linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <Claudiu.Beznea@microchip.com>
To: <Varshini.Rajendran@microchip.com>, <tglx@linutronix.de>,
	<maz@kernel.org>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
	<Nicolas.Ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
	<pabeni@redhat.com>, <gregkh@linuxfoundation.org>,
	<linux@armlinux.org.uk>, <mturquette@baylibre.com>,
	<sboyd@kernel.org>, <sre@kernel.org>, <broonie@kernel.org>,
	<arnd@arndb.de>, <gregory.clement@bootlin.com>,
	<sudeep.holla@arm.com>, <Balamanikandan.Gunasundar@microchip.com>,
	<Mihai.Sain@microchip.com>, <linux-kernel@vger.kernel.org>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <netdev@vger.kernel.org>,
	<linux-usb@vger.kernel.org>, <linux-clk@vger.kernel.org>,
	<linux-pm@vger.kernel.org>
Cc: <Hari.PrasathGE@microchip.com>, <Cristian.Birsan@microchip.com>,
	<Durai.ManickamKR@microchip.com>, <Manikandan.M@microchip.com>,
	<Dharma.B@microchip.com>, <Nayabbasha.Sayed@microchip.com>,
	<Balakrishnan.S@microchip.com>
Subject: Re: [PATCH 14/21] clk: at91: sam9x7: add sam9x7 pmc driver
Date: Thu, 15 Jun 2023 08:39:28 +0000	[thread overview]
Message-ID: <74e78c5a-8e77-7d70-2a1b-f2a8343fdcf7@microchip.com> (raw)
In-Reply-To: <20230603200243.243878-15-varshini.rajendran@microchip.com>

On 03.06.2023 23:02, Varshini Rajendran wrote:
> Add a driver for the PMC clocks of sam9x7 Soc family

End the statement with a dot. Valid for commit messages of the other
patches in this series.

> 
> Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
> ---
>  drivers/clk/at91/Makefile |   1 +
>  drivers/clk/at91/sam9x7.c | 947 ++++++++++++++++++++++++++++++++++++++
>  2 files changed, 948 insertions(+)
>  create mode 100644 drivers/clk/at91/sam9x7.c
> 
> diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
> index 89061b85e7d2..8e3684ba2c74 100644
> --- a/drivers/clk/at91/Makefile
> +++ b/drivers/clk/at91/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o at91sam9rl.o at91sam9x5.o dt-compat.
>  obj-$(CONFIG_SOC_AT91SAM9) += at91sam9g45.o dt-compat.o
>  obj-$(CONFIG_SOC_AT91SAM9) += at91sam9n12.o at91sam9x5.o dt-compat.o
>  obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o
> +obj-$(CONFIG_SOC_SAM9X7) += sam9x7.o
>  obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o dt-compat.o
>  obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o dt-compat.o
>  obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o dt-compat.o
> diff --git a/drivers/clk/at91/sam9x7.c b/drivers/clk/at91/sam9x7.c
> new file mode 100644
> index 000000000000..8232a2af14be
> --- /dev/null
> +++ b/drivers/clk/at91/sam9x7.c
> @@ -0,0 +1,947 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * SAM9X7 PMC code.
> + *
> + * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries

2023?

> + *
> + * Author: Varshini Rajendran <varshini.rajendran@microchip.com>
> + *
> + */
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/slab.h>
> +
> +#include <dt-bindings/clock/at91.h>
> +
> +#include "pmc.h"
> +
> +#define SAM9X7_INIT_TABLE(_table, _count)		\
> +	do {						\
> +		u8 _i;					\
> +		for (_i = 0; _i < (_count); _i++)	\
> +			(_table)[_i] = _i;		\
> +	} while (0)
> +
> +#define SAM9X7_FILL_TABLE(_to, _from, _count)		\
> +	do {						\
> +		u8 _i;					\
> +		for (_i = 0; _i < (_count); _i++) {	\
> +			(_to)[_i] = (_from)[_i];	\
> +		}					\
> +	} while (0)

Something similar is used on SAMA7G5. It could be export it in pmc.h

> +
> +static DEFINE_SPINLOCK(pmc_pll_lock);
> +static DEFINE_SPINLOCK(mck_lock);
> +
> +/**
> + * enum pll_ids - PLL clocks identifiers
> + * @PLL_ID_PLLA:	PLLA identifier
> + * @PLL_ID_UPLL:	UPLL identifier
> + * @PLL_ID_AUDIO:	Audio PLL identifier
> + * @PLL_ID_LVDS:	LVDS PLL identifier
> + * @PLL_ID_PLLA_DIV2:	PLLA DIV2 identifier
> + * @PLL_ID_MAX:		Max PLL Identifier
> + */
> +enum pll_ids {
> +	PLL_ID_PLLA,
> +	PLL_ID_UPLL,
> +	PLL_ID_AUDIO,
> +	PLL_ID_LVDS,
> +	PLL_ID_PLLA_DIV2,
> +	PLL_ID_MAX,
> +};
> +
> +/**
> + * enum pll_type - PLL type identifiers
> + * @PLL_TYPE_FRAC:	fractional PLL identifier
> + * @PLL_TYPE_DIV:	divider PLL identifier
> + */
> +enum pll_type {
> +	PLL_TYPE_FRAC,
> +	PLL_TYPE_DIV,
> +};
> +
> +static const struct clk_master_characteristics mck_characteristics = {
> +	.output = { .min = 32000000, .max = 266666667 },
> +	.divisors = { 1, 2, 4, 3 },

5 is also available in datasheet here:
https://ww1.microchip.com/downloads/aemDocuments/documents/MPU32/ProductDocuments/DataSheets/SAM9X7-Series-Data-Sheet-DS60001813.pdf

