linux-riscv.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: atish.patra@wdc.com (Atish Patra)
To: linux-riscv@lists.infradead.org
Subject: [RFC 1/4] pwm: sifive: Add DT documentation for SiFive PWM Controller.
Date: Tue,  9 Oct 2018 11:51:22 -0700	[thread overview]
Message-ID: <1539111085-25502-2-git-send-email-atish.patra@wdc.com> (raw)
In-Reply-To: <1539111085-25502-1-git-send-email-atish.patra@wdc.com>

From: "Wesley W. Terpstra" <wesley@sifive.com>

DT documentation for PWM controller added with updated compatible
string.

Signed-off-by: Wesley W. Terpstra <wesley@sifive.com>
[Atish: Compatible string update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 .../devicetree/bindings/pwm/pwm-sifive.txt         | 32 ++++++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pwm/pwm-sifive.txt

diff --git a/Documentation/devicetree/bindings/pwm/pwm-sifive.txt b/Documentation/devicetree/bindings/pwm/pwm-sifive.txt
new file mode 100644
index 00000000..532b10fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-sifive.txt
@@ -0,0 +1,32 @@
+SiFive PWM controller
+
+Unlike most other PWM controllers, the SiFive PWM controller currently only
+supports one period for all channels in the PWM. This is set globally in DTS.
+The period also has significant restrictions on the values it can achieve,
+which the driver rounds to the nearest achievable frequency.
+
+Required properties:
+- compatible: should be one of
+	"sifive,fu540-c000-pwm0","sifive,pwm0".
+	PWM controller is HiFive Unleashed specific chip which warrants a
+	specific compatible string. The second string is kept for backward
+	compatibility until a firmware update with latest compatible string.
+- reg: physical base address and length of the controller's registers
+- clocks: The frequency the controller runs at
+- #pwm-cells: Should be 2.
+  The first cell is the PWM channel number
+  The second cell is the PWM polarity
+- sifive,approx-period: the driver will get as close to this period as it can
+- interrupts: one interrupt per PWM channel (currently unused in the driver)
+
+Examples:
+
+pwm:  pwm at 10020000 {
+	compatible = "sifive,fu540-c000-pwm0","sifive,pwm0";
+	reg = <0x0 0x10020000 0x0 0x1000>;
+	clocks = <&tlclk>;
+	interrupt-parent = <&plic>;
+	interrupts = <42 43 44 45>;
+	#pwm-cells = <2>;
+	sifive,approx-period = <1000000>;
+};
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: Atish Patra <atish.patra@wdc.com>
To: palmer@sifive.com, linux-riscv@lists.infradead.org,
	linux-pwm@vger.kernel.org, linux-gpio@vger.kernel.org
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
	linus.walleij@linaro.org, linux-kernel@vger.kernel.org,
	hch@infradead.org, atish.patra@wdc.com, robh+dt@kernel.org,
	thierry.reding@gmail.com
Subject: [RFC 1/4] pwm: sifive: Add DT documentation for SiFive PWM Controller.
Date: Tue,  9 Oct 2018 11:51:22 -0700	[thread overview]
Message-ID: <1539111085-25502-2-git-send-email-atish.patra@wdc.com> (raw)
Message-ID: <20181009185122.WB5aLUtOJ36cNtc92YBQj68CkAM4N9WnT7_ng4eJ_5E@z> (raw)
In-Reply-To: <1539111085-25502-1-git-send-email-atish.patra@wdc.com>

From: "Wesley W. Terpstra" <wesley@sifive.com>

DT documentation for PWM controller added with updated compatible
string.

Signed-off-by: Wesley W. Terpstra <wesley@sifive.com>
[Atish: Compatible string update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
---
 .../devicetree/bindings/pwm/pwm-sifive.txt         | 32 ++++++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pwm/pwm-sifive.txt

diff --git a/Documentation/devicetree/bindings/pwm/pwm-sifive.txt b/Documentation/devicetree/bindings/pwm/pwm-sifive.txt
new file mode 100644
index 00000000..532b10fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-sifive.txt
@@ -0,0 +1,32 @@
+SiFive PWM controller
+
+Unlike most other PWM controllers, the SiFive PWM controller currently only
+supports one period for all channels in the PWM. This is set globally in DTS.
+The period also has significant restrictions on the values it can achieve,
+which the driver rounds to the nearest achievable frequency.
+
+Required properties:
+- compatible: should be one of
+	"sifive,fu540-c000-pwm0","sifive,pwm0".
+	PWM controller is HiFive Unleashed specific chip which warrants a
+	specific compatible string. The second string is kept for backward
+	compatibility until a firmware update with latest compatible string.
+- reg: physical base address and length of the controller's registers
+- clocks: The frequency the controller runs at
+- #pwm-cells: Should be 2.
+  The first cell is the PWM channel number
+  The second cell is the PWM polarity
+- sifive,approx-period: the driver will get as close to this period as it can
+- interrupts: one interrupt per PWM channel (currently unused in the driver)
+
+Examples:
+
+pwm:  pwm@10020000 {
+	compatible = "sifive,fu540-c000-pwm0","sifive,pwm0";
+	reg = <0x0 0x10020000 0x0 0x1000>;
+	clocks = <&tlclk>;
+	interrupt-parent = <&plic>;
+	interrupts = <42 43 44 45>;
+	#pwm-cells = <2>;
+	sifive,approx-period = <1000000>;
+};
-- 
2.7.4


