From: Yash Shah <yash.shah@sifive.com>
To: linux-spi@vger.kernel.org, linux-serial@vger.kernel.org,
linux-pwm@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org,
devicetree@vger.kernel.org, linux-gpio@vger.kernel.org
Cc: broonie@kernel.org, gregkh@linuxfoundation.org,
aou@eecs.berkeley.edu, lee.jones@linaro.org,
u.kleine-koenig@pengutronix.de, thierry.reding@gmail.com,
andrew@lunn.ch, peter@korsgaard.com, paul.walmsley@sifive.com,
palmer@dabbelt.com, robh+dt@kernel.org,
bgolaszewski@baylibre.com, linus.walleij@linaro.org,
Yash Shah <yash.shah@sifive.com>
Subject: [PATCH v2 7/9] riscv: dts: add initial support for the SiFive FU740-C000 SoC
Date: Tue, 8 Dec 2020 10:25:39 +0530 [thread overview]
Message-ID: <1607403341-57214-8-git-send-email-yash.shah@sifive.com> (raw)
In-Reply-To: <1607403341-57214-1-git-send-email-yash.shah@sifive.com>
Add initial support for the SiFive FU540-C000 SoC. FU740-C000 is built
around the SiFIve U7 Core Complex and a TileLink interconnect.
This file is expected to grow as more device drivers are added to the
kernel.
Signed-off-by: Yash Shah <yash.shah@sifive.com>
---
arch/riscv/boot/dts/sifive/fu740-c000.dtsi | 293 +++++++++++++++++++++++++++++
1 file changed, 293 insertions(+)
create mode 100644 arch/riscv/boot/dts/sifive/fu740-c000.dtsi
diff --git a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
new file mode 100644
index 0000000..eeb4f8c3
--- /dev/null
+++ b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020 SiFive, Inc */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/sifive-fu740-prci.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "sifive,fu740-c000", "sifive,fu740";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ ethernet0 = ð0;
+ };
+
+ chosen {
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu0: cpu@0 {
+ compatible = "sifive,bullet0", "riscv";
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <16384>;
+ next-level-cache = <&ccache>;
+ reg = <0x0>;
+ riscv,isa = "rv64imac";
+ status = "disabled";
+ cpu0_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ cpu1: cpu@1 {
+ compatible = "sifive,bullet0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ reg = <0x1>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ cpu1_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ cpu2: cpu@2 {
+ compatible = "sifive,bullet0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ reg = <0x2>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ cpu2_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ cpu3: cpu@3 {
+ compatible = "sifive,bullet0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ reg = <0x3>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ cpu3_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ cpu4: cpu@4 {
+ compatible = "sifive,bullet0", "riscv";
+ d-cache-block-size = <64>;
+ d-cache-sets = <64>;
+ d-cache-size = <32768>;
+ d-tlb-sets = <1>;
+ d-tlb-size = <40>;
+ device_type = "cpu";
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <32768>;
+ i-tlb-sets = <1>;
+ i-tlb-size = <40>;
+ mmu-type = "riscv,sv39";
+ next-level-cache = <&ccache>;
+ reg = <0x4>;
+ riscv,isa = "rv64imafdc";
+ tlb-split;
+ cpu4_intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ };
+ };
+ };
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+ plic0: interrupt-controller@c000000 {
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
+ reg = <0x0 0xc000000 0x0 0x4000000>;
+ riscv,ndev = <69>;
+ interrupt-controller;
+ interrupts-extended = <
+ &cpu0_intc 0xffffffff
+ &cpu1_intc 0xffffffff &cpu1_intc 9
+ &cpu2_intc 0xffffffff &cpu2_intc 9
+ &cpu3_intc 0xffffffff &cpu3_intc 9
+ &cpu4_intc 0xffffffff &cpu4_intc 9>;
+ };
+ prci: clock-controller@10000000 {
+ compatible = "sifive,fu740-c000-prci";
+ reg = <0x0 0x10000000 0x0 0x1000>;
+ clocks = <&hfclk>, <&rtcclk>;
+ #clock-cells = <1>;
+ };
+ uart0: serial@10010000 {
+ compatible = "sifive,fu740-c000-uart", "sifive,uart0";
+ reg = <0x0 0x10010000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <39>;
+ clocks = <&prci PRCI_CLK_PCLK>;
+ status = "disabled";
+ };
+ uart1: serial@10011000 {
+ compatible = "sifive,fu740-c000-uart", "sifive,uart0";
+ reg = <0x0 0x10011000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <40>;
+ clocks = <&prci PRCI_CLK_PCLK>;
+ status = "disabled";
+ };
+ i2c0: i2c@10030000 {
+ compatible = "sifive,fu740-c000-i2c", "sifive,i2c0";
+ reg = <0x0 0x10030000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <52>;
+ clocks = <&prci PRCI_CLK_PCLK>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ i2c1: i2c@10031000 {