> +	.have_div3_pres = 1,
> +};
> +
> +static const struct clk_master_layout sam9x7_master_layout = {
> +	.mask = 0x373,
> +	.pres_shift = 4,
> +	.offset = 0x28,
> +};
> +
> +/* Fractional PLL core output range. */
> +static const struct clk_range plla_core_outputs[] = {
> +	{ .min = 375000000, .max = 1600000000 },
> +};
> +
> +static const struct clk_range upll_core_outputs[] = {
> +	{ .min = 600000000, .max = 1200000000 },
> +};
> +
> +static const struct clk_range lvdspll_core_outputs[] = {
> +	{ .min = 400000000, .max = 800000000 },
> +};
> +
> +static const struct clk_range audiopll_core_outputs[] = {
> +	{ .min = 400000000, .max = 800000000 },
> +};
> +
> +static const struct clk_range plladiv2_core_outputs[] = {
> +	{ .min = 375000000, .max = 1600000000 },
> +};
> +
> +/* Fractional PLL output range. */
> +static const struct clk_range plla_outputs[] = {
> +	{ .min = 732421, .max = 800000000 },
> +};
> +
> +static const struct clk_range upll_outputs[] = {
> +	{ .min = 300000000, .max = 600000000 },
> +};
> +
> +static const struct clk_range lvdspll_outputs[] = {
> +	{ .min = 10000000, .max = 800000000 },
> +};
> +
> +static const struct clk_range audiopll_outputs[] = {
> +	{ .min = 10000000, .max = 800000000 },
> +};
> +
> +static const struct clk_range plladiv2_outputs[] = {
> +	{ .min = 366210, .max = 400000000 },
> +};
> +
> +/* PLL characteristics. */
> +static const struct clk_pll_characteristics plla_characteristics = {
> +	.input = { .min = 20000000, .max = 50000000 },
> +	.num_output = ARRAY_SIZE(plla_outputs),
> +	.output = plla_outputs,
> +	.core_output = plla_core_outputs,
> +};
> +
> +static const struct clk_pll_characteristics upll_characteristics = {
> +	.input = { .min = 20000000, .max = 50000000 },
> +	.num_output = ARRAY_SIZE(upll_outputs),
> +	.output = upll_outputs,
> +	.core_output = upll_core_outputs,
> +	.upll = true,
> +};
> +
> +static const struct clk_pll_characteristics lvdspll_characteristics = {
> +	.input = { .min = 20000000, .max = 50000000 },
> +	.num_output = ARRAY_SIZE(lvdspll_outputs),
> +	.output = lvdspll_outputs,
> +	.core_output = lvdspll_core_outputs,
> +};
> +
> +static const struct clk_pll_characteristics audiopll_characteristics = {
> +	.input = { .min = 20000000, .max = 50000000 },
> +	.num_output = ARRAY_SIZE(audiopll_outputs),
> +	.output = audiopll_outputs,
> +	.core_output = audiopll_core_outputs,
> +};
> +
> +static const struct clk_pll_characteristics plladiv2_characteristics = {
> +	.input = { .min = 20000000, .max = 50000000 },
> +	.num_output = ARRAY_SIZE(plladiv2_outputs),
> +	.output = plladiv2_outputs,
> +	.core_output = plladiv2_core_outputs,
> +};
> +
> +/* Layout for fractional PLL ID PLLA. */
> +static const struct clk_pll_layout plla_frac_layout = {
> +	.mul_mask = GENMASK(31, 24),
> +	.frac_mask = GENMASK(21, 0),
> +	.mul_shift = 24,
> +	.frac_shift = 0,
> +	.div2 = 1,
> +};
> +
> +/* Layout for fractional PLLs. */
> +static const struct clk_pll_layout pll_frac_layout = {
> +	.mul_mask = GENMASK(31, 24),
> +	.frac_mask = GENMASK(21, 0),
> +	.mul_shift = 24,
> +	.frac_shift = 0,
> +};
> +
> +/* Layout for DIV PLLs. */
> +static const struct clk_pll_layout pll_divpmc_layout = {
> +	.div_mask = GENMASK(7, 0),
> +	.endiv_mask = BIT(29),
> +	.div_shift = 0,
> +	.endiv_shift = 29,
> +};
> +
> +/* Layout for DIV PLL ID PLLADIV2. */
> +static const struct clk_pll_layout plladiv2_divpmc_layout = {
> +	.div_mask = GENMASK(7, 0),
> +	.endiv_mask = BIT(29),
> +	.div_shift = 0,
> +	.endiv_shift = 29,
> +	.div2 = 1,
> +};
> +
> +/* Layout for DIVIO dividers. */
> +static const struct clk_pll_layout pll_divio_layout = {
> +	.div_mask	= GENMASK(19, 12),
> +	.endiv_mask	= BIT(30),
> +	.div_shift	= 12,
> +	.endiv_shift	= 30,
> +};
> +
> +/*
> + * PLL clocks description
> + * @n:		clock name
> + * @p:		clock parent
> + * @l:		clock layout
> + * @t:		clock type
> + * @c:		pll characteristics
> + * @f:		true if clock is critical and cannot be disabled
> + * @eid:	export index in sam9x7->chws[] array
> + */
> +static const struct {
> +	const char *n;
> +	const char *p;
> +	const struct clk_pll_layout *l;
> +	u8 t;
> +	const struct clk_pll_characteristics *c;
> +	unsigned long f;
> +	u8 eid;
> +} sam9x7_plls[][PLL_ID_MAX] = {
> +	[PLL_ID_PLLA] = {
> +		{
> +			.n = "plla_fracck",
> +			.p = "mainck",
> +			.l = &plla_frac_layout,
> +			.t = PLL_TYPE_FRAC,

Add here a comment about the necessity of having CLK_IS_CRITICAL. Same for
the other places where CLK_IS_CRITICAL is used.

