From: Don Brace <don.brace@microchip.com>
To: <Kevin.Barnett@microchip.com>, <scott.teel@microchip.com>,
<Justin.Lindley@microchip.com>, <scott.benesh@microchip.com>,
<gerry.morong@microchip.com>, <mahesh.rajashekhara@microchip.com>,
<hch@infradead.org>, <jejb@linux.vnet.ibm.com>,
<joseph.szczypek@hpe.com>, <POSWALD@suse.com>
Cc: <linux-scsi@vger.kernel.org>
Subject: [PATCH V3 19/25] smartpqi: add phy id support for the physical drives
Date: Thu, 10 Dec 2020 14:36:10 -0600 [thread overview]
Message-ID: <160763257085.26927.11572432608178521227.stgit@brunhilda> (raw)
In-Reply-To: <160763241302.26927.17487238067261230799.stgit@brunhilda>
From: Murthy Bhat <Murthy.Bhat@microchip.com>
* Display topology using PHY numbers.
* PHY(both local and remote) numbers corresponding to physical drives
are read from BMIC_IDENTIFY_PHYSICAL_DEVICE.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
---
drivers/scsi/smartpqi/smartpqi.h | 1 +
drivers/scsi/smartpqi/smartpqi_init.c | 10 ++++++++++
drivers/scsi/smartpqi/smartpqi_sas_transport.c | 1 +
3 files changed, 12 insertions(+)
diff --git a/drivers/scsi/smartpqi/smartpqi.h b/drivers/scsi/smartpqi/smartpqi.h
index c3b103b15924..8220957bc69b 100644
--- a/drivers/scsi/smartpqi/smartpqi.h
+++ b/drivers/scsi/smartpqi/smartpqi.h
@@ -1089,6 +1089,7 @@ struct pqi_scsi_dev {
u8 phy_connected_dev_type;
u8 box[8];
u16 phys_connector[8];
+ u8 phy_id;
bool raid_bypass_configured; /* RAID bypass configured */
bool raid_bypass_enabled; /* RAID bypass enabled */
u32 next_bypass_group;
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index f6bc7d9850e0..6b624413c8e6 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -1435,6 +1435,8 @@ static void pqi_get_volume_status(struct pqi_ctrl_info *ctrl_info,
device->volume_offline = volume_offline;
}
+#define PQI_DEVICE_PHY_MAP_SUPPORTED 0x10
+
static int pqi_get_physical_device_info(struct pqi_ctrl_info *ctrl_info,
struct pqi_scsi_dev *device,
struct bmic_identify_physical_device *id_phys)
@@ -1474,6 +1476,13 @@ static int pqi_get_physical_device_info(struct pqi_ctrl_info *ctrl_info,
memcpy(&device->page_83_identifier, &id_phys->page_83_identifier,
sizeof(device->page_83_identifier));
+ if ((id_phys->even_more_flags & PQI_DEVICE_PHY_MAP_SUPPORTED) &&
+ id_phys->phy_count)
+ device->phy_id =
+ id_phys->phy_to_phy_map[device->active_path_index];
+ else
+ device->phy_id = 0xFF;
+
return 0;
}
@@ -1840,6 +1849,7 @@ static void pqi_scsi_update_device(struct pqi_scsi_dev *existing_device,
existing_device->aio_handle = new_device->aio_handle;
existing_device->volume_status = new_device->volume_status;
existing_device->active_path_index = new_device->active_path_index;
+ existing_device->phy_id = new_device->phy_id;
existing_device->path_map = new_device->path_map;
existing_device->bay = new_device->bay;
existing_device->box_index = new_device->box_index;