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  parent reply	other threads:[~2018-10-09 18:51 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-09 18:51 [RFC 0/4] GPIO & PWM support for HiFive Unleashed Atish Patra
2018-10-09 18:51 ` Atish Patra
2018-10-09 18:51 ` Atish Patra [this message]
2018-10-09 18:51   ` [RFC 1/4] pwm: sifive: Add DT documentation for SiFive PWM Controller Atish Patra
2018-10-10 13:49   ` Thierry Reding
2018-10-10 13:49     ` Thierry Reding
2018-10-15 22:57     ` Atish Patra
2018-10-15 22:57       ` Atish Patra
2018-10-15 23:19       ` Wesley Terpstra
2018-10-15 23:19         ` Wesley Terpstra
2018-10-16 11:13         ` Thierry Reding
2018-10-16 11:13           ` Thierry Reding
2018-10-16 11:01       ` Thierry Reding
2018-10-16 11:01         ` Thierry Reding
2018-10-16 17:31         ` Paul Walmsley
2018-10-16 17:31           ` Paul Walmsley
2018-10-16 22:04           ` Thierry Reding
2018-10-16 22:04             ` Thierry Reding
2018-10-16 22:20             ` Atish Patra
2018-10-16 22:20               ` Atish Patra
2018-10-17 15:58               ` Rob Herring
2018-10-17 15:58                 ` Rob Herring
2018-10-17 21:45                 ` Atish Patra
2018-10-17 21:45                   ` Atish Patra
2018-11-10  5:38             ` Paul Walmsley
2018-11-10  5:38               ` Paul Walmsley
2018-10-10 13:51   ` Thierry Reding
2018-10-10 13:51     ` Thierry Reding
2018-10-15 22:45     ` Atish Patra
2018-10-15 22:45       ` Atish Patra
2018-10-16 10:51       ` Thierry Reding
2018-10-16 10:51         ` Thierry Reding
2018-10-16 22:42         ` Atish Patra
2018-10-16 22:42           ` Atish Patra
2018-10-09 18:51 ` [RFC 2/4] pwm: sifive: Add a driver for SiFive SoC PWM Atish Patra
2018-10-09 18:51   ` Atish Patra
2018-10-10 13:11   ` Christoph Hellwig
2018-10-10 13:11     ` Christoph Hellwig
2018-10-10 13:44     ` Thierry Reding
2018-10-10 13:44       ` Thierry Reding
2018-10-16  6:28     ` Atish Patra
2018-10-16  6:28       ` Atish Patra
2018-10-10 14:13   ` Thierry Reding
2018-10-10 14:13     ` Thierry Reding
2018-10-16  6:24     ` Atish Patra
2018-10-16  6:24       ` Atish Patra
2018-10-09 18:51 ` [RFC 3/4] gpio: sifive: Add DT documentation for SiFive GPIO Atish Patra
2018-10-09 18:51   ` Atish Patra
2018-10-09 18:51 ` [RFC 4/4] gpio: sifive: Add GPIO driver for SiFive SoCs Atish Patra
2018-10-09 18:51   ` Atish Patra
2018-10-10 12:35   ` Linus Walleij
2018-10-10 12:35     ` Linus Walleij
2018-10-17  1:01     ` Atish Patra
2018-10-17  1:01       ` Atish Patra
2019-09-18  7:32       ` Bin Meng
2018-10-10 13:01   ` Andreas Schwab
2018-10-10 13:01     ` Andreas Schwab
2018-10-10 13:12     ` Christoph Hellwig
2018-10-10 13:12       ` Christoph Hellwig
2018-10-10 13:28       ` Andreas Schwab
2018-10-10 13:28         ` Andreas Schwab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1539111085-25502-2-git-send-email-atish.patra@wdc.com \
    --to=atish.patra@wdc.com \
    --cc=linux-riscv@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).