> +			.f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE,
> +			.c = &plla_characteristics,
> +		},
> +
> +		{
> +			.n = "plla_divpmcck",
> +			.p = "plla_fracck",
> +			.l = &pll_divpmc_layout,
> +			.t = PLL_TYPE_DIV,
> +			.f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE,
> +			.eid = PMC_PLLACK,
> +			.c = &plla_characteristics,
> +		},
> +	},
> +
> +	[PLL_ID_UPLL] = {
> +		{
> +			.n = "upll_fracck",
> +			.p = "main_osc",
> +			.l = &pll_frac_layout,
> +			.t = PLL_TYPE_FRAC,
> +			.f = CLK_SET_RATE_GATE,
> +			.c = &upll_characteristics,
> +		},
> +
> +		{
> +			.n = "upll_divpmcck",
> +			.p = "upll_fracck",
> +			.l = &pll_divpmc_layout,
> +			.t = PLL_TYPE_DIV,
> +			.f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
> +			     CLK_SET_RATE_PARENT,
> +			.eid = PMC_UTMI,
> +			.c = &upll_characteristics,
> +		},
> +	},
> +
> +	[PLL_ID_AUDIO] = {
> +		{
> +			.n = "audiopll_fracck",
> +			.p = "main_osc",
> +			.l = &pll_frac_layout,
> +			.f = CLK_SET_RATE_GATE,
> +			.c = &audiopll_characteristics,
> +			.t = PLL_TYPE_FRAC,
> +		},
> +
> +		{
> +			.n = "audiopll_divpmcck",
> +			.p = "audiopll_fracck",
> +			.l = &pll_divpmc_layout,
> +			.f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
> +			     CLK_SET_RATE_PARENT,
> +			.c = &audiopll_characteristics,
> +			.t = PLL_TYPE_DIV,
> +		},
> +
> +		{
> +			.n = "audiopll_diviock",
> +			.p = "audiopll_fracck",
> +			.l = &pll_divio_layout,
> +			.f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
> +			     CLK_SET_RATE_PARENT,
> +			.c = &audiopll_characteristics,
> +			.t = PLL_TYPE_DIV,
> +		},
> +	},
> +
> +	[PLL_ID_LVDS] = {
> +		{
> +			.n = "lvdspll_fracck",
> +			.p = "main_osc",
> +			.l = &pll_frac_layout,
> +			.f = CLK_SET_RATE_GATE,
> +			.c = &lvdspll_characteristics,
> +			.t = PLL_TYPE_FRAC,
> +		},
> +
> +		{
> +			.n = "lvdspll_divpmcck",
> +			.p = "lvdspll_fracck",
> +			.l = &pll_divpmc_layout,
> +			.f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
> +			     CLK_SET_RATE_PARENT,
> +			.c = &lvdspll_characteristics,
> +			.t = PLL_TYPE_DIV,
> +		},
> +	},
> +
> +	[PLL_ID_PLLA_DIV2] = {
> +		{
> +			.n = "plla_div2pmcck",
> +			.p = "plla_fracck",
> +			.l = &plladiv2_divpmc_layout,
> +			.f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE,
> +			.c = &plladiv2_characteristics,
> +			.t = PLL_TYPE_DIV,
> +		},
> +	},
> +};
> +
> +static const struct clk_programmable_layout sam9x7_programmable_layout = {
> +	.pres_mask = 0xff,
> +	.pres_shift = 8,
> +	.css_mask = 0x1f,
> +	.have_slck_mck = 0,
> +	.is_pres_direct = 1,
> +};
> +
> +static const struct clk_pcr_layout sam9x7_pcr_layout = {
> +	.offset = 0x88,
> +	.cmd = BIT(31),
> +	.gckcss_mask = GENMASK(12, 8),
> +	.pid_mask = GENMASK(6, 0),
> +};
> +
> +static const struct {
> +	char *n;
> +	char *p;
> +	u8 id;
> +	unsigned long flags;
> +} sam9x7_systemck[] = {
> +	/*
> +	 * ddrck feeds DDR controller and is enabled by bootloader thus we need
> +	 * to keep it enabled in case there is no Linux consumer for it.
