From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Manivannan Sadhasivam <mani@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v3 14/15] dt-bindings: remoteproc: qcom,sc7180-pas: split into separate file
Date: Thu, 24 Nov 2022 19:43:32 +0100 [thread overview]
Message-ID: <20221124184333.133911-15-krzysztof.kozlowski@linaro.org> (raw)
In-Reply-To: <20221124184333.133911-1-krzysztof.kozlowski@linaro.org>
Split SC7180 and SC7280remote processor Peripheral Authentication
Service bindings into their own file to reduce complexity and make
maintenance easier.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes since v2:
1. New patch.
---
.../bindings/remoteproc/qcom,adsp.yaml | 54 --------
.../bindings/remoteproc/qcom,sc7180-pas.yaml | 125 ++++++++++++++++++
2 files changed, 125 insertions(+), 54 deletions(-)
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index 9fdfa9476ca9..7848d1d658f4 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -22,8 +22,6 @@ properties:
- qcom,msm8996-slpi-pil
- qcom,msm8998-adsp-pas
- qcom,msm8998-slpi-pas
- - qcom,sc7180-mpss-pas
- - qcom,sc7280-mpss-pas
- qcom,sdm660-adsp-pas
- qcom,sdm845-adsp-pas
- qcom,sdm845-cdsp-pas
@@ -58,8 +56,6 @@ allOf:
- qcom,msm8996-adsp-pil
- qcom,msm8996-slpi-pil
- qcom,msm8998-adsp-pas
- - qcom,sc7180-mpss-pas
- - qcom,sc7280-mpss-pas
- qcom,sdm845-adsp-pas
- qcom,sdm845-cdsp-pas
then:
@@ -108,20 +104,6 @@ allOf:
interrupt-names:
maxItems: 5
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,sc7180-mpss-pas
- - qcom,sc7280-mpss-pas
- then:
- properties:
- interrupts:
- minItems: 6
- interrupt-names:
- minItems: 6
-
- if:
properties:
compatible:
@@ -167,42 +149,6 @@ allOf:
required:
- px-supply
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,sc7180-mpss-pas
- then:
- properties:
- power-domains:
- items:
- - description: CX power domain
- - description: MX power domain
- - description: MSS power domain
- power-domain-names:
- items:
- - const: cx
- - const: mx
- - const: mss
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,sc7280-mpss-pas
- then:
- properties:
- power-domains:
- items:
- - description: CX power domain
- - description: MSS power domain
- power-domain-names:
- items:
- - const: cx
- - const: mss
-
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml
new file mode 100644
index 000000000000..6fd768609a66
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7180-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7180/SC7280 Peripheral Authentication Service
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+ Qualcomm SC7180/SC7280 SoC Peripheral Authentication Service loads and boots
+ firmware on the Qualcomm DSP Hexagon cores.
+
+properties:
+ compatible:
+ enum:
+ - qcom,sc7180-mpss-pas
+ - qcom,sc7280-mpss-pas
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: XO clock
+
+ clock-names:
+ items:
+ - const: xo
+
+ interrupts:
+ minItems: 6
+
+ interrupt-names:
+ minItems: 6
+
+ power-domains:
+ minItems: 2
+ items:
+ - description: CX power domain
+ - description: MX power domain
+ - description: MSS power domain
+
+ power-domain-names:
+ minItems: 2
+ items:
+ - const: cx
+ - const: mx
+ - const: mss
+
+ qcom,qmp:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Reference to the AOSS side-channel message RAM.