diff --git a/drivers/scsi/smartpqi/smartpqi_sas_transport.c b/drivers/scsi/smartpqi/smartpqi_sas_transport.c
index 77923c6ec2c6..71e83d5fdd02 100644
--- a/drivers/scsi/smartpqi/smartpqi_sas_transport.c
+++ b/drivers/scsi/smartpqi/smartpqi_sas_transport.c
@@ -92,6 +92,7 @@ static int pqi_sas_port_add_rphy(struct pqi_sas_port *pqi_sas_port,
identify = &rphy->identify;
identify->sas_address = pqi_sas_port->sas_address;
+ identify->phy_identifier = pqi_sas_port->device->phy_id;
if (pqi_sas_port->device &&
pqi_sas_port->device->is_expander_smp_device) {
next prev parent reply other threads:[~2020-12-10 20:38 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-10 20:34 [PATCH V3 00/25] smartpqi updates Don Brace
2020-12-10 20:34 ` [PATCH V3 01/25] smartpqi: add support for product id Don Brace
2021-01-07 16:43 ` Martin Wilck
2020-12-10 20:34 ` [PATCH V3 02/25] smartpqi: refactor aio submission code Don Brace
2021-01-07 16:43 ` Martin Wilck
2020-12-10 20:34 ` [PATCH V3 03/25] smartpqi: refactor build sg list code Don Brace
2021-01-07 16:43 ` Martin Wilck
2020-12-10 20:34 ` [PATCH V3 04/25] smartpqi: add support for raid5 and raid6 writes Don Brace
2021-01-07 16:44 ` Martin Wilck
2021-01-08 22:56 ` Don.Brace
2021-01-13 10:26 ` Martin Wilck
2020-12-10 20:34 ` [PATCH V3 05/25] smartpqi: add support for raid1 writes Don Brace
2021-01-07 16:44 ` Martin Wilck
2021-01-09 16:56 ` Don.Brace
2020-12-10 20:34 ` [PATCH V3 06/25] smartpqi: add support for BMIC sense feature cmd and feature bits Don Brace
2021-01-07 16:44 ` Martin Wilck
2021-01-11 17:22 ` Don.Brace
2021-01-22 16:45 ` Don.Brace
2021-01-22 19:04 ` Martin Wilck
2020-12-10 20:35 ` [PATCH V3 07/25] smartpqi: update AIO Sub Page 0x02 support Don Brace
2021-01-07 16:44 ` Martin Wilck
2021-01-11 20:53 ` Don.Brace
2020-12-10 20:35 ` [PATCH V3 08/25] smartpqi: add support for long firmware version Don Brace
2021-01-07 16:45 ` Martin Wilck
2021-01-11 22:25 ` Don.Brace
2021-01-22 20:01 ` Don.Brace
2020-12-10 20:35 ` [PATCH V3 09/25] smartpqi: align code with oob driver Don Brace
2021-01-08 0:13 ` Martin Wilck
2020-12-10 20:35 ` [PATCH V3 10/25] smartpqi: add stream detection Don Brace
2021-01-08 0:14 ` Martin Wilck
2021-01-15 21:58 ` Don.Brace
2020-12-10 20:35 ` [PATCH V3 11/25] smartpqi: add host level stream detection enable Don Brace
2021-01-08 0:13 ` Martin Wilck
2021-01-12 20:28 ` Don.Brace
2020-12-10 20:35 ` [PATCH V3 12/25] smartpqi: enable support for NVMe encryption Don Brace
2021-01-08 0:14 ` Martin Wilck
2020-12-10 20:35 ` [PATCH V3 13/25] smartpqi: disable write_same for nvme hba disks Don Brace
2021-01-08 0:13 ` Martin Wilck
2020-12-10 20:35 ` [PATCH V3 14/25] smartpqi: fix driver synchronization issues Don Brace
2021-01-07 23:32 ` Martin Wilck
2021-01-08 4:13 ` Martin K. Petersen
2021-01-15 21:13 ` Don.Brace
2021-01-27 23:01 ` Don.Brace
[not found] ` <c1e6b199f5ccda5ccec5223dfcbd1fba22171c86.camel@suse.com>