> +	 */
> +	{ .n = "ddrck",		.p = "masterck_div",	.id = 2,	.flags = CLK_IS_CRITICAL },
> +	{ .n = "uhpck",		.p = "usbck",		.id = 6 },
> +	{ .n = "pck0",		.p = "prog0",		.id = 8 },
> +	{ .n = "pck1",		.p = "prog1",		.id = 9 },
> +};
> +
> +/*
> + * Peripheral clocks description
> + * @n:		clock name
> + * @f:		true if clock is critical and cannot be disabled
> + * @id:		peripheral id
> + */
> +static const struct {
> +	char *n;
> +	unsigned long f;
> +	u8 id;
> +} sam9x7_periphck[] = {
> +	{ .n = "pioA_clk",	.id = 2, },
> +	{ .n = "pioB_clk",	.id = 3, },
> +	{ .n = "pioC_clk",	.id = 4, },
> +	{ .n = "flex0_clk",	.id = 5, },
> +	{ .n = "flex1_clk",	.id = 6, },
> +	{ .n = "flex2_clk",	.id = 7, },
> +	{ .n = "flex3_clk",	.id = 8, },
> +	{ .n = "flex6_clk",	.id = 9, },
> +	{ .n = "flex7_clk",	.id = 10, },
> +	{ .n = "flex8_clk",	.id = 11, },
> +	{ .n = "sdmmc0_clk",	.id = 12, },
> +	{ .n = "flex4_clk",	.id = 13, },
> +	{ .n = "flex5_clk",	.id = 14, },
> +	{ .n = "flex9_clk",	.id = 15, },
> +	{ .n = "flex10_clk",	.id = 16, },
> +	{ .n = "tcb0_clk",	.id = 17, },
> +	{ .n = "pwm_clk",	.id = 18, },
> +	{ .n = "adc_clk",	.id = 19, },
> +	{ .n = "dma0_clk",	.id = 20, },
> +	{ .n = "uhphs_clk",	.id = 22, },
> +	{ .n = "udphs_clk",	.id = 23, },
> +	{ .n = "macb0_clk",	.id = 24, },
> +	{ .n = "lcd_clk",	.id = 25, },
> +	{ .n = "sdmmc1_clk",	.id = 26, },
> +	{ .n = "ssc_clk",	.id = 28, },
> +	{ .n = "can0_clk",	.id = 29, },
> +	{ .n = "can1_clk",	.id = 30, },
> +	{ .n = "flex11_clk",	.id = 32, },
> +	{ .n = "flex12_clk",	.id = 33, },
> +	{ .n = "i2s_clk",	.id = 34, },
> +	{ .n = "qspi_clk",	.id = 35, },
> +	{ .n = "gfx2d_clk",	.id = 36, },
> +	{ .n = "pit64b0_clk",	.id = 37, },
> +	{ .n = "trng_clk",	.id = 38, },
> +	{ .n = "aes_clk",	.id = 39, },
> +	{ .n = "tdes_clk",	.id = 40, },
> +	{ .n = "sha_clk",	.id = 41, },
> +	{ .n = "classd_clk",	.id = 42, },
> +	{ .n = "isi_clk",	.id = 43, },
> +	{ .n = "pioD_clk",	.id = 44, },
> +	{ .n = "tcb1_clk",	.id = 45, },
> +	{ .n = "dbgu_clk",	.id = 47, },
> +	/*
> +	 * mpddr_clk feeds DDR controller and is enabled by bootloader thus we
> +	 * need to keep it enabled in case there is no Linux consumer for it.
> +	 */
> +	{ .n = "mpddr_clk",	.id = 49,	.f = CLK_IS_CRITICAL },
> +	{ .n = "csi2dc_clk",	.id = 52, },
> +	{ .n = "csi4l_clk",	.id = 53, },
> +	{ .n = "dsi4l_clk",	.id = 54, },
> +	{ .n = "lvdsc_clk",	.id = 56, },
> +	{ .n = "pit64b1_clk",	.id = 58, },
> +	{ .n = "puf_clk",	.id = 59, },
> +	{ .n = "gmactsu_clk",	.id = 67, },
> +};
> +
> +/*
> + * Generic clock description
> + * @n:			clock name
> + * @pp:			PLL parents
> + * @pp_mux_table:	PLL parents mux table
> + * @r:			clock output range
> + * @pp_chg_id:		id in parent array of changeable PLL parent
> + * @pp_count:		PLL parents count
> + * @id:			clock id
> + */
> +static const struct {
> +	const char *n;
> +	const char *pp[8];
> +	const char pp_mux_table[8];
> +	struct clk_range r;
> +	int pp_chg_id;
> +	u8 pp_count;
> +	u8 id;
> +} sam9x7_gck[] = {
> +	{
> +		.n = "flex0_gclk",
> +		.id = 5,
> +		.pp = { "plla_div2pmcck", },
> +		.pp_mux_table = { 8, },
> +		.pp_count = 1,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "flex1_gclk",
> +		.id = 6,
> +		.pp = { "plla_div2pmcck", },
> +		.pp_mux_table = { 8, },
> +		.pp_count = 1,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "flex2_gclk",
> +		.id = 7,
> +		.pp = { "plla_div2pmcck", },
> +		.pp_mux_table = { 8, },
> +		.pp_count = 1,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "flex3_gclk",
> +		.id = 8,
> +		.pp = { "plla_div2pmcck", },
> +		.pp_mux_table = { 8, },
> +		.pp_count = 1,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "flex6_gclk",
> +		.id = 9,
> +		.pp = { "plla_div2pmcck", },
> +		.pp_mux_table = { 8, },
> +		.pp_count = 1,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "flex7_gclk",
> +		.id = 10,
> +		.pp = { "plla_div2pmcck", },
> +		.pp_mux_table = { 8, },
> +		.pp_count = 1,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "flex8_gclk",
