From: Bin Meng <bmeng.cn@gmail.com>
To: Yash Shah <yash.shah@sifive.com>
Cc: linux-spi@vger.kernel.org, linux-serial@vger.kernel.org,
linux-pwm@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-kernel <linux-kernel@vger.kernel.org>,
linux-riscv <linux-riscv@lists.infradead.org>,
devicetree <devicetree@vger.kernel.org>,
"open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
broonie@kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Albert Ou <aou@eecs.berkeley.edu>,
lee.jones@linaro.org, u.kleine-koenig@pengutronix.de,
Thierry Reding <thierry.reding@gmail.com>,
andrew@lunn.ch, Peter Korsgaard <peter@korsgaard.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Rob Herring <robh+dt@kernel.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Linus Walleij <linus.walleij@linaro.org>
Subject: Re: [PATCH v2 7/9] riscv: dts: add initial support for the SiFive FU740-C000 SoC
Date: Thu, 10 Dec 2020 21:34:47 +0800 [thread overview]
Message-ID: <CAEUhbmURfwMYo6FTuL7TP7daSuhBOOpcZX-mfCxCTVS+QiaHqA@mail.gmail.com> (raw)
In-Reply-To: <1607403341-57214-8-git-send-email-yash.shah@sifive.com>
On Tue, Dec 8, 2020 at 3:06 PM Yash Shah <yash.shah@sifive.com> wrote:
>
> Add initial support for the SiFive FU540-C000 SoC. FU740-C000 is built
FU740-C000 Soc
> around the SiFIve U7 Core Complex and a TileLink interconnect.
>
> This file is expected to grow as more device drivers are added to the
> kernel.
>
> Signed-off-by: Yash Shah <yash.shah@sifive.com>
> ---
> arch/riscv/boot/dts/sifive/fu740-c000.dtsi | 293 +++++++++++++++++++++++++++++
> 1 file changed, 293 insertions(+)
> create mode 100644 arch/riscv/boot/dts/sifive/fu740-c000.dtsi
>
> diff --git a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
> new file mode 100644
> index 0000000..eeb4f8c3
> --- /dev/null
> +++ b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
> @@ -0,0 +1,293 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/* Copyright (c) 2020 SiFive, Inc */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/clock/sifive-fu740-prci.h>
> +
> +/ {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "sifive,fu740-c000", "sifive,fu740";
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + ethernet0 = ð0;
> + };
> +
> + chosen {
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + cpu0: cpu@0 {
> + compatible = "sifive,bullet0", "riscv";
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <128>;
> + i-cache-size = <16384>;
> + next-level-cache = <&ccache>;
> + reg = <0x0>;
> + riscv,isa = "rv64imac";
> + status = "disabled";
> + cpu0_intc: interrupt-controller {
> + #interrupt-cells = <1>;
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + };
> + };
> + cpu1: cpu@1 {
> + compatible = "sifive,bullet0", "riscv";
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <128>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + reg = <0x1>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> + cpu1_intc: interrupt-controller {
> + #interrupt-cells = <1>;
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + };
> + };
> + cpu2: cpu@2 {
> + compatible = "sifive,bullet0", "riscv";
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <128>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + reg = <0x2>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> + cpu2_intc: interrupt-controller {
> + #interrupt-cells = <1>;
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + };
> + };
> + cpu3: cpu@3 {
> + compatible = "sifive,bullet0", "riscv";
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <128>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + reg = <0x3>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> + cpu3_intc: interrupt-controller {
> + #interrupt-cells = <1>;
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + };
> + };
> + cpu4: cpu@4 {
> + compatible = "sifive,bullet0", "riscv";
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <128>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + reg = <0x4>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> + cpu4_intc: interrupt-controller {
> + #interrupt-cells = <1>;
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + };
> + };
> + };
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "simple-bus";
> + ranges;
> + plic0: interrupt-controller@c000000 {
> + #interrupt-cells = <1>;
> + #address-cells = <0>;
> + compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
I don't see bindings updated for FU740 PLIC, like "sifive,fu740-c000-plic"?
