linux-tegra.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mikko Perttunen <mperttunen@nvidia.com>
To: thierry.reding@gmail.com, jonathanh@nvidia.com, digetx@gmail.com,
	airlied@linux.ie, daniel@ffwll.ch
Cc: linux-tegra@vger.kernel.org, dri-devel@lists.freedesktop.org,
	talho@nvidia.com, bhuntsman@nvidia.com,
	Mikko Perttunen <mperttunen@nvidia.com>
Subject: [PATCH v3 07/20] gpu: host1x: Introduce UAPI header
Date: Wed,  7 Oct 2020 20:12:25 +0300	[thread overview]
Message-ID: <20201007171238.1795964-8-mperttunen@nvidia.com> (raw)
In-Reply-To: <20201007171238.1795964-1-mperttunen@nvidia.com>

Add the userspace interface header, specifying interfaces
for allocating and accessing syncpoints from userspace,
and for creating sync_file based fences based on syncpoint
thresholds.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
---
 include/uapi/linux/host1x.h | 134 ++++++++++++++++++++++++++++++++++++
 1 file changed, 134 insertions(+)
 create mode 100644 include/uapi/linux/host1x.h

diff --git a/include/uapi/linux/host1x.h b/include/uapi/linux/host1x.h
new file mode 100644
index 000000000000..9c8fb9425cb2
--- /dev/null
+++ b/include/uapi/linux/host1x.h
@@ -0,0 +1,134 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* Copyright (c) 2020 NVIDIA Corporation */
+
+#ifndef _UAPI__LINUX_HOST1X_H
+#define _UAPI__LINUX_HOST1X_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+struct host1x_allocate_syncpoint {
+	/**
+	 * @fd: [out]
+	 *
+	 * New file descriptor representing the allocated syncpoint.
+	 */
+	__s32 fd;
+
+	__u32 reserved[3];
+};
+
+struct host1x_syncpoint_info {
+	/**
+	 * @id: [out]
+	 *
+	 * System-global ID of the syncpoint.
+	 */
+	__u32 id;
+
+	__u32 reserved[3];
+};
+
+struct host1x_syncpoint_increment {
+	/**
+	 * @count: [in]
+	 *
+	 * Number of times to increment the syncpoint. The syncpoint can
+	 * be observed at in-between values, but each increment is atomic.
+	 */
+	__u32 count;
+};
+
+struct host1x_read_syncpoint {
+	/**
+	 * @id: [in]
+	 *
+	 * ID of the syncpoint to read.
+	 */
+	__u32 id;
+
+	/**
+	 * @value: [out]
+	 *
+	 * Current value of the syncpoint.
+	 */
+	__u32 value;
+};
+
+struct host1x_create_fence {
+	/**
+	 * @id: [in]
+	 *
+	 * ID of the syncpoint to create a fence for.
+	 */
+	__u32 id;
+
+	/**
+	 * @threshold: [in]
+	 *
+	 * When the syncpoint reaches this value, the fence will be signaled.
+	 * The syncpoint is considered to have reached the threshold when the
+	 * following condition is true:
+	 *
+	 * 	((value - threshold) & 0x80000000U) == 0U
+	 *
+	 */
+	__u32 threshold;
+
+	/**
+	 * @fence_fd: [out]
+	 *
+	 * New sync_file file descriptor containing the created fence.
+	 */
+	__s32 fence_fd;
+
+	__u32 reserved[1];
+};
+
+struct host1x_fence_extract_fence {
+	__u32 id;
+	__u32 threshold;
+};
+
+struct host1x_fence_extract {
+	/**
+	 * @fence_fd: [in]
+	 *
+	 * sync_file file descriptor
+	 */
+	__s32 fence_fd;
+
+	/**
+	 * @num_fences: [in,out]
+	 *
+	 * In: size of the `fences_ptr` array counted in elements.
+	 * Out: required size of the `fences_ptr` array counted in elements.
+	 */
+	__u32 num_fences;
+
+	/**
+	 * @fences_ptr: [in]
+	 *
+	 * Pointer to array of `struct host1x_fence_extract_fence`.
+	 */
+	__u64 fences_ptr;
+
+	__u32 reserved[2];
+};
+
+#define HOST1X_IOCTL_ALLOCATE_SYNCPOINT  _IOWR('X', 0x00, struct host1x_allocate_syncpoint)
+#define HOST1X_IOCTL_READ_SYNCPOINT      _IOR ('X', 0x01, struct host1x_read_syncpoint)
+#define HOST1X_IOCTL_CREATE_FENCE        _IOWR('X', 0x02, struct host1x_create_fence)
+#define HOST1X_IOCTL_SYNCPOINT_INFO      _IOWR('X', 0x03, struct host1x_syncpoint_info)
+#define HOST1X_IOCTL_SYNCPOINT_INCREMENT _IOWR('X', 0x04, struct host1x_syncpoint_increment)
+#define HOST1X_IOCTL_FENCE_EXTRACT       _IOWR('X', 0x05, struct host1x_fence_extract)
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif
-- 
2.28.0