> +		.id = 11,
> +		.pp = { "plla_div2pmcck", },
> +		.pp_mux_table = { 8, },
> +		.pp_count = 1,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "sdmmc0_gclk",
> +		.id = 12,
> +		.r = { .max = 105000000 },
> +		.pp = { "audiopll_divpmcck", "plla_div2pmcck", },
> +		.pp_mux_table = { 6, 8, },
> +		.pp_count = 2,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "flex4_gclk",
> +		.id = 13,
> +		.pp = { "plla_div2pmcck", },
> +		.pp_mux_table = { 8, },
> +		.pp_count = 1,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "flex5_gclk",
> +		.id = 14,
> +		.pp = { "plla_div2pmcck", },
> +		.pp_mux_table = { 8, },
> +		.pp_count = 1,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "flex9_gclk",
> +		.id = 15,
> +		.pp = { "plla_div2pmcck", },
> +		.pp_mux_table = { 8, },
> +		.pp_count = 1,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "flex10_gclk",
> +		.id = 16,
> +		.pp = { "plla_div2pmcck", },
> +		.pp_mux_table = { 8, },
> +		.pp_count = 1,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "tcb0_gclk",
> +		.id = 17,
> +		.pp = { "audiopll_divpmcck", "plla_div2pmcck", },
> +		.pp_mux_table = { 6, 8, },
> +		.pp_count = 2,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "adc_gclk",
> +		.id = 19,
> +		.pp = { "upll_divpmcck", "plla_div2pmcck", },
> +		.pp_mux_table = { 5, 8, },
> +		.pp_count = 2,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "lcd_gclk",
> +		.id = 25,
> +		.r = { .max = 75000000 },
> +		.pp = { "audiopll_divpmcck", "plla_div2pmcck", },
> +		.pp_mux_table = { 6, 8, },
> +		.pp_count = 2,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "sdmmc1_gclk",
> +		.id = 26,
> +		.r = { .max = 105000000 },
> +		.pp = { "audiopll_divpmcck", "plla_div2pmcck", },
> +		.pp_mux_table = { 6, 8, },
> +		.pp_count = 2,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "mcan0_gclk",
> +		.id = 29,
> +		.r = { .max = 80000000 },
> +		.pp = { "upll_divpmcck", "plla_div2pmcck", },
> +		.pp_mux_table = { 5, 8, },
> +		.pp_count = 2,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "mcan1_gclk",
> +		.id = 30,
> +		.r = { .max = 80000000 },
> +		.pp = { "upll_divpmcck", "plla_div2pmcck", },
> +		.pp_mux_table = { 5, 8, },
> +		.pp_count = 2,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "flex11_gclk",
> +		.id = 32,
> +		.pp = { "plla_div2pmcck", },
> +		.pp_mux_table = { 8, },
> +		.pp_count = 1,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "flex12_gclk",
> +		.id = 33,
> +		.pp = { "plla_div2pmcck", },
> +		.pp_mux_table = { 8, },
> +		.pp_count = 1,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "i2s_gclk",
> +		.id = 34,
> +		.r = { .max = 100000000 },
> +		.pp = { "audiopll_divpmcck", "plla_div2pmcck", },
> +		.pp_mux_table = { 6, 8, },
> +		.pp_count = 2,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "qspi_gclk",
> +		.id = 35,
> +		.r = { .max = 20000000 },
> +		.pp = { "audiopll_divpmcck", "plla_div2pmcck", },
> +		.pp_mux_table = { 6, 8, },
> +		.pp_count = 2,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "pit64b0_gclk",
> +		.id = 37,
> +		.pp = { "plla_div2pmcck", },
> +		.pp_mux_table = { 8, },
> +		.pp_count = 1,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "classd_gclk",
> +		.id = 42,
> +		.r = { .max = 100000000 },
> +		.pp = { "audiopll_divpmcck", "plla_div2pmcck", },
> +		.pp_mux_table = { 6, 8, },
> +		.pp_count = 2,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "tcb1_gclk",
> +		.id = 45,
> +		.pp = { "audiopll_divpmcck", "plla_div2pmcck", },
> +		.pp_mux_table = { 6, 8, },
> +		.pp_count = 2,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "dbgu_gclk",
> +		.id = 47,
> +		.pp = { "plla_div2pmcck", },
> +		.pp_mux_table = { 8, },
> +		.pp_count = 1,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "mipiphy_gclk",
> +		.id = 55,
> +		.r = { .max = 27000000 },
> +		.pp = { "plla_div2pmcck", },
> +		.pp_mux_table = { 8, },