+
+ smd-edge: false
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sc7180-mpss-pas
+ then:
+ properties:
+ power-domains:
+ minItems: 3
+ power-domain-names:
+ minItems: 3
+ else:
+ properties:
+ power-domains:
+ maxItems: 2
+ power-domain-names:
+ maxItems: 2
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ remoteproc@4080000 {
+ compatible = "qcom,sc7180-mpss-pas";
+ reg = <0x04080000 0x4040>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover",
+ "stop-ack", "shutdown-ack";
+
+ memory-region = <&mpss_mem>;
+
+ power-domains = <&rpmhpd SC7180_CX>,
+ <&rpmhpd SC7180_MX>,
+ <&rpmhpd SC7180_MSS>;
+ power-domain-names = "cx", "mx", "mss";
+
+ qcom,qmp = <&aoss_qmp>;
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ glink-edge {
+ interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+ label = "modem";
+ qcom,remote-pid = <1>;
+ mboxes = <&apss_shared 12>;
+ };
+ };
--
2.34.1
next prev parent reply other threads:[~2022-11-24 18:45 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-24 18:43 [PATCH v3 00/15] dt-bindings: remoteproc: qcom: split and reorganize PAS/PIL Krzysztof Kozlowski
2022-11-24 18:43 ` [PATCH v3 01/15] arm64: dts: qcom: msm8996: drop address/size cells from smd-edge Krzysztof Kozlowski
2022-11-24 18:43 ` [PATCH v3 02/15] arm64: dts: qcom: qcs404: align CDSP PAS node with bindings Krzysztof Kozlowski
2022-11-24 18:43 ` [PATCH v3 03/15] arm64: dts: qcom: sc7180: align MPSS " Krzysztof Kozlowski
2022-11-24 18:43 ` [PATCH v3 04/15] arm64: dts: qcom: sc7280: " Krzysztof Kozlowski
2022-11-24 18:43 ` [PATCH v3 05/15] dt-bindings: remoteproc: qcom,adsp: drop resets and qcom,halt-regs Krzysztof Kozlowski
2022-12-05 19:44 ` Rob Herring
2022-11-24 18:43 ` [PATCH v3 06/15] dt-bindings: remoteproc: qcom,adsp: split common part Krzysztof Kozlowski
2022-12-05 19:44 ` Rob Herring
2022-11-24 18:43 ` [PATCH v3 07/15] dt-bindings: remoteproc: qcom,sm8350-pas: split into separate file Krzysztof Kozlowski
2022-12-05 19:45 ` Rob Herring
2022-11-24 18:43 ` [PATCH v3 08/15] dt-bindings: remoteproc: qcom,sm8150-pas: " Krzysztof Kozlowski
2022-12-05 19:46 ` Rob Herring
2022-12-05 19:49 ` Rob Herring
2022-12-06 7:58 ` Krzysztof Kozlowski
2022-11-24 18:43 ` [PATCH v3 09/15] dt-bindings: remoteproc: qcom,sm6350-pas: " Krzysztof Kozlowski
2022-12-05 19:50 ` Rob Herring
2022-11-24 18:43 ` [PATCH v3 10/15] dt-bindings: remoteproc: qcom,sc8280xp-pas: " Krzysztof Kozlowski
2022-12-05 19:50 ` Rob Herring
2022-11-24 18:43 ` [PATCH v3 11/15] dt-bindings: remoteproc: qcom,sc8180x-pas: " Krzysztof Kozlowski
2022-12-05 19:51 ` Rob Herring
2022-11-24 18:43 ` [PATCH v3 12/15] dt-bindings: remoteproc: qcom,sdx55-pas: " Krzysztof Kozlowski
2022-12-05 19:51 ` Rob Herring
2022-11-24 18:43 ` [PATCH v3 13/15] dt-bindings: remoteproc: qcom,qcs404-pas: " Krzysztof Kozlowski
2022-12-05 19:52 ` Rob Herring
2022-11-24 18:43 ` Krzysztof Kozlowski [this message]
2022-12-05 19:52 ` [PATCH v3 14/15] dt-bindings: remoteproc: qcom,sc7180-pas: " Rob Herring
2022-11-24 18:43 ` [PATCH v3 15/15] dt-bindings: remoteproc: qcom,adsp: correct msm8996-slpi-pil clocks Krzysztof Kozlowski
2022-12-05 19:53 ` Rob Herring
2022-12-27 18:08 ` (subset) [PATCH v3 00/15] dt-bindings: remoteproc: qcom: split and reorganize PAS/PIL Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221124184333.133911-15-krzysztof.kozlowski@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mani@kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).