> + reg = <0x0 0xc000000 0x0 0x4000000>;
> + riscv,ndev = <69>;
> + interrupt-controller;
> + interrupts-extended = <
> + &cpu0_intc 0xffffffff
> + &cpu1_intc 0xffffffff &cpu1_intc 9
> + &cpu2_intc 0xffffffff &cpu2_intc 9
> + &cpu3_intc 0xffffffff &cpu3_intc 9
> + &cpu4_intc 0xffffffff &cpu4_intc 9>;
> + };
> + prci: clock-controller@10000000 {
> + compatible = "sifive,fu740-c000-prci";
> + reg = <0x0 0x10000000 0x0 0x1000>;
> + clocks = <&hfclk>, <&rtcclk>;
> + #clock-cells = <1>;
> + };
> + uart0: serial@10010000 {
> + compatible = "sifive,fu740-c000-uart", "sifive,uart0";
> + reg = <0x0 0x10010000 0x0 0x1000>;
> + interrupt-parent = <&plic0>;
> + interrupts = <39>;
> + clocks = <&prci PRCI_CLK_PCLK>;
> + status = "disabled";
> + };
> + uart1: serial@10011000 {
> + compatible = "sifive,fu740-c000-uart", "sifive,uart0";
> + reg = <0x0 0x10011000 0x0 0x1000>;
> + interrupt-parent = <&plic0>;
> + interrupts = <40>;
> + clocks = <&prci PRCI_CLK_PCLK>;
> + status = "disabled";
> + };
> + i2c0: i2c@10030000 {
> + compatible = "sifive,fu740-c000-i2c", "sifive,i2c0";
> + reg = <0x0 0x10030000 0x0 0x1000>;
> + interrupt-parent = <&plic0>;
> + interrupts = <52>;
> + clocks = <&prci PRCI_CLK_PCLK>;
> + reg-shift = <2>;
> + reg-io-width = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> + i2c1: i2c@10031000 {
> + compatible = "sifive,fu740-c000-i2c", "sifive,i2c0";
> + reg = <0x0 0x10031000 0x0 0x1000>;
> + interrupt-parent = <&plic0>;
> + interrupts = <53>;
> + clocks = <&prci PRCI_CLK_PCLK>;
> + reg-shift = <2>;
> + reg-io-width = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> + qspi0: spi@10040000 {
> + compatible = "sifive,fu740-c000-spi", "sifive,spi0";
> + reg = <0x0 0x10040000 0x0 0x1000>,
> + <0x0 0x20000000 0x0 0x10000000>;
> + interrupt-parent = <&plic0>;
> + interrupts = <41>;
> + clocks = <&prci PRCI_CLK_PCLK>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> + qspi1: spi@10041000 {
> + compatible = "sifive,fu740-c000-spi", "sifive,spi0";
> + reg = <0x0 0x10041000 0x0 0x1000>,
> + <0x0 0x30000000 0x0 0x10000000>;
> + interrupt-parent = <&plic0>;
> + interrupts = <42>;
> + clocks = <&prci PRCI_CLK_PCLK>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> + spi0: spi@10050000 {
> + compatible = "sifive,fu740-c000-spi", "sifive,spi0";
> + reg = <0x0 0x10050000 0x0 0x1000>;
> + interrupt-parent = <&plic0>;
> + interrupts = <43>;
> + clocks = <&prci PRCI_CLK_PCLK>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> + eth0: ethernet@10090000 {
> + compatible = "sifive,fu540-c000-gem";
"sifive,fu740-c000-gem"?