> +		.pp_count = 1,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "pit64b1_gclk",
> +		.id = 58,
> +		.pp = { "plla_div2pmcck", },
> +		.pp_mux_table = { 8, },
> +		.pp_count = 1,
> +		.pp_chg_id = INT_MIN,
> +	},
> +
> +	{
> +		.n = "gmac_gclk",
> +		.id = 67,
> +		.pp = { "audiopll_divpmcck", "plla_div2pmcck", },
> +		.pp_mux_table = { 6, 8, },
> +		.pp_count = 2,
> +		.pp_chg_id = INT_MIN,
> +	},
> +};
> +
> +static void __init sam9x7_pmc_setup(struct device_node *np)
> +{
> +	struct clk_range range = CLK_RANGE(0, 0);
> +	const char *td_slck_name, *md_slck_name, *mainxtal_name;
> +	struct pmc_data *sam9x7_pmc;
> +	const char *parent_names[9];
> +	void **alloc_mem = NULL;
> +	int alloc_mem_size = 0;
> +	struct clk_hw *main_osc_hw;
> +	struct regmap *regmap;
> +	struct clk_hw *hw;
> +	int i, j;
> +
> +	i = of_property_match_string(np, "clock-names", "td_slck");
> +	if (i < 0)
> +		return;
> +
> +	td_slck_name = of_clk_get_parent_name(np, i);
> +
> +	i = of_property_match_string(np, "clock-names", "md_slck");
> +	if (i < 0)
> +		return;
> +
> +	md_slck_name = of_clk_get_parent_name(np, i);
> +
> +	i = of_property_match_string(np, "clock-names", "main_xtal");
> +	if (i < 0)
> +		return;
> +	mainxtal_name = of_clk_get_parent_name(np, i);
> +
> +	regmap = device_node_to_regmap(np);
> +	if (IS_ERR(regmap))
> +		return;
> +
> +	sam9x7_pmc = pmc_data_allocate(PMC_PLLACK + 1,
> +				       nck(sam9x7_systemck),
> +				       nck(sam9x7_periphck),
> +				       nck(sam9x7_gck), 8);
> +	if (!sam9x7_pmc)
> +		return;
> +
> +	alloc_mem = kmalloc(sizeof(void *) *
> +				(ARRAY_SIZE(sam9x7_gck)),
> +				GFP_KERNEL);
> +	if (!alloc_mem)
> +		goto err_free;
> +
> +	hw = at91_clk_register_main_rc_osc(regmap, "main_rc_osc", 12000000,
> +					   50000000);
> +	if (IS_ERR(hw))
> +		goto err_free;
> +
> +	hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name, 0);
> +	if (IS_ERR(hw))
> +		goto err_free;
> +	main_osc_hw = hw;
> +
> +	parent_names[0] = "main_rc_osc";
> +	parent_names[1] = "main_osc";
> +	hw = at91_clk_register_sam9x5_main(regmap, "mainck", parent_names, 2);
> +	if (IS_ERR(hw))
> +		goto err_free;
> +
> +	sam9x7_pmc->chws[PMC_MAIN] = hw;
> +
> +	for (i = 0; i < PLL_ID_MAX; i++) {
> +		for (j = 0; j < 3; j++) {
> +			struct clk_hw *parent_hw;
> +
> +			if (!sam9x7_plls[i][j].n)
> +				continue;
> +
> +			switch (sam9x7_plls[i][j].t) {
> +			case PLL_TYPE_FRAC:
> +				if (!strcmp(sam9x7_plls[i][j].p, "mainck"))
> +					parent_hw = sam9x7_pmc->chws[PMC_MAIN];
> +				else if (!strcmp(sam9x7_plls[i][j].p, "main_osc"))
> +					parent_hw = main_osc_hw;
> +				else
> +					parent_hw = __clk_get_hw(of_clk_get_by_name
> +								 (np, sam9x7_plls[i][j].p));
> +
> +				hw = sam9x60_clk_register_frac_pll(regmap,
> +								   &pmc_pll_lock,
> +								   sam9x7_plls[i][j].n,
> +								   sam9x7_plls[i][j].p,
> +								   parent_hw, i,
> +								   sam9x7_plls[i][j].c,
> +								   sam9x7_plls[i][j].l,
> +								   sam9x7_plls[i][j].f);
> +				break;
> +
> +			case PLL_TYPE_DIV:
> +				hw = sam9x60_clk_register_div_pll(regmap,
> +								  &pmc_pll_lock,
> +								  sam9x7_plls[i][j].n,
> +								  sam9x7_plls[i][j].p, i,
> +								  sam9x7_plls[i][j].c,
> +								  sam9x7_plls[i][j].l,
> +								  sam9x7_plls[i][j].f, 0);
> +				break;
> +
> +			default:
> +				continue;
> +			}
> +
> +			if (IS_ERR(hw))
> +				goto err_free;
> +
> +			if (sam9x7_plls[i][j].eid)
> +				sam9x7_pmc->chws[sam9x7_plls[i][j].eid] = hw;
> +		}
> +	}
> +
> +	parent_names[0] = md_slck_name;
> +	parent_names[1] = "mainck";
> +	parent_names[2] = "plla_divpmcck";
> +	parent_names[3] = "upll_divpmcck";
> +	hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4,
> +					   parent_names, &sam9x7_master_layout,
> +					   &mck_characteristics, &mck_lock);
> +	if (IS_ERR(hw))
> +		goto err_free;
> +
> +	hw = at91_clk_register_master_div(regmap, "masterck_div",
> +					  "masterck_pres", &sam9x7_master_layout,
> +					  &mck_characteristics, &mck_lock,