  parent reply	other threads:[~2020-10-07 17:17 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-07 17:12 [PATCH v3 00/20] Host1x/TegraDRM UAPI Mikko Perttunen
2020-10-07 17:12 ` [PATCH v3 01/20] gpu: host1x: Use different lock classes for each client Mikko Perttunen
2020-10-07 17:12 ` [PATCH v3 02/20] gpu: host1x: Allow syncpoints without associated client Mikko Perttunen
2020-10-07 17:12 ` [PATCH v3 03/20] gpu: host1x: Show number of pending waiters in debugfs Mikko Perttunen
2020-10-07 17:12 ` [PATCH v3 04/20] gpu: host1x: Remove cancelled waiters immediately Mikko Perttunen
2020-10-07 17:12 ` [PATCH v3 05/20] gpu: host1x: Use HW-equivalent syncpoint expiration check Mikko Perttunen
2020-10-07 17:12 ` [PATCH v3 06/20] gpu: host1x: Cleanup and refcounting for syncpoints Mikko Perttunen
2020-10-07 22:23   ` kernel test robot
2020-10-07 17:12 ` Mikko Perttunen [this message]
2020-10-07 17:12 ` [PATCH v3 08/20] gpu: host1x: Implement /dev/host1x device node Mikko Perttunen
2020-10-07 17:12 ` [PATCH v3 09/20] gpu: host1x: DMA fences and userspace fence creation Mikko Perttunen
2020-10-07 23:13   ` kernel test robot
2020-10-08 11:13   ` kernel test robot
2020-10-07 17:12 ` [PATCH v3 10/20] gpu: host1x: Add no-recovery mode Mikko Perttunen
2020-10-07 17:12 ` [PATCH v3 11/20] gpu: host1x: Add job release callback Mikko Perttunen
2020-10-07 17:12 ` [PATCH v3 12/20] gpu: host1x: Add support for syncpoint waits in CDMA pushbuffer Mikko Perttunen
2020-10-07 17:12 ` [PATCH v3 13/20] gpu: host1x: Reset max value when freeing a syncpoint Mikko Perttunen
2020-10-07 17:12 ` [PATCH v3 14/20] gpu: host1x: Reserve VBLANK syncpoints at initialization Mikko Perttunen
2020-10-07 17:12 ` [PATCH v3 15/20] drm/tegra: Add new UAPI to header Mikko Perttunen
2020-10-07 17:12 ` [PATCH v3 16/20] drm/tegra: Boot VIC during runtime PM resume Mikko Perttunen
2020-10-07 17:12 ` [PATCH v3 17/20] drm/tegra: Set resv fields when importing/exporting GEMs Mikko Perttunen
2020-10-07 17:12 ` [PATCH v3 18/20] drm/tegra: Allocate per-engine channel in core code Mikko Perttunen
2020-10-07 17:12 ` [PATCH v3 19/20] drm/tegra: Implement new UAPI Mikko Perttunen
2020-10-08  3:42   ` kernel test robot
2020-10-19  2:21   ` Dmitry Osipenko
2020-10-19  8:13     ` Mikko Perttunen
2020-10-19 17:27       ` Dmitry Osipenko
2020-10-20  9:18         ` Mikko Perttunen
2020-10-22  4:20           ` Dmitry Osipenko
2020-10-26  9:11             ` Mikko Perttunen
2020-10-27 19:06               ` Dmitry Osipenko
2020-10-28  9:54                 ` Mikko Perttunen
2020-10-30 23:13                   ` Dmitry Osipenko
2020-11-09 14:53                     ` Mikko Perttunen
2020-11-12 18:35                       ` Dmitry Osipenko
2020-10-20 11:40         ` Daniel Vetter
2020-10-20 12:51           ` Mikko Perttunen
2020-10-07 17:12 ` [PATCH v3 20/20] drm/tegra: Add job firewall Mikko Perttunen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201007171238.1795964-8-mperttunen@nvidia.com \
    --to=mperttunen@nvidia.com \
    --cc=airlied@linux.ie \
    --cc=bhuntsman@nvidia.com \
    --cc=daniel@ffwll.ch \
    --cc=digetx@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jonathanh@nvidia.com \
    --cc=linux-tegra@vger.kernel.org \
    --cc=talho@nvidia.com \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).