2021-02-01 22:47 ` Don.Brace
2020-12-10 20:35 ` [PATCH V3 15/25] smartpqi: fix host qdepth limit Don Brace
2020-12-14 17:54 ` Paul Menzel
2020-12-15 20:23 ` Don.Brace
2021-01-07 23:43 ` Martin Wilck
2021-01-15 21:17 ` Don.Brace
2021-01-19 10:33 ` John Garry
2021-01-19 14:12 ` Martin Wilck
2021-01-19 17:43 ` Paul Menzel
2021-01-20 16:42 ` Donald Buczek
2021-01-20 17:03 ` Don.Brace
2021-01-20 18:35 ` Martin Wilck
2021-02-10 15:27 ` Don.Brace
2021-02-10 15:42 ` John Garry
2021-02-10 16:29 ` Don.Brace
2021-03-29 21:15 ` Paul Menzel
2021-03-29 21:16 ` Paul Menzel
2021-03-30 14:37 ` Donald Buczek
2020-12-10 20:35 ` [PATCH V3 16/25] smartpqi: convert snprintf to scnprintf Don Brace
2021-01-07 23:51 ` Martin Wilck
2020-12-10 20:35 ` [PATCH V3 17/25] smartpqi: change timing of release of QRM memory during OFA Don Brace
2021-01-08 0:14 ` Martin Wilck
2021-01-27 17:46 ` Don.Brace
2020-12-10 20:36 ` [PATCH V3 18/25] smartpqi: return busy indication for IOCTLs when ofa is active Don Brace
2020-12-10 20:36 ` Don Brace [this message]
2021-01-08 0:03 ` [PATCH V3 19/25] smartpqi: add phy id support for the physical drives Martin Wilck
2020-12-10 20:36 ` [PATCH V3 20/25] smartpqi: update sas initiator_port_protocols and target_port_protocols Don Brace
2021-01-08 0:12 ` Martin Wilck
2020-12-10 20:36 ` [PATCH V3 21/25] smartpqi: add additional logging for LUN resets Don Brace
2021-01-08 0:27 ` Martin Wilck
2021-01-25 17:09 ` Don.Brace
2020-12-10 20:36 ` [PATCH V3 22/25] smartpqi: update enclosure identifier in sysf Don Brace
2021-01-08 0:30 ` Martin Wilck
2021-01-25 17:13 ` Don.Brace
2021-01-25 19:44 ` Martin Wilck
2021-01-25 20:36 ` Don.Brace
2020-12-10 20:36 ` [PATCH V3 23/25] smartpqi: correct system hangs when resuming from hibernation Don Brace
2021-01-08 0:34 ` Martin Wilck
2021-01-27 17:39 ` Don.Brace
2021-01-27 17:45 ` Martin Wilck
2020-12-10 20:36 ` [PATCH V3 24/25] smartpqi: add new pci ids Don Brace
2021-01-08 0:35 ` Martin Wilck
2020-12-10 20:36 ` [PATCH V3 25/25] smartpqi: update version to 2.1.6-005 Don Brace
2020-12-21 14:31 ` [PATCH V3 00/25] smartpqi updates Donald Buczek
[not found] ` <SN6PR11MB2848D8C9DF9856A2B7AA69ACE1C00@SN6PR11MB2848.namprd11.prod.outlook.com>
2020-12-22 13:13 ` Donald Buczek
2020-12-28 15:57 ` Don.Brace
2020-12-28 19:25 ` Don.Brace
2020-12-28 22:36 ` Donald Buczek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=160763257085.26927.11572432608178521227.stgit@brunhilda \
--to=don.brace@microchip.com \
--cc=Justin.Lindley@microchip.com \
--cc=Kevin.Barnett@microchip.com \
--cc=POSWALD@suse.com \
--cc=gerry.morong@microchip.com \
--cc=hch@infradead.org \
--cc=jejb@linux.vnet.ibm.com \
--cc=joseph.szczypek@hpe.com \
--cc=linux-scsi@vger.kernel.org \
--cc=mahesh.rajashekhara@microchip.com \
--cc=scott.benesh@microchip.com \
--cc=scott.teel@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).