[PATCH v3 13/15] dt-bindings: remoteproc: qcom,qcs404-pas: split into separate file

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

Split QCS404 remote processor Peripheral Authentication Service bindings
into their own file to reduce complexity and make maintenance easier.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v2:
1. New patch.
---
 .../bindings/remoteproc/qcom,adsp.yaml        | 12 ---
 .../bindings/remoteproc/qcom,qcs404-pas.yaml  | 86 +++++++++++++++++++
 2 files changed, 86 insertions(+), 12 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index 10c96445da11..9fdfa9476ca9 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -22,9 +22,6 @@ properties:
       - qcom,msm8996-slpi-pil
       - qcom,msm8998-adsp-pas
       - qcom,msm8998-slpi-pas
-      - qcom,qcs404-adsp-pas
-      - qcom,qcs404-cdsp-pas
-      - qcom,qcs404-wcss-pas
       - qcom,sc7180-mpss-pas
       - qcom,sc7280-mpss-pas
       - qcom,sdm660-adsp-pas
@@ -61,9 +58,6 @@ allOf:
               - qcom,msm8996-adsp-pil
               - qcom,msm8996-slpi-pil
               - qcom,msm8998-adsp-pas
-              - qcom,qcs404-adsp-pas
-              - qcom,qcs404-cdsp-pas
-              - qcom,qcs404-wcss-pas
               - qcom,sc7180-mpss-pas
               - qcom,sc7280-mpss-pas
               - qcom,sdm845-adsp-pas
@@ -105,9 +99,6 @@ allOf:
               - qcom,msm8996-slpi-pil
               - qcom,msm8998-adsp-pas
               - qcom,msm8998-slpi-pas
-              - qcom,qcs404-adsp-pas
-              - qcom,qcs404-cdsp-pas
-              - qcom,qcs404-wcss-pas
               - qcom,sdm845-adsp-pas
               - qcom,sdm845-cdsp-pas
     then:
@@ -223,9 +214,6 @@ allOf:
               - qcom,msm8996-slpi-pil
               - qcom,msm8998-adsp-pas
               - qcom,msm8998-slpi-pas
-              - qcom,qcs404-adsp-pas
-              - qcom,qcs404-cdsp-pas
-              - qcom,qcs404-wcss-pas
               - qcom,sdm660-adsp-pas
     then:
       properties:
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml
new file mode 100644
index 000000000000..007349ef51ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,qcs404-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCS404 Peripheral Authentication Service
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm QCS404 SoC Peripheral Authentication Service loads and boots
+  firmware on the Qualcomm DSP Hexagon cores.
+
+properties:
+  compatible:
+    enum:
+      - qcom,qcs404-adsp-pas
+      - qcom,qcs404-cdsp-pas
+      - qcom,qcs404-wcss-pas
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  interrupts:
+    maxItems: 5
+
+  interrupt-names:
+    maxItems: 5
+
+  power-domains: false
+  power-domain-names: false
+  smd-edge: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    remoteproc@c700000 {
+        compatible = "qcom,qcs404-adsp-pas";
+        reg = <0x0c700000 0x4040>;
+
+        clocks = <&xo_board>;
+        clock-names = "xo";
+
+        interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>,
+                              <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready",
+                          "handover", "stop-ack";
+
+        memory-region = <&adsp_fw_mem>;
+
+        qcom,smem-states = <&adsp_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        glink-edge {
+            interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+
+            qcom,remote-pid = <2>;
+            mboxes = <&apcs_glb 8>;
+
+            label = "adsp";
+        };
+    };
-- 
2.34.1