> + interrupt-parent = <&plic0>;
> + interrupts = <55>;
> + reg = <0x0 0x10090000 0x0 0x2000>,
> + <0x0 0x100a0000 0x0 0x1000>;
> + local-mac-address = [00 00 00 00 00 00];
> + clock-names = "pclk", "hclk";
> + clocks = <&prci PRCI_CLK_GEMGXLPLL>,
> + <&prci PRCI_CLK_GEMGXLPLL>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> + pwm0: pwm@10020000 {
> + compatible = "sifive,fu740-c000-pwm", "sifive,pwm0";
> + reg = <0x0 0x10020000 0x0 0x1000>;
> + interrupt-parent = <&plic0>;
> + interrupts = <44>, <45>, <46>, <47>;
> + clocks = <&prci PRCI_CLK_PCLK>;
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> + pwm1: pwm@10021000 {
> + compatible = "sifive,fu740-c000-pwm", "sifive,pwm0";
> + reg = <0x0 0x10021000 0x0 0x1000>;
> + interrupt-parent = <&plic0>;
> + interrupts = <48>, <49>, <50>, <51>;
> + clocks = <&prci PRCI_CLK_PCLK>;
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> + ccache: cache-controller@2010000 {
> + compatible = "sifive,fu740-c000-ccache", "cache";
> + cache-block-size = <64>;
> + cache-level = <2>;
> + cache-sets = <2048>;
> + cache-size = <2097152>;
> + cache-unified;
> + interrupt-parent = <&plic0>;
> + interrupts = <19 20 21 22>;
> + reg = <0x0 0x2010000 0x0 0x1000>;
> + };
> + gpio: gpio@10060000 {
> + compatible = "sifive,fu740-c000-gpio", "sifive,gpio0";
> + interrupt-parent = <&plic0>;
> + interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>,
> + <30>, <31>, <32>, <33>, <34>, <35>, <36>,
> + <37>, <38>;
> + reg = <0x0 0x10060000 0x0 0x1000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&prci PRCI_CLK_PCLK>;
> + status = "disabled";
> + };
> + };
> +};
Regards,
Bin
next prev parent reply other threads:[~2020-12-10 13:39 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-08 4:55 [PATCH v2 0/9] arch: riscv: add board and SoC DT file support Yash Shah
2020-12-08 4:55 ` [PATCH v2 1/9] dt-bindings: riscv: Update DT binding docs to support SiFive FU740 SoC Yash Shah
2020-12-10 3:55 ` Rob Herring
2020-12-10 13:34 ` Bin Meng
2020-12-08 4:55 ` [PATCH v2 2/9] dt-bindings: spi: " Yash Shah
2020-12-08 4:55 ` [PATCH v2 3/9] dt-bindings: pwm: " Yash Shah
2020-12-10 3:56 ` Rob Herring
2020-12-08 4:55 ` [PATCH v2 4/9] dt-bindings: serial: " Yash Shah
2020-12-10 3:56 ` Rob Herring
2020-12-08 4:55 ` [PATCH v2 5/9] dt-bindings: gpio: " Yash Shah
2020-12-10 3:57 ` Rob Herring
2020-12-08 4:55 ` [PATCH v2 6/9] dt-bindings: i2c: " Yash Shah
2020-12-10 3:59 ` Rob Herring
2020-12-22 3:23 ` Palmer Dabbelt
2020-12-08 4:55 ` [PATCH v2 7/9] riscv: dts: add initial support for the SiFive FU740-C000 SoC Yash Shah
2020-12-10 13:34 ` Bin Meng [this message]
2020-12-16 5:24 ` Yash Shah
2020-12-16 6:06 ` Bin Meng
2020-12-16 6:12 ` Yash Shah
2020-12-08 4:55 ` [PATCH v2 8/9] dt-bindings: riscv: Update YAML doc to support SiFive HiFive Unmatched board Yash Shah
2020-12-10 3:59 ` Rob Herring
2020-12-10 13:34 ` Bin Meng
2020-12-08 4:55 ` [PATCH v2 9/9] riscv: dts: add initial board data for the SiFive HiFive Unmatched Yash Shah
2020-12-10 13:34 ` Bin Meng
2020-12-08 17:11 ` (subset) [PATCH v2 0/9] arch: riscv: add board and SoC DT file support Mark Brown
2020-12-22 4:38 ` Palmer Dabbelt
2021-01-08 3:12 ` Palmer Dabbelt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAEUhbmURfwMYo6FTuL7TP7daSuhBOOpcZX-mfCxCTVS+QiaHqA@mail.gmail.com \
--to=bmeng.cn@gmail.com \
--cc=andrew@lunn.ch \
--cc=aou@eecs.berkeley.edu \
--cc=bgolaszewski@baylibre.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=peter@korsgaard.com \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
--cc=yash.shah@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).