imx6_pcie->vpcie)
> > +		regulator_disable(imx6_pcie->vpcie);
> > +
> This one looks misplaced. Surely you want the regulator to be on when
> resuming the PCIe subsystem. Isn't this just papering over a wrong usage count
> here, because there is no regulator_disable in imx6_pcie_suspend_noirq,
> where I would expect this to happen?
> 
Hi Lucas:
Thanks for your comments.
There was one regulator_disable() operation at the end of the
 imx6_pcie_assert_core_reset() function before.
When create the 5/8 patch, I follow the same behavior to disable the
regulator just behind the imx6_pcie_assert_core_reset() function.

Yes, it is. Imx6_pcie_suspend_noirq doesn't have the regulator_disable.
The regulaor_enable is contained in imx6_pcie_deassert_core_reset().
Both of the regulator_disable and regulator_enabe are invoked once in
 imx6_pcie_resume_noirq.
So, the regulator is on and has a balanced usage count after resume.
Best Regards
Richard Zhu

> Regards,
> Lucas
> 
> >  	imx6_pcie_init_phy(imx6_pcie);
> >  	imx6_pcie_deassert_core_reset(imx6_pcie);
> >  	dw_pcie_setup_rc(pp);
> > @@ -1259,6 +1252,8 @@ static void imx6_pcie_shutdown(struct
> > platform_device *pdev)
> >
> >  	/* bring down link, so bootloader gets clean state in case of reboot */
> >  	imx6_pcie_assert_core_reset(imx6_pcie);
> > +	if (imx6_pcie->vpcie)
> > +		regulator_disable(imx6_pcie->vpcie);
> >  }
> >
> >  static const struct imx6_pcie_drvdata drvdata[] = {
> 


  reply	other threads:[~2022-06-09  6:17 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-06  1:47 [PATCH v9 0/8] PCI: imx6: refine codes and add compliance tests mode support Richard Zhu
2022-05-06  1:47 ` [PATCH v9 1/8] PCI: imx6: Encapsulate the clock enable into one standalone function Richard Zhu
2022-06-08 18:51   ` Bjorn Helgaas
2022-06-09  6:18     ` Hongxing Zhu
2022-05-06  1:47 ` [PATCH v9 2/8] PCI: imx6: Add the error propagation from host_init Richard Zhu
2022-06-08 18:53   ` Bjorn Helgaas
2022-06-09  6:19     ` Hongxing Zhu
2022-05-06  1:47 ` [PATCH v9 3/8] PCI: imx6: Move imx6_pcie_clk_disable() earlier Richard Zhu
2022-06-08  7:14   ` Lucas Stach
2022-05-06  1:47 ` [PATCH v9 4/8] PCI: imx6: Disable iMX6QDL PCIe REF clock when disable PCIe clocks Richard Zhu
2022-06-08  7:18   ` Lucas Stach
2022-05-06  1:47 ` [PATCH v9 5/8] PCI: imx6: Refine the regulator usage Richard Zhu
2022-06-08  7:26   ` Lucas Stach
2022-06-09  6:17     ` Hongxing Zhu [this message]
2022-06-09  7:47       ` Lucas Stach
2022-06-09  7:54         ` Hongxing Zhu
2022-06-08 18:54   ` Bjorn Helgaas
2022-06-09  6:19     ` Hongxing Zhu
2022-06-09 17:20       ` Bjorn Helgaas
2022-06-10  7:09         ` Hongxing Zhu
2022-05-06  1:47 ` [PATCH v9 6/8] PCI: imx6: Disable clocks and regulators after link is down Richard Zhu
2022-06-08  7:35   ` Lucas Stach
2022-06-09  6:17     ` Hongxing Zhu
2022-06-09  7:53       ` Francesco Dolcini
2022-06-09  8:36         ` Hongxing Zhu
2022-06-09  7:55       ` Lucas Stach
2022-06-09  8:30         ` Hongxing Zhu
2022-05-06  1:47 ` [PATCH v9 7/8] PCI: imx6: Move the phy driver callbacks to the proper places Richard Zhu
2022-06-08  7:44   ` Lucas Stach
2022-06-09  6:18     ` Hongxing Zhu
2022-06-08 18:57   ` Bjorn Helgaas
2022-06-09  6:20     ` Hongxing Zhu
2022-06-09 16:25       ` Bjorn Helgaas
2022-06-10  6:51         ` Hongxing Zhu
2022-05-06  1:47 ` [PATCH v9 8/8] PCI: imx6: Add compliance tests mode support Richard Zhu
2022-06-08  7:48   ` Lucas Stach
2022-06-09  6:18     ` Hongxing Zhu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AS8PR04MB8676708D899DCE93F14A28DB8CA79@AS8PR04MB8676.eurprd04.prod.outlook.com \
    --to=hongxing.zhu@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=broonie@kernel.org \
    --cc=festevam@gmail.com \
    --cc=francesco.dolcini@toradex.com \
    --cc=jingoohan1@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).