> +					  CLK_SET_RATE_GATE, 0);
> +	if (IS_ERR(hw))
> +		goto err_free;
> +
> +	sam9x7_pmc->chws[PMC_MCK] = hw;
> +
> +	parent_names[0] = "plla_divpmcck";
> +	parent_names[1] = "upll_divpmcck";
> +	parent_names[2] = "main_osc";
> +	hw = sam9x60_clk_register_usb(regmap, "usbck", parent_names, 3);
> +	if (IS_ERR(hw))
> +		goto err_free;
> +
> +	parent_names[0] = md_slck_name;
> +	parent_names[1] = td_slck_name;
> +	parent_names[2] = "mainck";
> +	parent_names[3] = "masterck_div";
> +	parent_names[4] = "plla_divpmcck";
> +	parent_names[5] = "upll_divpmcck";
> +	parent_names[6] = "audiopll_divpmcck";
> +	for (i = 0; i < 2; i++) {
> +		char name[6];
> +
> +		snprintf(name, sizeof(name), "prog%d", i);
> +
> +		hw = at91_clk_register_programmable(regmap, name,
> +						    parent_names, 7, i,
> +						    &sam9x7_programmable_layout,
> +						    NULL);
> +		if (IS_ERR(hw))
> +			goto err_free;
> +
> +		sam9x7_pmc->pchws[i] = hw;
> +	}
> +
> +	for (i = 0; i < ARRAY_SIZE(sam9x7_systemck); i++) {
> +		hw = at91_clk_register_system(regmap, sam9x7_systemck[i].n,
> +					      sam9x7_systemck[i].p,
> +					      sam9x7_systemck[i].id,
> +					      sam9x7_systemck[i].flags);
> +		if (IS_ERR(hw))
> +			goto err_free;
> +
> +		sam9x7_pmc->shws[sam9x7_systemck[i].id] = hw;
> +	}
> +
> +	for (i = 0; i < ARRAY_SIZE(sam9x7_periphck); i++) {
> +		hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
> +							 &sam9x7_pcr_layout,
> +							 sam9x7_periphck[i].n,
> +							 "masterck_div",
> +							 sam9x7_periphck[i].id,
> +							 &range, INT_MIN,
> +							 sam9x7_periphck[i].f);
> +		if (IS_ERR(hw))
> +			goto err_free;
> +
> +		sam9x7_pmc->phws[sam9x7_periphck[i].id] = hw;
> +	}
> +
> +	parent_names[0] = md_slck_name;
> +	parent_names[1] = td_slck_name;
> +	parent_names[2] = "mainck";
> +	parent_names[3] = "masterck_div";
> +	for (i = 0; i < ARRAY_SIZE(sam9x7_gck); i++) {
> +		u8 num_parents = 4 + sam9x7_gck[i].pp_count;
> +		u32 *mux_table;
> +
> +		mux_table = kmalloc_array(num_parents, sizeof(*mux_table),
> +					  GFP_KERNEL);
> +		if (!mux_table)
> +			goto err_free;
> +
> +		SAM9X7_INIT_TABLE(mux_table, 4);
> +		SAM9X7_FILL_TABLE(&mux_table[4], sam9x7_gck[i].pp_mux_table,
> +				  sam9x7_gck[i].pp_count);
> +		SAM9X7_FILL_TABLE(&parent_names[4], sam9x7_gck[i].pp,
> +				  sam9x7_gck[i].pp_count);
> +
> +		hw = at91_clk_register_generated(regmap, &pmc_pcr_lock,
> +						 &sam9x7_pcr_layout,
> +						 sam9x7_gck[i].n,
> +						 parent_names, mux_table,
> +						 num_parents,
> +						 sam9x7_gck[i].id,
> +						 &sam9x7_gck[i].r,
> +						 sam9x7_gck[i].pp_chg_id);
> +		if (IS_ERR(hw))
> +			goto err_free;
> +
> +		sam9x7_pmc->ghws[sam9x7_gck[i].id] = hw;
> +		alloc_mem[alloc_mem_size++] = mux_table;
> +	}
> +
> +	of_clk_add_hw_provider(np, of_clk_hw_pmc_get, sam9x7_pmc);
> +
> +	return;
> +
> +err_free:
> +	if (alloc_mem) {
> +		for (i = 0; i < alloc_mem_size; i++)
> +			kfree(alloc_mem[i]);
> +		kfree(alloc_mem);
> +	}
> +	kfree(sam9x7_pmc);
> +}
> +
> +/* Some clks are used for a clocksource */
> +CLK_OF_DECLARE(sam9x7_pmc, "microchip,sam9x7-pmc", sam9x7_pmc_setup);


  parent reply	other threads:[~2023-06-15  8:41 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-03 20:02 [PATCH 00/21] Add support for sam9x7 SoC family Varshini Rajendran
2023-06-03 20:02 ` [PATCH 01/21] dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x60 compatible Varshini Rajendran
2023-06-05  6:35   ` Krzysztof Kozlowski
2023-06-05  7:04     ` Arnd Bergmann
2023-06-05  7:34       ` Krzysztof Kozlowski
2023-06-14 19:37   ` Rob Herring
2023-06-03 20:02 ` [PATCH 02/21] dt-bindings: usb: ehci: Add atmel at91sam9g45-ehci compatible Varshini Rajendran
2023-06-14 19:38   ` Rob Herring
2023-06-03 20:02 ` [PATCH 03/21] dt-bindings: usb: generic-ehci: Document clock-names property Varshini Rajendran
2023-06-03 21:15   ` Conor Dooley
2023-06-05 12:54     ` Nicolas Ferre
2023-06-05  6:36   ` Krzysztof Kozlowski