+ compatible = "sifive,fu740-c000-i2c", "sifive,i2c0";
+ reg = <0x0 0x10031000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <53>;
+ clocks = <&prci PRCI_CLK_PCLK>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ qspi0: spi@10040000 {
+ compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+ reg = <0x0 0x10040000 0x0 0x1000>,
+ <0x0 0x20000000 0x0 0x10000000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <41>;
+ clocks = <&prci PRCI_CLK_PCLK>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ qspi1: spi@10041000 {
+ compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+ reg = <0x0 0x10041000 0x0 0x1000>,
+ <0x0 0x30000000 0x0 0x10000000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <42>;
+ clocks = <&prci PRCI_CLK_PCLK>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ spi0: spi@10050000 {
+ compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+ reg = <0x0 0x10050000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <43>;
+ clocks = <&prci PRCI_CLK_PCLK>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ eth0: ethernet@10090000 {
+ compatible = "sifive,fu540-c000-gem";
+ interrupt-parent = <&plic0>;
+ interrupts = <55>;
+ reg = <0x0 0x10090000 0x0 0x2000>,
+ <0x0 0x100a0000 0x0 0x1000>;
+ local-mac-address = [00 00 00 00 00 00];
+ clock-names = "pclk", "hclk";
+ clocks = <&prci PRCI_CLK_GEMGXLPLL>,
+ <&prci PRCI_CLK_GEMGXLPLL>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ pwm0: pwm@10020000 {
+ compatible = "sifive,fu740-c000-pwm", "sifive,pwm0";
+ reg = <0x0 0x10020000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <44>, <45>, <46>, <47>;
+ clocks = <&prci PRCI_CLK_PCLK>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+ pwm1: pwm@10021000 {
+ compatible = "sifive,fu740-c000-pwm", "sifive,pwm0";
+ reg = <0x0 0x10021000 0x0 0x1000>;
+ interrupt-parent = <&plic0>;
+ interrupts = <48>, <49>, <50>, <51>;
+ clocks = <&prci PRCI_CLK_PCLK>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+ ccache: cache-controller@2010000 {
+ compatible = "sifive,fu740-c000-ccache", "cache";
+ cache-block-size = <64>;
+ cache-level = <2>;
+ cache-sets = <2048>;
+ cache-size = <2097152>;
+ cache-unified;
+ interrupt-parent = <&plic0>;
+ interrupts = <19 20 21 22>;
+ reg = <0x0 0x2010000 0x0 0x1000>;
+ };
+ gpio: gpio@10060000 {
+ compatible = "sifive,fu740-c000-gpio", "sifive,gpio0";
+ interrupt-parent = <&plic0>;
+ interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>,
+ <30>, <31>, <32>, <33>, <34>, <35>, <36>,
+ <37>, <38>;
+ reg = <0x0 0x10060000 0x0 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&prci PRCI_CLK_PCLK>;
+ status = "disabled";
+ };
+ };
+};
--
2.7.4
next prev parent reply other threads:[~2020-12-08 4:58 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-08 4:55 [PATCH v2 0/9] arch: riscv: add board and SoC DT file support Yash Shah
2020-12-08 4:55 ` [PATCH v2 1/9] dt-bindings: riscv: Update DT binding docs to support SiFive FU740 SoC Yash Shah
2020-12-10 3:55 ` Rob Herring
2020-12-10 13:34 ` Bin Meng
2020-12-08 4:55 ` [PATCH v2 2/9] dt-bindings: spi: " Yash Shah
2020-12-08 4:55 ` [PATCH v2 3/9] dt-bindings: pwm: " Yash Shah
2020-12-10 3:56 ` Rob Herring
2020-12-08 4:55 ` [PATCH v2 4/9] dt-bindings: serial: " Yash Shah
2020-12-10 3:56 ` Rob Herring
2020-12-08 4:55 ` [PATCH v2 5/9] dt-bindings: gpio: " Yash Shah
2020-12-10 3:57 ` Rob Herring
2020-12-08 4:55 ` [PATCH v2 6/9] dt-bindings: i2c: " Yash Shah
2020-12-10 3:59 ` Rob Herring
2020-12-22 3:23 ` Palmer Dabbelt
2020-12-08 4:55 ` Yash Shah [this message]
2020-12-10 13:34 ` [PATCH v2 7/9] riscv: dts: add initial support for the SiFive FU740-C000 SoC Bin Meng
2020-12-16 5:24 ` Yash Shah
2020-12-16 6:06 ` Bin Meng
2020-12-16 6:12 ` Yash Shah
2020-12-08 4:55 ` [PATCH v2 8/9] dt-bindings: riscv: Update YAML doc to support SiFive HiFive Unmatched board Yash Shah
2020-12-10 3:59 ` Rob Herring
2020-12-10 13:34 ` Bin Meng
2020-12-08 4:55 ` [PATCH v2 9/9] riscv: dts: add initial board data for the SiFive HiFive Unmatched Yash Shah
2020-12-10 13:34 ` Bin Meng
2020-12-08 17:11 ` (subset) [PATCH v2 0/9] arch: riscv: add board and SoC DT file support Mark Brown
2020-12-22 4:38 ` Palmer Dabbelt
2021-01-08 3:12 ` Palmer Dabbelt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1607403341-57214-8-git-send-email-yash.shah@sifive.com \
--to=yash.shah@sifive.com \
--cc=andrew@lunn.ch \
--cc=aou@eecs.berkeley.edu \
--cc=bgolaszewski@baylibre.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=peter@korsgaard.com \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).