2023-06-03 20:02 ` [PATCH 04/21] ARM: dts: at91: sam9x7: add device tree for soc Varshini Rajendran
2023-06-03 21:35   ` Conor Dooley
2023-06-05  6:39   ` Krzysztof Kozlowski
2023-06-05  6:41   ` Krzysztof Kozlowski
2023-06-09  5:35   ` Dharma.B
2023-06-15  7:36   ` Claudiu.Beznea
2023-06-03 20:02 ` [PATCH 05/21] ARM: configs: at91: enable config flags for sam9x7 SoC Varshini Rajendran
2023-06-03 20:02 ` [PATCH 06/21] ARM: configs: at91: add mcan support Varshini Rajendran
2023-06-05  6:40   ` Krzysztof Kozlowski
2023-06-03 20:02 ` [PATCH 07/21] ARM: configs: at91: Enable csi and isc support Varshini Rajendran
2023-06-03 20:02 ` [PATCH 08/21] ARM: at91: pm: add support for sam9x7 soc family Varshini Rajendran
2023-06-15  7:42   ` Claudiu.Beznea
2023-06-03 20:02 ` [PATCH 09/21] ARM: at91: pm: add sam9x7 soc init config Varshini Rajendran
2023-06-15  7:43   ` Claudiu.Beznea
2023-06-03 20:02 ` [PATCH 10/21] ARM: at91: Kconfig: add config flag for SAM9X7 SoC Varshini Rajendran
2023-06-15  7:46   ` Claudiu.Beznea
2023-06-03 20:02 ` [PATCH 11/21] ARM: at91: add support in soc driver for new sam9x7 Varshini Rajendran
2023-06-15  7:48   ` Claudiu.Beznea
2023-06-03 20:02 ` [PATCH 12/21] clk: at91: clk-sam9x60-pll: re-factor to support individual core freq outputs Varshini Rajendran
2023-06-15  7:54   ` Claudiu.Beznea
2023-06-03 20:02 ` [PATCH 13/21] clk: at91: sam9x7: add support for HW PLL freq dividers Varshini Rajendran
2023-06-15  8:00   ` Claudiu.Beznea
2023-06-03 20:02 ` [PATCH 14/21] clk: at91: sam9x7: add sam9x7 pmc driver Varshini Rajendran
2023-06-04 18:00   ` Simon Horman
2023-06-15  8:39   ` Claudiu.Beznea [this message]
2023-06-03 20:02 ` [PATCH 15/21] dt-bindings: irqchip/atmel-aic5: Add support for sam9x7 aic Varshini Rajendran
2023-06-03 21:19   ` Conor Dooley
2023-06-03 21:23     ` Conor Dooley
2023-06-04  9:49       ` Arnd Bergmann
2023-06-04 21:08         ` Conor Dooley
2023-06-05 12:37           ` Nicolas Ferre
2023-06-14 19:41             ` Rob Herring
2023-06-03 20:02 ` [PATCH 16/21] " Varshini Rajendran
2023-06-03 20:02 ` [PATCH 17/21] power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7 Varshini Rajendran
2023-06-05  6:43   ` Krzysztof Kozlowski
2023-06-05 13:04     ` Nicolas Ferre
2023-06-05 13:26       ` Conor Dooley
2023-06-16 17:32         ` Varshini.Rajendran
2023-06-05 13:33       ` Krzysztof Kozlowski
2023-06-03 20:02 ` [PATCH 18/21] power: reset: at91-reset: add reset support for sam9x7 soc Varshini Rajendran
2023-06-03 20:02 ` [PATCH 19/21] power: reset: at91-reset: add sdhwc " Varshini Rajendran
2023-06-03 20:02 ` [PATCH 20/21] dt-bindings: net: cdns,macb: add documentation for sam9x7 ethernet interface Varshini Rajendran
2023-06-05  6:42   ` Krzysztof Kozlowski
2023-06-14 19:42   ` Rob Herring
2023-06-03 20:02 ` [PATCH 21/21] net: macb: add support for gmac to sam9x7 Varshini Rajendran
2023-06-05  6:42   ` Krzysztof Kozlowski
2023-06-05 12:07     ` Nicolas Ferre
2023-06-05 12:21       ` Arnd Bergmann
2023-06-05 13:34       ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=74e78c5a-8e77-7d70-2a1b-f2a8343fdcf7@microchip.com \
    --to=claudiu.beznea@microchip.com \
    --cc=Balakrishnan.S@microchip.com \
    --cc=Balamanikandan.Gunasundar@microchip.com \
    --cc=Cristian.Birsan@microchip.com \
    --cc=Dharma.B@microchip.com \
    --cc=Durai.ManickamKR@microchip.com \
    --cc=Hari.PrasathGE@microchip.com \
    --cc=Manikandan.M@microchip.com \
    --cc=Mihai.Sain@microchip.com \
    --cc=Nayabbasha.Sayed@microchip.com \
    --cc=Nicolas.Ferre@microchip.com \
    --cc=Varshini.Rajendran@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=arnd@arndb.de \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=gregory.clement@bootlin.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=maz@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sre@kernel.org \
    --cc=sudeep.holla@arm.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).